summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2018-05-24xhci: xhci-mem: remove port_arrays and the code initializing themMathias Nyman2-97/+11
As we are now using the new port strtuctes the port_arrays are no longer needed, remove them completely Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci-mtk: use xhci hub structures to get number of ports in roothubsMathias Nyman1-2/+2
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: xhci-hub: use port structure members instead of xhci_get_ports()Mathias Nyman1-24/+4
xhci_get_ports() is one of the last functions using port_arrays in xhci-hub.c. We get the same data directly from hub and port structures instead, so convert and remove both xhci_get_ports() and port_arrays from all function that no longer need it. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: use port structures instead of port arrays in xhci.c functionsMathias Nyman1-28/+22
get rid of port iomem arrays and use port structures in the following functions: xhci_find_raw_port_number() xhci_disable_port_wake_on_bits() xhci_set_usb2_hardware_lpm() xhci_all_ports_seen_u0() compliance_mode_recovery() Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: change xhci_test_and_clear_bit() to use new port structureMathias Nyman3-26/+15
Don't use pointers to port array and port index as function parameters in xhci_test_and_clear_bit(), just use a pointer to the right port structure. xhci_test_and_clear_bit() was the last port_array user in xhci_get_port_status() and handle_port_status(), so remove the port_array from them as well. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: change xhci_set_link_state() to work with port structuresMathias Nyman3-22/+19
Remove old iomem port array and index as parameters, just send a ponter to a port strucure instread Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: rename faked_port_index to hcd_portnumMathias Nyman1-22/+19
hcd_portnum is a better desctiption than faked_port_index, and is in line with the name the port structure uses. No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: xhci-ring: use port structures for port event handlerMathias Nyman1-71/+8
use port structures in the port event handler. Getting the right hcd and hcd portnumber from the hardware port number is a lot easier with port structures, and allows us to remove a lot of the previous code, including the find_faked_portnum_from_hw_index() function Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: xhci-hub: use new port structures for cas and wake mask functions.Mathias Nyman1-11/+10
Use port structures instead of mmio port arrays for xhci_port_missing_cas_quirk() and xhci_set_remote_wake_mask() in xhci-hub.c Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: xhci-hub: use new port structures to get port address instead of port ↵Mathias Nyman1-62/+78
array Use the new port structures for functions in xhci-hub.c to get port mmio address of portsc register instead of the port array xhci_get_port_io_addr() is no longer needeed and is removed. Plan is to get rid of the mmio port array completely. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: Add helper to get xhci roothub from hcdMathias Nyman2-0/+11
quick way to get the xhci roothub and thus all the ports belonging to a certain hcd Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: set hcd pointers for xhci usb2 and usb3 roothub structuresMathias Nyman1-0/+2
Allows us to know the correct hcd a xhci roothub and its ports belong to. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: Create new structures to store xhci port informationMathias Nyman2-6/+73
Current way of having one array telling only the port speed, and then two separate arrays with mmio addresses for usb2 and usb3 ports requeres helper functions to transate hw to hcd, and hcd to hw port numbers, and is hard to expand. Instead create a structure describing a port, including the mmio address, the port hardware index, hcd port index, and a pointer to the roothub it belongs to. Create one array containing all port structures in the same order the hardware controller sees them. Then add an array of port pointers to each xhci hub structure pointing to the ports that belonging to the roothub. This way we can easily convert hw indexed port events to usb core hcd port numbers, and vice versa usb core hub hcd port numbers to hw index and mmio address. Other benefit is that we can easily find the parent hcd and xhci structure of a port structure. This is useful in debugfs where we can give one port structure pointer as parameter and get both the correct mmio address and xhci lock needed to set some port parameter. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: hisilicon: support HiSilicon STB xHCI host controllerJianguo Sun3-0/+418
This commit adds support for HiSilicon STB xHCI host controller. There are two xHCI host controllers on HiSilicon STB SoCs. Each one requires additional configuration before exposing interface compliant with xHCI. Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: xhci: dbc: Add SPDX identifiers to dbc filesLu Baolu3-1/+3
Update the xhci dbc files with the correct SPDX license identifiers. Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexB.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24Merge tag 'usb-for-v4.18' of ↵Greg Kroah-Hartman53-758/+5400
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: changes for v4.18 merge window A total of 98 non-merge commits, the biggest part being in dwc3 this time around with a large refactoring of dwc3's transfer handling code. We also have a new driver for Aspeed virtual hub controller. Apart from that, just a list of miscellaneous fixes all over the place.
2018-05-22usb: musb: gadget: fix to_musb_ep() to not return NULLBin Liu1-4/+1
UDC core ensures the usb_ep parameter passed in is not NULL, so checking if (ep != NULL) is pointless. Convert to_musb_ep() to a simple macro to not directly return NULL to avoid warnings from code static analysis tools. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: gadget: fix to_musb_request() to not return NULLBin Liu1-4/+1
The gadget function drivers should ensure the usb_request parameter passed in is not NULL. UDC core doesn't check if it is NULL, so MUSB driver shouldn't have to check it either. Convert to_musb_request() to a simple macro to not directly return NULL to avoid warnings from code static analysis tools. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22USB: musb: dsps: propagate device-tree nodeJohan Hovold1-0/+1
To be able to use DSPS-based controllers with device-tree descriptions of the USB topology, we need to associate the glue device's device-tree node with the child controller device. Note that this can also be used to eventually let USB core manage generic phys. Also note that the other glue drivers will require similar changes to be able to describe their buses in DT. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: disable otg protocol supportBin Liu2-5/+3
As decided in the discussion [1] we are deleting the otg protocol support from the musb drivers. First this patch disables the flags for enabling the otg protocols. We will later gradually delete the otg protocol code from the musb drivers. [1] https://www.spinics.net/lists/linux-usb/msg167003.html Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove references to default_a of struct usb_otgBin Liu10-51/+25
musb drivers do not use the otg fsm framework, so referencing to otg->default_a doesn't have any effect, so remove the references. But tusb6010 glue driver uses it locally to control the vbus power, so keep the references in tusb6010 only. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: break the huge isr musb_stage0_irq() into small functionsBin Liu1-346/+384
musb_stage0_irq() is 400+ lines long. Break its interrupt events handling into each individual functions to make it easy to read. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove unused members in struct musb_hdrc_configBin Liu1-4/+0
The following members in struct musb_hdrc_config are not used, so remove them. soft_con utm_16 big_endian mult_bulk_tx mult_bulk_rx high_iso_tx high_iso_rx dma dma_channels dyn_fifo_size vendor_ctrl vendor_stat vendor_req dma_req_chan musb_hdrc_eps_bits Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove duplicated port mode enumBin Liu7-22/+16
include/linux/usb/musb.h already defines enum for musb port mode, so remove the duplicate in musb_core.h and use the definition in musb.h. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: dsps: remove duplicated get_musb_port_mode()Bin Liu1-20/+1
musb_core already has musb_get_mode(), so remove the duplicate from musb_dsps.c. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove duplicated quirks flagBin Liu4-15/+11
Both musb_io and musb_platform_ops in struct musb define a quirks flag for the same purpose. Let's remove the one in struct musb_io, and use that in struct musb_platform_ops instead. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove some register access wrapper functionsBin Liu2-76/+21
The following wrappers were defined because of Blackfin support. Now Blackfin support is removed, these wrappers are no longer needed, so remove them. musb_write_txfifosz musb_write_txfifoadd musb_write_rxfifosz musb_write_rxfifoadd musb_write_ulpi_buscontrol musb_read_txfifosz musb_read_txfifoadd musb_read_rxfifosz musb_read_rxfifoadd musb_read_ulpi_buscontrol musb_read_hwvers Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove adjust_channel_params() callback from musb_platform_opsBin Liu2-12/+0
Now Blackfin support is removed, nobody uses adjust_channel_params() any more, so remove it from struct musb_platform_ops. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove readl/writel from struct musb_platform_opsBin Liu3-28/+14
Now Blackfin support is removed, we no longer need function pointers for musb_readl() and musb_writel(). Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: merge musbhsdma.h into musbhsdma.cBin Liu2-73/+65
Now Blackfin support is removed, header musbhsdma.h is only included in musbhsdma.c. So let's merge the content in musbhsdma.h to musbhsdma.c and delete musbhsdma.h. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22USB: serial: pl2303: add support for tx xon/xoff flow controlFlorian Zumbiehl1-1/+15
Support hardware-level Xon/Xoff flow control in transmit direction with pl2303. I only know how to get the hardware to do IXON/!IXANY with ^S/^Q as control characters, so I preserve the old behaviour for all other cases. Signed-off-by: Florian Zumbiehl <florz@florz.de> [ johan: rewrite logic using pl2303_termios_change() helper ] Signed-off-by: Johan Hovold <johan@kernel.org>
2018-05-21USB: serial: ftdi_sio: clean up flow control managementJohan Hovold1-58/+23
Clean up the somewhat convoluted hardware-assisted flow control handling. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-05-21USB: serial: ftdi_sio: drop unnecessary urb_ variable prefixesJohan Hovold1-42/+41
Drop urb_ prefixes from value and index variables used in control requests. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-05-21USB: serial: ftdi_sio: use non-underscore fixed typesJohan Hovold1-25/+25
Replace all __u types with their u counterparts throughout the driver (whose structures are not exported to user space). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-05-21USB: serial: ftdi_sio: fix IXON/IXOFF mixupJohan Hovold1-6/+2
Since forever this driver has had IXON and IXOFF mixed up, and has used the latter rather than the former to enable hardware-assisted software flow control on output. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-05-21usb: dwc2: gadget: Fix coverity issueGrigor Tovmasyan1-1/+1
When _param is unsigned and the minimum value of range is 0, it gives the following warning: COVERITY NO_EFFECT: This less-than-zero comparison of an unsigned value is never true. Converting ._param to int to avoid this warning. Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: udc: renesas_usb3: fix double phy_put()Yoshihiro Shimoda1-2/+0
This patch fixes an issue that this driver cause double phy_put() calling. This driver must not call phy_put() in the remove because the driver calls devm_phy_get() in the probe. Fixes: 279d4bc64060 ("usb: gadget: udc: renesas_usb3: add support for generic phy") Cc: <stable@vger.kernel.org> # v4.15+ Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnectingYoshihiro Shimoda1-0/+7
This patch fixes an issue that reconnection is possible to fail because unexpected state handling happens by the irqs. To fix the issue, the driver disables the controller's irqs when disconnected. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable@vger.kernel.org> # v4.5+ Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: udc: renesas_usb3: should fail if devm_phy_get() returns errorYoshihiro Shimoda1-3/+5
This patch fixes an issue that this driver ignores errors other than the non-existence of the device, f.e. a memory allocation failure in devm_phy_get(). So, this patch replaces devm_phy_get() with devm_phy_optional_get(). Reported-by: Simon Horman <horms+renesas@verge.net.au> Fixes: 279d4bc64060 ("usb: gadget: udc: renesas_usb3: add support for generic phy") Cc: <stable@vger.kernel.org> # v4.15+ Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: udc: renesas_usb3: should call devm_phy_get() before add udcYoshihiro Shimoda1-8/+8
This patch fixes an issue that this driver cannot call phy_init() if a gadget driver is alreadly loaded because usb_add_gadget_udc() might call renesas_usb3_start() via .udc_start. This patch also revises the typo (s/an optional/optional/). Fixes: 279d4bc64060 ("usb: gadget: udc: renesas_usb3: add support for generic phy") Cc: <stable@vger.kernel.org> # v4.15+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: udc: renesas_usb3: should call pm_runtime_enable() before add udcYoshihiro Shimoda1-1/+1
This patch fixes an issue that this driver causes panic if a gadget driver is already loaded because usb_add_gadget_udc() might call renesas_usb3_start() via .udc_start, and then pm_runtime_get_sync() in renesas_usb3_start() doesn't work correctly. Note that the usb3_to_dev() macro should not be called at this timing because the macro uses the gadget structure. Fixes: cf06df3fae28 ("usb: gadget: udc: renesas_usb3: move pm_runtime_{en,dis}able()") Cc: <stable@vger.kernel.org> # v4.15+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: udc: renesas_usb3: should remove debugfsYoshihiro Shimoda1-1/+7
This patch fixes an issue that this driver doesn't remove its debugfs. Fixes: 43ba968b00ea ("usb: gadget: udc: renesas_usb3: add debugfs to set the b-device mode") Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeueMayank Rana1-1/+1
dwc3_ep_dequeue() waits for completion of End Transfer command using wait_event_lock_irq(), which will release the dwc3->lock while waiting and reacquire after completion. This allows a potential race condition with ep_disable() which also removes all requests from started_list and pending_list. The check for NULL r->trb should catch this but currently it exits to the wrong 'out1' label which calls dwc3_gadget_giveback(). Since its list entry was already removed, if CONFIG_DEBUG_LIST is enabled a 'list_del corruption' bug is thrown since its next/prev pointers are already LIST_POISON1/2. If r->trb is NULL it should simply exit to 'out0'. Fixes: cf3113d893d4 ("usb: dwc3: gadget: properly increment dequeue pointer on ep_dequeue") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: dwc3_gadget_del_and_unmap_request() can be staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/usb/dwc3/gadget.c:169:6: warning: symbol 'dwc3_gadget_del_and_unmap_request' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc2: pci: Fix error return code in dwc2_pci_probe()Wei Yongjun1-1/+3
Fix to return error code -ENOMEM from the alloc fail error handling case instead of 0, as done elsewhere in this function. Fixes: ecd29dabb2ba ("usb: dwc2: pci: Handle error cleanup in probe") Reviewed-by: Grigor Tovmasyan <tovmasya@synopsys.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc2: WA for Full speed ISOC IN in DDMA mode.Artur Petrosyan2-0/+23
By clearing NAK status of EP, core will send ZLP to IN token and assert NAK interrupt relying on TxFIFO status only. The WA applies only to core versions from 2.72a to 4.00a (including both). Also for FS_IOT_1.00a and HS_IOT_1.00a. Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc2: dwc2_vbus_supply_init: fix error checkTomeu Vizoso1-5/+8
devm_regulator_get_optional returns -ENODEV if the regulator isn't there, so if that's the case we have to make sure not to leave -ENODEV in the regulator pointer. Also, make sure we return 0 in that case, but correctly propagate any other errors. Also propagate the error from _dwc2_hcd_start. Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply") Cc: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Grigor Tovmasyan <tovmasya@synopsys.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: gadget: f_phonet: fix pn_net_xmit()'s return typeLuc Van Oostenryck1-1/+1
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc2: Fix HiKey regression caused by power_down featureJohn Stultz1-0/+1
In 4.17-rc, commit 03ea6d6e9e1f ("usb: dwc2: Enable power down") caused the HiKey board to not correctly handle switching between usb-gadget and usb-host mode. Unplugging the OTG port would result in: [ 42.240973] dwc2 f72c0000.usb: dwc2_restore_host_registers: no host registers to restore [ 42.249066] dwc2 f72c0000.usb: dwc2_host_exit_hibernation: failed to restore host registers And the USB-host ports would not function. And plugging in the OTG port, we would see: [ 46.046557] WARNING: CPU: 3 PID: 6 at drivers/usb/dwc2/gadget.c:260 dwc2_hsotg_init_fifo+0x194/0x1a0 [ 46.055761] CPU: 3 PID: 6 Comm: kworker/u16:0 Not tainted 4.17.0-rc5-00030-ge67da8c #231 [ 46.055767] Hardware name: HiKey Development Board (DT) [ 46.055784] Workqueue: dwc2 dwc2_conn_id_status_change ... Thus, this patch sets the hisi params to disable the power_down flag by default, and gets thing working again. Cc: John Youn <johnyoun@synopsys.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Artur Petrosyan <arturp@synopsys.com> Cc: Grigor Tovmasyan <tovmasya@synopsys.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: linux-usb@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc2: Fix kernel doc's warnings.Grigor Tovmasyan12-61/+215
Added descriptions for all not described parameters. Fix all kernel doc's warnings. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-19 16:41:35 +0300