summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2018-05-24usb: xhci: tegra: Add runtime PM supportJon Hunter1-26/+62
Add runtime PM support to the Tegra XHCI driver and move the function calls to enable/disable the clocks, regulators and PHY into the runtime PM callbacks. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: xhci: tegra: Prepare for adding runtime PM supportJon Hunter1-17/+17
When adding runtime PM support to the Tegra XHCI driver, it is desirable to move the function calls to enable the clocks, regulators and PHY from the tegra_xusb_probe into the runtime PM handlers. Currently, the clocks, regulators and PHY are all enabled before we call usb_create_hcd() in tegra_xusb_probe(), however, we cannot call pm_runtime_get_sync() at this point because the platform device data is not yet initialised. Fortunately, the function usb_create_hcd() can be called before we enable the clocks, regulators and PHY and so prepare for adding runtime PM support, by moving the call to usb_create_hcd() before we enable the hardware. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb-storage: Add compatibility quirk flags for G-Technologies G-DriveAlexander Kappner2-0/+18
The "G-Drive" (sold by G-Technology) external USB 3.0 drive hangs on write access under UAS and usb-storage: [ 136.079121] sd 15:0:0:0: [sdi] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 136.079144] sd 15:0:0:0: [sdi] tag#0 Sense Key : Illegal Request [current] [ 136.079152] sd 15:0:0:0: [sdi] tag#0 Add. Sense: Invalid field in cdb [ 136.079176] sd 15:0:0:0: [sdi] tag#0 CDB: Write(16) 8a 08 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [ 136.079180] print_req_error: critical target error, dev sdi, sector 0 [ 136.079183] Buffer I/O error on dev sdi, logical block 0, lost sync page write [ 136.173148] EXT4-fs (sdi): mounted filesystem with ordered data mode. Opts: (null) [ 140.583998] sd 15:0:0:0: [sdi] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 140.584010] sd 15:0:0:0: [sdi] tag#0 Sense Key : Illegal Request [current] [ 140.584016] sd 15:0:0:0: [sdi] tag#0 Add. Sense: Invalid field in cdb [ 140.584022] sd 15:0:0:0: [sdi] tag#0 CDB: Write(16) 8a 08 00 00 00 00 e8 c4 00 18 00 00 00 08 00 00 [ 140.584025] print_req_error: critical target error, dev sdi, sector 3905159192 [ 140.584044] print_req_error: critical target error, dev sdi, sector 3905159192 [ 140.584052] Aborting journal on device sdi-8. The proposed patch adds compatibility quirks. Because the drive requires two quirks (one to work with UAS, and another to work with usb-storage), adding this under unusual_devs.h and not just unusual_uas.h so kernels compiled without UAS receive the quirk. With the patch, the drive works reliably on UAS and usb- storage. (tested on NEC Corporation uPD720200 USB 3.0 host controller). Signed-off-by: Alexander Kappner <agk@godking.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb-storage: Add support for FL_ALWAYS_SYNC flag in the UAS driverAlexander Kappner1-0/+6
The ALWAYS_SYNC flag is currently honored by the usb-storage driver but not UAS and is required to work around devices that become unstable upon being queried for cache. This code is taken straight from: drivers/usb/storage/scsiglue.c:284 Signed-off-by: Alexander Kappner <agk@godking.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: typec: wcove: Remove dependency on HW FSMHeikki Krogerus1-2/+28
The USB Type-C PHY in Intel WhiskeyCove PMIC has build-in USB Type-C state machine which we were relying on to configure the CC lines correctly. This patch removes that dependency and configures the CC line according to commands from the port manager (tcpm.c) in wcove_set_cc(). This fixes an issue where USB devices attached to the USB Type-C port do not get enumerated. When acting as source/host, the HW FSM sometimes fails to configure the PHY correctly. Fixes: 3c4fb9f16921 ("usb: typec: wcove: start using tcpm for USB PD support") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: roles: intel_xhci: Enable runtime PMHeikki Krogerus1-1/+13
This fixes an issue where the mux does not get configured when the parent device is suspended. The registers for this mux are mapped to the parent device MMIO (usually xHCI PCI device), so in order for the driver to be able to program the registers, the parent device must be resumed. Reported-by: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> Fixes: f6fb9ec02be1 ("usb: roles: Add Intel xHCI USB role switch driver") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: typec: fusb302: Fix debugfs issueHeikki Krogerus1-0/+1
Removing the "fusb302" debugfs directory when unloading the driver. That allows the driver to be loaded more then one time. The directory will not get actually removed until it is empty, so only after the last instance has been removed. This fixes an issue where the driver can't be re-loaded if it has been unloaded as the "fusb302" debugfs directory already exists. Fixes: 76f0c53d08b9 ("usb: typec: fusb302: Move out of staging") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: roles: intel_xhci: Always allow user controlHeikki Krogerus1-21/+2
Trying to determine the USB port type with this mux is very difficult. To simplify the situation, always allow user control, even if the port is USB Type-C port. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: typec: Fix htmldocs warningHeikki Krogerus1-1/+1
Fix htmldocs warning: drivers/usb/typec/mux.c:186: warning: Function parameter or member 'mux' not described in 'typec_mux_unregister' Reported-by: kbuild test robot <lkp@intel.com> Fixes: bdecb33af34f ("usb: typec: API for controlling USB Type-C Multiplexers") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usbip: vhci_sysfs: fix potential Spectre v1Gustavo A. R. Silva1-8/+16
pdev_nr and rhport can be controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/usb/usbip/vhci_sysfs.c:238 detach_store() warn: potential spectre issue 'vhcis' drivers/usb/usbip/vhci_sysfs.c:328 attach_store() warn: potential spectre issue 'vhcis' drivers/usb/usbip/vhci_sysfs.c:338 attach_store() warn: potential spectre issue 'vhci->vhci_hcd_ss->vdev' drivers/usb/usbip/vhci_sysfs.c:340 attach_store() warn: potential spectre issue 'vhci->vhci_hcd_hs->vdev' Fix this by sanitizing pdev_nr and rhport before using them to index vhcis and vhci->vhci_hcd_ss->vdev respectively. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: gadget: function: printer: avoid wrong list handling in printer_write()Yoshihiro Shimoda1-3/+3
When printer_write() calls usb_ep_queue(), a udc driver (e.g. renesas_usbhs driver) may call usb_gadget_giveback_request() in the udc .queue ops immediately. Then, printer_write() calls list_add(&req->list, &dev->tx_reqs_active) wrongly. After that, if we do unbind the printer driver, WARN_ON() happens in printer_func_unbind() because the list entry is not removed. So, this patch moves list_add(&req->list, &dev->tx_reqs_active) calling before usb_ep_queue(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24typec: tcpm: Provide fwnode pointer as part of psy_cfgAdam Thomson1-0/+2
For supply registration, provide fwnode pointer of the port device, via the power_supply_config structure, to allow other psy drivers to add us as a supplier. At present this only applies to DT based platforms using the 'power-supplies' DT property, but in the future should also work for ACPI platforms when the relevant support is added to the power_supply core. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: fix warning of sleep in atomic context in notifier callbackChunfeng Yun2-9/+46
The notifier callbacks of extcon are called in atomic context, but the callbacks will call regulator_enable()/regulator_disable() which may sleep caused by mutex, so use work queue to call the sleep functions. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: reset gadget when VBUS_FALL interrupt arisesChunfeng Yun1-1/+3
When VBUS_FALL interrupt arises, it means U3 device is disconnected with host, so need reset status of gadget Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: avoid sleep in atomic context when enter test modeChunfeng Yun1-1/+1
Use readl_poll_timeout_atomic() instead of readl_poll_timeout() in atomic context Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: clear test_mode flag when resetChunfeng Yun1-0/+1
Clear test_mode flag when the gadget is reset by host, otherwise will affect the next test item. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: fix uncontinuous SeqN issue after disable EPChunfeng Yun1-2/+12
Reset EP when disable it to reset data toggle for U2 EP, and SeqN, flow control status etc for U3 EP, this can avoid issue of uncontinuous SeqN Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: re-enable controller to accept LPM request after LPM resumeChunfeng Yun1-1/+7
After the controller receives a LPM request, it will reject the LPM request, and need software to re-enable it after LPM resume if the controller doesn't remote wakeup from L1 automatically Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: debugfs: add debugfs interface to enable compliance mode for a portMathias Nyman1-1/+38
Enable compliance transition for a port by writing "compliance" to the ports portsc file in debugfs. port must be "Not-connected" and Link must be in RxDetect state to enable compliance mode. Only needed for host that have CTC flag set. Allows state transitioning to compliance at 1st LFPS timeout. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: debugfs: add usb ports to xhci debugfsMathias Nyman1-0/+48
Add ports/portxx/portsc for each xHC hardware usb port to debugfs. Showing the content of the port status and control register for each port (PORTSC) Portxx is numbered starting from 1 for historical reasons to better match port numbering shown by lsusb and other places. Ports in debugfs are in the order XHC controller has them, In most cases USB2 ports come first, followed by USB3 ports. i.e. USB2 ports are port01-portxx, and USB3 portxx-portmax. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: xhci-mem: remove port_arrays and the code initializing themMathias Nyman2-97/+11
As we are now using the new port strtuctes the port_arrays are no longer needed, remove them completely Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci-mtk: use xhci hub structures to get number of ports in roothubsMathias Nyman1-2/+2
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: xhci-hub: use port structure members instead of xhci_get_ports()Mathias Nyman1-24/+4
xhci_get_ports() is one of the last functions using port_arrays in xhci-hub.c. We get the same data directly from hub and port structures instead, so convert and remove both xhci_get_ports() and port_arrays from all function that no longer need it. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: use port structures instead of port arrays in xhci.c functionsMathias Nyman1-28/+22
get rid of port iomem arrays and use port structures in the following functions: xhci_find_raw_port_number() xhci_disable_port_wake_on_bits() xhci_set_usb2_hardware_lpm() xhci_all_ports_seen_u0() compliance_mode_recovery() Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: change xhci_test_and_clear_bit() to use new port structureMathias Nyman3-26/+15
Don't use pointers to port array and port index as function parameters in xhci_test_and_clear_bit(), just use a pointer to the right port structure. xhci_test_and_clear_bit() was the last port_array user in xhci_get_port_status() and handle_port_status(), so remove the port_array from them as well. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: change xhci_set_link_state() to work with port structuresMathias Nyman3-22/+19
Remove old iomem port array and index as parameters, just send a ponter to a port strucure instread Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: rename faked_port_index to hcd_portnumMathias Nyman1-22/+19
hcd_portnum is a better desctiption than faked_port_index, and is in line with the name the port structure uses. No functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: xhci-ring: use port structures for port event handlerMathias Nyman1-71/+8
use port structures in the port event handler. Getting the right hcd and hcd portnumber from the hardware port number is a lot easier with port structures, and allows us to remove a lot of the previous code, including the find_faked_portnum_from_hw_index() function Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: xhci-hub: use new port structures for cas and wake mask functions.Mathias Nyman1-11/+10
Use port structures instead of mmio port arrays for xhci_port_missing_cas_quirk() and xhci_set_remote_wake_mask() in xhci-hub.c Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: xhci-hub: use new port structures to get port address instead of port ↵Mathias Nyman1-62/+78
array Use the new port structures for functions in xhci-hub.c to get port mmio address of portsc register instead of the port array xhci_get_port_io_addr() is no longer needeed and is removed. Plan is to get rid of the mmio port array completely. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: Add helper to get xhci roothub from hcdMathias Nyman2-0/+11
quick way to get the xhci roothub and thus all the ports belonging to a certain hcd Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: set hcd pointers for xhci usb2 and usb3 roothub structuresMathias Nyman1-0/+2
Allows us to know the correct hcd a xhci roothub and its ports belong to. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: Create new structures to store xhci port informationMathias Nyman2-6/+73
Current way of having one array telling only the port speed, and then two separate arrays with mmio addresses for usb2 and usb3 ports requeres helper functions to transate hw to hcd, and hcd to hw port numbers, and is hard to expand. Instead create a structure describing a port, including the mmio address, the port hardware index, hcd port index, and a pointer to the roothub it belongs to. Create one array containing all port structures in the same order the hardware controller sees them. Then add an array of port pointers to each xhci hub structure pointing to the ports that belonging to the roothub. This way we can easily convert hw indexed port events to usb core hcd port numbers, and vice versa usb core hub hcd port numbers to hw index and mmio address. Other benefit is that we can easily find the parent hcd and xhci structure of a port structure. This is useful in debugfs where we can give one port structure pointer as parameter and get both the correct mmio address and xhci lock needed to set some port parameter. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24xhci: hisilicon: support HiSilicon STB xHCI host controllerJianguo Sun3-0/+418
This commit adds support for HiSilicon STB xHCI host controller. There are two xHCI host controllers on HiSilicon STB SoCs. Each one requires additional configuration before exposing interface compliant with xHCI. Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: xhci: dbc: Add SPDX identifiers to dbc filesLu Baolu3-1/+3
Update the xhci dbc files with the correct SPDX license identifiers. Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexB.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24Merge tag 'usb-for-v4.18' of ↵Greg Kroah-Hartman53-758/+5400
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: changes for v4.18 merge window A total of 98 non-merge commits, the biggest part being in dwc3 this time around with a large refactoring of dwc3's transfer handling code. We also have a new driver for Aspeed virtual hub controller. Apart from that, just a list of miscellaneous fixes all over the place.
2018-05-22usb: musb: gadget: fix to_musb_ep() to not return NULLBin Liu1-4/+1
UDC core ensures the usb_ep parameter passed in is not NULL, so checking if (ep != NULL) is pointless. Convert to_musb_ep() to a simple macro to not directly return NULL to avoid warnings from code static analysis tools. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: gadget: fix to_musb_request() to not return NULLBin Liu1-4/+1
The gadget function drivers should ensure the usb_request parameter passed in is not NULL. UDC core doesn't check if it is NULL, so MUSB driver shouldn't have to check it either. Convert to_musb_request() to a simple macro to not directly return NULL to avoid warnings from code static analysis tools. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22USB: musb: dsps: propagate device-tree nodeJohan Hovold1-0/+1
To be able to use DSPS-based controllers with device-tree descriptions of the USB topology, we need to associate the glue device's device-tree node with the child controller device. Note that this can also be used to eventually let USB core manage generic phys. Also note that the other glue drivers will require similar changes to be able to describe their buses in DT. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: disable otg protocol supportBin Liu2-5/+3
As decided in the discussion [1] we are deleting the otg protocol support from the musb drivers. First this patch disables the flags for enabling the otg protocols. We will later gradually delete the otg protocol code from the musb drivers. [1] https://www.spinics.net/lists/linux-usb/msg167003.html Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove references to default_a of struct usb_otgBin Liu10-51/+25
musb drivers do not use the otg fsm framework, so referencing to otg->default_a doesn't have any effect, so remove the references. But tusb6010 glue driver uses it locally to control the vbus power, so keep the references in tusb6010 only. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: break the huge isr musb_stage0_irq() into small functionsBin Liu1-346/+384
musb_stage0_irq() is 400+ lines long. Break its interrupt events handling into each individual functions to make it easy to read. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove unused members in struct musb_hdrc_configBin Liu1-4/+0
The following members in struct musb_hdrc_config are not used, so remove them. soft_con utm_16 big_endian mult_bulk_tx mult_bulk_rx high_iso_tx high_iso_rx dma dma_channels dyn_fifo_size vendor_ctrl vendor_stat vendor_req dma_req_chan musb_hdrc_eps_bits Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove duplicated port mode enumBin Liu7-22/+16
include/linux/usb/musb.h already defines enum for musb port mode, so remove the duplicate in musb_core.h and use the definition in musb.h. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: dsps: remove duplicated get_musb_port_mode()Bin Liu1-20/+1
musb_core already has musb_get_mode(), so remove the duplicate from musb_dsps.c. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove duplicated quirks flagBin Liu4-15/+11
Both musb_io and musb_platform_ops in struct musb define a quirks flag for the same purpose. Let's remove the one in struct musb_io, and use that in struct musb_platform_ops instead. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove some register access wrapper functionsBin Liu2-76/+21
The following wrappers were defined because of Blackfin support. Now Blackfin support is removed, these wrappers are no longer needed, so remove them. musb_write_txfifosz musb_write_txfifoadd musb_write_rxfifosz musb_write_rxfifoadd musb_write_ulpi_buscontrol musb_read_txfifosz musb_read_txfifoadd musb_read_rxfifosz musb_read_rxfifoadd musb_read_ulpi_buscontrol musb_read_hwvers Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove adjust_channel_params() callback from musb_platform_opsBin Liu2-12/+0
Now Blackfin support is removed, nobody uses adjust_channel_params() any more, so remove it from struct musb_platform_ops. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove readl/writel from struct musb_platform_opsBin Liu3-28/+14
Now Blackfin support is removed, we no longer need function pointers for musb_readl() and musb_writel(). Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: merge musbhsdma.h into musbhsdma.cBin Liu2-73/+65
Now Blackfin support is removed, header musbhsdma.h is only included in musbhsdma.c. So let's merge the content in musbhsdma.h to musbhsdma.c and delete musbhsdma.h. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 02:36:05 +0300