summaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci-mtk.c
AgeCommit message (Collapse)AuthorFilesLines
2021-04-22usb: xhci-mtk: remove bus status checkChunfeng Yun1-41/+2
PM will take care of the status of child device, so no need check each port anymore. Suggested-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618555706-6810-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: use clock bulk to get clocksChunfeng Yun1-90/+19
Use clock bulk helpers to get/enable/disable clocks, meanwhile make sys_ck optional, then will be easier to handle clocks. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: add support runtime PMChunfeng Yun1-16/+124
A dedicated wakeup irq will be used to handle runtime suspend/resume, we use dev_pm_set_dedicated_wake_irq API to take care of requesting and attaching wakeup irq, then the suspend/resume framework will help to enable/disable wakeup irq. The runtime PM is default off since some platforms may not support it. users can enable it via power/control (set "auto") in sysfs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: check return value in suspend/resume hooksChunfeng Yun1-10/+27
Return error number if encounter errors during suspend and resume. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-02usb: xhci-mtk: support quirk to disable usb2 lpmChunfeng Yun1-0/+3
The xHCI driver support usb2 HW LPM by default, here add support XHCI_HW_LPM_DISABLE quirk, then we can disable usb2 lpm when need it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1617181553-3503-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-02usb: xhci-mtk: fix broken streams issue on 0.96 xHCIChunfeng Yun1-1/+9
The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1617181553-3503-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-28usb: xhci-mtk: remove MODULE_ALIASChunfeng Yun1-1/+0
Since the driver only supports the devices created by the OF core, seems no need MODULE_ALIAS() anymore. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-9-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-28usb: xhci-mtk: drop CONFIG_OFChunfeng Yun1-3/+1
The driver can match only the devices created by the OF core via the DT table, so the table should be always used. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-8-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26usb: xhci-mtk: add support ip-sleep wakeup for mT8192Chunfeng Yun1-0/+10
Add support ip-sleep wakeup for mT8192, it's a specific revision, and not following IPM rule. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-7-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26usb: xhci-mtk: support ip-sleep wakeup for MT8183Chunfeng Yun1-0/+13
Add support ip-sleep wakeup for MT8183, it's similar to MT8173, and it's also a specific one, but not following IPM rule. Due to the index 2 already used by many DTS, it's better to keep it unchanged for backward compatibility, treat specific ones without following IPM rule as revision 1.x, meanwhile reserve 3~10 for later revision that follows the IPM rule. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: support to build xhci-mtk-hcd.koChunfeng Yun1-0/+2
Currently xhci-hcd.ko building depends on USB_XHCI_MTK, this is not flexible for some cases. For example: USB_XHCI_HCD is y, and USB_XHCI_MTK is m, then we can't implement extended functions if only update xhci-mtk.ko This patch is used to remove the dependence. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/0b62e21ddfacc1c2874726dd27ccab80c993f303.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usb: xhci-mtk: remove declaration of xhci_mtk_setup()Chunfeng Yun1-9/+8
Move xhci_driver_overrides struct variable after definition of xhci_mtk_setup(), then we can remove it's declaration. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/cf627d611a5c59508371cc3360cb402b70825fd8.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26usb: xhci-mtk: fix unreleased bandwidth dataIkjoon Jang1-0/+2
xhci-mtk needs XHCI_MTK_HOST quirk functions in add_endpoint() and drop_endpoint() to handle its own sw bandwidth management. It stores bandwidth data into an internal table every time add_endpoint() is called, and drops those in drop_endpoint(). But when bandwidth allocation fails at one endpoint, all earlier allocation from the same interface could still remain at the table. This patch moves bandwidth management codes to check_bandwidth() and reset_bandwidth() path. To do so, this patch also adds those functions to xhci_driver_overrides and lets mtk-xhci to release all failed endpoints in reset_bandwidth() path. Fixes: 08e469de87a2 ("usb: xhci-mtk: supports bandwidth scheduling with multi-TT") Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Link: https://lore.kernel.org/r/20210113180444.v6.1.Id0d31b5f3ddf5e734d2ab11161ac5821921b1e1e@changeid Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18usb: xhci-mtk: Fix typoFrank Wunderlich1-3/+3
fix this small typo u3_ports_disabed => u3_ports_disabled Fixes: 55ba6e9e25a6 (usb: xhci-mtk: support option to disable usb3 ports) Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20200808124906.89976-1-linux@fw-web.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24usb: host: xhci-mtk: avoid runtime suspend when removing hcdMacpaul Lin1-2/+3
When runtime suspend was enabled, runtime suspend might happen when xhci is removing hcd. This might cause kernel panic when hcd has been freed but runtime pm suspend related handle need to reference it. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200624135949.22611-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: mtk-xhci: Do not explicitly set the DMA maskTomasz Figa1-5/+0
The mtk-xhci platform glue sets the DMA mask to 32 bits on its own, which was needed before commit fda182d80a0b ("usb: xhci: configure 32-bit DMA if the controller does not support 64-bit DMA"), but now it has no effect, because xhci_gen_setup() sets it up for us according to hardware capabilities. Remove the useless code. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20191219093954.163417-1-tfiga@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-28usb: xhci-mtk: add an optional xhci_ck clockChunfeng Yun1-0/+13
Some SoCs may have an optional clock xhci_ck (125M or 200M), it usually uses the same PLL as sys_ck, so support it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1566542425-20082-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19usb: xhci-mtk: get optional clock by devm_clk_get_optional()Chunfeng Yun1-16/+3
Use devm_clk_get_optional() to get optional clock instead of optional_clk_get() which uses devm_clk_get() to get clock and checks for -EPROBE_DEFER but not -ENOENT as devm_clk_get_optional() does, in fact, only ignoring -ENOENT will cover more errors, so the replacement doesn't change original purpose. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09xhci: Fix leaking USB3 shared_hcd at xhci removalMathias Nyman1-2/+4
Ensure that the shared_hcd pointer is valid when calling usb_put_hcd() The shared_hcd is removed and freed in xhci by first calling usb_remove_hcd(xhci->shared_hcd), and later usb_put_hcd(xhci->shared_hcd) Afer commit fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") the shared_hcd was never properly put as xhci->shared_hcd was set to NULL before usb_put_hcd(xhci->shared_hcd) was called. shared_hcd (USB3) is removed before primary hcd (USB2). While removing the primary hcd we might need to handle xhci interrupts to cleanly remove last USB2 devices, therefore we need to set xhci->shared_hcd to NULL before removing the primary hcd to let xhci interrupt handler know shared_hcd is no longer available. xhci-plat.c, xhci-histb.c and xhci-mtk first create both their hcd's before adding them. so to keep the correct reverse removal order use a temporary shared_hcd variable for them. For more details see commit 4ac53087d6d4 ("usb: xhci: plat: Create both HCDs before adding them") Fixes: fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") Cc: Joel Stanley <joel@jms.id.au> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: <stable@vger.kernel.org> Reported-by: Jack Pham <jackp@codeaurora.org> Tested-by: Jack Pham <jackp@codeaurora.org> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02usb: xhci-mtk: resume USB3 roothub firstChunfeng Yun1-2/+2
Give USB3 devices a better chance to enumerate at USB3 speeds if they are connected to a suspended host. Porting from "671ffdff5b13 xhci: resume USB 3 roothub first" Cc: <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-09usb: host: xhci-mtk: remove custom USB PHY handlingMartin Blumenstingl1-96/+2
The new PHY wrapper is now wired up in the core HCD code. This means that PHYs are now controlled (initialized, enabled, disabled, exited) without requiring any host-driver specific code. Remove the custom USB PHY handling from the xhci-mtk driver as the core HCD code now handles this. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-16usb: xhci-mtk: fix semicolon.cocci warningsFengguang Wu1-1/+1
drivers/usb/host/xhci-mtk.c:311:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: a2ecc4df9f84 ("usb: xhci-mtk: supports remote wakeup for mt2712 with two xHCI IPs") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09usb: xhci-mtk: supports remote wakeup for mt2712 with two xHCI IPsChunfeng Yun1-117/+60
The old way of usb wakeup only supports platform with single xHCI IP, such as mt8173, but mt2712 has two xHCI IPs, so rebuild its flow and supports the new glue layer of usb wakeup on mt2712 which is different from mt8173. Due to there is a hardware bug with the LINE STATE wakeup mode on mt8173 which causes wakeup failure by low speed devices, and also because IP SLEEP mode can cover all functions of LINE STATE mode, it is unused in fact, and will not support it later, so remove it at the same time. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08usb: xhci: allow imod-interval to be configurableAdam Wallis1-0/+9
The xHCI driver currently has the IMOD set to 160, which translates to an IMOD interval of 40,000ns (160 * 250)ns Commit 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller") introduced a QUIRK for the MTK platform to adjust this interval to 20, which translates to an IMOD interval of 5,000ns (20 * 250)ns. This is due to the fact that the MTK controller IMOD interval is 8 times as much as defined in xHCI spec. Instead of adding more quirk bits for additional platforms, this patch introduces the ability for vendors to set the IMOD_INTERVAL as is optimal for their platform. By using device_property_read_u32() on "imod-interval-ns", the IMOD INTERVAL can be specified in nano seconds. If no interval is specified, the default of 40,000ns (IMOD=160) will be used. No bounds checking has been implemented due to the fact that a vendor may have violated the spec and would need to specify a value outside of the max 8,000 IRQs/second limit specified in the xHCI spec. Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07USB: host: xhci: Remove redundant license textGreg Kroah-Hartman1-10/+0
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-25usb: xhci-mtk: fix ptr_ret.cocci warningskbuild test robot1-4/+1
drivers/usb/host/xhci-mtk.c:256:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Fixes: b6bb72cf0df1 ("usb: xhci-mtk: add optional mcu and dma bus clocks") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23usb: xhci-mtk: add optional mcu and dma bus clocksChunfeng Yun1-19/+60
There are mcu_bus and dma_bus clocks needed to be controlled by driver on some SoCs, so add them as optional ones Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23usb: xhci-mtk: remove dummy wakeup debounce clocksChunfeng Yun1-33/+0
The wakeup debounce clocks for each ports in fact are not needed, so remove them. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23usb: xhci-mtk: support option to disable usb3 portsChunfeng Yun1-3/+15
Add support to disable specific usb3 ports, it's useful when usb3 phy is shared with PCIe or SATA, because we should disable the corresponding usb3 port if the phy is used by PCIe or SATA. Sometimes it's helpful to analyse and solve problems. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23usb: xhci-mtk: check clock stability of U3_MACChunfeng Yun1-0/+4
This is useful to find out the root cause when the Super Speed doesn't work. Such as when the T-PHY is switched to PCIe or SATA, and affects Super Speed function, the check will fail. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23usb: xhci-mtk: use ports count from xhci in xhci_mtk_sch_init()Chunfeng Yun1-3/+0
Make use of ports count from xhci but not from ippc in xhci_mtk_sch_init() Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23usb: xhci-mtk: use dma_set_mask_and_coherent() in probe functionChunfeng Yun1-6/+1
This patch uses the simpler dma_set_mask_and_coherent() instead of doing these as separate steps Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31usb: xhci-mtk: add generic compatible stringChunfeng Yun1-0/+1
The xhci-mtk driver is a generic driver for MediaTek xHCI IP, add a generic compatible to avoid confusion when support new SoCs but use a compatible with specific SoC's name "mt8173". Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: xhci: remove dummy extra_priv_size for size of xhci_hcd structChunfeng Yun1-1/+0
because hcd_priv_size is already size of xhci_hcd struct, extra_priv_size is not needed anymore for MTK and tegra drivers. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: xhci-mtk: check hcc_params after adding primary hcdChunfeng Yun1-3/+3
hcc_params is set in xhci_gen_setup() called from usb_add_hcd(), so checks the Maximum Primary Stream Array Size in the hcc_params register after adding primary hcd. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-08usb: xhci-mtk: make the reference clock optionalChunfeng Yun1-2/+9
Make the reference clock optional for DTS backward compatibility and ignore the error if it does not exist. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19usb: xhci-mtk: add reference clockChunfeng Yun1-0/+15
usually, the reference clock comes from 26M oscillator directly, but some SoCs are not, add it for compatibility. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-03usb: return error code when platform_get_irq failsPan Bian1-1/+3
In function xhci_mtk_probe(), variable ret takes the return value. Its value should be negative on failures. However, when the call to function platform_get_irq() fails, it does not set the error code, and 0 will be returned. 0 indicates no error. As a result, the callers of function xhci_mtk_probe() will not be able to detect the error. This patch fixes the bug by assigning the return value of platform_get_irq() to variable ret if it fails. CC: <stable@vger.kernel.org> Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: xhci-mtk: make IPPC register optionalChunfeng Yun1-7/+31
Make IPPC register optional to support host side of dual-role mode, due to it is moved into common glue layer for simplification. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-04usb: xhci-mtk: use __maybe_unused to hide pm functionsArnd Bergmann1-7/+3
The mediatek XHCI glue driver uses SET_SYSTEM_SLEEP_PM_OPS() to conditionally set the correct suspend/resume options, and also puts both the dev_pm_ops and the functions inside of an #ifdef testing for CONFIG_PM_SLEEP, but those functions then call other code that becomes unused: drivers/usb/host/xhci-mtk.c:135:12: error: 'xhci_mtk_host_disable' defined but not used [-Werror=unused-function] drivers/usb/host/xhci-mtk.c:313:13: error: 'usb_wakeup_enable' defined but not used [-Werror=unused-function] drivers/usb/host/xhci-mtk.c:321:13: error: 'usb_wakeup_disable' defined but not used [-Werror=unused-function] This replaces the #ifdef with __maybe_unused annotations so the compiler knows it can silently drop them instead of warning. For the DEV_PM_OPS definition, we can use an IS_ENABLED() check to avoid defining the structure when CONFIG_PM is not set without the #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04usb: xhci-mtk: fix AHB bus hang up caused by roothubs pollingChunfeng Yun1-0/+23
when ip fails to enter sleep mode, register access protection will be disabled, at the same time if all clocks are disabled, access register will hang up AHB bus. the common case causes ip sleep failure is that after all ports enter U3 but before ip enters sleep mode, a port receives a resume signal('K'). this will happens when such as clicks mouse to try to do remote-wakeup to stop system enter suspend. so stop polling root hubs to avoid access xHCI register on bus suspend, and restart it when bus resumes. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01xhci: mediatek: support MTK xHCI host controllerChunfeng Yun1-0/+763
There some vendor quirks for MTK xhci host controller: 1. It defines some extra SW scheduling parameters for HW to minimize the scheduling effort for synchronous and interrupt endpoints. The parameters are put into reseved DWs of slot context and endpoint context. 2. Its IMODI unit for Interrupter Moderation register is 8 times as much as that defined in xHCI spec. 3. Its TDS in Normal TRB defines a number of packets that remains to be transferred for a TD after processing all Max packets in all previous TRBs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-10 10:15:51 +0300