summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/function
AgeCommit message (Collapse)AuthorFilesLines
2015-07-27usb: gadget: f_printer: actually limit the number of instancesAndrzej Pietrasiewicz1-1/+9
There is a predefined maximum number of printer instances, currently 4. A chrdev region is allocated accordingly, but with configfs the user can create as many printer function directories as they like. To make the number of printer instances consistent with the number of allocated minors, the limit is enforced at directory creation time. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-27usb: gadget: f_hid: actually limit the number of instancesAndrzej Pietrasiewicz1-0/+4
There is a predefined maximum number of hid instances, currently 4. A chrdev region is allocated accordingly, but with configfs the user can create as many hid function directories as they like. To make the number of hid instances consistent with the number of allocated minors, the limit is enforced at directory creation time. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-27usb: gadget: f_uac2: fix calculation of uac2->p_intervalPeter Chen1-2/+2
The p_interval should be less if the 'bInterval' at the descriptor is larger, eg, if 'bInterval' is 5 for HS, the p_interval should be 8000 / 16 = 500. It fixes the patch 9bb87f168931 ("usb: gadget: f_uac2: send reasonably sized packets") Cc: <stable@vger.kernel.org> # v3.18+ Fixes: 9bb87f168931 ("usb: gadget: f_uac2: send reasonably sized packets") Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: gadget: f_midi: fix error recovery pathAndrzej Pietrasiewicz1-3/+1
In case kstrdup() fails the resources to release are midi->in_port[] and midi. No cards have been registered, so no need to unregister any. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: gadget: f_fs: do not set cancel function on synchronous {read,write}Rui Miguel Silva1-2/+4
do not try to set cancel function in synchronous operations in ffs_epfile_{read,write}_iter. Cc: <stable@vger.kernel.org> # v4.0+ Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: f_mass_storage: limit number of reported LUNsMichal Nazarewicz1-3/+13
Mass storage function created via configfs always reports eight LUNs to the hosts even if only one LUN has been configured. Adjust the number when the USB function is allocated based on LUNs that user has created. Cc: <stable@vger.kernel.org> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-05Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ...
2015-06-24vfs: add file_path() helperMiklos Szeredi2-2/+2
Turn d_path(&file->f_path, ...); into file_path(file, ...); Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-06-08Merge 4.1-rc7 into usb-nextGreg Kroah-Hartman3-8/+20
This resolves a merge issue in musb_core.c and we want the fixes that were in Linus's tree in this branch as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-02Merge tag 'usb-for-v4.2' of ↵Greg Kroah-Hartman6-242/+216
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.2 merge window - dwc2 adds hibernation support - preparation for sunxi glue to musb driver - new ULPI bus - new ULPI PHY driver for TUSB1210 - musb patches to support multiple DMA engines on same binary - support for R-Car E2 on renesas_usbhs Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: f_fs: add extra check before unregister_gadget_itemRui Miguel Silva1-2/+8
ffs_closed can race with configfs_rmdir which will call config_item_release, so add an extra check to avoid calling the unregister_gadget_item with an null gadget item. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: f_fs: fix check in read operationRui Miguel Silva1-1/+1
when copying to iter the size can be different then the iov count, the check for full iov is wrong and make any read on request which is not the exactly size of iov to return -EFAULT. So, just check the success of the copy. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: f_uac1: check return code from config_ep_by_speedMichael Trimarchi1-1/+4
Not checking config_ep_by_speed could lead to a kernel NULL pointer dereference error in usb_ep_enable Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: ffs: fix: Always call ffs_closed() in ffs_data_clear()Krzysztof Opasiak1-5/+8
Originally FFS_FL_CALL_CLOSED_CALLBACK flag has been used to indicate if we should call ffs_closed_callback(). Commit 4b187fceec3c ("usb: gadget: FunctionFS: add devices management code") changed its semantic to indicate if we should call ffs_closed() function which does a little bit more. This situation leads to: [ 122.362269] ------------[ cut here ]------------ [ 122.362287] WARNING: CPU: 2 PID: 2384 at drivers/usb/gadget/function/f_fs.c:3417 ffs_ep0_write+0x730/0x810 [usb_f_fs]() [ 122.362292] Modules linked in: [ 122.362555] CPU: 2 PID: 2384 Comm: adbd Tainted: G W 4.1.0-0.rc4.git0.1.1.fc22.i686 #1 [ 122.362561] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/25/2014 [ 122.362567] c0d1f947 415badfa 00000000 d1029e64 c0a86e54 00000000 d1029e94 c045b937 [ 122.362584] c0c37f94 00000002 00000950 f9b313d4 00000d59 f9b2ebf0 f9b2ebf0 fffffff0 [ 122.362600] 00000003 deb53d00 d1029ea4 c045ba42 00000009 00000000 d1029f08 f9b2ebf0 [ 122.362617] Call Trace: [ 122.362633] [<c0a86e54>] dump_stack+0x41/0x52 [ 122.362645] [<c045b937>] warn_slowpath_common+0x87/0xc0 [ 122.362658] [<f9b2ebf0>] ? ffs_ep0_write+0x730/0x810 [usb_f_fs] [ 122.362668] [<f9b2ebf0>] ? ffs_ep0_write+0x730/0x810 [usb_f_fs] [ 122.362678] [<c045ba42>] warn_slowpath_null+0x22/0x30 [ 122.362689] [<f9b2ebf0>] ffs_ep0_write+0x730/0x810 [usb_f_fs] [ 122.362702] [<f9b2e4c0>] ? ffs_ep0_read+0x380/0x380 [usb_f_fs] [ 122.362712] [<c05a1c1f>] __vfs_write+0x2f/0x100 [ 122.362722] [<c05a42f2>] ? __sb_start_write+0x52/0x110 [ 122.362731] [<c05a2534>] vfs_write+0x94/0x1b0 [ 122.362740] [<c0a8a1c0>] ? mutex_lock+0x10/0x30 [ 122.362749] [<c05a2f41>] SyS_write+0x51/0xb0 [ 122.362759] [<c0a8c71f>] sysenter_do_call+0x12/0x12 [ 122.362766] ---[ end trace 0673d3467cecf8db ]--- in some cases (reproduction path below). This commit get back semantic of that flag and ensures that ffs_closed() is called always when needed but ffs_closed_callback() is called only if this flag is set. Reproduction path: Compile kernel without any UDC driver or bound some gadget to existing one and then: $ modprobe g_ffs $ mount none -t functionfs mount_point $ ffs-example mount_point This will fail with -ENODEV as there is no udc. $ ffs-example mount_point This will fail with -EBUSY because ffs_data has not been properly cleaned up. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-22usb: gadget: rndis: use signed type for a signed valueAndrzej Pietrasiewicz2-3/+3
rndis_get_nr() returns either a non-negative value on success or a negative value on failure. In case of failure an error code is returned to the caller of rndis_register(). If the "i" is unsigned, the information about error from rndis_get_nr() is lost. If there is no error but rndis_get_nr() returns a value greater than 256 the least significant bits of i are zero effectively limiting the number of configs to 256. This patch fixes that. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-22usb: gadget: rndis: don't duplicate the "i" variableAndrzej Pietrasiewicz1-1/+0
If CONFIG_USB_GADGET_DEBUG_FILES is set then a block is opened and inside it there is a local variable "i" which hides the "i" local to the rndis_deregister(). Consequently, a random value is formatted into the "name" buffer. This patch removes the block-local i. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-22usb: gadget: rndis: change the value passed to rndis_signal_(dis)connect()Andrzej Pietrasiewicz1-2/+2
The patch: 83210e59ee1527f229af6aef78c95b747bdcf9c4 usb: gadget: rndis: use rndis_params instead of configNr should change all invocations of rndis_signal_(dis)connect(). This patch fixes that. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-14usb: gadget: f_midi: fix segfault when reading empty idPawel Szewczyk1-1/+7
When midi function is created, 'id' attribute is initialized with SNDRV_DEFAULT_STR1, which is NULL pointer. Trying to read this attribute before filling it ends up with segmentation fault. This commit fix this issue by preventing null pointer dereference. Now f_midi_opts_id_show() returns empty string when id is a null pointer. Reproduction path: $ mkdir functions/midi.0 $ cat functions/midi.0/id [ 53.130132] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 53.132630] pgd = ec6cc000 [ 53.135308] [00000000] *pgd=6b759831, *pte=00000000, *ppte=00000000 [ 53.141530] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 53.146904] Modules linked in: usb_f_midi snd_rawmidi libcomposite [ 53.153071] CPU: 1 PID: 2936 Comm: cat Not tainted 3.19.0-00041-gcf4b216 #7 [ 53.160010] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 53.166088] task: ee234c80 ti: ec764000 task.ti: ec764000 [ 53.171482] PC is at strlcpy+0x8/0x60 [ 53.175128] LR is at f_midi_opts_id_show+0x28/0x3c [usb_f_midi] [ 53.181019] pc : [<c0222a9c>] lr : [<bf01bed0>] psr: 60000053 [ 53.181019] sp : ec765ef8 ip : 00000141 fp : 00000000 [ 53.192474] r10: 00019000 r9 : ed7546c0 r8 : 00010000 [ 53.197682] r7 : ec765f80 r6 : eb46a000 r5 : eb46a000 r4 : ed754734 [ 53.204192] r3 : ee234c80 r2 : 00001000 r1 : 00000000 r0 : eb46a000 [ 53.210704] Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment user [ 53.217907] Control: 10c5387d Table: 6c6cc04a DAC: 00000015 [ 53.223636] Process cat (pid: 2936, stack limit = 0xec764238) [ 53.229364] Stack: (0xec765ef8 to 0xec766000) [ 53.233706] 5ee0: ed754734 ed7546c0 [ 53.241866] 5f00: eb46a000 bf01bed0 eb753b80 bf01cc44 eb753b98 bf01b0a4 bf01b08c c0125dd0 [ 53.250025] 5f20: 00002f19 00000000 ec432e00 bf01cce8 c0530c00 00019000 00010000 ec765f80 [ 53.258184] 5f40: 00010000 ec764000 00019000 c00cc4ac ec432e00 c00cc55c 00000017 000081a4 [ 53.266343] 5f60: 00000001 00000000 00000000 ec432e00 ec432e00 00010000 00019000 c00cc620 [ 53.274502] 5f80: 00000000 00000000 00000000 00010000 ffff1000 00019000 00000003 c000e9a8 [ 53.282662] 5fa0: 00000000 c000e7e0 00010000 ffff1000 00000003 00019000 00010000 00019000 [ 53.290821] 5fc0: 00010000 ffff1000 00019000 00000003 7fffe000 00000001 00000000 00000000 [ 53.298980] 5fe0: 00000000 be8c68d4 0000b995 b6f0e3e6 40000070 00000003 00000000 00000000 [ 53.307157] [<c0222a9c>] (strlcpy) from [<bf01bed0>] (f_midi_opts_id_show+0x28/0x3c [usb_f_midi]) [ 53.316006] [<bf01bed0>] (f_midi_opts_id_show [usb_f_midi]) from [<bf01b0a4>] (f_midi_opts_attr_show+0x18/0x24 ) [ 53.327209] [<bf01b0a4>] (f_midi_opts_attr_show [usb_f_midi]) from [<c0125dd0>] (configfs_read_file+0x9c/0xec) [ 53.337180] [<c0125dd0>] (configfs_read_file) from [<c00cc4ac>] (__vfs_read+0x18/0x4c) [ 53.345073] [<c00cc4ac>] (__vfs_read) from [<c00cc55c>] (vfs_read+0x7c/0x100) [ 53.352190] [<c00cc55c>] (vfs_read) from [<c00cc620>] (SyS_read+0x40/0x8c) [ 53.359056] [<c00cc620>] (SyS_read) from [<c000e7e0>] (ret_fast_syscall+0x0/0x34) [ 53.366513] Code: ebffe3d3 e8bd8008 e92d4070 e1a05000 (e5d14000) [ 53.372641] ---[ end trace e4f53a4e233d98d0 ]--- Signed-off-by: Pawel Szewczyk <p.szewczyk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-07usb: gadget: rndis: remove the limit of available rndis connectionsAndrzej Pietrasiewicz3-86/+78
RNDIS function has a limitation on the number of allowed instances. So far it has been RNDIS_MAX_CONFIGS, which happens to be one. In order to eliminate this kind of arbitrary limitation we should not preallocate a predefined (RNDIS_MAX_CONFIGS) array of struct rndis_params instances but instead allow allocating them on demand. This patch allocates struct rndis_params on demand in rndis_register(). Coversly, the structure is free()'d in rndis_deregister(). If CONFIG_USB_GADGET_DEBUG_FILES is set, the proc files are created which is the same behaviour as before, but the moment of creation is delayed until struct rndis_params is actually allocated. rnids_init() and rndis_exit() have nothing to do, so they are eliminated. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-07usb: gadget: rndis: style correctionAndrzej Pietrasiewicz1-1/+1
Don't use a space between function name and parameter list opening bracket. All other functions in this file comply wich checkpatch rules. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-07usb: gadget: rndis: use rndis_params instead of configNrAndrzej Pietrasiewicz3-151/+129
RNDIS function has a limitation on the number of allowed instances. So far it has been RNDIS_MAX_CONFIGS, which happens to be one. In order to eliminate this kind of arbitrary limitation we should not preallocate a predefined (RNDIS_MAX_CONFIGS) array of struct rndis_params instances but instead allow allocating them on demand. This patch prepares the elimination of the said limit by converting all the functions which accept rndis config number to accept a pointer to the actual struct rndis_params. Consequently, rndis_register() returns a pointer to a corresponding struct rndis_params instance. The pointer is then always used by f_rndis.c instead of config number when it talks to rndis.c API. A nice side-effect of the changes is that many lines of code in rndis.c become shorter and fit in 80 columns. If a function prototype changes in rndis.h a style cleanup is made at the same time, otherwise checkpatch complains that the patch has style problems. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-27usb: gadget: uvc: remove unused including <linux/version.h>Wei Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-27usb: gadget: serial: fix re-ordering of tx dataPhilip Oberstaller1-1/+4
When a single thread is sending out data over the gadget serial port, gs_start_tx() will be called both from the sender context and from the write completion. Since the port lock is released before the packet is queued, the order in which the URBs are submitted is not guaranteed. E.g. sending thread completion (interrupt) gs_write() LOCK gs_write_complete() LOCK (wait) gs_start_tx() req1 = list_entry(pool->next) UNLOCK LOCK (acquired) gs_start_tx() req2 = list_entry(pool->next) UNLOCK usb_ep_queue(req2) usb_ep_queue(req1) I.e., req2 is submitted before req1 but it contains the data that comes after req1. To reproduce, use SMP with sending thread and completion pinned to different CPUs, or use PREEMPT_RT, and add the following delay just before the call to usb_ep_queue(): if (port->write_started > 0 && !list_empty(pool)) udelay(1000); To work around this problem, make sure that only one thread is running through the gs_start_tx() loop with an extra flag write_busy. Since gs_start_tx() is always called with the port lock held, no further synchronisation is needed. The original caller will continue through the loop when the request was successfully submitted. Signed-off-by: Philip Oberstaller <Philip.Oberstaller@septentrio.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-27usb: gadget: hid: Fix static variable usageKrzysztof Opasiak1-2/+14
If we have multiple instances of hid function, each of them may have different report descriptor, also their length may be different. Currently we are using static hidg_desc varable which is being filled in hidg_bind(). Then we send its content to host in hidg_setup() function. This content may have been already overwriten if another instance has executed hidg_bind(). Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-21Merge branch 'drm-next-merged' of ↵Mauro Carvalho Chehab14-728/+1672
git://people.freedesktop.org/~airlied/linux into v4l_for_linus * 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux: (9717 commits) media-bus: Fixup RGB444_1X12, RGB565_1X16, and YUV8_1X24 media bus format hexdump: avoid warning in test function fs: take i_mutex during prepare_binprm for set[ug]id executables smp: Fix error case handling in smp_call_function_*() iommu-common: Fix PARISC compile-time warnings sparc: Make LDC use common iommu poll management functions sparc: Make sparc64 use scalable lib/iommu-common.c functions Break up monolithic iommu table/lock into finer graularity pools and lock sparc: Revert generic IOMMU allocator. tools/power turbostat: correct dumped pkg-cstate-limit value tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL tools/power turbostat: correct DRAM RAPL units on recent Xeon processors tools/power turbostat: Initial Skylake support tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile tools/power turbostat: modprobe msr, if needed tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2 tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names Bluetooth: hidp: Fix regression with older userspace and flags validation config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected perf/x86/intel/pt: Fix and clean up error handling in pt_event_add() ... That solves several merge conflicts: Documentation/DocBook/media/v4l/subdev-formats.xml Documentation/devicetree/bindings/vendor-prefixes.txt drivers/staging/media/mn88473/mn88473.c include/linux/kconfig.h include/uapi/linux/media-bus-format.h The ones at subdev-formats.xml and media-bus-format.h are not trivial. That's why we opted to merge from DRM.
2015-04-15Merge branch 'for-linus-2' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second vfs update from Al Viro: "Now that net-next went in... Here's the next big chunk - killing ->aio_read() and ->aio_write(). There'll be one more pile today (direct_IO changes and generic_write_checks() cleanups/fixes), but I'd prefer to keep that one separate" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) ->aio_read and ->aio_write removed pcm: another weird API abuse infinibad: weird APIs switched to ->write_iter() kill do_sync_read/do_sync_write fuse: use iov_iter_get_pages() for non-splice path fuse: switch to ->read_iter/->write_iter switch drivers/char/mem.c to ->read_iter/->write_iter make new_sync_{read,write}() static coredump: accept any write method switch /dev/loop to vfs_iter_write() serial2002: switch to __vfs_read/__vfs_write ashmem: use __vfs_read() export __vfs_read() autofs: switch to __vfs_write() new helper: __vfs_write() switch hugetlbfs to ->read_iter() coda: switch to ->read_iter/->write_iter ncpfs: switch to ->read_iter/->write_iter net/9p: remove (now-)unused helpers p9_client_attach(): set fid->uid correctly ...
2015-04-15Merge branch 'for-linus-1' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs update from Al Viro: "Part one: - struct filename-related cleanups - saner iov_iter_init() replacements (and switching the syscalls to use of those) - ntfs switch to ->write_iter() (Anton) - aio cleanups and splitting iocb into common and async parts (Christoph) - assorted fixes (me, bfields, Andrew Elble) There's a lot more, including the completion of switchover to ->{read,write}_iter(), d_inode/d_backing_inode annotations, f_flags race fixes, etc, but that goes after #for-davem merge. David has pulled it, and once it's in I'll send the next vfs pull request" * 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (35 commits) sg_start_req(): use import_iovec() sg_start_req(): make sure that there's not too many elements in iovec blk_rq_map_user(): use import_single_range() sg_io(): use import_iovec() process_vm_access: switch to {compat_,}import_iovec() switch keyctl_instantiate_key_common() to iov_iter switch {compat_,}do_readv_writev() to {compat_,}import_iovec() aio_setup_vectored_rw(): switch to {compat_,}import_iovec() vmsplice_to_user(): switch to import_iovec() kill aio_setup_single_vector() aio: simplify arguments of aio_setup_..._rw() aio: lift iov_iter_init() into aio_setup_..._rw() lift iov_iter into {compat_,}do_readv_writev() NFS: fix BUG() crash in notify_change() with patch to chown_common() dcache: return -ESTALE not -EBUSY on distributed fs race NTFS: Version 2.1.32 - Update file write from aio_write to write_iter. VFS: Add iov_iter_fault_in_multipages_readable() drop bogus check in file_open_root() switch security_inode_getattr() to struct path * constify tomoyo_realpath_from_path() ...
2015-04-12make new_sync_{read,write}() staticAl Viro1-2/+0
All places outside of core VFS that checked ->read and ->write for being NULL or called the methods directly are gone now, so NULL {read,write} with non-NULL {read,write}_iter will do the right thing in all cases. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-12Merge branch 'iocb' into for-nextAl Viro1-2/+4
2015-04-03[media] gadget/uvc: embed video_deviceHans Verkuil2-27/+19
Embed the video_device struct to simplify the error handling and in order to (eventually) get rid of video_device_alloc/release. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-26fs: move struct kiocb to fs.hChristoph Hellwig1-0/+1
struct kiocb now is a generic I/O container, so move it to fs.h. Also do a #include diet for aio.h while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25Merge tag 'usb-for-v4.1' of ↵Greg Kroah-Hartman6-3/+1512
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.1 merge window As usual, a big pile of commits. This time a total of 111 non-merge commits. Other than the usual set of cleanups and non-critical fixes, we have some interesting work for AM335x's MUSB babble recovery. Now that takes a lot less time and we don't have to Reset MUSB all the time. The printer gadget has been converted to configfs interface and the atmel udc has learned suspend/resume with wakeup. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-23Merge 4.0-rc5 into usb-nextGreg Kroah-Hartman4-630/+101
We want the USB fixes in here as well to resolve merge conflicts. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-22Merge tag 'usb-4.0-rc5' of ↵Linus Torvalds3-505/+22
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY driver fixes from Greg KH: "Here's a number of USB and PHY driver fixes for 4.0-rc5. The largest thing here is a revert of a gadget function driver patch that removes 500 lines of code. Other than that, it's a number of reported bugs fixes and new quirk/id entries. All have been in linux-next for a while" * tag 'usb-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: common: otg-fsm: only signal connect after switching to peripheral uas: Add US_FL_NO_ATA_1X for Initio Corporation controllers / devices USB: ehci-atmel: rework clk handling MAINTAINERS: add entry for USB OTG FSM usb: chipidea: otg: add a_alt_hnp_support response for B device phy: omap-usb2: Fix missing clk_prepare call when using old dt name phy: ti/omap: Fix modalias phy: core: Fixup return value of phy_exit when !pm_runtime_enabled phy: miphy28lp: Convert to devm_kcalloc and fix wrong sizof phy: miphy365x: Convert to devm_kcalloc and fix wrong sizeof phy: twl4030-usb: Remove redundant assignment for twl->linkstat phy: exynos5-usbdrd: Fix off-by-one valid value checking for args->args[0] phy: Find the right match in devm_phy_destroy() phy: rockchip-usb: Fixup rockchip_usb_phy_power_on failure path phy: ti-pipe3: Simplify ti_pipe3_dpll_wait_lock implementation phy: samsung-usb2: Remove NULL terminating entry from phys array phy: hix5hd2-sata: Check return value of platform_get_resource phy: exynos-dp-video: Kill exynos_dp_video_phy_pwr_isol function Revert "usb: gadget: zero: Add support for interrupt EP" Revert "xhci: Clear the host side toggle manually when endpoint is 'soft reset'" ...
2015-03-18USB: gadget: f_mass_storage: use static attribute groups for sysfs entriesTakashi Iwai1-74/+33
Instead of manual device_create_file() and device_remove_file() calls, assign the static attribute groups to the lun device to register. The RO or RW permissions for some entries are decided in is_visible callback. This simplifies the code (also the logic) and avoids the possible races, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-13Merge branch 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-125/+79
Pull gadgetfs fixes from Al Viro: "Assorted fixes around AIO on gadgetfs: leaks, use-after-free, troubles caused by ->f_op flipping" * 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: gadgetfs: really get rid of switching ->f_op gadgetfs: get rid of flipping ->f_op in ep_config() gadget: switch ep_io_operations to ->read_iter/->write_iter gadgetfs: use-after-free in ->aio_read() gadget/function/f_fs.c: switch to ->{read,write}_iter() gadget/function/f_fs.c: use put iov_iter into io_data gadget/function/f_fs.c: close leaks move iov_iter.c from mm/ to lib/ new helper: dup_iter()
2015-03-13fs: split generic and aio kiocbChristoph Hellwig1-2/+3
Most callers in the kernel want to perform synchronous file I/O, but still have to bloat the stack with a full struct kiocb. Split out the parts needed in filesystem code from those in the aio code, and only allocate those needed to pass down argument on the stack. The aio code embedds the generic iocb in the one it allocates and can easily get back to it by using container_of. Also add a ->ki_complete method to struct kiocb, this is used to call into the aio code and thus removes the dependency on aio for filesystems impementing asynchronous operations. It will also allow other callers to substitute their own completion callback. We also add a new ->ki_flags field to work around the nasty layering violation recently introduced in commit 5e33f6 ("usb: gadget: ffs: add eventfd notification about ffs events"). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-13usb: gadget: f_printer: use non-zero flag for bitwise andAndrzej Pietrasiewicz1-1/+1
USB_DIR_OUT happens to be zero, so the result of bitwise and is always 0. Consequently, break will never happen in the SOFT_RESET case. This patch uses a compatible condition with a non-zero USB_DIR_IN, which might or might not evaluate to zero. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-13usb: gadget: printer: use after free in gprinter_alloc_inst()Dan Carpenter1-0/+1
There was a missing goto so we free "opts" and then dereference it. Fixes: ee1cd515e889 ('usb: gadget: printer: add configfs support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-13usb: gadget: printer: delete some dead codeDan Carpenter1-5/+0
"num" is a u16 so it can't go higher than 65535. kstrtou16() has a range check built in so this is already handled. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-13usb: gadget: serial: %pf is only for function pointersScott Wood1-1/+1
Use %ps for actual addresses, otherwise you'll get bad output on arches like ppc64 where %pf expects a function descriptor (which is not what __builtin_return_address returns). Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: linux-usb@vger.kernel.org CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-11usb: gadget: f_hid: remove unnecessary usb_ep_dequeue()Robert Baldyga1-1/+0
Function usb_ep_disable() causes completion of all requests queued for given endpoint, so there is no need to dequeue them after endpoint disabling. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-11usb: gadget: f_mass_storage: use defined constant instead of numeric valueTal Shorer1-1/+1
replace numeric value with TYPE_NO_LUN (defined in <scsi/scsi.h>) Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-11Revert "usb: gadget: zero: Add support for interrupt EP"Felipe Balbi3-505/+22
This reverts commit ef11982dd7a657512c362242508bb4021e0d67b6. That commit creates a problem for some UDCs (at least musb) where it allocates an endpoints with a 64-byte FIFO, but later tries to use that same FIFO for 1024-byte packets. Before implementing this, composite framework needs to be modified so we only allocate endpoints after we know negotiated speed, however that needs quite a bit of extra work. Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10usb: gadget: printer: add configfs supportAndrzej Pietrasiewicz2-2/+135
Add support for configfs interface so that f_printer can be used as a component of usb gadgets composed with it. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10usb: gadget: f_printer: remove compatibility layerAndrzej Pietrasiewicz1-113/+0
There are no old interface users left, so it can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10usb: gadget: f_printer: convert to new function interface with backward ↵Andrzej Pietrasiewicz3-1/+216
compatibility In order to add configfs support, a usb function must be converted to use the new interface. This patch converts the function to the new interface and provides backward compatiblity layer, which can be removed after all its users are converted to use the new interface. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10usb: gadget: printer: factor out f_printerAndrzej Pietrasiewicz1-0/+1279
The legacy printer gadget now contains both a reusable printer function and legacy gadget proper implementations interwoven, but logically separate. This patch factors out a reusable f_printer. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-02[media] uvc gadget: set device_caps in querycapHans Verkuil1-1/+2
The V4L2 core will warn if this is not done. Unfortunately this driver wasn't updated. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-02[media] uvc gadget: switch to unlocked_ioctlHans Verkuil1-1/+1
Instead of .ioctl use unlocked_ioctl. This allows us to finally remove the old .ioctl op. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 04:56:22 +0300