summaryrefslogtreecommitdiff
path: root/drivers/soc/bcm
AgeCommit message (Collapse)AuthorFilesLines
2018-06-27soc: bcm: brcmstb: Add missing DDR MEMC compatible stringsFlorian Fainelli1-0/+12
We would not be matching the following chip/compatible strings combinations, which would lead to not setting the warm boot flag correctly, fix that: 7260A0/B0: brcm,brcmstb-memc-ddr-rev-b.2.1 7255A0: brcm,brcmstb-memc-ddr-rev-b.2.3 7278Bx: brcm,brcmstb-memc-ddr-rev-b.3.1 The B2.1 core (which is in 7260 A0 and B0) doesn't have the SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL setup in the memsys init code, nor does it have the warm boot flag re-definition on entry. Those changes were for B2.2 and later MEMSYS cores. Fall back to the previous S2/S3 entry method for these specific chips. Fixes: 0b741b8234c8 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)") Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-06-27soc: bcm: brcmstb: pm: Add support for newer rev B3.0 controllersDoug Berger1-0/+4
Update the Device Tree binding document and add a matching entry for the MEMC DDR controller revision B3.0 which is found on chips like 7278A0 and newer. Signed-off-by: Doug Berger <opendmb@gmail.com> [florian: tweak commit message, make it apply to upstream kernel] Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-2/+4
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-17soc: bcm: raspberrypi-power: Fix use of __packedFlorian Fainelli1-1/+1
Commit a09cd356586d ("ARM: bcm2835: add rpi power domain driver") attempted to annotate the structure rpi_power_domain_packet with __packed but introduced a typo and made it named __packet instead. Just drop the annotation since the structure is naturally aligned already. Fixes: a09cd356586d ("ARM: bcm2835: add rpi power domain driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-01-15soc: bcm: brcmstb: Be multi-platform compatibleThierry Reding1-9/+29
We were making a bunch of wrong assumptions that turned out to blow out on non-Broadcom STB platforms: - we would return -ENODEV from brcmstb_soc_device_early_init() if we could not find the sun_top_ctrl device node, this is not an error in the context of a multi-platform kernel - we would still try to register the Broadcom STB SoC device, even if we are not running on such a platform While at it, also fix the sun_top_ctrl device_node leaks while we change the flow of brcmstb_soc_device_init() and brcmstb_soc_device_early_init(). Fixes: f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall") Signed-off-by: Thierry Reding <treding@nvidia.com> [florian: Combine all of Thierry's patch in one go for easier review] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-15soc: brcmstb: biuctrl: exit without warning on non brcmstb platformsSudeep Holla1-9/+11
Currently if this driver is included, we get the following warning on any platforms irrespective of whether it's brcmstb platform or not. " brcmstb: biuctrl: missing BIU control node brcmstb: biuctrl: MCP: Unable to disable write pairing! " This patch allows to exit early without any warning messages on non brcmstb platforms as it's meaningless for them. Cc: Brian Norris <computersforpeace@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Fixes: f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [florian: Add fixes tag, make initcall non fatal] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-12Revert "soc: brcmstb: Only register SoC device on STB platforms"Olof Johansson1-5/+0
This reverts commit 23a0d847992997000ca2223a19111ee778fbea63. Patch has issues that's being addressed by the Florian and he will follow up with a new patch to address the original issue. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-12soc: brcmstb: Only register SoC device on STB platformsThierry Reding1-0/+5
After moving the SoC device initialization to an early initcall in commit f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall"), the Broadcom STB SoC device is registered on all platforms if support for the device is enabled in the kernel configuration. This causes an additional SoC device to appear on platforms that already register a native one. In case of Tegra the STB SoC device is registered as soc0 (with totally meaningless content in the sysfs attributes) and causes various scripts and programs to fail because they don't know how to parse that data. To fix this, duplicate the check from brcmstb_soc_device_early_init() that already prevents the code from doing anything nonsensical on non- STB platforms. Fixes: f780429adfbc ("soc: brcmstb: biuctrl: Move to early_initcall") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-12-21soc: brcmstb: biuctrl: Move to early_initcallFlorian Fainelli1-2/+4
Being called during early_initcall() is early enough that it occurs before SMP initialization, which is all we care about for the Bus Interface Unit configuration. This solves lack of BIU initialization on ARM64 platforms where we do not have an anchor where to put the BIU initialization (since there are no machine descriptors). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-21soc: brcmstb: Split initializationFlorian Fainelli1-14/+13
We may need access to family_id and product_id fairly early on boot for other parts of the code (e.g: biuctrl.c), so split the initialization between an early_init() and an arch_initcall() which allows us to do that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-21soc: brcmstb: biuctrl: Fine tune B53 MCP interface settingsFlorian Fainelli1-0/+76
In order to achieve expected MCP bus throughput on 3 particular chips: 7268, 7271 and 7278, do the appropriate programming of the MCP interface: increase number of MCP write credits, turn on write-back throttling when present. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-21soc: brcmstb: biuctrl: Wire-up new registersFlorian Fainelli1-1/+7
Add definitions for B53 systems register: CPU_MCP_FLOW_REG and CPU_WRITEBACK_CTRL_REG. These register will be saved and restored accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-21soc: brcmstb: biuctrl: Prepare for saving/restoring other registersFlorian Fainelli1-17/+58
In preparation for saving/restoring additional registers required on some newer platforms (7268, 7271, 7278), migrate the code to use enums and helper functions to access registers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-21soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUsFlorian Fainelli1-3/+21
On Broadcom Brahma-B53 CPUs, the CPU_CREDIT_REG offset got moved to 0x0b0 instead of 0x184, correct this such that we correcty enable/disable write-pairing for these chips. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-12-21soc: brcmstb: Make CPU credit offset more parameterizedFlorian Fainelli1-5/+6
In preparation for fixing and changing values in the CPU_CREDIT_REG register for B53-based systems, make the offset parameterized. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-11-17Merge tag 'armsoc-drivers' of ↵Linus Torvalds11-0/+1923
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
2017-10-03soc: brcmstb: Add Product ID and Family ID helper functionsAl Cooper1-0/+12
Add Product ID and Family ID helper functions for brcmstb soc. Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-25soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)Justin Chen6-2/+821
This commit adds support for the Broadcom STB S2/S3/S5 suspend states on MIPS based SoCs. This requires quite a lot of code in order to deal with the different HW blocks that need to be quiesced during suspend: - DDR PHY - DDR memory controller and arbiter - control processor The final steps of the suspend execute in cache and there is is a little bit of assembly code in order to shut down the DDR PHY PLL and then go into a wait loop until a wake-up even occurs. Conversely the resume part involves waiting for the DDR PHY PLL to come back up and resume executions where we left. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-25soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)Brian Norris8-0/+1104
This commit adds support for the Broadcom STB S2/S3/S5 suspend states on ARM based SoCs. This requires quite a lot of code in order to deal with the different HW blocks that need to be quiesced during suspend: - DDR PHY SHIM - DDR memory controller and sequencer - control processor The final steps of the suspend execute in an on-chip SRAM and there is a little bit of assembly code in order to shut down the DDR PHY PLL and then go into a wfi loop until a wake-up even occurs. Conversely the resume part involves waiting for the DDR PHY PLL to come back up and resume executions where we left. For S3, because of our memory hashing (actual hashing code not included for simplicity, and is bypassed) we need to relocate the writable variables (stack) into SRAM shortly before suspending in order to leave the DRAM untouched and create a reliable hash of its contents. This code has been contributed by Brian Norris initially and has been incrementally fixed and updated to support new chips by a lot of people. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Gareth Powell <gpowell@broadcom.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-06-19Merge tag 'arm-soc/for-4.13/drivers' of http://github.com/Broadcom/stblinux ↵Olof Johansson1-1/+1
into next/drivers This pull request contains Broadcom ARM/ARM64 SoCs specific driver changes for 4.13, please pull the following: - Doug adds support for the latest generation GISB bus arbiter (v7), he starts by fixing two issues in how registers are written, and how 64-bit addresses are captured and then he simplifies the error interception by using notifiers, which allows him to add support for ARM64 - Markus updates the SOC_BRCMSTB Kconfig depends to cover ARM64 and BMIPS_GENERIC systems where this code is now also used * tag 'arm-soc/for-4.13/drivers' of http://github.com/Broadcom/stblinux: soc: brcmstb: enable drivers for ARM64 and BMIPS bus: brcmstb_gisb: update to support new revision bus: brcmstb_gisb: enable driver for ARM64 architecture bus: brcmstb_gisb: remove low-level ARM hooks bus: brcmstb_gisb: add notifier handling bus: brcmstb_gisb: correct support for 64-bit address output bus: brcmstb_gisb: Use register offsets with writes too Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-12soc: brcmstb: enable drivers for ARM64 and BMIPSMarkus Mayer1-1/+1
We enable the BRCMSTB SoC drivers not only for ARM, but also ARM64 and BMIPS. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-05-14soc: bcm: brcmstb: Correctly match 7435 SoCFlorian Fainelli1-1/+1
Remove the duplicate brcm,bcm7425-sun-top-ctrl compatible string and replace it with brcm,bcm7435-sun-top-ctrl which was intended. Fixes: bd0faf08dc7f ("soc: bcm: brcmstb: Match additional compatible strings") Reported-by: Andreas Oberritter <obi@saftware.de> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-03-06soc: bcm: brcmstb: Match additional compatible stringsFlorian Fainelli1-0/+9
Match all known sun-top-ctrl compatible strings from our MIPS chips counterparts. This allows us to properly report the SoC information to user-space through our SoC driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-07-07soc: raspberrypi-power: add CONFIG_OF dependencyArnd Bergmann1-2/+1
We get a harmless warning if the RASPBERRYPI_POWER driver is enabled without CONFIG_OF during compile testing: warning: RASPBERRYPI_POWER selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF) There is no need to select PM_GENERIC_DOMAINS_OF if OF is set, so we can replace the 'select' with a dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Eric Anholt <eric@anholt.net>
2016-06-07soc: brcmstb: fix warning from missing includeBen Dooks1-0/+1
The brcmstb_biuctrl_init() is defined in the soc specific header file, but wasn't included in the driver file. Fix the following warning by including <linux/soc/brcmstb/brcmstb.h> in the driver: drivers/soc/brcmstb/biuctrl.c:101:13: warning: symbol 'brcmstb_biuctrl_init' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-05-31soc: Move brcmstb to bcm/brcmstbFlorian Fainelli5-0/+232
Unify the different Broadcom SoCs directory and have everybody live under drivers/soc/bcm/*. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-01-01ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependencyArnd Bergmann1-1/+1
The firmware driver can be a loadable module, but the power domain can only be built-in, so we get a build error in an allmodconfig kernel: :(.text+0x17e59c): undefined reference to `rpi_firmware_property' :(.text+0x17e51c): undefined reference to `rpi_firmware_get' :(.text+0x17e244): undefined reference to `rpi_firmware_property' This changes the dependency to only allow the power domain code to be enabled when the firmware driver is built-in. Other users of the firmware driver may still be loadable modules and not everyone needs the power domains, so we don't change the firmware code. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-22ARM: bcm2835: add rpi power domain driverAlexander Aring3-0/+257
This patch adds support for several power domains on Raspberry Pi, including USB (so it can be enabled even if the bootloader didn't do it), and graphics. This patch is the combined work of Eric Anholt (who wrote USB support inside of the Raspberry Pi firmware driver, and wrote the non-USB domain support) and Alexander Aring (who separated the original USB work out from the firmware driver). Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 13:14:49 +0300