summaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)AuthorFilesLines
2011-01-08Merge branch 'rmobile-latest' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (67 commits) ARM: mach-shmobile: update for SMP changes. ARM: mach-shmobile: update for GIC changes. ARM: mach-shmobile: Fix up clkdev fallout for SH73A0. dma: shdma: don't register the global die notifier multiple times ARM: mach-shmobile: Rely on run-time IRQ handlers ARM: mach-shmobile: Run-time IRQ handler for GIC ARM: mach-shmobile: Run-time IRQ handler for INTCA ARM: mach-shmobile: Enable CONFIG_MULTI_IRQ_HANDLER ARM: mach-shmobile: Use shared GIC entry macros ARM: mach-shmobile: mackerel: Add zboot support ARM: mach-shmobile: mackerel: Add HDMI sound support ARM: mach-shmobile: mackerel: add HDMI video support ARM: mach-shmobile: ap4evb: fixup clk_put timing of fsib_clk ARM: mach-shmobile: sh73a0: fix div4 table ARM: mach-shmobile: ap4/mackerel: modify wrong comment out of USB ARM: mach-shmobile: Mackerel VGA camera support mmc: sh_mmcif: make DMA support by the driver unconditional ARM: mach-shmobile: Add eMMC support through MMCIF on AG5EVM ARM: mach-shmobile: Use pullups for AG5EVM KEYSC pins ARM: mach-shmobile: sh73a0 GPIO pullup improvement ...
2011-01-08Merge branch 'tty-next' of ↵Linus Torvalds14-78/+3867
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (36 commits) serial: apbuart: Fixup apbuart_console_init() TTY: Add tty ioctl to figure device node of the system console. tty: add 'active' sysfs attribute to tty0 and console device drivers: serial: apbuart: Handle OF failures gracefully Serial: Avoid unbalanced IRQ wake disable during resume tty: fix typos/errors in tty_driver.h comments pch_uart : fix warnings for 64bit compile 8250: fix uninitialized FIFOs ip2: fix compiler warning on ip2main_pci_tbl specialix: fix compiler warning on specialix_pci_tbl rocket: fix compiler warning on rocket_pci_ids 8250: add a UPIO_DWAPB32 for 32 bit accesses 8250: use container_of() instead of casting serial: omap-serial: Add support for kernel debugger serial: fix pch_uart kconfig & build drivers: char: hvc: add arm JTAG DCC console support RS485 documentation: add 16C950 UART description serial: ifx6x60: fix memory leak serial: ifx6x60: free IRQ on error Serial: EG20T: add PCH_UART driver ... Fixed up conflicts in drivers/serial/apbuart.c with evil merge that makes the code look fairly sane (unlike either side).
2011-01-07Merge branch 'omap-for-linus' of ↵Linus Torvalds2-33/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits) omap2: Make OMAP2PLUS select OMAP_DM_TIMER OMAP4: hwmod data: Fix alignment and end of line in structurefields OMAP4: hwmod data: Move the DMA structures OMAP4: hwmod data: Move the smartreflex structures OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc arm: omap: tusb6010: add name for MUSB IRQ arm: omap: craneboard: Add USB EHCI support omap2+: Initialize serial port for dynamic remuxing for n8x0 omap2+: Add struct omap_board_data and use it for platform level serial init omap2+: Allow hwmod state changes to mux pads based on the state changes omap2+: Add support for hwmod specific muxing of devices omap2+: Add omap_mux_get_by_name OMAP2: PM: fix compile error when !CONFIG_SUSPEND MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership OMAP4: Smartreflex framework extensions OMAP4: hwmod: Add inital data for smartreflex modules. OMAP4: PM: Program correct init voltages for scalable VDDs OMAP4: Adding voltage driver support OMAP4: Register voltage PMIC parameters with the voltage layer OMAP3: PM: Program correct init voltages for VDD1 and VDD2 ... Fix up trivial conflict in arch/arm/plat-omap/Kconfig
2011-01-07Merge branch 'master' of ↵Paul Mundt3-33/+569
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmobile-latest Conflicts: arch/arm/mach-shmobile/Kconfig Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-31/+561
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits) ARM: DMA: add support for DMA debugging ARM: PL011: add DMA burst threshold support for ST variants ARM: PL011: Add support for transmit DMA ARM: PL011: Ensure IRQs are disabled in UART interrupt handler ARM: PL011: Separate hardware FIFO size from TTY FIFO size ARM: PL011: Allow better handling of vendor data ARM: PL011: Ensure error flags are clear at startup ARM: PL011: include revision number in boot-time port printk ARM: vexpress: add sched_clock() for Versatile Express ARM i.MX53: Make MX53 EVK bootable ARM i.MX53: Some bug fix about MX53 MSL code ARM: 6607/1: sa1100: Update platform device registration ARM: 6606/1: sa1100: Fix platform device registration ARM i.MX51: rename IPU irqs ARM i.MX51: Add ipu clock support ARM: imx/mx27_3ds: Add PMIC support ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn() mx51: fix usb clock support MX51: Add support for usb host 2 arch/arm/plat-mxc/ehci.c: fix errors/typos ...
2011-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6Linus Torvalds1-1/+7
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (25 commits) atyfb: Fix bootup hangs on sparc64. sparc: update copyright in piggyback.c sparc: unify strip command in boot/Makefile sparc: rename piggyback_32 to piggyback sparc: fix tftpboot.img for sparc64 on little-endian host sparc: add $BITS to piggyback arguments sparc: remove obsolete ELF support in piggyback_32.c sparc: additional comments to piggyback_32.c sparc: use _start for the start entry (like 64 bit does) sparc: use trapbase in setup_arch sparc: refactor piggy_32.c Added support for ampopts in APBUART driver. Used in AMP systems. APBUART: added raw AMBA vendor/device number to match against. SPARC/LEON: avoid AMBAPP name duplicates in openprom fs when REG is missing SPARC/LEON: added support for selecting Timer Core and Timer within core LEON: added raw AMBA vendor/device number to find TIMER, IRQCTRL SPARC/LEON: added support for IRQAMP IRQ Controller SPARC/LEON: find IRQCTRL and Timer via OF-Tree, instead of hardcoded. sparc: fix sparse warnings in arch/sparc/prom for 32 bit build sparc: remove unused prom tree functions ...
2011-01-07Merge branch 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds1-1/+1
* 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm: (35 commits) mmc: msm_sdcc: Check for only DATA_END interrupt to end a request mmc: msm_sdcc: Fix bug in PIO mode when data size is not word aligned mmc: msm_sdcc: Reset SDCC in case of data transfer errors mmc: msm_sdcc: Add prog done interrupt support mmc: msm_sdcc: Fix possible circular locking dependency warning MSM: Add USB support for MSM7x30 MSM: Add USB suport for QSD8x50 msm: initial framebuffer support msm: add handling for clocks tagged as CLK_MINMAX msm: trout: change name of pmdh_clk to mddi_clk msm: add CLK_MINMAX to pmdh_clk msm: trout: add gpio_to_irq msm: iommu: Use the correct memory allocation flag msm_serial: Remove redundant unlikely() msm: iommu: Miscellaneous code cleanup msm: iommu: Support cache-coherent memory access msm: iommu: Definitions for extended memory attributes msm: iommu: Kconfig dependency for the IOMMU API msm: iommu: Check if device is already attached msm: iommu: Kconfig item for cacheable page tables ...
2011-01-06serial: apbuart: Fixup apbuart_console_init()Thomas Gleixner1-2/+3
commit 35c64e5d (drivers: serial: apbuart: Handle OF failures gracefully) missed that the modified grlib_apbuart_configure() function is called from apbuart_console_init() as well. Fix the fallout. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-05Merge branches 'mmci' and 'pl011-dma' into develRussell King1-31/+561
2011-01-05ARM: PL011: add DMA burst threshold support for ST variantsRussell King1-0/+12
ST Micro variants has some specific dma burst threshold compensation, which allows them to make better use of a DMA controller. Add support to set this up. Based on a patch from Linus Walleij. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-05ARM: PL011: Add support for transmit DMARussell King1-2/+506
Add DMA engine support for transmit to the PL011 driver. Based on a patch from Linus Walliej, with the following changes: - remove RX DMA support. As PL011 doesn't give us receive timeout interrupts, we only get notified of received data when the RX DMA has completed. This rather sucks for interactive use of the TTY. - remove abuse of completions. Completions are supposed to be for events, not to tell what condition buffers are in. Replace it with a simple 'queued' bool. - fix locking - it is only safe to access the circular buffer with the port lock held. - only map the DMA buffer when required - if we're ever behind an IOMMU this helps keep IOMMU usage down, and also ensures that we're legal when we change the scatterlist entry length. - fix XON/XOFF sending - we must send XON/XOFF characters out as soon as possible - waiting for up to 4095 characters in the DMA buffer to be sent first is not acceptable. - fix XON/XOFF receive handling - we need to stop DMA when instructed to by the TTY layer, and restart it again when instructed to. There is a subtle problem here: we must not completely empty the circular buffer with DMA, otherwise we will not be notified of XON. - change the 'enable_dma' flag into a 'using DMA' flag, and track whether we can use TX DMA by whether the channel pointer is non-NULL. This gives us more control over whether we use DMA in the driver. - we don't need to have the TX DMA buffer continually allocated for each port - instead, allocate it when the port starts up, and free it when it's shut down. Update the 'using DMA' flag if we get the buffer, and adjust the TTY FIFO size appropriately. - if we're going to use PIO to send characters, use the existing IRQ based functionality rather than reimplementing it. This also ensures we call uart_write_wakeup() at the appropriate time, otherwise we'll stall. - use DMA engine helper functions for type safety. - fix init when built as a module - we can't have to initcall functions, so we must settle on one. This means we can eliminate the deferred DMA initialization. - there is no need to terminate transfers on a failed prep_slave_sg() call - nothing has been setup, so nothing needs to be terminated. This avoids a potential deadlock in the DMA engine code (tasklet->callback->failed prepare->terminate->tasklet_disable which then ends up waiting for the tasklet to finish running.) - Dan says that the submission callback should not return an error: | dma_submit_error() is something I should have removed after commit | a0587bcf "ioat1: move descriptor allocation from submit to prep" all | errors should be notified by prep failing to return a descriptor | handle. Negative dma_cookie_t values are only returned by the | dma_async_memcpy* calls which translate a prep failure into -ENOMEM. So remove the error handling at that point. This also solves the potential deadlock mentioned in the previous comment. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-05ARM: PL011: Ensure IRQs are disabled in UART interrupt handlerRussell King1-2/+3
As the DMA support introduces a separate interrupt-time callback, our interrupt handler will not be the only handler which takes the port lock, so we need to ensure that IRQs are disabled. We must use the _irqsave variant so we don't inadvertently enable interrupts. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-05ARM: PL011: Separate hardware FIFO size from TTY FIFO sizeRussell King1-3/+5
With DMA support, we need to tell the TTY subsystem that the DMA buffer is the size of the FIFO, otherwise things like tty_wait_until_sent() will time out too early. Keep (and use) the hardware value separately from the port->fifosize. This was part of a larger patch from Linus Walleij, with a little modification. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-05ARM: PL011: Allow better handling of vendor dataRussell King1-24/+27
Rather than copying all vendor data into the port structure, copy just that which is frequently used, and keep a pointer to the remaining vendor data structure. This makes it easier to add vendor quirks in the future. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-05ARM: PL011: Ensure error flags are clear at startupRussell King1-0/+4
The error flags weren't being cleared upon UART startup, which can cause problems when we add DMA support. It's good practice to ensure that these flags are cleared anyway, so let's do so. This was part of a larger patch from Linus Walleij. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-05ARM: PL011: include revision number in boot-time port printkRussell King1-1/+5
Include the revision number of the PL011 primecell in the boot-time port printk to allow proper identification of the peripheral. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-04Added support for ampopts in APBUART driver. Used in AMP systems.Daniel Hellstrom1-1/+4
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04APBUART: added raw AMBA vendor/device number to match against.Daniel Hellstrom1-0/+3
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21Merge branches 'msm-core' and 'msm-mmc' into for-nextDavid Brown1-1/+1
* msm-core: (28 commits) msm: initial framebuffer support msm: add handling for clocks tagged as CLK_MINMAX msm: trout: change name of pmdh_clk to mddi_clk msm: add CLK_MINMAX to pmdh_clk msm: trout: add gpio_to_irq msm: iommu: Use the correct memory allocation flag msm_serial: Remove redundant unlikely() msm: iommu: Miscellaneous code cleanup msm: iommu: Support cache-coherent memory access msm: iommu: Definitions for extended memory attributes msm: iommu: Kconfig dependency for the IOMMU API msm: iommu: Check if device is already attached msm: iommu: Kconfig item for cacheable page tables msm: iommu: Don't flush page tables if no devices attached msm: iommu: Mark functions with the right section names msm: iommu: Support for the 2nd GFX core's IOMMU msm: iommu: Revise GFX2D0 IOMMU contexts and M2V mappings msm: iommu: Revise GFX3D IOMMU contexts and M2V mappings msm: iommu: Use more consistent naming in platform data msm: iomap: Addresses and IRQs for 2nd GFX core IOMMU ... * msm-mmc: (33 commits) mmc: msm_sdcc: Check for only DATA_END interrupt to end a request mmc: msm_sdcc: Fix bug in PIO mode when data size is not word aligned mmc: msm_sdcc: Reset SDCC in case of data transfer errors mmc: msm_sdcc: Add prog done interrupt support mmc: msm_sdcc: Fix possible circular locking dependency warning msm: initial framebuffer support msm: add handling for clocks tagged as CLK_MINMAX msm: trout: change name of pmdh_clk to mddi_clk msm: add CLK_MINMAX to pmdh_clk msm: trout: add gpio_to_irq msm: iommu: Use the correct memory allocation flag msm_serial: Remove redundant unlikely() msm: iommu: Miscellaneous code cleanup msm: iommu: Support cache-coherent memory access msm: iommu: Definitions for extended memory attributes msm: iommu: Kconfig dependency for the IOMMU API msm: iommu: Check if device is already attached msm: iommu: Kconfig item for cacheable page tables msm: iommu: Don't flush page tables if no devices attached msm: iommu: Mark functions with the right section names ...
2010-12-20Merge branch 'rmobile/urgent' into rmobile-latestPaul Mundt3-18/+11
Conflicts: arch/arm/mach-shmobile/include/mach/entry-macro.S Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-18Merge branch 'devel-board' into omap-for-linusTony Lindgren1-1/+2
2010-12-17drivers: serial: apbuart: Handle OF failures gracefullyThomas Gleixner1-29/+19
The apbuart driver depends on OF and relies on everything being available. So if it's probed on a platform which has OF support, but no device tree is available it crashes. Triggered by the upcoming x86 OF support in randconfig testing. Further it's inconsistent vs. the probing and exiting from the of_match loop. Make it robust and consistent: - check the availablility of OF nodes before dereferencing - return -ENODEV when the device tree lookup fails - return -ENODEV when no uart port configuration is found - return -ENODEV when invalid uart port configuration is found Remove the enum_done check while at it. Driver init functions are only called once. Remove the pointless vendor and device queries as well. Reported-by: Ingo Molnar <mingo.elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-17Serial: Avoid unbalanced IRQ wake disable during resumeGovindraj.R1-2/+6
To avoid unbalanced IRQ wake disable, ensure that wakeups are disabled only when wakeups have been successfully enabled. Tested on OMAP3630SDP/ZOOM3. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Reported-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-17pch_uart : fix warnings for 64bit compileTomoya MORINAGA1-6/+7
Fix the following warnings drivers/serial/pch_uart.c: In function ‘dma_handle_rx’: drivers/serial/pch_uart.c:685:24: warning: cast from pointer to integer of different size drivers/serial/pch_uart.c: In function ‘dma_handle_tx’: drivers/serial/pch_uart.c:778:23: warning: cast from pointer to integer of different size drivers/serial/pch_uart.c: In function ‘pch_uart_init_port’: drivers/serial/pch_uart.c:1289:20: warning: cast to pointer from integer of different size drivers/serial/pch_uart.c: In function ‘pch_uart_exit_port’: drivers/serial/pch_uart.c:1328:2: warning: cast from pointer to integer of different size Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Reported-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15Merge branch 'for_linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdboc,input: Fix regression with keyboard release key and early debugging
2010-12-14kgdboc,input: Fix regression with keyboard release key and early debuggingJason Wessel1-1/+2
The commit 111c182340cd22e238ab1cc6564df336c6ebd7cb (kgdboc: reset input devices (keyboards) when exiting debugger) introduced a regression in early debugging such that you get a kernel oops on continue (with the go command) if you boot a kernel with: earlyprintk=vga ekgdboc=kbd kgdbwait The restore kgdboc_restore_input() routine schedules work for the purpose of sending key release events for any keys that were in the depressed state prior to entering the kernel debugger. A simple fix to the crash is to not invoke the schedule_work() if the kernel system_state is anything other than SYSTEM_RUNNING. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com>
2010-12-118250: fix uninitialized FIFOsOndrej Puzman1-0/+2
I have found a bug in 8250.c driver which causes that 16550A uart FIFOs are not turned on during initialization if they are manually configured by setserial. UART is then working only as plain 16450 without FIFOs. On systems with higher interrupt latency this causes buffer overruns and loss of received data when using higher communication speeds. I'm working for a company which produces industrial computers. These devices typically contain high number (8 or more) of traditional 16550A uarts - we use TL16C554A chips, but that is not much relevant. UARTs are connected to the CPU by ISA bus (Celeron based devices) or LPC bus (Atom based devices). In the Linux the UARTs are using standard 8250.c driver and are initialized using setserial command: setserial /dev/ttyS4 uart 16550A port 0x3E0 irq 10 baud_base 115200 This executes the UART initialization through serial8250_startup() function. At the beginning of the function up->capabilities is initialized from uart_config: up->capabilities = uart_config[up->port.type].flags; Please note that neither up->port.fifosize nor up->tx_loadsz is initialized here!! Later in the same function serial8250_clear_fifos() is called and disables FIFOs. The above comment says that they will be reenabled in set_termios (they won't ...) After serial8250_startup() the serial8250_set_termios() is called. In this function the following check fails because up->port.fifosize is zero because it is not initialized correctly. if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { if (baud < 2400) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; else fcr = uart_config[up->port.type].fcr; } fcr variable remains zero and in the end the FCR register is set to zero which results in disabled FIFOs even if the UART type is 16550A. This is also true for other types of UARTs with FIFOs. If the UART is autoconfigured via 'setserial /dev/ttySx autoconfig' then port.fifosize and tx_loadsz are initialized correctly in the autoconfig() function and the UART is working correctly then. I checked the source codes and I can say that this bug is present in 2.6.x series of kernels for a couple of years. Namely I can confirm its presence in 2.6.16.57, 2.6.32.24 and 2.6.36.1 (tested all of them on our hardware). I think it was not noticed before because not many people use manually configured non PNP UARTs on ISA/LPC bus these days. Also the data loss caused by buffer overruns occures only if IRQ latency is higher then time needed to receive one character on given communication speed. For example our hardware looses received characters only if the UARTs are connected throught LPC bus with SERIRQ (serial IRQ transport) and not if they are connected to ISA bus because LPC SERIRQ has higher interrupt latency then parallel ISA interupt lines. Here is the patch to correct the bug created against 2.6.36.1: Signed-off-by: Ondrej Puzman <puzman@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-118250: add a UPIO_DWAPB32 for 32 bit accessesJamie Iles2-12/+41
Some platforms contain a Synopsys DesignWare APB UART that is attached to a 32-bit APB bus where sub-word accesses are not allowed. Add a new IO type (UPIO_DWAPB32) that performs 32 bit acccesses to the UART. v2: - don't test for 32 bit in the output fast path, provide a separate dwabp32_serial_out() function. Refactor dwabp_serial_out() so that we can reuse the LCR saving code. v3: - rebased on top of "8250: use container_of() instead of casting" Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-118250: use container_of() instead of castingJamie Iles1-20/+40
The 8250 driver structure uart_8250_port took advantage of the fact that the struct uart_port was the first member of its structure and used an explicit cast to convert to the derived class. Replace the explicit casts with container_of() for safety and clarity. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-11serial: omap-serial: Add support for kernel debuggerCosmin Cojocar2-7/+33
The kgdb invokes the poll_put_char and poll_get_char when communicating with the host. This patch also changes the initialization order because the kgdb will check at the very beginning, if there is a valid serial driver. Signed-off-by: Cosmin Cojocar <cosmin.cojocar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-11serial: fix pch_uart kconfig & buildRandy Dunlap1-1/+2
The dma_request_channel/dma_release_channel interfaces are not built when DMADEVICES is not enabled, so make the driver depend on DMADEVICES. Also, the help text says that the driver enables & uses PCH_DMA, which is not enabled, so select that. ERROR: "__dma_request_channel" [drivers/serial/pch_uart.ko] undefined! ERROR: "dma_release_channel" [drivers/serial/pch_uart.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Reported-by: Zimny Lech <napohybelskurwysynom2010@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10Merge branch 'devel-omap-irq' into omap-for-linusTony Lindgren2-17/+9
2010-12-10msm_serial: Remove redundant unlikely()Tobias Klauser1-1/+1
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David Brown <davidb@codeaurora.org>
2010-12-02Merge branch 'tty-linus' of ↵Linus Torvalds2-17/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: mfd: adjust the baud rate setting TTY: open/hangup race fixup TTY: don't allow reopen when ldisc is changing NET: wan/x25, fix ldisc->open retval TTY: ldisc, fix open flag handling serial8250: Mark console as CON_ANYTIME
2010-12-01serial: mfd: adjust the baud rate settingFeng Tang1-16/+8
Previous baud rate setting code only has been tested with 3.5M/9600/ 115200/230400/460800 bps, and recently we got a 3M bps device to test, which needs to modify current MUL register setting, and with this patch 2.5M/2M/1.5M/1M/0.5M should also work as they just use a MUL value scale down from 3M's. Also got some reference register setting from silicon guys for different baud rates, which tries to keep the pre-scalar register value to 16. Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-01serial: ifx6x60: fix memory leakVasiliy Kulikov1-0/+1
If tty_register_driver() failed then tty_driver is still alive. Free it with put_tty_driver(). Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-01serial: ifx6x60: free IRQ on errorVasiliy Kulikov1-1/+3
If second request_irq() failed then the first IRQ must be freed in error handling code. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-01Serial: EG20T: add PCH_UART driverTomoya MORINAGA3-0/+1459
UART driver of Intel EG20T(Topcliff) PCH Intel EG20T PCH is the platform controller hub that is going to be used in Intel's general embedded platform. All IO peripherals in Intel EG20T PCH are actually devices sitting on AMBA bus. Intel EG20T PCH has UART I/F. Using this I/F, it is able to access system devices connected to UART. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-01Serial: ce4100: Add PCI UART support for the ce4100Dirk Brandewie1-0/+36
This patch adds support for the PCI UART on the ce4100. Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-01omap: Serial: Define register access modes in LCRAndrei Emeltchenko2-30/+30
Access to some registers depends on register access mode Three different modes are available for OMAP (at least) • Operational mode LCR_REG[7] = 0x0 • Configuration mode A LCR_REG[7] = 0x1 and LCR_REG[7:0]! = 0xBF • Configuration mode B LCR_REG[7] = 0x1 and LCR_REG[7:0] = 0xBF Define access modes and remove redefinitions and magic numbers in serial drivers (and later in bluetooth driver). Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-01OMAP: Serial: Define OMAP uart MDR1 reg and remove magic numbersAndrei Emeltchenko1-3/+3
Define MDR1 register serial definitions used in serial and bluetooth drivers. Change magic number to ones defined in serial_reg for omap1/2 serial driver. Remove redefined MDR1 register definitions in omap-serial driver. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: G, Manjunath Kondaiah <manjugk@ti.com> Acked-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-24Merge branches 'rmobile/ag5' and 'rmobile/fsi-despair' into rmobile-latestPaul Mundt2-2/+0
2010-11-18ARM: mach-shmobile: Initial AG5 and AG5EVM supportMagnus Damm1-0/+7
This patch adds initial support for Renesas SH-Mobile AG5. At this point the AG5 CPU support is limited to the ARM core, SCIF serial and a CMT timer together with L2 cache and the GIC. The AG5EVM board also supports Ethernet. Future patches will add support for GPIO, INTCS, CPGA and platform data / driver updates for devices such as IIC, LCDC, FSI, KEYSC, CEU and SDHI among others. The code in entry-macro.S will be cleaned up when the ARM IRQ demux code improvements have been merged. Depends on the AG5EVM mach-type recently registered but not yet present in arch/arm/tools/mach-types. As the AG5EVM board comes with 512MiB memory it is recommended to turn on HIGHMEM. Many thanks to Yoshii-san for initial bring up. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann2-2/+0
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17serial8250: Mark console as CON_ANYTIMEPeter Zijlstra1-1/+1
While trying to debug a cpu-hotplug issue I noticed printk() stopped working once the cpu got marked offline, since the 8250 serial console doesn't have any per-cpu resources the CON_ANYTIME bit is the safe and documented way to make it work again. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16serial: ifx6x60: Fix missing include for msleepAlan Cox1-0/+1
Noted by Stephen Rothwell Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16serial: ifx6x60: The IFX requires SPIAlan Cox1-1/+1
Correct the KConfig as noted by Greg. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16serial: mpc52xx: make printout for type more genericWolfram Sang1-1/+5
The printout for the type should be just "5xxx", so 512x users won't wonder why they have a mpc52xx-type UART. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-13Revert "8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang"Ingo Molnar1-4/+1
This reverts commit 47d3904fe40d62deee8cd46e79ca784e7a548acd. Crashes any x86 serial console bootup: Console: colour VGA+ 80x25 BUG: unable to handle kernel NULL pointer dereference at 0000000000000158 IP: [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430 ... Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Greg KH <gregkh@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-13Merge branch 'tty-linus' of ↵Linus Torvalds3-11/+30
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: n_gsm: Fix length handling n_gsm: Copy n2 over when configuring via ioctl interface serial: bfin_5xx: grab port lock before making port termios changes serial: bfin_5xx: disable CON_PRINTBUFFER for consoles serial: bfin_5xx: remove redundant SSYNC to improve TX speed serial: bfin_5xx: always include DMA headers vcs: make proper usage of the poll flags amiserial: Remove unused variable icount 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang tty_ldisc: Fix BUG() on hangup TTY: restore tty_ldisc_wait_idle SERIAL: blacklist si3052 chip drivers/serial/bfin_5xx.c: Fix line continuation defects tty: prevent DOS in the flush_to_ldisc 8250: add support for Kouwell KW-L221N-2 nozomi: Fix warning from the previous TIOCGCOUNT changes tty: fix warning in synclink driver tty: Fix formatting in tty.h tty: the development tree is now done in git
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 12:19:34 +0300