summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-22/+2
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-06-04Merge branch 'hch.procfs' of ↵Linus Torvalds3-228/+48
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-06-04Merge tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-blockLinus Torvalds16-60/+45
Pull block updates from Jens Axboe: - clean up how we pass around gfp_t and blk_mq_req_flags_t (Christoph) - prepare us to defer scheduler attach (Christoph) - clean up drivers handling of bounce buffers (Christoph) - fix timeout handling corner cases (Christoph/Bart/Keith) - bcache fixes (Coly) - prep work for bcachefs and some block layer optimizations (Kent). - convert users of bio_sets to using embedded structs (Kent). - fixes for the BFQ io scheduler (Paolo/Davide/Filippo) - lightnvm fixes and improvements (Matias, with contributions from Hans and Javier) - adding discard throttling to blk-wbt (me) - sbitmap blk-mq-tag handling (me/Omar/Ming). - remove the sparc jsflash block driver, acked by DaveM. - Kyber scheduler improvement from Jianchao, making it more friendly wrt merging. - conversion of symbolic proc permissions to octal, from Joe Perches. Previously the block parts were a mix of both. - nbd fixes (Josef and Kevin Vigor) - unify how we handle the various kinds of timestamps that the block core and utility code uses (Omar) - three NVMe pull requests from Keith and Christoph, bringing AEN to feature completeness, file backed namespaces, cq/sq lock split, and various fixes - various little fixes and improvements all over the map * tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block: (196 commits) blk-mq: update nr_requests when switching to 'none' scheduler block: don't use blocking queue entered for recursive bio submits dm-crypt: fix warning in shutdown path lightnvm: pblk: take bitmap alloc. out of critical section lightnvm: pblk: kick writer on new flush points lightnvm: pblk: only try to recover lines with written smeta lightnvm: pblk: remove unnecessary bio_get/put lightnvm: pblk: add possibility to set write buffer size manually lightnvm: fix partial read error path lightnvm: proper error handling for pblk_bio_add_pages lightnvm: pblk: fix smeta write error path lightnvm: pblk: garbage collect lines with failed writes lightnvm: pblk: rework write error recovery path lightnvm: pblk: remove dead function lightnvm: pass flag on graceful teardown to targets lightnvm: pblk: check for chunk size before allocating it lightnvm: pblk: remove unnecessary argument lightnvm: pblk: remove unnecessary indirection lightnvm: pblk: return NVM_ error on failed submission lightnvm: pblk: warn in case of corrupted write buffer ...
2018-06-03Merge tag 'scsi-fixes' of ↵Linus Torvalds1-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "Eve of merge window fix: The original code was so bogus as to be casting the wrong generic device to an rport and proceeding to take actions based on the bogus values it found. Fortunately it seems the location that is dereferenced always exists, so the code hasn't oopsed yet, but it certainly annoys the memory checkers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_transport_srp: Fix shost to rport translation
2018-05-29block: remove parent device reference from struct bsg_class_deviceChristoph Hellwig3-18/+10
Bsg holding a reference to the parent device may result in a crash if a bsg file handle is closed after the parent device driver has unloaded. Holding a reference is not really needed: the parent device must exist between bsg_register_queue and bsg_unregister_queue. Before the device goes away the caller does blk_cleanup_queue so that all in-flight requests to the device are gone and all new requests cannot pass beyond the queue. The queue itself is a refcounted object and it will stay alive with a bsg file. Based on analysis, previous patch and changelog from Anatoliy Glagolev. Reported-by: Anatoliy Glagolev <glagolig@gmail.com> Reviewed-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29libiscsi: don't try to bypass SCSI EHChristoph Hellwig1-2/+2
libiscsi is the only SCSI code that return BLK_EH_HANDLED, thus trying to bypass the normal SCSI EH code. We are going to remove this return value at the block layer, and at least from a quick look it doesn't look too harmful to try to send an abort for these cases, especially as the first one should not actually be possible. If this doesn't work out iscsi will probably need its own eh_strategy_handler instead to just do the right thing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29scsi_transport_fc: complete requests from ->timeoutChristoph Hellwig1-4/+3
By completing the request entirely in the driver we can remove the BLK_EH_HANDLED return value and thus the split responsibility between the driver and the block layer that has been causing trouble. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONEChristoph Hellwig9-14/+14
The BLK_EH_NOT_HANDLED implies nothing happen, but very often that is not what is happening - instead the driver already completed the command. Fix the symbolic name to reflect that a little better. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29scsi: scsi_transport_srp: Fix shost to rport translationBart Van Assche1-2/+20
Since an SRP remote port is attached as a child to shost->shost_gendev and as the only child, the translation from the shost pointer into an rport pointer must happen by looking up the shost child that is an rport. This patch fixes the following KASAN complaint: BUG: KASAN: slab-out-of-bounds in srp_timed_out+0x57/0x110 [scsi_transport_srp] Read of size 4 at addr ffff880035d3fcc0 by task kworker/1:0H/19 CPU: 1 PID: 19 Comm: kworker/1:0H Not tainted 4.16.0-rc3-dbg+ #1 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 srp_timed_out+0x57/0x110 [scsi_transport_srp] scsi_times_out+0xc7/0x3f0 [scsi_mod] blk_mq_terminate_expired+0xc2/0x140 bt_iter+0xbc/0xd0 blk_mq_queue_tag_busy_iter+0x1c7/0x350 blk_mq_timeout_work+0x325/0x3f0 process_one_work+0x441/0xa50 worker_thread+0x76/0x6c0 kthread+0x1b2/0x1d0 ret_from_fork+0x24/0x30 Fixes: e68ca75200fe ("scsi_transport_srp: Reduce failover time") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-24Merge tag 'for-linus-20180524' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+8
Pull block fixes from Jens Axboe: "Two fixes that should go into this release: - a loop writeback error clearing fix from Jeff - the sr sense fix from myself" * tag 'for-linus-20180524' of git://git.kernel.dk/linux-block: loop: clear wb_err in bd_inode when detaching backing file sr: pass down correctly sized SCSI sense buffer
2018-05-21sr: pass down correctly sized SCSI sense bufferJens Axboe1-2/+8
We're casting the CDROM layer request_sense to the SCSI sense buffer, but the former is 64 bytes and the latter is 96 bytes. As we generally allocate these on the stack, we end up blowing up the stack. Fix this by wrapping the scsi_execute() call with a properly sized sense buffer, and copying back the bits for the CDROM layer. Cc: stable@vger.kernel.org Reported-by: Piotr Gabriel Kosinski <pg.kosinski@gmail.com> Reported-by: Daniel Shapira <daniel@twistlock.com> Tested-by: Kees Cook <keescook@chromium.org> Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-18scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()Alexander Potapenko1-1/+1
This shall help avoid copying uninitialized memory to the userspace when calling ioctl(fd, SG_IO) with an empty command. Reported-by: syzbot+7d26fc1eea198488deab@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-16sg: simplify procfs codeChristoph Hellwig1-112/+12
Use remove_proc_subtree to remove the whole subtree on cleanup, and unwind the registration loop into individual calls. Switch to use proc_create_seq where applicable. Also don't bother handling proc_create* failures - the driver works perfectly fine without the proc files, and the cleanup will handle missing files gracefully. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16megaraid: simplify procfs codeChristoph Hellwig2-116/+36
Use remove_proc_subtree to remove the whole subtree on cleanup, and unwind the registration loop into individual calls. Switch to use proc_create_single. Also don't bother handling proc_create* failures - the driver works perfectly fine without the proc files, and the cleanup will handle missing files gracefully. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-15scsi: core: clean up generated file scsi_devinfo_tbl.cRandy Dunlap1-1/+1
"make clean" should remove the generated file "scsi_devinfo_tbl.c", so list it in the clean-files variable so that the file gets cleaned up. Fixes: 345e29608b4b ("scsi: scsi: Export blacklist flags to sysfs") Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-14block: consistently use GFP_NOIO instead of __GFP_NORECLAIMChristoph Hellwig1-1/+1
Same numerical value (for now at least), but a much better documentation of intent. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14block: pass an explicit gfp_t to get_requestChristoph Hellwig1-4/+0
blk_old_get_request already has it at hand, and in blk_queue_bio, which is the fast path, it is constant. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14block: sanitize blk_get_request calling conventionsChristoph Hellwig6-6/+6
Switch everyone to blk_get_request_flags, and then rename blk_get_request_flags to blk_get_request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14scsi/osd: remove the gfp argument to osd_start_requestChristoph Hellwig1-13/+11
Always GFP_KERNEL, and keeping it would cause serious complications for the next change. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-07scsi: reduce use of block bounce buffersChristoph Hellwig1-22/+2
We can rely on the dma-mapping code to handle any DMA limits that is bigger than the ISA DMA mask for us (either using an iommu or swiotlb), so remove setting the block layer bounce limit for anything but the unchecked_isa_dma case, or the bouncing for highmem pages. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk>
2018-05-02scsi: aacraid: Correct hba_send to include iu_typeDave Carroll1-4/+4
commit b60710ec7d7a ("scsi: aacraid: enable sending of TMFs from aac_hba_send()") allows aac_hba_send() to send scsi commands, and TMF requests, but the existing code only updates the iu_type for scsi commands. For TMF requests we are sending an unknown iu_type to firmware, which causes a fault. Include iu_type prior to determining the validity of the command Reported-by: Noah Misner <nmisner@us.ibm.com> Fixes: b60710ec7d7ab ("aacraid: enable sending of TMFs from aac_hba_send()") Fixes: 423400e64d377 ("aacraid: Include HBA direct interface") Tested-by: Noah Misner <nmisner@us.ibm.com> cc: stable@vger.kernel.org Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-02scsi: vmw-pvscsi: return DID_BUS_BUSY for adapter-initated abortsJim Gill1-1/+1
The vmw_pvscsi driver returns DID_ABORT for commands aborted internally by the adapter, leading to the filesystem going read-only. Change the result to DID_BUS_BUSY, causing the kernel to retry the command. Signed-off-by: Jim Gill <jgill@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-21scsi: isci: Fix infinite loop in while loopColin Ian King1-2/+1
In the case when the phy_mask is bitwise anded with the phy_index bit is zero the continue statement currently jumps to the next iteration of the while loop and phy_index is never actually incremented, potentially causing an infinite loop if phy_index is less than SCI_MAX_PHS. Fix this by turning the while loop into a for loop. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20scsi: storvsc: Set up correct queue depth values for IDE devicesLong Li1-2/+5
Unlike SCSI and FC, we don't use multiple channels for IDE. Also fix the calculation for sub-channels. Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: sd_zbc: Avoid that resetting a zone fails sporadicallyBart Van Assche1-58/+82
Since SCSI scanning occurs asynchronously, since sd_revalidate_disk() is called from sd_probe_async() and since sd_revalidate_disk() calls sd_zbc_read_zones() it can happen that sd_zbc_read_zones() is called concurrently with blkdev_report_zones() and/or blkdev_reset_zones(). That can cause these functions to fail with -EIO because sd_zbc_read_zones() e.g. sets q->nr_zones to zero before restoring it to the actual value, even if no drive characteristics have changed. Avoid that this can happen by making the following changes: - Protect the code that updates zone information with blk_queue_enter() and blk_queue_exit(). - Modify sd_zbc_setup_seq_zones_bitmap() and sd_zbc_setup() such that these functions do not modify struct scsi_disk before all zone information has been obtained. Note: since commit 055f6e18e08f ("block: Make q_usage_counter also track legacy requests"; kernel v4.15) the request queue freezing mechanism also affects legacy request queues. Fixes: 89d947561077 ("sd: Implement support for ZBC devices") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: stable@vger.kernel.org # v4.16 Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: sd: Defer spinning up drive while SANITIZE is in progressMahesh Rajashekhara1-0/+2
A drive being sanitized will return NOT READY / ASC 0x4 / ASCQ 0x1b ("LOGICAL UNIT NOT READY. SANITIZE IN PROGRESS"). Prevent spinning up the drive until this condition clears. [mkp: tweaked commit message] Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: megaraid_sas: Do not log an error if FW successfully initializes.Vinson Lee1-3/+3
Fixes: 2d2c2331673c ("scsi: megaraid_sas: modified few prints in OCR and IOC INIT path") Signed-off-by: Vinson Lee <vlee@freedesktop.org> Acked-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: ufs: add trace event for ufs upiuOhad Sharabi1-0/+40
Add UFS Protocol Information Units(upiu) trace events for ufs driver, used to trace various ufs transaction types- command, task-management and device management. The trace-point format is generic and can be easily adapted to trace other upius if needed. Currently tracing ufs transaction of type 'device management', which this patch introduce, cannot be obtained from any other trace. Device management transactions are used for communication with the device such as reading and writing descriptor or attributes etc. Signed-off-by: Ohad Sharabi <ohad.sharabi@sandisk.com> Reviewed-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: fnic: fix spelling mistake in fnic stats "Abord" -> "Abort"Colin Ian King1-1/+1
Trivial fix to spelling mistake in fnic stats message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: scsi_debug: IMMED related delay adjustmentsDouglas Gilbert1-9/+24
A patch titled: "[PATCH v2] scsi_debug: implement IMMED bit" introduced long delays to the Start stop unit (SSU) and Synchronize cache (SC) commands when the IMMED bit is clear. This patch makes those delays more realistic. It causes SSU to only delay when the start stop state is changed; SC only delays when there's been a write since the previous SC. It also reduced the SC delay from 1 second to 50 milliseconds. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reported-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-19scsi: iscsi: respond to netlink with unicast when appropriateChris Leech1-11/+18
Instead of always multicasting responses, send a unicast netlink message directed at the correct pid. This will be needed if we ever want to support multiple userspace processes interacting with the kernel over iSCSI netlink simultaneously. Limitations can currently be seen if you attempt to run multiple iscsistart commands in parallel. We've fixed up the userspace issues in iscsistart that prevented multiple instances from running, so now attempts to speed up booting by bringing up multiple iscsi sessions at once in the initramfs are just running into misrouted responses that this fixes. Signed-off-by: Chris Leech <cleech@redhat.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-16Merge tag 'scsi-fixes' of ↵Linus Torvalds18-82/+109
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of minor (and safe changes) that didn't make the initial pull request plus some bug fixes. The status handling code is actually a running regression from the previous merge window which had an incomplete fix (now reverted) and most of the remaining bug fixes are for problems older than the current merge window" [ Side note: this merge also takes the base kernel git repository to 6+ million objects for the first time. Technically we hit it a couple of merges ago already if you count all the tag objects, but now it reaches 6M+ objects reachable from HEAD. I was joking around that that's when I should switch to 5.0, because 3.0 happened at the 2M mark, and 4.0 happened at 4M objects. But probably not, even if numerology is about as good a reason as any. - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: devinfo: Add Microsoft iSCSI target to 1024 sector blacklist scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler() scsi: dpt_i2o: Use after free in I2ORESETCMD ioctl scsi: core: Make scsi_result_to_blk_status() recognize CONDITION MET scsi: core: Rename __scsi_error_from_host_byte() into scsi_result_to_blk_status() Revert "scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()" scsi: aacraid: Insure command thread is not recursively stopped scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION scsi: qla2xxx: correctly shift host byte scsi: qla2xxx: Fix race condition between iocb timeout and initialisation scsi: qla2xxx: Avoid double completion of abort command scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure scsi: scsi_dh: Don't look for NULL devices handlers by name scsi: core: remove redundant assignment to shost->use_blk_mq
2018-04-11sr: get/drop reference to device in revalidate and check_eventsJens Axboe1-4/+15
We can't just use scsi_cd() to get the scsi_cd structure, we have to grab a live reference to the device. For both callbacks, we're not inside an open where we already hold a reference to the device. This fixes device removal/addition under concurrent device access, which otherwise could result in the below oops. NULL pointer dereference at 0000000000000010 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: sr 12:0:0:0: [sr2] scsi-1 drive scsi_debug crc_t10dif crct10dif_generic crct10dif_common nvme nvme_core sb_edac xl sr 12:0:0:0: Attached scsi CD-ROM sr2 sr_mod cdrom btrfs xor zstd_decompress zstd_compress xxhash lzo_compress zlib_defc sr 12:0:0:0: Attached scsi generic sg7 type 5 igb ahci libahci i2c_algo_bit libata dca [last unloaded: crc_t10dif] CPU: 43 PID: 4629 Comm: systemd-udevd Not tainted 4.16.0+ #650 Hardware name: Dell Inc. PowerEdge T630/0NT78X, BIOS 2.3.4 11/09/2016 RIP: 0010:sr_block_revalidate_disk+0x23/0x190 [sr_mod] RSP: 0018:ffff883ff357bb58 EFLAGS: 00010292 RAX: ffffffffa00b07d0 RBX: ffff883ff3058000 RCX: ffff883ff357bb66 RDX: 0000000000000003 RSI: 0000000000007530 RDI: ffff881fea631000 RBP: 0000000000000000 R08: ffff881fe4d38400 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000001b6 R12: 000000000800005d R13: 000000000800005d R14: ffff883ffd9b3790 R15: 0000000000000000 FS: 00007f7dc8e6d8c0(0000) GS:ffff883fff340000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000003ffda98005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __invalidate_device+0x48/0x60 check_disk_change+0x4c/0x60 sr_block_open+0x16/0xd0 [sr_mod] __blkdev_get+0xb9/0x450 ? iget5_locked+0x1c0/0x1e0 blkdev_get+0x11e/0x320 ? bdget+0x11d/0x150 ? _raw_spin_unlock+0xa/0x20 ? bd_acquire+0xc0/0xc0 do_dentry_open+0x1b0/0x320 ? inode_permission+0x24/0xc0 path_openat+0x4e6/0x1420 ? cpumask_any_but+0x1f/0x40 ? flush_tlb_mm_range+0xa0/0x120 do_filp_open+0x8c/0xf0 ? __seccomp_filter+0x28/0x230 ? _raw_spin_unlock+0xa/0x20 ? __handle_mm_fault+0x7d6/0x9b0 ? list_lru_add+0xa8/0xc0 ? _raw_spin_unlock+0xa/0x20 ? __alloc_fd+0xaf/0x160 ? do_sys_open+0x1a6/0x230 do_sys_open+0x1a6/0x230 do_syscall_64+0x5a/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-10scsi: devinfo: Add Microsoft iSCSI target to 1024 sector blacklistRoss Lagerwall1-1/+1
The Windows Server 2016 iSCSI target doesn't work with the Linux kernel initiator since the kernel started sending larger requests by default, nor does it implement the block limits VPD page. Apply the sector limit workaround for these targets. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: KY Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler()Dan Carpenter1-4/+4
Smatch marks skb->data as untrusted so it complains that there is a potential overflow here: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:2111 t4_uld_rx_handler() error: buffer overflow 'cxgb4i_cplhandlers' 239 <= 255. In this case, skb->data comes from the hardware or firmware so it's not going to overflow unless there is a firmware bug. [mkp: fixed braces] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: dpt_i2o: Use after free in I2ORESETCMD ioctlDan Carpenter1-5/+8
Here is another use after free if we reset the card. The adpt_hba_reset() function frees "pHba" on error. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: core: Make scsi_result_to_blk_status() recognize CONDITION METBart Van Assche1-0/+9
Ensure that CONDITION MET and other non-zero status values that indicate success are translated into BLK_STS_OK. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Lee Duncan <lduncan@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: core: Rename __scsi_error_from_host_byte() into ↵Bart Van Assche1-9/+9
scsi_result_to_blk_status() Since the next patch will modify this function such that it checks more than just the host byte of the SCSI result, rename __scsi_error_from_host_byte() into scsi_result_to_blk_status(). This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Lee Duncan <lduncan@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10Revert "scsi: core: return BLK_STS_OK for DID_OK in ↵Bart Van Assche1-2/+0
__scsi_error_from_host_byte()" The description of commit e39a97353e53 is wrong: it mentions that commit 2a842acab109 introduced a bug in __scsi_error_from_host_byte() although that commit did not change the behavior of that function. Additionally, commit e39a97353e53 introduced a bug: it causes commands that fail with hostbyte=DID_OK and driverbyte=DRIVER_SENSE to be completed with BLK_STS_OK. Hence revert that commit. Fixes: e39a97353e53 ("scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()") Reported-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Lee Duncan <lduncan@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: aacraid: Insure command thread is not recursively stoppedDave Carroll2-1/+4
If a recursive IOP_RESET is invoked, usually due to the eh_thread handling errors after the first reset, be sure we flag that the command thread has been stopped to avoid an Oops of the form; [ 336.620256] CPU: 28 PID: 1193 Comm: scsi_eh_0 Kdump: loaded Not tainted 4.14.0-49.el7a.ppc64le #1 [ 336.620297] task: c000003fd630b800 task.stack: c000003fd61a4000 [ 336.620326] NIP: c000000000176794 LR: c00000000013038c CTR: c00000000024bc10 [ 336.620361] REGS: c000003fd61a7720 TRAP: 0300 Not tainted (4.14.0-49.el7a.ppc64le) [ 336.620395] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 22084022 XER: 20040000 [ 336.620435] CFAR: c000000000130388 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1 [ 336.620435] GPR00: c00000000013038c c000003fd61a79a0 c0000000014c7e00 0000000000000000 [ 336.620435] GPR04: 000000000000000c 000000000000000c 9000000000009033 0000000000000477 [ 336.620435] GPR08: 0000000000000477 0000000000000000 0000000000000000 c008000010f7d940 [ 336.620435] GPR12: c00000000024bc10 c000000007a33400 c0000000001708a8 c000003fe3b881d8 [ 336.620435] GPR16: c000003fe3b88060 c000003fd61a7d10 fffffffffffff000 000000000000001e [ 336.620435] GPR20: 0000000000000001 c000000000ebf1a0 0000000000000001 c000003fe3b88000 [ 336.620435] GPR24: 0000000000000003 0000000000000002 c000003fe3b88840 c000003fe3b887e8 [ 336.620435] GPR28: c000003fe3b88000 c000003fc8181788 0000000000000000 c000003fc8181700 [ 336.620750] NIP [c000000000176794] exit_creds+0x34/0x160 [ 336.620775] LR [c00000000013038c] __put_task_struct+0x8c/0x1f0 [ 336.620804] Call Trace: [ 336.620817] [c000003fd61a79a0] [c000003fe3b88000] 0xc000003fe3b88000 (unreliable) [ 336.620853] [c000003fd61a79d0] [c00000000013038c] __put_task_struct+0x8c/0x1f0 [ 336.620889] [c000003fd61a7a00] [c000000000171418] kthread_stop+0x1e8/0x1f0 [ 336.620922] [c000003fd61a7a40] [c008000010f7448c] aac_reset_adapter+0x14c/0x8d0 [aacraid] [ 336.620959] [c000003fd61a7b00] [c008000010f60174] aac_eh_host_reset+0x84/0x100 [aacraid] [ 336.621010] [c000003fd61a7b30] [c000000000864f24] scsi_try_host_reset+0x74/0x180 [ 336.621046] [c000003fd61a7bb0] [c000000000867ac0] scsi_eh_ready_devs+0xc00/0x14d0 [ 336.625165] [c000003fd61a7ca0] [c0000000008699e0] scsi_error_handler+0x550/0x730 [ 336.632101] [c000003fd61a7dc0] [c000000000170a08] kthread+0x168/0x1b0 [ 336.639031] [c000003fd61a7e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4 [ 336.645971] Instruction dump: [ 336.648743] 384216a0 7c0802a6 fbe1fff8 f8010010 f821ffd1 7c7f1b78 60000000 60000000 [ 336.657056] 39400000 e87f0838 f95f0838 7c0004ac <7d401828> 314affff 7d40192d 40c2fff4 [ 336.663997] -[ end trace 4640cf8d4945ad95 ]- So flag when the thread is stopped by setting the thread pointer to NULL. Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITIONJohannes Thumshirn1-3/+3
Bart reports that in qla_isr.c's qla2x00_handle_dif_error we're wrongly shifting the SAM_STAT_CHECK_CONDITION by one instead of directly ORing it onto the SCSI command's result. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: qla2xxx: correctly shift host byteJohannes Thumshirn1-1/+1
The SCSI host byte has to be shifted by 16 not 6. As Bart pointed out this patch does not change any functionality because DID_OK == 0, but a wrong shift is irritating for the reviewer. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: qla2xxx: Fix race condition between iocb timeout and initialisationBen Hutchings8-31/+45
qla2x00_init_timer() calls add_timer() on the iocb timeout timer, which means the timeout function pointer and any data that the function depends on must be initialised beforehand. Move this initialisation before each call to qla2x00_init_timer(). In some cases qla2x00_init_timer() initialises a completion structure needed by the timeout function, so move the call to add_timer() after that. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: qla2xxx: Avoid double completion of abort commandBen Hutchings1-2/+2
qla2x00_tmf_sp_done() now deletes the timer that will run qla2x00_tmf_iocb_timeout(), but doesn't check whether the timer already expired. Check the return value from del_timer() to avoid calling complete() a second time. Fixes: 4440e46d5db7 ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous ...") Fixes: 1514839b3664 ("scsi: qla2xxx: Fix NULL pointer crash due to active ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-09scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failureBill Kuzeja1-23/+21
The code that fixes the crashes in the following commit introduced a small memory leak: commit 6a2cf8d3663e ("scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure") Fixing this requires a bit of reworking, which I've explained. Also provide some code cleanup. There is a small window in qla2x00_probe_one where if qla2x00_alloc_queues fails, we end up never freeing req and rsp and leak 0xc0 and 0xc8 bytes respectively (the sizes of req and rsp). I originally put in checks to test for this condition which were based on the incorrect assumption that if ha->rsp_q_map and ha->req_q_map were allocated, then rsp and req were allocated as well. This is incorrect. There is a window between these allocations: ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); goto probe_hw_failed; [if successful, both rsp and req allocated] base_vha = qla2x00_create_host(sht, ha); goto probe_hw_failed; ret = qla2x00_request_irqs(ha, rsp); goto probe_failed; if (qla2x00_alloc_queues(ha, req, rsp)) { goto probe_failed; [if successful, now ha->rsp_q_map and ha->req_q_map allocated] To simplify this, we should just set req and rsp to NULL after we free them. Sounds simple enough? The problem is that req and rsp are pointers defined in the qla2x00_probe_one and they are not always passed by reference to the routines that free them. Here are paths which can free req and rsp: PATH 1: qla2x00_probe_one ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); [req and rsp are passed by reference, but if this fails, we currently do not NULL out req and rsp. Easily fixed] PATH 2: qla2x00_probe_one failing in qla2x00_request_irqs or qla2x00_alloc_queues probe_failed: qla2x00_free_device(base_vha); qla2x00_free_req_que(ha, req) qla2x00_free_rsp_que(ha, rsp) PATH 3: qla2x00_probe_one: failing in qla2x00_mem_alloc or qla2x00_create_host probe_hw_failed: qla2x00_free_req_que(ha, req) qla2x00_free_rsp_que(ha, rsp) PATH 1: This should currently work, but it doesn't because rsp and rsp are not set to NULL in qla2x00_mem_alloc. Easily remedied. PATH 2: req and rsp aren't passed in at all to qla2x00_free_device but are derived from ha->req_q_map[0] and ha->rsp_q_map[0]. These are only set up if qla2x00_alloc_queues succeeds. In qla2x00_free_queues, we are protected from crashing if these don't exist because req_qid_map and rsp_qid_map are only set on their allocation. We are guarded in this way: for (cnt = 0; cnt < ha->max_req_queues; cnt++) { if (!test_bit(cnt, ha->req_qid_map)) continue; PATH 3: This works. We haven't freed req or rsp yet (or they were never allocated if qla2x00_mem_alloc failed), so we'll attempt to free them here. To summarize, there are a few small changes to make this work correctly and (and for some cleanup): 1) (For PATH 1) Set *rsp and *req to NULL in case of failure in qla2x00_mem_alloc so these are correctly set to NULL back in qla2x00_probe_one 2) After jumping to probe_failed: and calling qla2x00_free_device, explicitly set rsp and req to NULL so further calls with these pointers do not crash, i.e. the free queue calls in the probe_hw_failed section we fall through to. 3) Fix return code check in the call to qla2x00_alloc_queues. We currently drop the return code on the floor. The probe fails but the caller of the probe doesn't have an error code, so it attaches to pci. This can result in a crash on module shutdown. 4) Remove unnecessary NULL checks in qla2x00_free_req_que, qla2x00_free_rsp_que, and the egregious NULL checks before kfrees and vfrees in qla2x00_mem_free. I tested this out running a scenario where the card breaks at various times during initialization. I made sure I forced every error exit path in qla2x00_probe_one. Cc: <stable@vger.kernel.org> # v4.16 Fixes: 6a2cf8d3663e ("scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure") Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-09scsi: scsi_dh: Don't look for NULL devices handlers by nameJohannes Thumshirn1-0/+3
Currently scsi_dh_lookup() doesn't check for NULL as a device name. This combined with nvme over dm-mpath results in the following messages emitted by device-mapper: device-mapper: multipath: Could not failover device 259:67: Handler scsi_dh_(null) error 14. Let scsi_dh_lookup() fail fast on NULL names. [mkp: typo fix] Cc: <stable@vger.kernel.org> # v4.16 Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-09scsi: core: remove redundant assignment to shost->use_blk_mqColin Ian King1-1/+0
The first assignment to shost->use_blk_mq is redundant as it is overwritten by the following statement. Remove this redundant code. Detected by CoverityScan, CID#1466993 ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-06Merge tag 'scsi-for-linus' of ↵Linus Torvalds154-10408/+5293
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc, ufs, mpt3sas, hisi_sas. In addition we have removed several really old drivers: sym53c416, NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c initialization from all remaining drivers. Plus an assortment of bug fixes, initialization errors and other minor fixes" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits) scsi: ufs: Add support for Auto-Hibernate Idle Timer scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries scsi: qla2xxx: fx00 copypaste typo scsi: qla2xxx: fix error message on <qla2400 scsi: smartpqi: update driver version scsi: smartpqi: workaround fw bug for oq deletion scsi: arcmsr: Change driver version to v1.40.00.05-20180309 scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection. scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug scsi: qla2xxx: Update driver version to 10.00.00.06-k scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY scsi: qla2xxx: Remove nvme_done_list scsi: qla2xxx: Return busy if rport going away scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change scsi: qla2xxx: Add FC-NVMe abort processing scsi: qla2xxx: Add changes for devloss timeout in driver ...
2018-04-06Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-blockLinus Torvalds13-21/+18
Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...
2018-04-05Merge branch 'for-linus' of ↵Linus Torvalds4-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: kfifo: fix inaccurate comment tools/thermal: tmon: fix for segfault net: Spelling s/stucture/structure/ edd: don't spam log if no EDD information is present Documentation: Fix early-microcode.txt references after file rename tracing: Block comments should align the * on each line treewide: Fix typos in printk GenWQE: Fix a typo in two comments treewide: Align function definition open/close braces
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 00:42:11 +0300