summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_init.c
AgeCommit message (Collapse)AuthorFilesLines
2017-06-28scsi: qla2xxx: Preparation for Target MQ.Quinn Tran1-3/+8
In Current code, Req Q 0, RespQ 0 & hardware_lock are the main resources for sending and process completion of Target IO. These resources are now referenced behind a new qpair/"struct qla_qpair base_qpair". Main path IO handle will access those resources via the qpair pointer in preparation for Target MQ. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-13scsi: qla2xxx: Fix compile warningHimanshu Madhani1-2/+2
Fixes following 0-day kernel build warnings: drivers/scsi/qla2xxx/qla_init.c:6407:50: warning: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=] drivers/scsi/qla2xxx/qla_init.c:6709:50: warning: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=] Fixes: b95b9452aacf ("scsi: qla2xxx: Fix crash due to mismatch mumber of Q-pair creation for Multi queue") Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-13scsi: qla2xxx: Accelerate SCSI BUSY status generation in target modeQuinn Tran1-2/+11
Accelerate generation of SCSI busy to let initiators slow down when target is running low in resources. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-13scsi: qla2xxx: Add ql2xiniexchg parameterQuinn Tran1-1/+1
Previously, the ql2xexchoffld module parameter was used to control the max number of exchanges to be offload onto host memory. Module parameter ql_dm_tgt_ex_pct was used to control the percentage of exchanges allocated to the Target side. With this patch, module parameter ql_dm_tgt_ex_pct is no longer used to control exchanges for the driver. New module parameter ql2xiniexchg is added to control exchanges between target mode and initiator mode. With the updated module parameters, users can control the exact number of exchanges for either Initiator or Target. The exchange offload feature will be automatically enabled when the total number of exchanges exceeds 2048 limit. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-13scsi: qla2xxx: Turn on FW option for exchange checkQuinn Tran1-0/+18
Tell FW to track exchange/cmd state to prevent driver from using stale exchange or exchange that is not meant for this command. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-13scsi: qla2xxx: Cleanup debug message IDsQuinn Tran1-145/+145
Assign unique id to all traces and logs for debug purpose. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-13scsi: qla2xxx: Fix name server reloginQuinn Tran1-1/+37
Name server login is normally handle by FW. In some rare case where one of the switches is being updated, name server login could get affected. Trigger relogin to name server when driver detects this condition. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-13scsi: qla2xxx: Retain loop test for fwdump length exceeding buffer lengthJoe Carnuccio1-4/+4
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-13scsi: qla2xxx: Allow ABTS, PURX, RIDA on ATIOQ for ISP83XX/27XXQuinn Tran1-2/+5
Driver added mechanism to move ABTS/PUREX/RIDA mailbox to ATIO queue as part of commit id 41dc529a4602ac737020f423f84686a81de38e6d ("qla2xxx: Improve RSCN handling in driver"). This patch adds a check to only allow ABTS/PURX/RIDA to be moved to ATIO Queue for ISP83XX and ISP27XX. Cc: <stable@vger.kernel.org> # 4.11 Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-25scsi: qla2xxx: Fix crash due to mismatch mumber of Q-pair creation for Multi ↵Sawan Chandak1-1/+4
queue when driver is loaded with Multi Queue enabled, it was noticed that there was one less queue pair created. Following message would indicate this: "No resources to create additional q pair." The result of one less queue pair means that system can crash, if the block mq layer thinks there is an extra hardware queue available, and the driver will use a NULL ptr qpair in that instance. Following stack trace is seen in one of the crash: irq_create_affinity_masks+0x98/0x530 irq_create_affinity_masks+0x98/0x530 __pci_enable_msix+0x321/0x4e0 mutex_lock+0x12/0x40 pci_alloc_irq_vectors_affinity+0xb5/0x140 qla24xx_enable_msix+0x79/0x530 [qla2xxx] qla2x00_request_irqs+0x61/0x2d0 [qla2xxx] qla2x00_probe_one+0xc73/0x2390 [qla2xxx] ida_simple_get+0x98/0x100 kernfs_next_descendant_post+0x40/0x50 local_pci_probe+0x45/0xa0 pci_device_probe+0xfc/0x140 driver_probe_device+0x2c5/0x470 __driver_attach+0xdd/0xe0 driver_probe_device+0x470/0x470 bus_for_each_dev+0x6c/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x45/0x270 driver_register+0x60/0xe0 __pci_register_driver+0x4c/0x50 qla2x00_module_init+0x1ce/0x21e [qla2xxx] Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-1/+1
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the usual amount of cosmetic and spelling stuff" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits) scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template" scsi: stex: make S6flag static scsi: mac_esp: fix to pass correct device identity to free_irq() scsi: aacraid: pci_alloc_consistent() failures on ARM64 scsi: ufs: make ufshcd_get_lists_status() register operation obvious scsi: ufs: use MASK_EE_STATUS scsi: mac_esp: Replace bogus memory barrier with spinlock scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static scsi: sd_zbc: Do not write lock zones for reset scsi: sd_zbc: Remove superfluous assignments scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd scsi: Improve scsi_get_sense_info_fld scsi: sd: Cleanup sd_done sense data handling scsi: sd: Improve sd_completed_bytes scsi: sd: Fix function descriptions scsi: mpt3sas: remove redundant wmb scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host() scsi: sg: reset 'res_in_use' after unlinking reserved array scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency" ...
2017-04-05scsi: qla2xxx: Fix typo in driverMilan P Gandhi1-1/+1
Signed-off-by: Milan P Gandhi <mgandhi@redhat.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-19qla2xxx: Fix delayed response to command for loop mode/direct connect.Quinn Tran1-0/+12
Current driver wait for FW to be in the ready state before processing in-coming commands. For Arbitrated Loop or Point-to- Point (not switch), FW Ready state can take a while. FW will transition to ready state after all Nports have been logged in. In the mean time, certain initiators have completed the login and starts IO. Driver needs to start processing all queues if FW is already started. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Change scsi host lookup method.Quinn Tran1-8/+6
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Use IOCB interface to submit non-critical MBX.Quinn Tran1-44/+2
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Allow relogin to proceed if remote login did not finishQuinn Tran1-2/+10
If the remote port have started the login process, then the PLOGI and PRLI should be back to back. Driver will allow the remote port to complete the process. For the case where the remote port decide to back off from sending PRLI, this local port sets an expiration timer for the PRLI. Once the expiration time passes, the relogin retry logic is allowed to go through and perform login with the remote port. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-19qla2xxx: Allow vref count to timeout on vport delete.Joe Carnuccio1-0/+1
Cc: <stable@vger.kernel.org> Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-03Merge branch 'for-next' of ↵Linus Torvalds1-391/+1205
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - enable dual mode (initiator + target) qla2xxx operation. (Quinn + Himanshu) - add a framework for qla2xxx async fabric discovery. (Quinn + Himanshu) - enable iscsi PDU DDP completion offload in cxgbit/T6 NICs. (Varun) - fix target-core handling of aborted failed commands. (Bart) - fix a long standing target-core issue NULL pointer dereference with active I/O LUN shutdown. (Rob Millner + Bryant + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits) target: Add counters for ABORT_TASK success + failure iscsi-target: Fix early login failure statistics misses target: Fix NULL dereference during LUN lookup + active I/O shutdown target: Delete tmr from list before processing target: Fix handling of aborted failed commands uapi: fix linux/target_core_user.h userspace compilation errors target: export protocol identifier qla2xxx: Fix a warning reported by the "smatch" static checker target/iscsi: Fix unsolicited data seq_end_offset calculation target/cxgbit: add T6 iSCSI DDP completion feature target/cxgbit: Enable DDP for T6 only if data sequence and pdu are in order target/cxgbit: Use T6 specific macros to get ETH/IP hdr len target/cxgbit: use cxgb4_tp_smt_idx() to get smt idx target/iscsi: split iscsit_check_dataout_hdr() target: Remove command flag CMD_T_DEV_ACTIVE target: Remove command flag CMD_T_BUSY target: Move session check from target_put_sess_cmd() into target_release_cmd_kref() target: Inline transport_cmd_check_stop() target: Remove an overly chatty debug message target: Stop execution if CMD_T_STOP has been set ...
2017-02-28lib/vsprintf.c: remove %Z supportAlexey Dobriyan1-5/+5
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-19qla2xxx: Fix a warning reported by the "smatch" static checkerQuinn Tran1-1/+1
Fix the following warning reported by the "smatch" static checker: drivers/scsi/qla2xxx/qla_init.c:3910 qla2x00_alloc_fcport() warn: use 'flags' here instead of GFP_XXX? Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-02-09qla2xxx: Simplify usage of SRB structure in driverJoe Carnuccio1-51/+49
This patch simplifies SRB structure usage in driver. - Simplify sp->done() and sp->free() interfaces. - Remove sp->fcport->vha to use vha pointer from sp. - Use sp->vha context in qla2x00_rel_sp(). Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-02-09qla2xxx: Improve RSCN handling in driverQuinn Tran1-25/+125
Current code blindly does State Change Registration when the link is up. Move SCR behind fabric scan, so that arbitrated loop scan would not get erroneous error message. Some of the other improvements are as follows - Add session deletion for TPRLO and send acknowledgment for TPRLO. - Enable FW option to move ABTS, RIDA & PUREX from RSPQ to ATIOQ. - Save NPort ID early in link init. - Move ABTS & RIDA to ATIOQ helps in keeping command ordering and link up sequence ordering. - Save Nport ID and update VP map so that SCSI CMD/ATIO won't be dropped. - fcport alloc does the initializes memory to zero. Remove memset to zero since It might corrupt link list. - Turn off Registration for State Change MB in loop mode. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-02-09qla2xxx: Add Dual mode support in the driverQuinn Tran1-3/+3
Add switch to allow both Initiator Mode & Target mode to operate at the same time. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-02-09qla2xxx: Add framework for async fabric discoveryQuinn Tran1-334/+1062
Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-02-09qla2xxx: Track I-T nexus as single fc_port structQuinn Tran1-12/+0
Current code merges qla_tgt_sess and fc_port structure into single fc_port structure representing same I-T nexus. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling of patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-17qla2xxx: Reduce exess wait during chip resetQuinn Tran1-2/+2
Soft reset and Risc reset should take 100uS to complete. This change pad the timeout up to 400uS, which should be plenty. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2016-12-14scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.Quinn Tran1-1/+1
- Fix race condition between dpc_thread accessing Multiqueue resources and qla2x00_remove_one thread trying to free resource. - Fix out of order free for Multiqueue resources. Also, Multiqueue interrupts needs a workqueue. Interrupt needed to stop before the wq can be destroyed. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: qla2xxx: Add multiple queue pair functionality.Michael Hernandez1-9/+164
Replaced existing multiple queue functionality with framework that allows for the creation of pairs of request and response queues, either at start of day or dynamically. Queue pair creation depend on module parameter "ql2xmqsupport", which need to be enabled to create queue pair. Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Let DPORT be enabled purely by nvram.Joe Carnuccio1-6/+6
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Properly initialize IO statistics.Joe Carnuccio1-0/+3
Properly initialize IO statistics to avoid initial 0xFFFFFFF (-1) values. Cleanup/simplify usage of pointer to statistics structure. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Set FLOGI retry in additional firmware options for P2P (N2N) mode.Giridhar Malavali1-0/+24
When VP decoupling enabled, there could be a window where, FLOGI from initiators can be dropped before VP0 is enabled, causing link level recovery. Retry FLOGI to avoid link level recovery. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-24qla2xxx: Set relogin flag when we fail to queue login requests.Chad Dupuis1-1/+5
If we fail to queue an srb for an async login we should set the relogin flag so it will be retried as the reason for the queuing failure was most likely transient. Failure to do this can lead to failed paths as login is never retried if the relogin flag is not set. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-24qla2xxx: Avoid side effects when using endianizer macros.Joe Carnuccio1-8/+8
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-24qla2xxx: Add support for online flash update for ISP27XX.Sawan Chandak1-0/+91
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-24qla2xxx: Allow fw to hold status before sending ABTS response.Himanshu Madhani1-1/+10
Set bit 12 of additional firmware options 3 to let firmware hold status IOCB until ABTS response is received from Target. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-24qla2xxx: Seed init-cb login timeout from nvram exclusively.Joe Carnuccio1-3/+0
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-07qla2xxx: Fix stale pointer access.Quinn Tran1-5/+5
[ Upstream Commit 84e32a06f4f8756ce9ec3c8dc7e97896575f0771 ] Commit 84e32a0 ("qla2xxx: Use pci_enable_msix_range() instead of pci_enable_msix()") introduced a regression when target mode is enabled. In qla24xx_enable_msix(), ha->max_rsp_queues was incorrectly set to a value higher than the number of response queues allocated causing an invalid dereference. Specifically here in qla2x00_init_rings(): *rsp->in_ptr = 0; Add additional check to make sure the pointer is valid. following call stack will be seen ---- 8< ---- RIP: 0010:[<ffffffffa02ccadc>] [<ffffffffa02ccadc>] qla2x00_init_rings+0xdc/0x320 [qla2xxx] RSP: 0018:ffff880429447dd8 EFLAGS: 00010082 .... Call Trace: [<ffffffffa02ceb40>] qla2x00_abort_isp+0x170/0x6b0 [qla2xxx] [<ffffffffa02c6f77>] qla2x00_do_dpc+0x357/0x7f0 [qla2xxx] [<ffffffffa02c6c20>] ? qla2x00_relogin+0x260/0x260 [qla2xxx] [<ffffffff8107d2c9>] kthread+0xc9/0xe0 [<ffffffff8107d200>] ? flush_kthread_worker+0x90/0x90 [<ffffffff8172cc6f>] ret_from_fork+0x3f/0x70 [<ffffffff8107d200>] ? flush_kthread_worker+0x90/0x90 ---- 8< ---- Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-08qla2xxx: Check for online flag instead of active reset when transmitting ↵Dilip Kumar Uppugandla1-14/+20
responses Driver has following initialization sequence for Target mode 1. Driver initialization starts 2. ISP Abort is scheduled when the target is enabled. qla2xxx [0000:04:00.0]-4807:25: ISP abort scheduled qla2xxx [0000:04:00.0]-00af:25: Performing ISP error recovery - ha=ffff880caa9e0000. 3. DPC thread starts the ISP Abort 4. While DPC is resetting the chip and initializing the firmware, we get async events from the firmware about P2P mode, LOOP UP and PORT UPDATE. 5. PRLI from a initiator is delivered to us followed by a PLOGI and then a SCSI command which creates a session. 6. If the SCSI command is a WRITE in this case, we issue XFR RDY and it gets dropped as can be seen with messages RESET-XFR because ISP Abort is still active qla2xxx [0000:04:00.0]-e902:25: RESET-XFR active/old-count/new-count = 1/1/1. 7. If the SCSI command is a READ, we issue RESPONSE and they get dropped as well because Abort is still active. qla2xxx [0000:04:00.0]-e901:25: RESET-RSP active/old-count/new-count = 1/1/1 8. Now eventually, ISP Abort finishes clearing the DPC flags. qla2xxx [0000:04:00.0]-8822:25: qla2x00_abort_isp succeeded. qla2xxx [0000:04:00.0]-4808:25: ISP abort end. 9. Since we dropped SCSI commands silently (without any responses sent to the initiator) initiator waits for a SCSI timeout (which is 60 seconds in our case), Sends an ABTS which fails since there no se_cmd found for the tag that ABTS is referencing as the commands were cleaned up in Step 6 and 7. 10. Initiator send an IO after the ABTS which succeed fine. To fix the above case, the following changes have been made: - To prevent target from dropping commands silently, use the online flag instead to check for an active chip reset. Once the port is online during a chip reset phase, we are good to process the commands. - Clean up qla2x00_restart_isp to not set the online flag and process ATIO as it is unnecessary. During a chip reset, interrupts are enabled only after setting the online flag to 1, so ATIO's won't be missed and hence no need to process ATIO's after setting the online flag. Signed-off-by: Dilip Kumar Uppugandla <dilip@purestorage.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-08qla2xxx: Move atioq to a different lock to reduce lock contentionQuinn Tran1-2/+4
99% of the time the ATIOQ has SCSI command. The other 1% of time is something else. Most of the time this interrupt does not need to hold the hardware_lock. We're moving the ATIO interrupt thread to a different lock to reduce lock contention. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-08qla2xxx: Add FW resource count in DebugFS.Quinn Tran1-7/+5
DebugFS now will show fw_resource_count node. FW Resource count Original TGT exchg count[0] current TGT exchg count[0] original Initiator Exchange count[2048] Current Initiator Exchange count[2048] Original IOCB count[2078] Current IOCB count[2067] MAX VP count[254] MAX FCF count[0] Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-08qla2xxx: Enable Exchange offload support.Himanshu Madhani1-0/+7
This patch enables Exchange offload support in Qlogic ISP. To enable exchange offload with Qlogic ISP24XX/25XX/26XX, set module parameter ql2xexchoffld to any non-zero number. This will alow ISP firmware to store exchange data structures used by firmware to host memory provided by driver. ISP firmware can supports upto 32k total active exchanges. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-08qla2xxx: Enable Extended Logins supportHimanshu Madhani1-0/+7
This patch enables Extended Logins support in Qlogic ISP. To enable extended login with Qlogic ISP24XX/25XX/26XX, set module parameter ql2xexlogins to any non-zero number. This will alow ISP firmware to store port database structure information of remote login sessions to host memory provided by driver. ISP firmware supports upto 16k total logins. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-83/+79
Pull first round of SCSI updates from James Bottomley: "This includes one new driver: cxlflash plus the usual grab bag of updates for the major drivers: qla2xxx, ipr, storvsc, pm80xx, hptiop, plus a few assorted fixes. There's another tranch coming, but I want to incubate it another few days in the checkers, plus it includes a mpt2sas separated lifetime fix, which Avago won't get done testing until Friday" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (85 commits) aic94xx: set an error code on failure storvsc: Set the error code correctly in failure conditions storvsc: Allow write_same when host is windows 10 storvsc: use storage protocol version to determine storage capabilities storvsc: use correct defaults for values determined by protocol negotiation storvsc: Untangle the storage protocol negotiation from the vmbus protocol negotiation. storvsc: Use a single value to track protocol versions storvsc: Rather than look for sets of specific protocol versions, make decisions based on ranges. cxlflash: Remove unused variable from queuecommand cxlflash: shift wrapping bug in afu_link_reset() cxlflash: off by one bug in cxlflash_show_port_status() cxlflash: Virtual LUN support cxlflash: Superpipe support cxlflash: Base error recovery support qla2xxx: Update driver version to 8.07.00.26-k qla2xxx: Add pci device id 0x2261. qla2xxx: Fix missing device login retries. qla2xxx: do not clear slot in outstanding cmd array qla2xxx: Remove decrement of sp reference count in abort handler. qla2xxx: Add support to show MPI and PEP FW version for ISP27xx. ...
2015-08-27qla2xxx: Pause risc before manipulating risc semaphore.Joe Carnuccio1-0/+3
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-27qla2xxx: Use ssdid to gate semaphore manipulation.Joe Carnuccio1-2/+2
Execute qla25xx_manipulate_risc_semaphore() only for ssdid 0x0175 and 0x0240. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Avoid that sparse complains about duplicate [noderef] attributesBart Van Assche1-1/+1
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Remove __constant_ prefixBart Van Assche1-74/+69
Whether htonl() or __constant_htonl() is used, if the argument is a constant the conversion happens at compile time. Hence leave out the __constant_ prefix for this and other endianness conversion functions. This improves source code readability. [jejb: checkpatch fixes] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Remove set-but-not-used variablesBart Van Assche1-6/+4
Detected these variables by building with W=1. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-07-25qla2xxx: disable scsi_transport_fc registration in target modeAlexei Potashnik1-3/+11
There are multiple reasons for disabling this: 1. It provides no functional benefit. We pretty much only get a few more sysfs entries for each port, but all that information is already available from /sys/kernel/debug/target/qla-session-X 2. It already only works in private-loop mode. By disabling we'll be getting more uniform behavior with fabric mode. 3. It creates complications for the new PLOGI handling mechanism: scsi_transport_fc port deletion timer could race with new session from initiator and cause logout after successful login. Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-25qla2xxx: added sess generations to detect RSCN update racesAlexei Potashnik1-12/+20
RSCN processing in qla2xxx driver can run in parallel with ELS/IO processing. As such the decision to remove disappeared fc port's session could be stale, because a new login sequence has occurred since and created a brand new session. Previous mechanism of dealing with this by delaying deletion request was prone to erroneous deletions if the event that was supposed to cancel the deletion never arrived or has been delayed in processing. New mechanism relies on a time-like generation counter to serialize RSCN updates relative to ELS/IO updates. Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 06:44:20 +0300