summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_init.c
AgeCommit message (Collapse)AuthorFilesLines
2018-01-04scsi: qla2xxx: Prevent relogin trigger from sending too many commandsQuinn Tran1-5/+9
This patch adds check for pending work event before queueing relogin work to prevent redundant work to be active at the same time. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Prevent multiple active discovery commands per sessionQuinn Tran1-15/+15
Add check to allow single discovery command per session to be sent Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Delay loop id allocation at loginQuinn Tran1-29/+35
Delay loop id allocation to login time Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Allow relogin and session creation after resethimanshu.madhani@cavium.com1-1/+0
When any kind of reset is issued, current code was setting state of LOGIN pending too early. This resulted into driver not retrying relogin until pervious reloin completes. Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Add ability to use GPNFT/GNNFT for RSCN handlingQuinn Tran1-30/+35
add ability to use gpnft/gnnft to handle RSCN. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Properly extract ADISC error codesQuinn Tran1-8/+16
This patch fixes issue with extraction of ADISC error codes for decoding the error returned Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Fix GPNFT/GNNFT error handlingQuinn Tran1-4/+4
retry gpnft/gnnft if error is encountered. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Fix login state machine freezeQuinn Tran1-6/+0
Relogin stop moving forward due to improper check of scan_state flag. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Add lock protection around host lookupQuinn Tran1-0/+3
Host lookup via btree is currently protected by the hardware_lock. Add hardware_lock when modifying btree to store host pointer. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Add switch command to simplify fabric discoveryQuinn Tran1-102/+206
- add "async" gpn_ft, gnn_ft, gfpn_id, gnn_id switch commands. - For 8G and newer adapters, use async commands when it comes to fabric scan to reduce bottle neck. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Fix session cleanup for N2NQuinn Tran1-49/+102
When connection type is N_Port to N_Port (point-to-point), there is a possibilty where initiator will not send PLOGI request and will directly send PRLI. In N2N connection the port has higher port name sends the PLOGI but not allow to send PRLI if is a target mode. Only initiator is allowed to send PRLI. Current driver code deletes old session when it receives PLOGI request. If we will not receive PLOGI request then we will not delete old session and create new session. Add check for N2N with PRLI receive only and trigger cleanup. For this case, the cleanup requires individual cmd abort instead of using implicit logout as a broad stroke flush. Signed-off-by: Krishna Kant <krishna.kant@purestorage.com> Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Allow target mode to accept PRLI in dual modeQuinn Tran1-0/+5
For Dual Mode, Initiator side of the driver finish login, target side receive PRLI, but driver terminates PRLI. This patch allows target side to go ahead and accept PRLI. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Don't call dma_free_coherent with IRQ disabled.Giridhar Malavali1-1/+2
The logo ELS command allocates dma coherent memory for the data payload and serialize the completions. When this command times out, the timeout routine completes the thread waiting for completion which in turn cleanup resources allocated for this ELS command processing. Don't call generic sp->free routine when this ELS command times out to avoid to double freeing of the same resources. Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Add ability to send PRLOQuinn Tran1-0/+59
Add ability to send Implicit PRLO to flush IOs from FW back to driver. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Add option for use reserve exch for ELSQuinn Tran1-0/+6
Add option to tell FW to reserve 1/2 of emergency exchanges for ELS. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Move work element processing out of DPC threadQuinn Tran1-0/+1
DPC thread can stall during switch scan due to slow switch response. This will stall other work element that needs attention. Moving work element processing and relogin logic out of DPC thread and into its own work queue. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Replace GPDB with async ADISC commandQuinn Tran1-30/+35
Replace call to Get Port DataBase MB with PDO_FORCE_ADISC flag with async ADISC command so driver can see ADISC command has error or not. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Fix Firmware dump size for Extended login and Exchange OffloadQuinn Tran1-99/+110
This patch adjusts and reallocates fw_dump memory for target mode to save for extended login and exchange offload buffers into dump captured. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Use IOCB path to submit Control VP MBX commandQuinn Tran1-0/+1
Use IOCB patch to submit Control VP MBX command to reduce bottle-neck for mbx interface. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: qla2xxx: Fix NULL pointer access for fcport structureQuinn Tran1-4/+9
when processing iocb in a timeout case, driver was trying to log messages without verifying if the fcport structure could have valid data. This results in a NULL pointer access. Fixes: 726b85487067("qla2xxx: Add framework for async fabric discovery") Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-08scsi: qla2xxx: Fix memory leak in dual/target modehimanshu.madhani@cavium.com1-3/+1
When driver is loaded in Target/Dual mode, it creates QPair to support MQ and allocates resources for each QPair. This Qpair initialization is delayed until the FW personality is changed to Dual/Target mode by issuing chip reset. At the time of chip reset firmware is re-initilized in correct personality all the QPairs are initialized by sending MBC_INITIALIZE_MULTIQ (001Fh). This patch fixes memory leak by adding check to issue MBC_INITIALIZE_MULTIQ command only while deleting rsp/req queue when the flag is set for initiator mode, and clean up QPair resources correctly during the driver unload. This MBX does not need to be issued for Target/Dual mode because chip reset will reset ISP. Fixes: d65237c7f0860 ("scsi: qla2xxx: Fix mailbox failure while deleting Queue pairs") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-08scsi: qla2xxx: Defer processing of GS IOCB callsGiridhar Malavali1-2/+2
This patch defers processing of GS IOCB calls from interrupt context to avoid hardware spinlock recursion. Following stack trace is seen ? mod_timer+0x193/0x330 ? ql_dbg+0xa7/0xf0 [qla2xxx] _raw_spin_lock_irqsave+0x31/0x40 qla2x00_start_sp+0x3b/0x250 [qla2xxx] qla24xx_async_gnl+0x1d3/0x240 [qla2xxx] qla24xx_fcport_handle_login+0x285/0x290 [qla2xxx] ? vprintk_func+0x20/0x50 Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-08scsi: qla2xxx: Relogin to target port on a cable swapQuinn Tran1-2/+4
If user swaps one target port for another target port for same switch port, the new target port is not being recognized by the driver. Current code assumes that old Target port has recovered from link down. The fix will ask switch what is the WWPN of a specific NportID (GPNID) rather than assuming it's the same Target port which has came back. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-08scsi: qla2xxx: Fix login state machine stuck at GPDBQuinn Tran1-1/+10
This patch returns discovery state machine back to Login Complete. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-08scsi: qla2xxx: Fix re-login for Nport Handle in useQuinn Tran1-4/+40
When NPort Handle is in use, driver needs to mark the handle as used and pick another. Instead, the code clears the handle and re-pick the same handle. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-7/+133
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor updates. There's no major behaviour change or additions to the core in all of this, so the potential for regressions should be small (biggest potential being in the scsi error handler changes)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: lpfc: Fix hard lock up NMI in els timeout handling. scsi: mpt3sas: remove a stray KERN_INFO scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event() scsi: aacraid: use timespec64 instead of timeval scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair() scsi: mpt3sas: fix dma_addr_t casts scsi: be2iscsi: Use kasprintf scsi: storvsc: Avoid excessive host scan on controller change scsi: lpfc: fix kzalloc-simple.cocci warnings scsi: mpt3sas: Update mpt3sas driver version. scsi: mpt3sas: Fix sparse warnings scsi: mpt3sas: Fix nvme drives checking for tlr. scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives. scsi: mpt3sas: scan and add nvme device after controller reset scsi: mpt3sas: Set NVMe device queue depth as 128 scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware. scsi: mpt3sas: API's to remove nvme drive from sml scsi: mpt3sas: API 's to support NVMe drive addition to SML ...
2017-11-09scsi: qla2xxx: Convert timers to use timer_setup()Kees Cook1-2/+2
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: qla2xxx-upstream@qlogic.com Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Bart Van Assche <Bart.VanAssche@wdc.com>
2017-10-17scsi: qla2xxx: Use ql2xnvmeenable to enable Q-Pair for FC-NVMeHimanshu Madhani1-1/+1
In some environments, user can choose to not enable SCSI-MQ but wants to use FC-NVMe feature of the driver. Since driver relies on Q-Pairs to allocate FC-NVMe resources, use existing module parameter to create Q-Pairs when FC-NVMe is enabled. Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: qla2xxx: Changes to support N2N loginsDuane Grigsby1-4/+131
If we discovered a topology that is N2N then we will issue a login to the target. If our WWPN is bigger than the target's WWPN then we will initiate login, otherwise we will just wait for the target to initiate login. [mkp: many whitespace errors] Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com> Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-26scsi: qla2xxx: Cocci spatch "pool_zalloc-simple"Thomas Meyer1-2/+1
Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0. Found by coccinelle spatch "api/alloc/pool_zalloc-simple.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-31scsi: qla2xxx: Reset the logo flag, after target re-login.Quinn Tran1-0/+1
After relogin is sucessful, "send_els_logo" flag needs to be reinitialized. This will allow next re-login to happen successfully. In target mode, this flag was not reset correctly, causing IO's failure during reset recovery and port ON/OFF test cases from initiator. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-31scsi: qla2xxx: Clear fc4f_nvme flagDarren Trap1-0/+1
Signed-off-by: Darren Trap <darren.trap@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: qla2xxx: Recheck session state after RSCNQuinn Tran1-3/+1
When RSCN is delivered for specific remote port. Use ADISC to verify the session is still valid or not. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: qla2xxx: Allow SNS fabric login to be retriedJoe Carnuccio1-13/+5
If SNS fabric login fails, set loop resync flag to retry via dpc. Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: qla2xxx: Prevent sp->free null/uninitialized pointer dereference.Joe Carnuccio1-6/+6
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: qla2xxx: Add ability to autodetect SFP typeQuinn Tran1-0/+143
SFP can come in 2 formats: short range/SR and long range/LR. For LR, user the can increase the number of Buffer to Buffer credits between end points via Cavium's command line tool. By default, FW uses a lower BB Credit value optimized for SR. This patch will read the SFP for each link up event and during chip reset sequence. If the SFP type and setting are mismatch, then the chip is reset 1 time to use the appropriate setting. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: qla2xxx: Fix NPIV host enable after chip resetQuinn Tran1-1/+1
For NPIV ports, call configure_hba() so that NPIV ports can proceed to loop initialization. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: qla2xxx: Add command completion for error pathDuane Grigsby1-0/+1
The driver held spinlocks during callbacks for NVME errors which resulted in a deadlock because recovery LS cmds needed the same lock. Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: qla2xxx: Update fw_started flags at qpair creation.himanshu.madhani@cavium.com1-0/+1
Fixes: 4b60c82736d0 ("scsi: qla2xxx: Add fw_started flags to qpair") Cc: <stable@vger.kernel.org> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-02scsi: qla2xxx: fix a bunch of typos and spelling mistakesColin Ian King1-1/+1
Fix the following typos/spelling mistakes: "attribure" -> "attribute" "suppored" -> "supported" "Symobilic" -> "Symbolic" "iteself" -> "itself" "reqeust" -> "request" "nvme_wait_on_comand" -> "nvme_wait_on_command" "bount" -> "bound" "captrue_mask" -> "capture_mask" "tempelate" -> "template" ..and also unwrap a line to fix a checkpatch warning. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-28scsi: qla2xxx: Send FC4 type NVMe to the management serverDuane Grigsby1-1/+10
This patch adds switch command support for FC-4 type of FC-NVMe (0x28) for resgistering HBA port to the management server. RFT_ID command is used to register FC-4 type of 0x28 and RFF_ID is used to register FC-4 features bits for FC-NVMe port. Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurhty@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-By: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-28scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registrationDuane Grigsby1-0/+8
This code provides the interfaces to register remote and local ports of FC4 type 0x28 with the FC-NVMe transport and transports the requests (FC-NVMe FC link services and FC-NVMe commands IUs) to the fabric. It also provides the support for allocating h/w queues and aborting FC-NVMe FC requests. Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurhty@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-28scsi: qla2xxx: Add FC-NVMe port discovery and PRLI handlingDuane Grigsby1-9/+159
Added logic to change the login process into an optional PRIL step for FC-NVMe ports as a separate operation, such that we can change type to 0x28 (NVMe). Currently, the driver performs the PLOGI/PRLI together as one operation, but if the discovered port is an NVMe port then we first issue the PLOGI and then we issue the PRLI. Also, the fabric discovery logic was changed to mark each discovered FC NVMe port, so that we can register them with the FC-NVMe transport later. Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurhty@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-28scsi: qla2xxx: Include Exchange offload/Extended Login into FW dumpQuinn Tran1-0/+7
Add missing memory dump of Exchange Offload and Extended login into FW dump. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-28scsi: qla2xxx: Add function call to qpair for door bellQuinn Tran1-0/+3
Add call back to door bell for qpair. This help reduce access to qla_hw_data structure, in order to reduce cach thrash. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-28scsi: qla2xxx: use shadow register for ISP27XXQuinn Tran1-0/+1
For ISP27XX, use shadow register to read FW provided REQQ's consumer index. The shadow register is dma'ed by firmware. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-28scsi: qla2xxx: move fields from qla_hw_data to qla_qpairQuinn Tran1-2/+12
- Move chip_reset, enable_class_2 fields from qla_hw_data to qla_qpair to reduce cache thrash for target MQ. - Optimizations to reduce unnecessary memory load for good path io. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-28scsi: qla2xxx: Add fw_started flags to qpairQuinn Tran1-2/+2
Add fw_started flag to qpair to reduce cache thrash. This reduce access to qla_hw_data structure by each qpair. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-28scsi: qla2xxx: Fix mailbox failure while deleting Queue pairsSawan Chandak1-2/+8
In target mode driver, queue pairs are not created during driver load time, instead they are created at the configuration time after chip reset. If a user tries to load/unload driver after queue pairs are created, then there would be mailbox failure, while deleting queue pairs. Flag is added to check if queue pairs are created or not. Queue pairs will be deleted only If they were created during target configuration. Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-28scsi: qla2xxx: Enable Target Multi QueueQuinn Tran1-0/+3
Enable Multi Queue for Target mode. At Initiator LUN scan time, each LUN is assign to a QPair. Each QPair is affinitize to certain CPU. When new cmd arrives from the wire, the lunid is used to search for qpair. The qpair's affinitized cpuid will be used to queue up the work element. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 13:02:05 +0300