summaryrefslogtreecommitdiff
path: root/drivers/scsi/cxgbi
AgeCommit message (Collapse)AuthorFilesLines
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-8/+23
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07cxgb4: Fix tids count for ipv6 offload connectionGanesh Goudar1-3/+5
the adapter consumes two tids for every ipv6 offload connection be it active or passive, calculate tid usage count accordingly. Also change the signatures of relevant functions to get the address family. Signed-off-by: Rizwan Ansari <rizwana@chelsio.com> Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02scsi: cxgb4i: libcxgbi: in error case RST tcp connVarun Prakash3-8/+23
If logout response is not received and ->ep_disconnect() is called then close tcp conn by RST instead of FIN to cleanup conn resources immediately. Also move ->csk_push_tx_frames() above 'done:' to avoid calling ->csk_push_tx_frames() in error cases. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-24scsi: libcxgbi: fix skb use after freeVarun Prakash2-15/+26
skb->data is assigned to task->hdr in cxgbi_conn_alloc_pdu(), skb gets freed after tx but task->hdr is still dereferenced in iscsi_tcp_task_xmit() to avoid this call skb_get() after allocating skb and free the skb in cxgbi_cleanup_task() or before allocating new skb in cxgbi_conn_alloc_pdu(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-19scsi: cxgb4i: update module descriptionVarun Prakash1-1/+1
Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-3/+3
Pull networking updates from David Miller: "Highlights: 1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini Varadhan. 2) Simplify classifier state on sk_buff in order to shrink it a bit. From Willem de Bruijn. 3) Introduce SIPHASH and it's usage for secure sequence numbers and syncookies. From Jason A. Donenfeld. 4) Reduce CPU usage for ICMP replies we are going to limit or suppress, from Jesper Dangaard Brouer. 5) Introduce Shared Memory Communications socket layer, from Ursula Braun. 6) Add RACK loss detection and allow it to actually trigger fast recovery instead of just assisting after other algorithms have triggered it. From Yuchung Cheng. 7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot. 8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert. 9) Export MPLS packet stats via netlink, from Robert Shearman. 10) Significantly improve inet port bind conflict handling, especially when an application is restarted and changes it's setting of reuseport. From Josef Bacik. 11) Implement TX batching in vhost_net, from Jason Wang. 12) Extend the dummy device so that VF (virtual function) features, such as configuration, can be more easily tested. From Phil Sutter. 13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric Dumazet. 14) Add new bpf MAP, implementing a longest prefix match trie. From Daniel Mack. 15) Packet sample offloading support in mlxsw driver, from Yotam Gigi. 16) Add new aquantia driver, from David VomLehn. 17) Add bpf tracepoints, from Daniel Borkmann. 18) Add support for port mirroring to b53 and bcm_sf2 drivers, from Florian Fainelli. 19) Remove custom busy polling in many drivers, it is done in the core networking since 4.5 times. From Eric Dumazet. 20) Support XDP adjust_head in virtio_net, from John Fastabend. 21) Fix several major holes in neighbour entry confirmation, from Julian Anastasov. 22) Add XDP support to bnxt_en driver, from Michael Chan. 23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan. 24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi. 25) Support GRO in IPSEC protocols, from Steffen Klassert" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits) Revert "ath10k: Search SMBIOS for OEM board file extension" net: socket: fix recvmmsg not returning error from sock_error bnxt_en: use eth_hw_addr_random() bpf: fix unlocking of jited image when module ronx not set arch: add ARCH_HAS_SET_MEMORY config net: napi_watchdog() can use napi_schedule_irqoff() tcp: Revert "tcp: tcp_probe: use spin_lock_bh()" net/hsr: use eth_hw_addr_random() net: mvpp2: enable building on 64-bit platforms net: mvpp2: switch to build_skb() in the RX path net: mvpp2: simplify MVPP2_PRS_RI_* definitions net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT net: mvpp2: remove unused register definitions net: mvpp2: simplify mvpp2_bm_bufs_add() net: mvpp2: drop useless fields in mvpp2_bm_pool and related code net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue' net: mvpp2: release reference to txq_cpu[] entry after unmapping net: mvpp2: handle too large value in mvpp2_rx_time_coal_set() net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set ...
2017-02-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-0/+2
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid, megaraid_sas, ...). There's also an assortment of minor fixes and the major update of switching a bunch of drivers to pci_alloc_irq_vectors from Christoph" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits) scsi: megaraid_sas: handle dma_addr_t right on 32-bit scsi: megaraid_sas: array overflow in megasas_dump_frame() scsi: snic: switch to pci_irq_alloc_vectors scsi: megaraid_sas: driver version upgrade scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2 scsi: megaraid_sas: Indentation and smatch warning fixes scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints scsi: megaraid_sas: Increase internal command pool scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete scsi: megaraid_sas: Bail out the driver load if ld_list_query fails scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate scsi: megaraid_sas: update can_queue only if the new value is less scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD ...
2017-02-07scsi: remove eh_timed_out methods in the transport templateChristoph Hellwig2-0/+2
Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-07net-next: treewide use is_vlan_dev() helper function.Parav Pandit1-3/+3
This patch makes use of is_vlan_dev() function instead of flag comparison which is exactly done by is_vlan_dev() helper function. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jon Maxwell <jmaxwell37@gmail.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-14locking/atomic, kref: Add kref_read()Peter Zijlstra1-2/+2
Since we need to change the implementation, stop exposing internals. Provide kref_read() to read the current reference count; typically used for debug messages. Kills two anti-patterns: atomic_read(&kref->refcount) kref->refcount.counter Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-14scsi: libcxgbi: return error if interface is not upVarun Prakash1-0/+12
Do not post hw active open cmd if IFF_UP is not set or link is down on the interface, return -ENETDOWN in this case. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: cxgb4i: libcxgbi: add missing module_put()Varun Prakash3-3/+12
Add module_put() in cxgbi_sock_act_open_req_arp_failure() to release module reference in case of arp failure, also check return value of try_module_get() before posting active open hw cmd. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: cxgb4i: libcxgbi: cxgb4: add T6 iSCSI completion featureVarun Prakash3-26/+213
T6 adapters reduce number of completions to host by generating single completion for all the directly placed(DDP) iSCSI pdus in a sequence. This patch adds new structure for completion hw cmd (struct cpl_rx_iscsi_cmp) and implements T6 completion feature. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: cxgb4i: libcxgbi: add active open cmd for T6 adaptersVarun Prakash2-15/+77
Add T6 active open cmd to open active connections on T6 adapters. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14scsi: cxgb4i: use cxgb4_tp_smt_idx() to get smt_idxVarun Prakash1-2/+2
cxgb4_tp_smt_idx() is defined in cxgb4 driver, it returns smt_idx for T4,T5,T6 adapters. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-1/+1
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas). There's also an assortment of minor fixes, mostly in error legs or other not very user visible stuff. The major change is the pci_alloc_irq_vectors replacement for the old pci_msix_.. calls; this effectively makes IRQ mapping generic for the drivers and allows blk_mq to use the information" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (256 commits) scsi: qla4xxx: switch to pci_alloc_irq_vectors scsi: hisi_sas: support deferred probe for v2 hw scsi: megaraid_sas: switch to pci_alloc_irq_vectors scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devices scsi: be2iscsi: set errno on error path scsi: be2iscsi: set errno on error path scsi: hpsa: fallback to use legacy REPORT PHYS command scsi: scsi_dh_alua: Fix RCU annotations scsi: hpsa: use %phN for short hex dumps scsi: hisi_sas: fix free'ing in probe and remove scsi: isci: switch to pci_alloc_irq_vectors scsi: ipr: Fix runaway IRQs when falling back from MSI to LSI scsi: dpt_i2o: double free on error path scsi: cxlflash: Migrate scsi command pointer to AFU command scsi: cxlflash: Migrate IOARRIN specific routines to function pointers scsi: cxlflash: Cleanup queuecommand() scsi: cxlflash: Cleanup send_tmf() scsi: cxlflash: Remove AFU command lock scsi: cxlflash: Wait for active AFU commands to timeout upon tear down scsi: cxlflash: Remove private command pool ...
2016-11-30scsi: cxgb4i: Add a missing call to neigh_releaseQuentin Lambert1-1/+1
Most error branches following the call to dst_neigh_lookup contain a call to neigh_release. This patch add these calls where they are missing. This issue was found with Hector. Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Acked-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-18cxgb4: Allocate Tx queues dynamicallyHariprasad Shenai1-0/+1
Allocate resources dynamically for Upper layer driver's (ULD) like cxgbit, iw_cxgb4, cxgb4i and chcr. The resources allocated include Tx queues which are allocated when ULD register with cxgb4 driver and freed while un-registering. The Tx queues which are shared by ULD shall be allocated by first registering driver and un-allocated by last unregistering driver. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10Merge remote-tracking branch 'mkp-scsi/4.9/scsi-fixes' into fixesJames Bottomley1-1/+2
2016-11-09scsi: libcxgbi: fix incorrect DDP resource cleanupVarun Prakash1-1/+2
Before calling task_release_itt() task data is memset to zero because of which DDP context information is lost resulting in incorrect DDP resource cleanup, to fix this call task_release_itt() before memset. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-10-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-0/+5
Pull more SCSI updates from James Bottomley: "This is just a set of minor updates and fixes which weren't quite ready in time for the first pull request. The only real thing of note is Mike Christie is stepping down as Maintainer of iscsi to be replaced by Lee Duncan and Chris Leech" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: Kconfig fix scsi: g_NCR5380: Stop using scsi_module.c scsi: g_NCR5380: Reduce overrides[] from array to struct scsi: g_NCR5380: Remove deprecated __setup scsi: ufs: Fix error return code in ufshcd_init() scsi: ufs: Data Segment only needed for WRITE DESCRIPTOR scsi: cxgb4i: Set completion bit in work request MAINTAINERS: Update open-iscsi maintainers scsi: ufs: Enable no vccq quirk for skhynix device scsi: be2iscsi: mark symbols static where possible
2016-09-28scsi: cxgb4i: Set completion bit in work requestVarun Prakash1-0/+5
If SKCBF_TX_FLAG_COMPL flag is set and unacknowledged credits are >= max credits / 2, set completion bit in work request to reclaim credits. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-19chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ↵Hariprasad Shenai1-0/+3
ULD's Allocate resources dynamically to cxgb4's Upper layer driver's(ULD) like cxgbit, iw_cxgb4 and cxgb4i. Allocate resources when they register with cxgb4 driver and free them while unregistering. All the queues and the interrupts for them will be allocated during ULD probe only and freed during remove. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25cxgb3i, cxgb4i: fix symbol not declared sparse warningVarun Prakash2-3/+3
Fix following sparse warnings warning: symbol 'cxgb3i_ofld_init' was not declared. Should it be static? warning: symbol 'cxgb4i_cplhandlers' was not declared. Should it be static? warning: symbol 'cxgb4i_ofld_init' was not declared. Should it be static? Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25libcxgb: export ppm release and tagmask set apiVarun Prakash2-0/+2
Export cxgbi_ppm_release() to release ppod manager and cxgbi_tagmask_set() to set tag mask, they are used by cxgb3i, cxgb4i and cxgbit. Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25cxgb3i: add iSCSI DDP supportVarun Prakash1-1/+118
Add iSCSI DDP support in cxgb3i driver using common iSCSI DDP Page Pod Manager. Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25cxgb4i,libcxgbi: add iSCSI DDP supportVarun Prakash8-2/+507
Add iSCSI DDP support in cxgb4i driver using common iSCSI DDP Page Pod Manager. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25cxgb3i,cxgb4i,libcxgbi: remove iSCSI DDP supportVarun Prakash4-1009/+0
Remove old ddp code from cxgb3i,cxgb4i,libcxgbi. Next two commits adds DDP support using common iSCSI DDP Page Pod Manager. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25cxgbi: fix uninitialized flowi6Jiri Benc1-0/+1
ip6_route_output looks into different fields in the passed flowi6 structure, yet cxgbi passes garbage in nearly all those fields. Zero the structure out first. Fixes: fc8d0590d9142 ("libcxgbi: Add ipv6 api to driver") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-24Merge branch 'for-next-merge' of ↵Linus Torvalds1-17/+0
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull more SCSI target updates from Nicholas Bellinger: "This series contains cxgb4 driver prerequisites for supporting iscsi segmentation offload (ISO), that will be utilized for a number of future v4.7 developments in iscsi-target for supporting generic hw offloads" * 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: cxgb4: update Kconfig and Makefile cxgb4: add iSCSI DDP page pod manager cxgb4, iw_cxgb4: move delayed ack macro definitions cxgb4: move VLAN_NONE macro definition cxgb4: update struct cxgb4_lld_info definition cxgb4: add definitions for iSCSI target ULD cxgb4, cxgb4i: move struct cpl_rx_data_ddp definition cxgb4, iw_cxgb4, cxgb4i: remove duplicate definitions cxgb4, iw_cxgb4: move definitions to common header file cxgb4: large receive offload support cxgb4: allocate resources for CXGB4_ULD_ISCSIT cxgb4: add new ULD type CXGB4_ULD_ISCSIT
2016-03-22cxgb4, cxgb4i: move struct cpl_rx_data_ddp definitionVarun Prakash1-12/+0
move struct cpl_rx_data_ddp definition to common header file t4_msg.h. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-22cxgb4, iw_cxgb4, cxgb4i: remove duplicate definitionsVarun Prakash1-5/+0
move struct ulptx_idata definition to common header file t4_msg.h. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-05cxgb4i: don't redefine DIV_ROUND_UPNicolas Dichtel1-1/+1
let's use the common definition to avoid the following warning during the compilation: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:161:0: warning: "DIV_ROUND_UP" redefined #define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) ^ In file included from include/linux/list.h:8:0, from include/linux/module.h:9, from drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:16: include/linux/kernel.h:67:0: note: this is the location of the previous definition #define DIV_ROUND_UP __KERNEL_DIV_ROUND_UP ^ Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08cxgbi: Typo in MODULE_PARM_DESCDan Carpenter1-1/+1
The module_param is "cxgb3i_rx_credit_thres" so the MODULE_PARM_DESC() should match that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-10drivers/scsi/cxgbi: fix build with EXTRA_CFLAGSJiri Slaby2-2/+2
EXTRA_CFLAGS are intended to be used on the command line, not by Kbuild. In case of cxgbi drivers, use of EXTRA_CFLAGS results in a compilation failure: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:24:21: fatal error: t4_regs.h: No such file or directory when building like: $ make drivers/scsi/cxgbi/ EXTRA_CFLAGS=-Wwhatever Use ccflags-y instead of EXTRA_CFLAGS. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-15cxgb4i: Increased the value of MAX_IMM_TX_PKT_LEN from 128 to 256 bytesKaren Xie1-1/+1
This helps improving the latency of small packets. Signed-off-by: Rakesh Ranjan <rakesh@chelsio.com> Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-01libcxgbi: use kvfree() in cxgbi_free_big_mem()Pekka Enberg1-4/+1
Use kvfree() instead of open-coding it. Signed-off-by: Pekka Enberg <penberg@kernel.org> Cc: "James E.J. Bottomley" <JBottomley@odin.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
2015-05-25ipv6: Remove external dependency on rt6i_dst and rt6i_srcMartin KaFai Lau1-1/+1
This patch removes the assumptions that the returned rt is always a RTF_CACHE entry with the rt6i_dst and rt6i_src containing the destination and source address. The dst and src can be recovered from the calling site. We may consider to rename (rt6i_dst, rt6i_src) to (rt6i_key_dst, rt6i_key_src) later. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25cxgb4i: set the initial sequence numberKaren Xie2-2/+8
set the initial sequence number so the 1st byte of payload is aligned on the 8-byte boundary. Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-25cxgbi: update driver versionsKaren Xie3-6/+13
Change driver version to follow the same format as other Chelsio drivers. Added missing release date back to cxgb4i and version string back to libcxgbi. Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-25cxgbi: update copyright to 2015Karen Xie6-6/+6
Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-25cxgbi: use per-connection link-speed dependent send/recv windowsKaren Xie4-23/+40
For adapters supporting both 10G and 40G use per-connection send/recv window and calculate the size based on the link speed. Signed-off-by: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-01-16cxgb4i : Call into recently added cxgb4 ipv6 apiAnish Bhatt1-1/+22
Get a reference on every ipv6 address we offload to hardware so that it cannot be prematurely cleared out before cleanup. Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13iw_cxgb4/cxgb4/cxgb4vf/cxgb4i/csiostor: Cleanup register defines/macros ↵Hariprasad Shenai1-3/+3
related to all other cpl messages This patch cleanups all other macros/register define related to CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13iw_cxgb4/cxgb4/cxgb4i: Cleanup register defines/MACROS related to CM CPL ↵Hariprasad Shenai1-6/+6
messages This patch cleanups all macros/register define related to connection management CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12libcxgbi: fix freeing skb prematurelyKaren Xie1-1/+3
With debug turned on the debug print would access the skb after it is freed. Fix it to free the skb after the debug print. Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12cxgb4i: use set_wr_txq() to set tx queuesKaren Xie1-11/+5
use cxgb4's set_wr_txq() for setting of the tx queue for a outgoing packet. remove the similar function in cxgb4i. Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12cxgb4i: handle non-pdu-aligned rx dataKaren Xie1-0/+22
Abort the connection upon receiving of cpl_rx_data, which means the pdu cannot be recovered from the tcp stream. This generally is due to pdu header corruption. Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12cxgb4i: additional types of negative adviceKaren Xie1-3/+9
Treat both CPL_ERR_KEEPALV_NEG_ADVICE and CPL_ERR_PERSIST_NEG_ADVICE as negative advice. Signed-off-by: Karen Xie <kxie@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-28 01:16:24 +0300