summaryrefslogtreecommitdiff
path: root/drivers/s390/net/qeth_l3_main.c
AgeCommit message (Collapse)AuthorFilesLines
2011-07-22qeth: do vlan cleanupJiri Pirko1-54/+46
- unify vlan and nonvlan rx path - kill card->vlangrp and qeth_l3_vlan_rx_register Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-18net: Abstract dst->neighbour accesses behind helpers.David S. Miller1-7/+18
dst_{get,set}_neighbour() Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-19qeth: use ndo_set_features callback for initial setup and recoveryFrank Blaschka1-52/+25
This patch uses the ndo_set_features callback during normal device startup or recovery to turn on hardware RX checksum. Patch was done with much help from Michal Miroslaw, thx!!! Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qeth: add OSA concurrent hardware trapFrank Blaschka1-36/+17
This patch improves FFDC (first failure data capture) by requesting a hardware trace in case the device driver, the hardware or a user detects an error. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qeth: convert to hw_features part 2Frank Blaschka1-56/+48
Set rx csum default to hw checksumming again. Remove sysfs interface for rx csum (checksumming) and TSO (large_send). With the new hw_features it does not work to keep the old sysfs interface in parallel. Convert options.checksum_type to new hw_features. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: s390: convert to hw_featuresMichał Mirosław1-84/+33
options.large_send was easy to get rid of. options.checksum_type has deeper roots so is left for later cleanup. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-15qeth: change some configurations defaultsFrank Blaschka1-0/+5
This patch turns on RX checksum and GRO by default. To improve receiving performance and reduce congestion in case of network bursts we also increase the default number of inbound buffers. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-27qeth: remove needless IPA-commands in offlineUrsula Braun1-51/+4
If a qeth device is set offline, data and control subchannels are cleared, which means removal of all IP Assist Primitive settings implicitly. There is no need to delete those settings explicitly. This patch removes all IP Assist invocations from offline. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-16qeth: l3 hw tx csum circumvent hw bugFrank Blaschka1-1/+3
Some OSA level have a bug in the hw tx csum logic. We can circumvent this bug by turning on IP hw csum also. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-16qeth: postpone open till recovery is finishedUrsula Braun1-2/+16
The open function of qeth is not executed if the qeth device is in state DOWN or HARDSETUP. A recovery switches from state SOFTSETUP to HARDSETUP to DOWN to HARDSETUP and back to SOFTSETUP. If open and recover are running concurrently, open fails if it hits the states HARDSETUP or DOWN. This patch inserts waiting for recovery finish in the qeth open functions to enable successful qeth device opening in spite of a running recovery. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-11qeth: l3 add vlan hdr in passthru framesFrank Blaschka1-1/+1
OSA l3 mode is hw accelerated VLAN only for IPv4. Take care we add the vlan hdr to a passthru frame in the device driver. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-11qeth: support VIPA add/del in offline modeEinar Lueck1-1/+4
Only work through the IP adddress to do list if the card is UP or SOFTSETUP. Enables to configure VIPA add/del in offline mode. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-11qeth: support ipv6 query arp cache for HiperSocketsEinar Lueck1-72/+143
Function qeth_l3_arp_query now queries for IPv6 addresses, too, if QETH_QARP_WITH_IPV6 is passed as parameter to the ioctl. HiperSockets and GuestLAN in HiperSockets mode provide corresponding entries. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29qeth: l3 fix len in tso hdrFrank Blaschka1-0/+1
The tso hdr is longer then the regular l3 hdr. Fix the calculation of the total len by accounting the size of the tso hdr. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29qeth: enable interface setup if LAN is offlineUrsula Braun1-5/+6
Device initialization of a qeth device contains a STARTLAN step. This step may fail, if cable is not yet plugged in. The qeth device stays in state HARDSETUP until cable is plugged in. This prevents further preparational initialization steps of the qeth device and its network interface. This patch makes sure initialization of qeth device continues, even though cable is not yet plugged in. Once carrier is available, qeth is notified, triggers a recovery which results in a working network interface. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29qeth lcs: convert mc rwlock to RCUSachin Sant1-5/+6
Commit 1d7138de878d1d4210727c1200193e69596f93b3 igmp: RCU conversion of in_dev->mc_list converted rwlock to RCU. Update the s390 network drivers(qeth & lcs) code to adapt to this change. V2 : Changes based on suggestions given by Eric Dumazet Signed-off-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.Jesse Gross1-3/+3
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04qeth: tagging with VLAN-ID 0Ursula Braun1-14/+13
This patch adapts qeth to handle tagged frames with VLAN-ID 0 and with or without priority information in the tag. It enables qeth to receive priority-tagged frames on a base interface, for example from z/OS, without configuring an additional VLAN interface. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09qeth: NAPI support for l2 and l3 disciplineFrank Blaschka1-71/+111
This patch adds NAPI support to the qeth layer 2 and layer 3 discipline. It is important to understand that we can not enable/disable IRQs as usual, we have to use the corresponding new QDIO interface. Also to not overdraw the budget we have to stop and restart buffer processing at any point during processing a bulk of QDIO buffers. Having the driver NAPI enabled it is possible to turn on GRO for the layer 3 discipline. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09qeth: Use %pI6Joe Perches1-6/+1
Format an ipv6 address using vsprintf extensions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: serialize sysfs-triggered device configurationsUrsula Braun1-1/+7
This patch serializes device removal and other sysfs-triggered configurations by moving removal of sysfs-attributes to the beginning of the remove functions. And it serializes online/offline setting and discipline-switching (causing reestablishing of the net_device) by making use of a new discipline mutex. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: IP address takeover flag settingKlaus-Dieter Wacker1-1/+1
The qeth IP address flag setting is possible when device is offline. When setting device online afterwards the current set IP addresses have to be correctly registered with the device regarding the IP address takeover attribute. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24qeth: fix page breaks in hw headersFrank Blaschka1-13/+13
Turning on memory debugging showed there could be page breaks in hardware headers. OSA does not allow this so we had to add code to bounce the header in case there is a page break. This patch also fixes a problem in case the skb->data part of a fragmented skb spreads multiple pages. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24qeth: Fold qeth_trace debug areaCarsten Otte1-113/+113
This patch removes the qeth_trace debug area. All relevant data is logged into either qeth_setup or into each card's own debug area. Superfluous information (such as the card number when logging into the card's own debug area) is removed without replacement. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18qeth: support the new OSA CHPID types OSX and OSMUrsula Braun1-2/+4
The qeth driver is enabled to support the new OSA CHPID types OSX and OSM. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16qeth: synchronize configuration interfaceFrank Blaschka1-1/+7
Synchronize access to the drivers configuration interface. Also do not allow configuration changes during online/offline transition. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16qeth: exploit HW TX checksummingFrank Blaschka1-25/+67
OSA supports HW TX checksumming in layer 3 mode. Enable this feature and remove software fallback used for TSO. Cleanup checksum bits to indicate OSA can do checksumming only for IPv4 TCP and UDP. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-22qeth: l3 fix build error in ipv6 addr list handlingFrank Blaschka1-1/+1
Adapt qeth l3 to: commit c2e21293c054817c42eb5fa9c613d2ad51954136 (ipv6: convert addrconf list to hlist) converted lst_next member of inet6_ifaddr struct to a hlist. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: no recovery after layer mismatch (z/VM NICs)Ursula Braun1-10/+6
Depending on their definition in z/VM, virtual devices for z/VM VSWITCH or GuestLAN must be configured either in layer2 or in layer3 mode. If qeth detects a layer mismatch, device activation fails. Trying to recover from this error cannot help; thus scheduling a recovery should be avoided. In addition, since recovery is forbidden during online setting of a qeth device, existence of its network device is guaranteed for all dev_close() calls in qeth. The corresponding checks can be removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: set promisc off after trace disabling failureUrsula Braun1-26/+30
If HiperSockets Network Traffic Analyzer is switched off, but trace disabling fails somehow, the qeth driver does not switch off its promisc mode status. A following sniffer reactivation fails, since qeth does not see a need to reenable tracing. At the same time the code analyzing results of trace commands is restructured. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: l3 send dhcp in non pass thru modeFrank Blaschka1-6/+4
dhcp frames are valid IPv4 packets so there is no need to send them in pass thru mode. This allows dhcp packets to pass HiperSockets. Also the dhcp release frame is send out correctly with this patch. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14qeth: avoid recovery during device online settingUrsula Braun1-2/+0
If a qeth device is set online, several initialisation steps are performed. If a failure in one of these steps occurs, the qeth device is reset into DOWN state. If due to the failure a qeth recovery is scheduled and started in another thread, this might cause all kinds of conflicts, even a kernel panic. The patch forbids scheduling of a qeth recovery while online processing is performed till the card is in state SOFTSETUP. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-14qeth: HiperSockets Network Traffic AnalyzerUrsula Braun1-24/+150
New feature to trace HiperSockets network traffic for debugging purposes. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: allow dynamic change of rx checksummingFrank Blaschka1-14/+30
Technically there is no need to set the card offline to change RX checksumming. Get rid of this stupid limitation. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: rework TSO functionsFrank Blaschka1-13/+58
The maximum TSO size OSA can handle is 15 * PAGE_SIZE. This patch reduces gso_max_size to this value and adds some sanity checks and statistics to the TSO implementation. Since only layer 3 is able to do TSO move all TSO related functions to the qeth_l3 module. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: Recognize return codes of ccw_device_set_onlineUrsula Braun1-18/+7
Setting a qeth device online requires to call function ccw_device_set_online() for read-, write-, and data-subchannel. Failures should be detected immediately without an attempt to invoke follow-on activity qeth_qdio_clear_card()., In addition, ccw_device_set_online calls are consolidated in qeth_core_main.c only. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: Exploit Connection IsolationEinar Lueck1-0/+2
Isolate data connection to a shared OSA card against other data connections to the same OSA card. Connectivity between isolated data connections sharing the same OSA card is therefore possible only through external network gear (e.g. a router). Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05qeth: Convert ethtool get_stats_count() ops to get_sset_count()Ben Hutchings1-1/+1
This string query operation was supposed to be replaced by the generic get_sset_count() starting in 2007. Convert qeth's implementation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03drivers: Kill now superfluous ->last_rx storesEric Dumazet1-1/+0
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Neil Horman <nhorman@txudriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02netdev: drivers should make ethtool_ops constStephen Hemminger1-1/+1
No need to put ethtool_ops in data, they should be const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-27qeth: Cleanup for cast-type determination.Klaus-Dieter Wacker1-1/+46
Clear separation of cast-type determination (send path) for layer-2 resp. layer-3. Allowing to have inline functions for qeth layer- discipline. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-27qeth: scheduling while atomic during ifconfig online sequenceFrank Blaschka1-0/+1
In case the IP address list contains entries (not removed when the device was set offline) this entries should be registered next time the device is brought online. In the past this was done implicitly with the device open call but since we wait in the set IPv4 IPA and the device open common code holds various locks this does not work any longer. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06net: convert remaining non-symbolic return values in ndo_start_xmit() functionsPatrick McHardy1-0/+1
This patch converts the remaining occurences of raw return values to their symbolic counterparts in ndo_start_xmit() functions that were missed by the previous automatic conversion. Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero is changed to explicitly use NETDEV_TX_OK. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16[S390] pm: qeth driver power management callbacksFrank Blaschka1-1/+51
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-03net: skb->dst accessorsEric Dumazet1-4/+4
Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-31net: unset IFF_XMIT_DST_RELEASE for qeth and ipoibEric Dumazet1-0/+1
Last two drivers that need skb->dst in their start_xmit() function Tell dev_hard_start_xmit() to no release it by unsetting IFF_XMIT_DST_RELEASE Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21qeth: omit upstream checksumming for HiperSocketsUrsula Braun1-7/+13
For HiperSocket devices receive-path checksumming is not required. Thus NO_CHECKSUMMING is used as default for HiperSocket interfaces. For layer3 devices configured with NO_CHECKSUMMING received skbs should have set their ip_summed field to CHECKSUM_UNNECESSARY. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21qeth: avoid crash after detach of replugged deviceUrsula Braun1-1/+3
If a qeth device is plugged off, setting the device online stops in state HARDSETUP and a failure is reported to the base cio-layer causing halt/clear to be invoked. Replugging the device again triggers a qeth recovery without notification of the cio-layer. If a device is ungrouped in this state, the qeth set_offline function is not invoked, because the corresponding ccwgroup device is not in state ONLINE. Then incoming traffic is still handled by the qdio layer resulting in a crash in qeth_l<x>_qdio_input_handler, because (part of) the qeth data structures for this device are already removed. Solution: After replugging the device qeth recovery should lead to a working net device. Thus a "LAN offline" result when setting a qeth device online must not report a failure to the base cio-layer. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 08:34:59 +0300