summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)AuthorFilesLines
2017-02-01rtc: bq32000: add support to enable disable the trickle charge FET bypassEnric Balletbo i Serra1-0/+76
The bq32000 includes a trickle charge circuit to maintain the charge of the backup supply when a super capacitor is used. You can enable the charging circuit by setting 'trickle-resistor-ohms', additionally you can set TCFE to 1 to bypass the internal diode and boost the charge voltage of the backup supply. You might want to enable/disable the TCFE switch from userspace (e.g when device is only connected to a battery) This patch introduces a new sysfs entry to enable and disable this FET form userspace. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-01rtc: sun6i: Switch to devm_rtc_device_registerMaxime Ripard1-12/+2
Now that we have a devm variant of rtc_device_register, switch to it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-01rtc: sun6i: Expose the 32kHz oscillatorMaxime Ripard1-13/+133
The RTC controls the input source of the main 32kHz oscillator in the system, feeding it to the clock unit too. By default, this is using an internal, very inaccurate (+/- 30%) oscillator with a divider to make it roughly around 32kHz. This is however quite impractical for the RTC, since our time will not be tracked properly. Since this oscillator is an input of the main clock unit, and since that clock unit will be probed using CLK_OF_DECLARE, we have to use it as well, leading to a two stage probe: one to enable the clock, the other one to enable the RTC. There is also a slight change in the binding that is required (and should have been from the beginning), since we'll need a phandle to the external oscillator used on that board. We support the old binding by not allowing to switch to the external oscillator and only using the internal one (which was the previous behaviour) in the case where we're missing that phandle. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-01rtc: sun6i: Switch to the external oscillatorMaxime Ripard1-0/+6
The RTC is clocked from either an internal, imprecise, oscillator or an external one, which is usually much more accurate. The difference perceived between the time elapsed and the time reported by the RTC is in a 10% scale, which prevents the RTC from being useful at all. Fortunately, the external oscillator is reported to be mandatory in the Allwinner datasheet, so we can just switch to it. Cc: stable@vger.kernel.org Fixes: 9765d2d94309 ("rtc: sun6i: Add sun6i RTC driver") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-01rtc: sun6i: Add some lockingMaxime Ripard1-2/+15
Some registers have a read-modify-write access pattern that are not atomic. Add some locking to prevent from concurrent accesses. Cc: stable@vger.kernel.org Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-27rtc: jz4740: make the driver buildable as a module againAlexandre Belloni2-3/+14
By using kernel_halt() instead of machine_halt(), we can make the driver build as a module. However, jz4740 platforms not loading this module will not be able to power off. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Revert "rtc: jz4740: make the driver builtin only" This reverts commit b9168c539c0b2de756aaffd380384dbde8adbe07.
2017-01-26pinctrl: Widen the generic pinconf argument from 16 to 24 bitsMika Westerberg1-1/+1
The current pinconf packed format allows only 16-bit argument limiting the maximum value 65535. For most types this is enough. However, debounce time can be in range of hundreths of milliseconds in case of mechanical switches so we cannot represent the worst case using the current format. In order to support larger values change the packed format so that the lower 8 bits are used as type which leaves 24 bits for the argument. This allows representing values up to 16777215 and debounce times up to 16 seconds. We also convert the existing users to use 32-bit integer when extracting argument from the packed configuration value. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-24rtc: sun6i: Disable the build as a moduleMaxime Ripard2-7/+2
Since we have to provide the clock very early on, the RTC driver cannot be built as a module. Make sure that won't happen. Cc: stable@vger.kernel.org Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-24rtc: gemini: Add device tree probingLinus Walleij1-0/+7
This adds bindings and simple probing for the Cortina Systems Gemini SoC RTC. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-23rtc: stm32: fix comparison warningsAmelie Delaunay1-3/+3
This patches fixes comparison between signed and unsigned values as it could produce an incorrect result when the signed value is converted to unsigned: drivers/rtc/rtc-stm32.c: In function 'stm32_rtc_valid_alrm': drivers/rtc/rtc-stm32.c:404:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if ((((tm->tm_year > cur_year) && ... It also fixes comparison always true or false due to the fact that unsigned value is compared against zero with >= or <: drivers/rtc/rtc-stm32.c: In function 'stm32_rtc_init': drivers/rtc/rtc-stm32.c:514:35: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] for (pred_a = pred_a_max; pred_a >= 0; pred_a-- ) { drivers/rtc/rtc-stm32.c:530:44: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] (rate - ((pred_a + 1) * (pred_s + 1)) < 0) ? Fixes: 4e64350f42e2 ("rtc: add STM32 RTC driver") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-23rtc: stm32: use 0 instead of ~PWR_CR_DBP in regmap_update_bitsAmelie Delaunay1-2/+2
Using the ~ operator on a BIT() constant results in a large 'unsigned long' constant that won't fit into an 'unsigned int' function argument on 64-bit architectures, resulting in a harmless build warning in x86 allmodconfig: drivers/rtc/rtc-stm32.c: In function 'stm32_rtc_probe': drivers/rtc/rtc-stm32.c:651:51: error: large integer implicitly truncated to unsigned type [-Werror=overflow] regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, ~PWR_CR_DBP); As PWR_CR_DBP mask prevents other bits to be cleared, replace all ~PWR_CR_DBP by 0. Fixes: 4e64350f42e2 ("rtc: add STM32 RTC driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-23rtc: tegra: Implement clock handlingThierry Reding1-2/+26
Accessing the registers of the RTC block on Tegra requires the module clock to be enabled. This only works because the RTC module clock will be enabled by default during early boot. However, because the clock is unused, the CCF will disable it at late_init time. This causes the RTC to become unusable afterwards. This can easily be reproduced by trying to use the RTC: $ hwclock --rtc /dev/rtc1 This will hang the system. I ran into this by following up on a report by Martin Michlmayr that reboot wasn't working on Tegra210 systems. It turns out that the rtc-tegra driver's ->shutdown() implementation will hang the CPU, because of the disabled clock, before the system can be rebooted. What confused me for a while is that the same driver is used on prior Tegra generations where the hang can not be observed. However, as Peter De Schrijver pointed out, this is because on 32-bit Tegra chips the RTC clock is enabled by the tegra20_timer.c clocksource driver, which uses the RTC to provide a persistent clock. This code is never enabled on 64-bit Tegra because the persistent clock infrastructure does not exist on 64-bit ARM. The proper fix for this is to add proper clock handling to the RTC driver in order to ensure that the clock is enabled when the driver requires it. All device trees contain the clock already, therefore no additional changes are required. Reported-by: Martin Michlmayr <tbm@cyrius.com> Acked-By Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-13rtc: tegra: Sort includes alphabeticallyThierry Reding1-6/+7
The ordering of includes is currently completely arbitrary, making it impossible to decide where to put new includes. Remove the dilemma by sort the include list alphabetically. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-13rtc: stm32: fix building without CONFIG_OFArnd Bergmann1-2/+0
The new driver has a stray #ifdef in it that causes a build error: drivers/rtc/rtc-stm32.c:718:21: error: 'stm32_rtc_of_match' undeclared here (not in a function); did you mean 'stm32_rtc_pm_ops'? As the #ifdef serves no purpose here, let's just remove it. Fixes: 4e64350f42e2 ("rtc: add STM32 RTC driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-13rtc: stm32: remove __exit annotation on remove callbackArnd Bergmann1-1/+1
The remove function can be called at runtime for a manual 'unbind' operation and must not be left out from a built-in driver, as kbuild complains: `stm32_rtc_remove' referenced in section `.data.stm32_rtc_driver' of drivers/rtc/rtc-stm32.o: defined in discarded section `.exit.text' of drivers/rtc/rtc-stm32.o This removes the extraneous annotation. Fixes: 4e64350f42e2 ("rtc: add STM32 RTC driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-13rtc: add STM32 RTC driverAmelie Delaunay3-0/+739
This patch adds support for the STM32 RTC. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-12rtc: armada38x: make struct rtc_class_ops constRussell King1-7/+17
Armada38x wants to modify its rtc_class_ops to remove the interrupt handling when there is no usable interrupt, but this means we leave function pointers in writable memory. Since rtc_class_ops is small, arrange to have two instances, one for when we have interrupts, and one for when we have none, both marked const. This allows the compiler to place them in read-only memory, which is better than placing them in __ro_after_init. Thanks to Bhumika Goyal <bhumirks@gmail.com> for pointing out that the structure was writable and submitting a patch to add __ro_after_init. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-11rtc: constify rtc_class_ops structuresBhumika Goyal7-7/+7
Declare rtc_class_ops structures as const as they are only passed as an argument to the function devm_rtc_device_register. This argument is of type const struct rtc_class_ops *, so rtc_class_ops structures having this property can be declared const. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct rtc_class_ops i@p = {...}; @ok1@ identifier r1.i; position p; @@ devm_rtc_device_register(...,&i@p,...) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct rtc_class_ops i; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-11rtc: imxdi: use the security violation interruptMartin Kaiser1-9/+22
The DryIce chipset has a dedicated security violation interrupt that is triggered for security violations (if configured to do so). According to the publicly available imx258 reference manual, irq 56 is used for this interrupt. If an irq number is provided for the security violation interrupt, install the same handler that we're already using for the "normal" interrupt. imxdi->irq is used only in the probe function, make it a local variable. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-11rtc: mcp795: add alarm support.Emil Bartczak1-1/+170
This patch adds alarm support. This allows to configure the chip to generate an interrupt when the alarm matches current time value. Alarm can be programmed up to one year in the future and is accurate to the second. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-11rtc: mcp795: Add support for weekday.Emil Bartczak1-5/+7
This patch adds support for saving/loading weekday value from the chip. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-11rtc: armada38x: Follow the new recommendation for errata implementationGregory CLEMENT1-23/+94
According to RES-3124064: The device supports CPU write and read access to the RTC time register. However, due to this restriction, read and write from/to internal RTC register may fail. Workaround: General setup: 1. Configure the RTC Mbus Bridge Timing Control register (offset 0x184A0) to value 0xFD4D4FFF Write RTC WRCLK Period to its maximum value (0x3FF) Write RTC WRCLK setup to 0x29 Write RTC WRCLK High Time to 0x53 (default value) Write RTC Read Output Delay to its maximum value (0x1F) Mbus - Read All Byte Enable to 0x1 (default value) 2. Configure the RTC Test Configuration Register (offset 0xA381C) bit3 to '1' (Reserved, Marvell internal) For any RTC register read operation: 1. Read the requested register 100 times. 2. Find the result that appears most frequently and use this result as the correct value. For any RTC register write operation: 1. Issue two dummy writes of 0x0 to the RTC Status register (offset 0xA3800). 2. Write the time to the RTC Time register (offset 0xA380C). This patch is based on the work of Shaker Daibes Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10rtc: tps65910: use 'unsigned int' instead of 'unsigned' in argumentsVesa Jääskeläinen1-1/+2
Fixes checkpatch.pl warning: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10rtc: tps65910: Add RTC calibration supportVesa Jääskeläinen1-0/+143
Texas Instrument's TPS65910 has support for compensating RTC crystal inaccuracies. When enabled every hour RTC counter value will be compensated with two's complement value. Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-05rtc: rx8010: change lock mechanismFabien Lahoudere1-21/+3
Remove spinlock and use the "rtc->ops_lock" from RTC subsystem instead. spin_lock_irqsave() is not needed here because we do not have hard IRQs. This patch fixes the following issue: root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc root@GE004097290448 b850v3:~# hwclock --systohc [ 82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855 [ 82.113660] lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1 [ 82.121329] CPU: 0 PID: 855 Comm: hwclock Not tainted 4.8.0-00042-g09d5410-dirty #20 [ 82.129078] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 82.135609] Backtrace: [ 82.138090] [<8010d378>] (dump_backtrace) from [<8010d5c0>] (show_stack+0x20/0x24) [ 82.145664] r7:ec936000 r6:600a0013 r5:00000000 r4:81031680 [ 82.151402] [<8010d5a0>] (show_stack) from [<80401518>] (dump_stack+0xb4/0xe8) [ 82.158636] [<80401464>] (dump_stack) from [<8017b8b0>] (spin_dump+0x84/0xcc) [ 82.165775] r10:00000000 r9:ec936000 r8:81056090 r7:600a0013 r6:edb4899c r5:edb4899c [ 82.173691] r4:e5033e00 r3:00000000 [ 82.177308] [<8017b82c>] (spin_dump) from [<8017bcb0>] (do_raw_spin_unlock+0x108/0x130) [ 82.185314] r5:edb4899c r4:edb4899c [ 82.188938] [<8017bba8>] (do_raw_spin_unlock) from [<8094b93c>] (_raw_spin_unlock_irqrestore+0x34/0x54) [ 82.198333] r5:edb4899c r4:600a0013 [ 82.201953] [<8094b908>] (_raw_spin_unlock_irqrestore) from [<8065b090>] (rx8010_set_time+0x14c/0x188) [ 82.211261] r5:00000020 r4:edb48990 [ 82.214882] [<8065af44>] (rx8010_set_time) from [<80653fe4>] (rtc_set_time+0x70/0x104) [ 82.222801] r7:00000051 r6:edb39da0 r5:edb39c00 r4:ec937e8c [ 82.228535] [<80653f74>] (rtc_set_time) from [<80655774>] (rtc_dev_ioctl+0x3c4/0x674) [ 82.236368] r7:00000051 r6:7ecf1b74 r5:00000000 r4:edb39c00 [ 82.242106] [<806553b0>] (rtc_dev_ioctl) from [<80284034>] (do_vfs_ioctl+0xa4/0xa6c) [ 82.249851] r8:00000003 r7:80284a40 r6:ed1e9c80 r5:edb44e60 r4:7ecf1b74 [ 82.256642] [<80283f90>] (do_vfs_ioctl) from [<80284a40>] (SyS_ioctl+0x44/0x6c) [ 82.263953] r10:00000000 r9:ec936000 r8:7ecf1b74 r7:4024700a r6:ed1e9c80 r5:00000003 [ 82.271869] r4:ed1e9c80 [ 82.274432] [<802849fc>] (SyS_ioctl) from [<80108520>] (ret_fast_syscall+0x0/0x1c) [ 82.282005] r9:ec936000 r8:801086c4 r7:00000036 r6:00000000 r5:00000003 r4:0008e1bc root@GE004097290448 b850v3:~# Message from syslogd@GE004097290448 at Dec 3 11:17:08 ... kernel:[ 82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855 Message from syslogd@GE004097290448 at Dec 3 11:17:08 ... kernel:[ 82.113660] lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1 hwclock --systohc root@GE004097290448 b850v3:~# Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner1-4/+4
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25ktime: Get rid of the unionThomas Gleixner1-4/+4
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-19Merge tag 'rtc-4.10' of ↵Linus Torvalds14-159/+975
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - non-modular drivers are now explicitly non-modular New driver: - Epson Toyocom rtc-7301sf/dg Drivers: - cmos: reject unsupported alarm values wrt the RTC capabilities - ds1307: ACPI support - jz4740: DT support, jz4780 handling, can now be used as a system power controller - mcp795: many fixes, in particular proper month handling - twl: driver is now DT only" * tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits) rtc: mcp795: Fix whitespace and indentation. rtc: mcp795: Prefer using the BIT() macro. rtc: mcp795: fix month write resetting date to 1. rtc: mcp795: fix time range difference between linux and RTC chip. rtc: mcp795: fix bitmask value for leap year (LP). rtc: mcp795: use bcd2bin/bin2bcd. rtc: add support for EPSON TOYOCOM RTC-7301SF/DG rtc: ds1307: Add ACPI support rtc: imxdi: (trivial) fix a typo rtc: ds1374: Merge conditional + WARN_ON() rtc: twl: make driver DT only rtc: twl: kill static variables rtc: fix typos in Kconfig rtc: jz4740: make the driver builtin only rtc: jz4740: remove unused EXPORT_SYMBOL Documentation: bindings: fix twl-rtc documentation rtc: Enable compile testing for Maxim and Samsung drivers MIPS: jz4740: Remove obsolete code MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree ...
2016-12-19rtc: mcp795: Fix whitespace and indentation.Emil Bartczak1-6/+6
Fix whitespace and indentation errors and the following checkpatch warnings: - line 15: Block comments use a trailing */ on a separate line - line 256: Line over 80 characters No code change. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: mcp795: Prefer using the BIT() macro.Emil Bartczak1-2/+2
This patch doesn't change the code but replaces all bitmask values with the BIT(x) macro. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: mcp795: fix month write resetting date to 1.Emil Bartczak1-5/+81
According to Microchip errata some combinations of date and month values may result in the date being reset to 1, even if the date is also written with the month (for example 31-07 or 31-08). As a workaround avoid writing date and month values within the same Write command. Instead, terminate the Write command after loading the date and begin a new command to write the month. In addition, disable the oscillator before loading the new values. This is done by ensuring both the ST and EXTOSC bits are cleared and waiting for the OSCON bit to clear. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: mcp795: fix time range difference between linux and RTC chip.Emil Bartczak1-2/+2
In linux rtc_time struct, tm_mon range is 0~11, while in RTC HW REG, month range is 1~12. This patch adjusts difference of them. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: mcp795: fix bitmask value for leap year (LP).Emil Bartczak1-1/+2
According the datasheet the leap year is a fifth bit in month register. Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: mcp795: use bcd2bin/bin2bcd.Emil Bartczak1-12/+13
Change rtc-mcp795.c to use the bcd2bin/bin2bcd functions. This change fixes the wrong conversion of month value from binary to BCD (missing right shift operation for 10 month). Signed-off-by: Emil Bartczak <emilbart@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: add support for EPSON TOYOCOM RTC-7301SF/DGAkinobu Mita3-0/+465
This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel interface compatible with SRAM. This driver supports basic clock, calendar and alarm functionality. Tested with Microblaze linux running on Artix7 FPGA board with my own custom IP for RTC-7301. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19rtc: ds1307: Add ACPI supportTin Huynh1-9/+43
This patch enables ACPI support for rtc-ds1307 driver. Signed-off-by: Tin Huynh <tnhuynh@apm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The time/timekeeping/timer folks deliver with this update: - Fix a reintroduced signed/unsigned issue and cleanup the whole signed/unsigned mess in the timekeeping core so this wont happen accidentaly again. - Add a new trace clock based on boot time - Prevent injection of random sleep times when PM tracing abuses the RTC for storage - Make posix timers configurable for real tiny systems - Add tracepoints for the alarm timer subsystem so timer based suspend wakeups can be instrumented - The usual pile of fixes and updates to core and drivers" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) timekeeping: Use mul_u64_u32_shr() instead of open coding it timekeeping: Get rid of pointless typecasts timekeeping: Make the conversion call chain consistently unsigned timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion alarmtimer: Add tracepoints for alarm timers trace: Update documentation for mono, mono_raw and boot clock trace: Add an option for boot clock as trace clock timekeeping: Add a fast and NMI safe boot clock timekeeping/clocksource_cyc2ns: Document intended range limitation timekeeping: Ignore the bogus sleep time if pm_trace is enabled selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous" clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map() arm64: dts: rockchip: Arch counter doesn't tick in system suspend clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend posix-timers: Make them configurable posix_cpu_timers: Move the add_device_randomness() call to a proper place timer: Move sys_alarm from timer.c to itimer.c ptp_clock: Allow for it to be optional Kconfig: Regenerate *.c_shipped files after previous changes ...
2016-12-07rtc: imxdi: (trivial) fix a typoMartin Kaiser1-1/+1
Fix a typo Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-07rtc: ds1374: Merge conditional + WARN_ON()Srikant Ritolia1-3/+1
WARN_ON does both these things in one statement. Using a better pattern with WARN_ON(). Signed-off-by: Srikant Ritolia <s.ritolia@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-30rtc: twl: make driver DT onlyNicolae Rosia2-5/+8
Since there are no platform based users and all users of this code are TI OMAP-based which is DT only, it makes sense to remove unused code. Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-30rtc: twl: kill static variablesNicolae Rosia1-76/+114
The current code uses static variables which prevent the use of multiple rtc twl instances. We also make it clear that this driver supports only TWL4030 and TWL6030 classes. Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-29timekeeping: Ignore the bogus sleep time if pm_trace is enabledChen Yu1-0/+7
Power management suspend/resume tracing (ab)uses the RTC to store suspend/resume information persistently. As a consequence the RTC value is clobbered when timekeeping is resumed and tries to inject the sleep time. Commit a4f8f6667f09 ("timekeeping: Cap array access in timekeeping_debug") plugged a out of bounds array access in the timekeeping debug code which was caused by the clobbered RTC value, but we still use the clobbered RTC value for sleep time injection into kernel timekeeping, which will result in random adjustments depending on the stored "hash" value. To prevent this keep track of the RTC clobbering and ignore the invalid RTC timestamp at resume. If the system resumed successfully clear the flag, which marks the RTC as unusable, warn the user about the RTC clobber and recommend to adjust the RTC with 'ntpdate' or 'rdate'. [jstultz: Fixed up pr_warn formating, and implemented suggestions from Ingo] [ tglx: Rewrote changelog ] Originally-from: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Xunlei Pang <xlpang@redhat.com> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1480372524-15181-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09rtc: fix typos in KconfigAlexandre Belloni1-2/+2
s/buillt/built/g Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-09rtc: jz4740: make the driver builtin onlyAlexandre Belloni2-13/+2
Since the driver is now calling machine_halt() that is not exported, it has to be built in the kernel. Building it as a module will fail at linking time. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-09rtc: jz4740: remove unused EXPORT_SYMBOLAlexandre Belloni1-2/+1
jz4740_rtc_poweroff() is only called from the driver, stop exporting it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-05rtc: Enable compile testing for Maxim and Samsung driversKrzysztof Kozlowski1-3/+4
max8907, max77686 and s5m RTC drivers can be compile tested to increase build coverage. The s5m-rtc uses REGMAP_IRQ so add this as explicit dependency. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-05rtc: jz4740: Add support for acting as the system power controllerPaul Cercueil1-0/+81
The 'system-power-controller' singleton entry can be used in the devicetree node of the jz4740-rtc driver to specify that the driver is granted the right to power off the system through the registers of the RTC unit. See the documentation for more details: Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-05rtc: jz4740: Add support for devicetreePaul Cercueil1-1/+15
See Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt for a description of the bindings. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-05rtc: jz4740: Add support for the RTC in the jz4780 SoCPaul Cercueil2-5/+51
The RTC unit present in the JZ4780 works mostly the same as the one in the JZ4740. The major difference is that register writes need to be explicitly enabled, by writing a magic code (0xA55A) to a "write enable" register before each access. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-05rtc: sparc: make sun4v explicitly non-modularPaul Gortmaker1-6/+4
The Kconfig currently controlling compilation of this code is: drivers/rtc/Kconfig:config RTC_DRV_SUN4V drivers/rtc/Kconfig: bool "SUN4V Hypervisor RTC" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: rtc-linux@googlegroups.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-26 07:26:32 +0300