summaryrefslogtreecommitdiff
path: root/drivers/regulator/pfuze100-regulator.c
AgeCommit message (Collapse)AuthorFilesLines
2016-06-06regulator: pfuze100-regulator: Adjust MODULE_DESCRIPTION()Fabio Estevam1-1/+1
Adjust the MODULE_DESCRIPTION() text to also include the PFUZE3000 as a supported device. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-06regulator: pfuze100-regulator: Remove global variableFabio Estevam1-7/+6
We should better not use a global 'struct pfuze_regulator' variable, as this could cause problems if multiple regulator chips are used. Place it inside the private struct instead. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-30Merge remote-tracking branches 'regulator/topic/mt6311', ↵Mark Brown1-2/+0
'regulator/topic/ocp', 'regulator/topic/owner', 'regulator/topic/pfuze100' and 'regulator/topic/pwm' into regulator-next
2015-08-29regulator: pfuze100: Remove unnecessary MODULE_ALIAS()Javier Martinez Canillas1-1/+0
The driver has a I2C device id table that is used to create the modaliases and also "pfuze100-regulator" is not a supported I2C id, so is never used. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-14regulator: drivers: Drop owner assignment from i2c_driverKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-09regulator: pfuze100-regulator: add pfuze3000 supportRobin Gong1-9/+125
Add pfuze3000 chip support. Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-05-27regulator: pfuze100: Support enable/disable for fixed regulatorAxel Lin1-0/+3
Current code has .enable_reg and .enable_mask settings, but the implementation for corresponding callbacks are missing. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Robin Gong <b38343@freescale.com> Acked-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26regulator: pfuze100: Don't allocate an invalid gpioSean Cross1-0/+1
Previously, the PFUZE100 would try to allocate gpio0 io0 because config.ena_gpio defaults to 0, which can be a valid GPIO. To prevent this from happening, set this parameter to -EINVAL. Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26regulator: pfuze100: Support SWB enable/disableSean Cross1-0/+4
The SWB regulators have the ability to be turned on and off. Add enable/disable support for these regulators. Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-26Merge remote-tracking branches 'regulator/topic/max8973', ↵Mark Brown1-55/+147
'regulator/topic/max8997', 'regulator/topic/max8998', 'regulator/topic/mc13xxx', 'regulator/topic/pfuze100', 'regulator/topic/rc5t583' and 'regulator/topic/s2mps11' into regulator-next
2014-03-06regulator: pfuze100: Add PFUZE200 support to Kconfig and module descriptionAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04regulator: pfuze100: Add terminate entry for [i2c|of]_device_id tablesAxel Lin1-3/+5
Also remove PFUZE_NUM to avoid below build warnings: CC [M] drivers/regulator/pfuze100-regulator.o drivers/regulator/pfuze100-regulator.c:86:2: warning: excess elements in array initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:86:2: warning: (near initialization for 'pfuze_device_id') [enabled by default] drivers/regulator/pfuze100-regulator.c:93:2: warning: excess elements in array initializer [enabled by default] drivers/regulator/pfuze100-regulator.c:93:2: warning: (near initialization for 'pfuze_dt_ids') [enabled by default] Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04regulator: pfuze100: add pfuze200 supportRobin Gong1-53/+143
support pfuze200 chip which remove SW1C and SW4 based on pfuze100. Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23pfuze100-regulator: Return error on of_node_get() failureFabio Estevam1-1/+1
If of_node_get() fails, we should return an error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-19pfuze100-regulator: Fix of_node_get() parameterFabio Estevam1-1/+1
Since commit d7857c42 (regulator: pfuze100: Use of_get_child_by_name) we get the following probe failure: pfuze100-regulator 1-0008: Full layer: 1, Metal layer: 0 pfuze100-regulator 1-0008: FAB: 0, FIN: 0 pfuze100-regulator 1-0008: regulators node not found pfuze100-regulator: probe of 1-0008 failed with error -22 Now that of_get_child_by_name() is used we should adjust the device_node pointer 'np' to not get the parent node anymore. Suggested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-15regulator: pfuze100: Use of_get_child_by_nameSachin Kamat1-1/+1
of_find_node_by_name walks the allnodes list, and can thus walk outside of the parent node. Use of_get_child_by_name instead. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03regulator: Make use of rdev_get_id() function where possible.Thiago Farina1-1/+1
Signed-off-by: Thiago Farina <tfarina@chromium.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23Merge remote-tracking branches 'regulator/topic/db8500', ↵Mark Brown1-25/+14
'regulator/topic/gpio', 'regulator/topic/lp3971', 'regulator/topic/lp3972', 'regulator/topic/max14577', 'regulator/topic/max77693', 'regulator/topic/mc13892', 'regulator/topic/pcf50633' and 'regulator/topic/pfuze100' into regulator-linus
2014-01-23regulator: pfuze100-regulator: Improve dev_info() messageFabio Estevam1-1/+1
'lay' is not very meaningful, so use it 'layer' instead to let the dev_info() clearer. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-15regulator: pfuze100-regulator: Fix some checkpatch complaintsFabio Estevam1-8/+11
Fix the following checkpatch error and warning: ERROR: switch and case should be at the same indent #311: FILE: drivers/regulator/pfuze100-regulator.c:311: + switch (value & 0x0f) { [...] + case 0x8: [...] + case 0x0: [...] + default: WARNING: line over 80 characters #312: FILE: drivers/regulator/pfuze100-regulator.c:312: + /* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-15Merge tag 'v3.13-rc4' into regulator-pfuze100Mark Brown1-4/+10
Linux 3.13-rc4
2013-12-09regulator: pfuze100: use devm_regulator_register()Jingoo Han1-17/+3
Use devm_regulator_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09regulator: pfuze100: allow misprogrammed IDTim Harvey1-3/+9
prior to week 08 of 2013 Freescale misprogrammed between 1 and 3% of PFUZE1000 parts with a ID=0x8 instead of the expected ID=0x0 Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-12-09regulator: pfuze100: Fix address of FABIDAxel Lin1-1/+1
According to the datasheet, the address of FABID is 0x4. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-08-02regulator: pfuze100: Fix off-by-one for max_register settingAxel Lin1-1/+1
max_register should be register count - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31regulator: pfuze100: Simplify pfuze100_set_ramp_delay implementationAxel Lin1-16/+5
Simplify the equation to calculate ramp_delay. Below equations are equivalent: ramp_delay = 25000 / (2 * ramp_delay); ramp_delay = 50000 / (4 * ramp_delay); ramp_delay = 25000 / (2 * ramp_delay); ramp_delay = 12500 / ramp_delay; So we don't need to read BIT6 of rdev->desc->vsel_reg for applying different equations. Also use rdev->desc->vsel_reg instead of run-time calculate register address. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30regulator: pfuze100: Fix n_voltages setting for SW2~SW4 with high bit setAxel Lin1-8/+8
Current code adjust min_uV and uV_step but missed adjusting the n_voltages setting. When BIT6 is clear: n_voltages = (1975000 - 400000) / 25000 + 1 = 64 When BIT6 is set: n_voltages = (3300000 - 800000) / 50000 + 1 = 51 The n_voltages needs update because when BIT6 is set 0x73 ~ 0x7f are reserved. When using regulator_list_voltage_linear, the n_voltages does matter here because wrong n_voltages setting make the equation return wrong result. e.g. if selector is 63, regulator_list_voltage_linear returns 800000 + (50000 * 63) = 4000000 It should return -EINVAL if the selector is in the range of 51 ~ 63. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29regulator: pfuze100: Use regulator_map_voltage_ascendAxel Lin1-0/+1
All table based voltage list have ascendant order. Use regulator_map_voltage_ascend for them. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29regulator: pfuze100: Fix module alias prefixAxel Lin1-1/+1
i2c drivers use "i2c:" prefix for module alias. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29regulator: pfuze100: Use i2c_[set|get]_clientdataAxel Lin1-2/+2
Since this is a i2c driver, use i2c_[set|get]_clientdata instead of dev_[set|get]_drvdata. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29regulator: pfuze100: add MODULE_LICENSE() in pfuze100 driverRobin Gong1-0/+1
Fix building error on x86_64 and i386: WARNING: modpost: missing MODULE_LICENSE() in drivers/regulator/pfuze100-regulator.o Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-26regulator:pfuze100: fix build warning and correct the binding docRobin Gong1-1/+1
fix building warning and correct the binding doc Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-25regulator: pfuze100: add pfuze100 regulator driverRobin Gong1-0/+454
Add pfuze100 regulator driver. Signed-off-by: Robin Gong <b38343@freescale.com> Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 13:38:58 +0300