summaryrefslogtreecommitdiff
path: root/drivers/regulator/anatop-regulator.c
AgeCommit message (Collapse)AuthorFilesLines
2018-05-24regulator: anatop: Switch to SPDX identifierFabio Estevam1-19/+3
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-30Merge remote-tracking branches 'regulator/topic/anatop', ↵Mark Brown1-4/+15
'regulator/topic/arizona', 'regulator/topic/bd9571mvw-m' and 'regulator/topic/const' into regulator-next
2017-04-14regulator: anatop: make sure regulator name is properly definedDong Aisheng1-2/+5
For anatop regulator we must have a name accordingly. Make sure the name is properly checked before using it to avoid a possible kernel NULL point crash. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-13regulator: anatop: set default voltage selector for pcieDong Aisheng1-0/+5
Set the initial voltage selector for vddpcie in case it's disabled by default. This fixes the below warning: 20c8000.anatop:regulator-vddpcie: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddpcie failed with error -22 Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Robin Gong <yibin.gong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11regulator: anatop: remove unneeded name field of struct anatop_regulatorDong Aisheng1-4/+3
sreg->name is only used as an intermediate assign of rdesc->name, plus another strcmp. Since we already have rdesc->name, no need it anymore. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11regulator: anatop: use of_property_read_string to read the nameDong Aisheng1-1/+2
sreg->name is a string, so use a more proper api to read back the string instead of of_get_property. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11regulator: anatop: check return value of of_get_regulator_init_dataDong Aisheng1-0/+3
Should check the return value of of_get_regulator_init_data before using it. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-23regulator: anatop: Add support for "anatop-enable-bit"Andrey Smirnov1-0/+12
Add code to support support for "anatop-enable-bit" device-tree property. This property translates to LINREG_ENABLE bit in real hardware and is present on 1p1, 2p5 and 3p0 regulators on i.MX6 and 1p0d regulator on i.MX7. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-17regulator: anatop: allow regulator to be in bypass modeMika Båtsman1-1/+1
Bypass support was added in commit d38018f2019c ("regulator: anatop: Add bypass support to digital LDOs"). A check for valid voltage selectors was added in commit da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector") but it also discards all regulators that are in bypass mode. Add check for the bypass setting. Errors below were seen on a Variscite mx6 board. anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22 anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22 Fixes: da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector") Signed-off-by: Mika Båtsman <mbatsman@mvista.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-04Merge remote-tracking branches 'regulator/topic/act8865', ↵Mark Brown1-0/+3
'regulator/topic/anatop', 'regulator/topic/arizona', 'regulator/topic/axp20x' and 'regulator/topic/bcm590xx' into regulator-next
2015-10-16regulator: i.MX anatop: Allow supply regulatorSascha Hauer1-0/+3
The anatop regulators are SoC internal LDO regulators usually supplied by an external PMIC. This patch adds support for specifying the supply from the device tree using the vin-supply property. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-19regulator: anatop: Fix module autoload for OF platform driverLuis de Bethencourt1-0/+1
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-05Merge remote-tracking branches 'regulator/topic/max77686', ↵Mark Brown1-2/+3
'regulator/topic/max77693', 'regulator/topic/max77802', 'regulator/topic/power-off' and 'regulator/topic/rk808' into regulator-next
2014-11-26regulator: of: Add regulator desc param to of_get_regulator_init_data()Javier Martinez Canillas1-2/+3
The of_get_regulator_init_data() function is used to extract the regulator init_data but information on how to extract certain data is defined in the static regulator descriptor (e.g: how to map the hardware operating modes). Add a const struct regulator_desc * parameter to the function signature so the parsing logic could use the information in the struct regulator_desc. of_get_regulator_init_data() relies on of_get_regulation_constraints() to actually extract the init_data so it has to pass the struct regulator_desc but that is modified on a later patch. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20regulator: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20regulator: anatop: Fail on invalid voltage selectorMarkus Pargmann1-0/+5
A '0' voltage selector is invalid and can't be used with this driver. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20regulator: anatop: Set default voltage selector for vddpuMarkus Pargmann1-0/+8
The code reads the default voltage selector from its register. If the bootloader disables the regulator, the default voltage selector will be 0 which results in faulty behaviour of this regulator driver. This patch sets a default voltage selector for vddpu if it is not set in the register. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-05-07regulator: anatop: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-18regulator: anatop: Remove checking control_reg in [set|get]_voltage_selAxel Lin1-23/+2
Remove checking control_reg in [set|get]_voltage_sel and then convert to use regulator_[set|get]_voltage_sel_regmap for [set|get]_voltage_sel callbacks. The anatop-reg-offset property is a required property rather than optional property. So the question is what is the meaning of setting anatop-reg-offset to 0? If 0 is a valid setting for anatop-reg-offset and it has special meaning, we had better document it in the binding document. Otherwise, remove the testing for control_reg in the driver. No anatop voltage regulator node in the dts files set anatop-reg-offset to 0. So I think it's safe to remove testing if control_reg is 0. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-15regulator: anatop: Add bypass support to digital LDOsPhilipp Zabel1-3/+42
The ARM, PU, and SOC LDOs in the i.MX6 PMU can operate in bypass mode. This allows to use external switching regulators for cpu voltage scaling. Since bypass and power gating modes are not configured with their own bits, but via the voltage target bitfield, store bypass state to be restored when reenabling the regulator. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-15regulator: anatop: Add power gating support to digital LDOsPhilipp Zabel1-2/+74
The ARM, PU, and SOC LDOs in the i.MX6 PMU can completely gate their power output. Since power gating is configured by writing zero to the voltage target bitfield,, store a copy of the voltage selector to be restored when reenabling the regulator. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08regulator: anatop-regulator: Remove unneeded memset()Fabio Estevam1-1/+0
sreg is allocated via devm_kzalloc(), so there is no need to explicitly zero out rdesc via memset(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06regulator: anatop-regulator: Remove unneeded kstrdup()Fabio Estevam1-26/+8
We can simply pass the regulator name via of_get_property() instead of making a copy via kstrdup(). This leads to some code simplification. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31regulator: anatop-regulator: Add MODULE_ALIAS()Fabio Estevam1-0/+1
Provide a MODULE_ALIAS() entry to the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-24Merge remote-tracking branch 'regulator/topic/anatop' into regulator-nextMark Brown1-2/+2
2013-10-15regulator: anatop: Fix checkpatch issueJingoo Han1-2/+2
Fix the following checkpatch warning. WARNING: quoted string split across lines Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17regulator: anatop-regulator: Use devm_regulator_registerSachin Kamat1-2/+1
devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-02-08regulator: anatop: improve precision of delay timeShawn Guo1-2/+2
For cpufreq example, it takes 13 steps (25 mV for one step) to increase vddcore from 0.95 V to 1.275 V, and the time of 64 clock cycles at 24 MHz for one step is ~2.67 uS, so the total delay time would be ~34.71 uS. But the current calculation in the driver gives 39 uS. Change the formula to have the addition of 1 be the last step, so that we can get a more precise delay time. For example above, the new formula will give 35 uS. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-31regulators: anatop: add set_voltage_time_sel interfaceAnson Huang1-0/+41
some of anatop's regulators(cpu, vddpu and vddsoc) have register settings about LDO's step time, which will impact the LDO ramp up speed, need to use set_voltage_time_sel interface to add necessary delay everytime LDOs' voltage is increased. offset 0x170: bit [24-25]: cpu bit [26-27]: vddpu bit [28-29]: vddsoc field definition: 0'b00: 64 cycles of 24M clock; 0'b01: 128 cycles of 24M clock; 0'b02: 256 cycles of 24M clock; 0'b03: 512 cycles of 24M clock; Signed-off-by: Anson Huang <b20788@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04Drivers: regulator: remove __dev* attributes.Greg Kroah-Hartman1-1/+1
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-10Merge remote-tracking branch 'regulator/topic/min' into regulator-nextMark Brown1-19/+9
2012-12-10regulator: anatop: Use regulator_[get|set]_voltage_sel_regmapAxel Lin1-15/+6
Call regulator_[get|set]_voltage_sel_regmap instead of open code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Ying-Chun Liu <paulliu@debian.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10regulator: anatop: Use linear_min_sel with linear mappingAxel Lin1-8/+7
By setting linear_min_sel to anatop_reg->min_bit_val, we can avoid adjust the anatop_reg->min_bit_val offset in [set|get]_voltage_sel. With this chance we can refactor this driver to use regulator_[get|set]_voltage_sel_regmap. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Ying-Chun Liu <paulliu@debian.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-05Merge tag 'mfd-3.7-1' of ↵Linus Torvalds1-10/+21
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "MFD bits for the 3.7 merge window. As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family." Fix up various annoying conflicts: the DT and IRQ domain support came in twice and was already in 3.6. And then it was apparently rebased. Guys, DON'T REBASE! * tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits) ARM: dts: Enable 88pm860x pmic mfd: 88pm860x: Move gpadc init into touch mfd: 88pm860x: Device tree support mfd: 88pm860x: Use irqdomain mfd: smsc: Add support for smsc gpio io/keypad driver backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe mfd: DA9055 core driver mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list mfd: wm5110: Add register patches for revision B mfd: wm5110: Disable control interface error report for WM5110 rev B mfd: max8907: Remove regulator-compatible from DT docs backlight: Add TPS65217 WLED driver mfd: Add backlight as subdevice to the tps65217 mfd: Provide the PRCMU with its own IRQ domain mfd: Fix max8907 sparse warning mfd: Add lp8788 mfd driver mfd: dbx500: Provide a more accurate smp_twd clock mfd: rc5t583: Fix warning messages regulator: palmas: Add DT support mfd: palmas: Change regulator defns to better suite DT ...
2012-09-17regulator: anatop-regulator: Convert to use syscon to access anatop registerDong Aisheng1-10/+21
Using syscon to access anatop register. Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-07regulator: anatop: Fix wrong mask used in anatop_get_voltage_selAxel Lin1-2/+3
The mask used in anatop_get_voltage_sel does not match the mask used in anatop_set_voltage_sel. We need to do left shift anatop_reg->vol_bit_shift bits for the correct mask. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25Merge tag 'v3.5-rc4' into regulator-driversMark Brown1-1/+1
Linux 3.5-rc4 contains patches which conflict with some of the development work.
2012-06-11regulator: anatop: Convert to set_voltage_sel and regulator_map_voltage_linearAxel Lin1-23/+6
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: anatop: Use correct __devexit_p annotationAxel Lin1-1/+1
__devexit functions are discarded when CONFIG_HOTPLUG is not set, so the symbol needs to be referenced carefully. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: anatop: Convert to regulator_list_voltage_linear()Axel Lin1-12/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-29Merge tag 'mfd-3.5-1' of ↵Linus Torvalds1-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "Besides the usual cleanups, this one brings: * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton, ST-E's STAX211, Samsung's MAX77693 and TI's LM3533. * Device tree support for the twl6040, tps65910, da9502 and ab8500 drivers. * Fairly big tps56910, ab8500 and db8500 updates. * i2c support for mc13xxx. * Our regular update for the wm8xxx driver from Mark." Fix up various conflicts with other trees, largely due to ab5500 removal etc. * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits) mfd: Fix build break of max77693 by adding REGMAP_I2C option mfd: Fix twl6040 build failure mfd: Fix max77693 build failure mfd: ab8500-core should depend on MFD_DB8500_PRCMU gpio: tps65910: dt: process gpio specific device node info mfd: Remove the parsing of dt info for tps65910 gpio mfd: Save device node parsed platform data for tps65910 sub devices mfd: Add r_select to lm3533 platform data gpio: Add Intel Centerton support to gpio-sch mfd: Emulate active low IRQs as well as active high IRQs for wm831x mfd: Mark two lm3533 zone registers as volatile mfd: Fix return type of lm533 attribute is_visible mfd: Enable Device Tree support in the ab8500-pwm driver mfd: Enable Device Tree support in the ab8500-sysctrl driver mfd: Add support for Device Tree to twl6040 mfd: Register the twl6040 child for the ASoC codec unconditionally mfd: Allocate twl6040 IRQ numbers dynamically mfd: twl6040 code cleanup in interrupt initialization part mfd: Enable ab8500-gpadc driver for Device Tree mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver ...
2012-05-20mfd: Make anatop register accessor more flexible and rename meaningfullyRichard Zhao1-10/+8
- rename to anatop_read_reg and anatop_write_reg - anatop_read_reg directly return reg value - anatop_write_reg write reg with mask Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-12Merge remote-tracking branches 'regulator/topic/core', ↵Mark Brown1-2/+7
'regulator/topic/regmap' and 'regulator/topic/register' into regulator-next
2012-04-10Merge tag 'regulator-3.4' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull a regulator build fix from Mark Brown: "Fix a build warning in the anatop driver for 3.4 This is a trivial rename to stop the build system complaining that we're referencing things we shouldn't be." * tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: anatop: fix 'anatop_regulator' name collision
2012-04-10regulator: Convert anatop to use a struct to pass in regulator runtime ↵Axel Lin1-2/+7
configuration Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-03regulator: anatop: fix 'anatop_regulator' name collisionShawn Guo1-3/+3
There is a name collision between 'struct platform_driver anatop_regulator' and 'struct anatop_regulator', which causes some section mismatch warnings like below. WARNING: vmlinux.o(.data+0x154d4): Section mismatch in reference from the variable anatop_regulator to the function .devinit.text:anatop_regulator_probe() The variable anatop_regulator references the function __devinit anatop_regulator_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Rename 'struct platform_driver anatop_regulator' to 'struct platform_driver anatop_regulator_driver' to fix the warnings. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 21:20:24 +0300