summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/aspeed
AgeCommit message (Collapse)AuthorFilesLines
2020-12-08pinctrl: aspeed: Fix GPIO requests on pass-through banksAndrew Jeffery2-9/+72
Commit 6726fbff19bf ("pinctrl: aspeed: Fix GPI only function problem.") fixes access to GPIO banks T and U on the AST2600. Both banks contain input-only pins and the GPIO pin function is named GPITx and GPIUx respectively. Unfortunately the fix had a negative impact on GPIO banks D and E for the AST2400 and AST2500 where the GPIO pass-through functions take similar "GPI"-style names. The net effect on the older SoCs was that when the GPIO subsystem requested a pin in banks D or E be muxed for GPIO, they were instead muxed for pass-through mode. Mistakenly muxing pass-through mode e.g. breaks booting the host on IBM's Witherspoon (AC922) platform where GPIOE0 is used for FSI. Further exploit the names in the provided expression structure to differentiate pass-through from pin-specific GPIO modes. This follow-up fix gives the expected behaviour for the following tests: Witherspoon BMC (AST2500): 1. Power-on the Witherspoon host 2. Request GPIOD1 be muxed via /sys/class/gpio/export 3. Request GPIOE1 be muxed via /sys/class/gpio/export 4. Request the balls for GPIOs E2 and E3 be muxed as GPIO pass-through ("GPIE2" mode) via a pinctrl hog in the devicetree Rainier BMC (AST2600): 5. Request GPIT0 be muxed via /sys/class/gpio/export 6. Request GPIU0 be muxed via /sys/class/gpio/export Together the tests demonstrate that all three pieces of functionality (general GPIOs via 1, 2 and 3, input-only GPIOs via 5 and 6, pass-through mode via 4) operate as desired across old and new SoCs. Fixes: 9b92f5c51e9a ("pinctrl: aspeed: Fix GPI only function problem.") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Billy Tsai <billy_tsai@aspeedtech.com> Cc: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201126063337.489927-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-05pinctrl: aspeed: Fix GPI only function problem.Billy Tsai1-3/+4
Some gpio pin at aspeed soc is input only and the prefix name of these pin is "GPI" only. This patch fine-tune the condition of GPIO check from "GPIO" to "GPI" and it will fix the usage error of banks D and E in the AST2400/AST2500 and banks T and U in the AST2600. Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20201030055450.29613-1-billy_tsai@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: aspeed-g6: Add bias controls for 1.8V GPIO banksAndrew Jeffery1-0/+17
These were skipped in the original patches adding pinconf support for the AST2600. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Johnny Huang <johnny_huang@aspeedtech.com> Link: https://lore.kernel.org/r/20200910025631.2996342-4-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: aspeed: Use the right pinconf maskAndrew Jeffery1-1/+1
The Aspeed pinconf data structures are split into 'conf' and 'map' types, where the 'conf' struct defines which register and bitfield to manipulate, while the 'map' struct defines what value to write to the register and bitfield. Both structs have a mask member, and the wrong mask was being used to tell the regmap which bits to update. A todo is to look at whether we can remove the mask from the 'map' struct. Fixes: 5f52c853847f ("pinctrl: aspeed: Use masks to describe pinconf bitfields") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Johnny Huang <johnny_huang@aspeedtech.com> Link: https://lore.kernel.org/r/20200910025631.2996342-3-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: aspeed: Format pinconf debug consistent with pinmuxAndrew Jeffery1-3/+3
When displaying which pinconf register and field is being touched, format the field mask so that it's consistent with the way the pinmux portion formats the mask. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200910025631.2996342-2-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: aspeed: Describe the heartbeat function on ball Y23Andrew Jeffery1-1/+6
The default pinmux configuration for Y23 is to route a heartbeat to drive a LED. Previous revisions of the AST2600 datasheet did not include a description of this function. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200701030756.2834657-1-joel@jms.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: aspeed: Improve debug outputAndrew Jeffery1-3/+22
We need to iterate over each pin in a group for a function and disable higher priority mux configurations on the pin before finally muxing the relevant function's signal. With the current debug output it is hard to track what register output is relevant to which operation, so break up the actions in the debug output by providing some more context. Before: [ 5.446656] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: request pin 37 (B26) for 1e780000.gpio:341 [ 5.447377] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.447854] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.448340] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 After: [ 5.298053] Muxing pin 37 for GPIO [ 5.298294] Disabling signal NRI4 for NRI4 [ 5.298593] Want SCU414[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.298983] Disabling signal RGMII4RXD1 for RGMII4 [ 5.299309] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.299694] Disabling signal RMII4RXD1 for RMII4 [ 5.300014] Want SCU4B4[0x00000020]=0x1, got 0x0 from 0x00000000 [ 5.300396] Enabling signal GPIOE5 for GPIOE5 [ 5.300687] Muxed pin 37 as GPIOE5 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200701030039.2834418-1-joel@jms.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-29Merge tag 'v5.5-rc3' into develLinus Walleij1-16/+8
Linux 5.5-rc3
2019-12-13pinctrl: aspeed-g6: Add AST2600 pinconf supportJohnny Huang2-0/+297
The AST2600 pinconf is a little different from previous generations of ASPEED BMC SoCs in terms of architecture. The pull-down setting is per-pin setting now, and drive-strength support 4 kind of value (e.g. 4ma, 8ma, 12ma, 16ma). Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Trim unused pinctrl register macros] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-8-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13pinctrl: aspeed: Use masks to describe pinconf bitfieldsJohnny Huang4-19/+20
Since some of the AST2600 pinconf setting are not just single bit, modified aspeed_pin_config @bit to @mask and add @mask to aspeed_pin_config_map to support configuring multiple bits. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Tweak commit message] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-7-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13pinctrl: aspeed: Move aspeed_pin_config_map to separate source fileJohnny Huang4-33/+44
The AST2600 pinconf differs from the 2400 and 2500, aspeed_pin_config_map should define separately, and add @confmaps and @nconfmaps to aspeed_pinctrl_data structure for that change. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-6-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13pinctrl: aspeed: Add ASPEED_SB_PINCONF() helperJohnny Huang3-181/+188
This helper macro is for declaring single bit (SB) mask pinconf, and is used to prepare for modifying aspeed_pin_config structure, the aspeed_pin_config structure @bit variable will be modified to @mask. This case is common in the AST2400/AST2500 which the mask is a single bit. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-5-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13pinctrl: aspeed-g6: Add support for the AST2600 USB pinmuxJohnny Huang2-1/+69
AST2600 has two USB ports, A, B: Port A supports 4 distinct modes: 1. PCIe EHCI to Hub 2. Hub to PHY 3. BMC EHCI to PHY 4. PCIe EHCI to PHY Port B support 3 modes: 1. USB1.1 HID controller 2. USB2.0 Device controller 3. BMC EHCI port2 Implement pinmux support by mapping each ports' functions onto a single pin group for each port. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-4-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13pinctrl: aspeed-g6: Add AST2600 I3C1 and I3C2 pinmux configJohnny Huang1-1/+29
These pins only expose a single function but are not fixed-function as their I3C capability can be disabled. Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Tweak commit message, sort pins list] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202061432.3996-3-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-12pinctrl: aspeed-g6: Fix LPC/eSPI mux configurationAndrew Jeffery1-16/+8
Early revisions of the AST2600 datasheet are conflicted about the state of the LPC/eSPI strapping bit (SCU510[6]). Conversations with ASPEED determined that the reference pinmux configuration tables were in error and the SCU documentation contained the correct configuration. Update the driver to reflect the state described in the SCU documentation. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202050110.15340-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groupsJohnny Huang2-40/+33
AST2600 EMMC support 3 types DAT bus sizes (1, 4 and 8-bit), corresponding to 3 groups: EMMCG1, EMMCG4 and EMMCG8 Fixes: 58dc52ad00a0 ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191008044153.12734-8-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: aspeed-g6: Fix UART13 group pinmuxJohnny Huang1-2/+2
When UART13G1 is set the pinmux configuration in SCU4B8 for UART13G0 should be cleared. Fixes: 58dc52ad00a0 ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Tweak commit message] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191008044153.12734-7-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: aspeed-g6: Make SIG_DESC_CLEAR() behave intuitivelyAndrew Jeffery1-1/+1
Signal descriptors can represent multi-bit bitfields and so have explicit "enable" and "disable" states. However many descriptor instances only describe a single bit, and so the SIG_DESC_SET() macro is provides an abstraction for the single-bit cases: Its expansion configures the "enable" state to set the bit and "disable" to clear. SIG_DESC_CLEAR() was introduced to provide a similar single-bit abstraction for for descriptors to clear the bit of interest. However its behaviour was defined as the literal inverse of SIG_DESC_SET() - the impact is the bit of interest is set in the disable path. This behaviour isn't intuitive and doesn't align with how we want to use the macro in practice, so make it clear the bit for both the enable and disable paths. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191008044153.12734-6-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configurationJohnny Huang1-16/+8
The documentation to configure I3C3/FSI1 and I3C4/FSI2 was initially unclear. Fixes: 58dc52ad00a0 ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> [AJ: Tweak commit message, resolve rebase conflicts] Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191008044153.12734-5-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: aspeed-g6: Fix I2C14 SDA descriptionAndrew Jeffery1-1/+1
The I2C function the pin participated in was incorrectly named SDA14 which lead to a failure to mux: [ 6.884344] No function I2C14 found on pin 7 (7). Found signal(s) MACLINK4, SDA14, GPIOA7 for function(s) MACLINK4, SDA14, GPIOA7 Fixes: 58dc52ad00a0 ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191008044153.12734-4-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: aspeed-g6: Sort pins for sanityAndrew Jeffery1-11/+11
Some pins crept in that weren't ordered in the list. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191008044153.12734-3-andrew@aj.id.au Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-20Merge tag 'pinctrl-v5.4-1' of ↵Linus Torvalds6-1802/+4523
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.4 kernel cycle: Core changes: - Fix errors in example code in the documentation. New drivers: - Add support for JZ4760, JZ4760B, X1000, X1000E and X1500 to the Ingenic driver. - Support Cirrus Logic Madera CS47L92 and CS47L15. - Support Allwinner Sunxi V3S. - Support Aspeed 2600 BMC. - Support Qualcomm SC7180. - Support Marvell MVEBU CS115. Driver improvements: - Clean up a few drivers to use the devm_platform_ioremap_resource() helper. - Pass the irqchip when registering the gpio_chip in some pin controllers that are also GPIO controllers. - Support suspend/resume in the Tegra driver. - Support pull-up on the Broadcom BCM2711. - The Intel driver can now request locked pads. - Fix the UFS reset pin in the Qualcomm SDM845 driver" * tag 'pinctrl-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits) pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c pinctrl: sh-pfc: Unlock on error in sh_pfc_func_set_mux() pinctrl: bcm: remove redundant assignment to pointer log pinctrl: iproc: Add 'get_direction' support pinctrl: iproc-gpio: Handle interrupts for multiple instances pinctrl: iproc-gpio: Fix incorrect pinconf configurations pinctrl: intel: mark intel_pin_to_gpio __maybe_unused pinctrl: qcom: sdm845: Fix UFS_RESET pin pinctrl: mvebu: add additional variant for standalone CP115 pinctrl: mvebu: Add CP110 missing pin functionality dt-bindings: cp110: document the new CP115 pinctrl compatible pinctrl: bcm2835: Pass irqchip when adding gpiochip pinctrl: meson: meson: Add of_node_put() before return pinctrl/gpio: Take MUX usage into account dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 support pinctrl: amd: disable spurious-firing GPIO IRQs pinctrl: rza2: Include the appropriate headers pinctrl: rza2: Drop driver use of consumer flags ...
2019-09-12pinctrl: aspeed: Fix spurious mux failures on the AST2500Andrew Jeffery3-6/+38
Commit 674fa8daa8c9 ("pinctrl: aspeed-g5: Delay acquisition of regmaps") was determined to be a partial fix to the problem of acquiring the LPC Host Controller and GFX regmaps: The AST2500 pin controller may need to fetch syscon regmaps during expression evaluation as well as when setting mux state. For example, this case is hit by attempting to export pins exposing the LPC Host Controller as GPIOs. An optional eval() hook is added to the Aspeed pinmux operation struct and called from aspeed_sig_expr_eval() if the pointer is set by the SoC-specific driver. This enables the AST2500 to perform the custom action of acquiring its regmap dependencies as required. John Wang tested the fix on an Inspur FP5280G2 machine (AST2500-based) where the issue was found, and I've booted the fix on Witherspoon (AST2500) and Palmetto (AST2400) machines, and poked at relevant pins under QEMU by forcing mux configurations via devmem before exporting GPIOs to exercise the driver. Fixes: 7d29ed88acbb ("pinctrl: aspeed: Read and write bits in LPC and GFX controllers") Fixes: 674fa8daa8c9 ("pinctrl: aspeed-g5: Delay acquisition of regmaps") Reported-by: John Wang <wangzqbj@inspur.com> Tested-by: John Wang <wangzqbj@inspur.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190829071738.2523-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-21Merge tag 'v5.3-rc5' into develLinus Walleij5-38/+75
Linux 5.3-rc5
2019-08-10pinctrl: aspeed: g6: Remove const specifier from aspeed_g6_sig_expr_set's ↵Nathan Chancellor1-1/+1
ctx parameter clang errors: drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c:2325:9: error: incompatible pointer types initializing 'int (*)(struct aspeed_pinmux_data *, const struct aspeed_sig_expr *, bool)' with an expression of type 'int (const struct aspeed_pinmux_data *, const struct aspeed_sig_expr *, bool)' [-Werror,-Wincompatible-pointer-types] .set = aspeed_g6_sig_expr_set, ^~~~~~~~~~~~~~~~~~~~~~ 1 error generated. Commit 674fa8daa8c9 ("pinctrl: aspeed-g5: Delay acquisition of regmaps") changed the set function pointer declaration and the g6 one wasn't updated (I assume because it wasn't merged yet). Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Link: https://github.com/ClangBuiltLinux/linux/issues/632 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20190807003037.48457-1-natechancellor@gmail.com Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Document existence of deprecated compatiblesAndrew Jeffery2-0/+8
Otherwise they look odd in the face of not being listed in the bindings documents. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190724081313.12934-3-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Add AST2600 pinmux supportAndrew Jeffery3-0/+2404
The AST2600 pinmux is fairly similar to the previous generations of ASPEED BMC SoCs in terms of architecture, though differ in some of the design details. The complexity of the pin expressions is largely reduced (e.g. there are no-longer signals with multiple expressions muxing them to the associated pin), and there are now signals and buses with multiple pin groups. The driver implements pinmux support for all 244 GPIO-capable pins plus a further four pins that are not GPIO capable but which expose multiple signals. pinconf will be implemented in a follow-up patch. The implementation has been smoke-tested under qemu, and run on hardware by ASPEED. Debugged-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190711041942.23202-7-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Add SIG_DESC_CLEAR() helperAndrew Jeffery1-0/+1
The complement of SIG_DESC_SET(). Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190729055604.13239-6-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Add multiple pin group support for functionsAndrew Jeffery3-1489/+1789
The AST2400 and AST2500 SoCs only exposed one pin group per function. Lone pin groups drove some implementation simplifications in the ASPEED pinmux infrastructure that is now invalid for the AST2600, which supports multiple groups per function for some functions on the chip (SMBus Alert pins and UARTs among others). This patch reworks the macro jungle to enable support for multiple pin groups. In the process we inflict some collateral damage on the existing AST2400 and AST2500 drivers, but the rework is mostly a relatively straight-forward, automated transform of adding the pin name as an argument to some macro calls and implementing wrappers to paper over groups in the cases where there aren't multiple. As previously documented, the macro infrastructure exposes mux configuration as symbols in the source file which are used to detect accidental duplication. Previously these symbols were named in terms of the signal for a given expression. As the AST2600 supports multiple pin groups for a function, the signal name on its own is no-longer unique, and we must switch to the (signal, group) tuple. However, this means that we can no-longer derive the signal expression symbol name from the signal name alone, which among other cases, impacts the operation of the PIN_DECL_x() macros. To fix that and avoid requiring we awkwardly provide the associated group name for every signal for every PIN_DECL_x() invocation, instead opportunistically alias the name of the signal expression symbol from the unique (signal, group) tuple to the also unique (pin, signal) tuple, then reference the alias symbol in the tables generated by PIN_DECL_x(). This way we do not require extra group parameters for PIN_DECL_x() as the pin name was already provided as an argument, and instead simply require that the pin name be provided to the expression declaration macros in order to generate the alias symbol. The patch implements the alias strategy and fixes up all the expression definition macro calls in the AST2400 and AST2500 drivers to account for pin groups. Given the implementation strategy has the property that compilation either fails or loudly warns for bad pin descriptions, this patch is theoretically tested by successfully compiling both affected drivers. For a more practical test I've inspected the diff of the content of the pinctrl debugfs entries before and after the patch under qemu; all pins, functions and groups match. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190729055604.13239-5-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Add PIN_DECL_3() helperAndrew Jeffery1-32/+40
This case is common in the AST2600, so add to the collection. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190729055604.13239-4-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Rename pin declaration macrosAndrew Jeffery3-405/+405
Rename macros as follows: * s/SS_PIN_DECL()/PIN_DECL_1()/ * s/MS_PIN_DECL()/PIN_DECL_2()/ * s/MS_PIN_DECL_()/PIN_DECL_()/ This is in preparation for adding PIN_DECL_3(). We could clean this up with e.g. CPPMAGIC_MAP() from ccan, but that might be a bridge too far given how much of a macro jungle we already have. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190729055604.13239-3-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-30pinctrl: aspeed: Make aspeed_pinmux_ips staticYueHaibing1-1/+1
Fix sparse warning: drivers/pinctrl/aspeed/pinmux-aspeed.c:8:12: warning: symbol 'aspeed_pinmux_ips' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190711142457.37028-1-yuehaibing@huawei.com Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29pinctrl: aspeed-g5: Delay acquisition of regmapsAndrew Jeffery4-37/+74
While sorting out some devicetree issues I found that the pinctrl driver was failing to acquire its GFX regmap even though the phandle was present in the devicetree: [ 0.124190] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: No GFX phandle found, some mux configurations may fail Without access to the GFX regmap we fail to configure the mux for the VPO function: [ 1.548866] pinctrl core: add 1 pinctrl maps [ 1.549826] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: found group selector 164 for VPO [ 1.550638] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 144 (V20) for 1e6e6000.display [ 1.551346] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 145 (U19) for 1e6e6000.display ... [ 1.562057] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 218 (T22) for 1e6e6000.display [ 1.562541] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 219 (R20) for 1e6e6000.display [ 1.563113] Muxing pin 144 for VPO [ 1.563456] Want SCU8C[0x00000001]=0x1, got 0x0 from 0x00000000 [ 1.564624] aspeed_gfx 1e6e6000.display: Error applying setting, reverse things back This turned out to be a simple problem of timing: The ASPEED pinctrl driver is probed during arch_initcall(), while GFX is processed much later. As such the GFX syscon is not yet registered during the pinctrl probe() and we get an -EPROBE_DEFER when we try to look it up, however we must not defer probing the pinctrl driver for the inability to mux some GFX-related functions. Switch to lazily grabbing the regmaps when they're first required by the mux configuration. This generates a bit of noise in the patch as we have to drop the `const` qualifier on arguments for several function prototypes, but has the benefit of working. I've smoke tested this for the ast2500-evb under qemu with a dummy graphics device. We now succeed in our attempts to configure the SoC's VPO pinmux function. Fixes: 7d29ed88acbb ("pinctrl: aspeed: Read and write bits in LPC and GFX controllers") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190724080155.12209-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-14Merge tag 'pinctrl-v5.3-1' of ↵Linus Torvalds7-753/+1089
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ...
2019-07-10pinctrl: aspeed: Strip moved macros and structs from private headerAndrew Jeffery1-498/+0
Further cleanup from the SPDX fixup fallout for the recent ASPEED series. aspeed_g4_defconfig, aspeed_g5_defconfig and multi_v5_defconfig now compile. Smoke tested the g4 and g5 kernels under QEMU's palmetto-bmc and romulus-bmc machines respectively. Fixes: 35d8510ea3ad ("pinctrl: aspeed: Fix missed include") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190710032216.4088-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-10pinctrl: aspeed: Fix missed includeLinus Walleij1-0/+2
Some SPDX churn made my fixes drop an important include from the Aspeed pinctrl header. Fix it up. Cc: Andrew Jeffery <andrew@aj.id.au> Reported-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03pinctrl: aspeed: Add implementation-related documentationAndrew Jeffery1-4/+200
The ASPEED pinctrl driver implementations make heavy use of macros to minimise tedium of implementation and maximise the chance that the compiler will catch errors in defining signal and pin configurations. While the goal of minimising errors is achieved, it is at the cost of the complexity of the macros. Document examples of the expanded form of pin declarations to demonstrate the operation of the macros. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-9-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03pinctrl: aspeed: Split out pinmux from general pinctrlAndrew Jeffery7-255/+888
ASPEED have completely rearranged the System Control Unit register layout with the AST2600. The existing code took advantage of the fact that the AST2400 and AST2500 had layouts that were similar enough to have little impact on the pinmux infrastructure (though there is a wart with read-modify-write vs write-1-clear semantics of the hardware strapping registers between the two). Given that any similarity has been thrown out with the AST2600, separate out the function applying an expression state to be driver-specific. With it, extract out the pinmux macro jungle to its own header and implementation so the pieces can be composed without dependency cycles. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-8-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03pinctrl: aspeed: Clarify comment about strapping W1CAndrew Jeffery1-1/+1
Writes of 1 to SCU7C clear set bits in SCU70, the hardware strapping register. The information was correct if you squinted while reading, but hopefully switching the order of the registers as listed conveys it better. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-7-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-03pinctrl: aspeed: Correct comment that is no longer trueAndrew Jeffery1-2/+1
We have handled the GFX register case for quite some time now. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-6-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-08pinctrl: aspeed: Add SGPM pinmuxHongwei Zhang1-0/+4
Add SGPM pinmux to ast2500-pinctrl function and group, to prepare for supporting SGPIO in AST2500 SoC. Signed-off-by: Hongwei Zhang <hongweiz@ami.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner4-20/+4
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-16pinctrl: aspeed: Wrap -Woverride-init with cc-optionNathan Chancellor1-1/+1
Clang does not support this option: warning: unknown warning option '-Woverride-init'; did you mean '-Woverride-module'? [-Wunknown-warning-option] 1 warning generated. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-31pinctrl: remove unnecessary unlikely()Igor Stoppa1-1/+1
WARN_ON() already contains an unlikely(), so it's not necessary to wrap it into another. Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-28pinctrl: aspeed: Fix documentationJoel Stanley1-2/+2
Fixes these warnings: pinctrl-aspeed.c:112: warning: Function parameter or member 'map' not described in 'aspeed_sig_desc_eval' pinctrl-aspeed.c:112: warning: Excess function parameter 'regmap' description in 'aspeed_sig_desc_eval' Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: aspeed: Rework strap register write logic for the AST2500Andrew Jeffery1-10/+16
Yong Li found that writes to the AST2500 strapping register were not properly supported by the Aspeed pinctrl core and provided a patch to rectify the problem. Several revisions of the patch were posted and ultimately v4 should have been applied, however some unfortunate liberal application of tags on my part lead to confusion between v3[1] and v4[2]. Generate the diff between v3 and v4 to apply as a fixup patch. [1] http://patchwork.ozlabs.org/patch/801662/ [2] http://patchwork.ozlabs.org/patch/802946/ Cc: Yong Li <sdliyong@gmail.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: aspeed: Fix ast2500 strap register write logicYong Li2-2/+18
On AST2500, the hardware strap register(SCU70) only accepts write ‘1’, to clear it to ‘0’, must set bits(write ‘1’) to SCU7C Signed-off-by: Yong Li <sdliyong@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: aspeed: g5: constify pinconf_ops, pinctrl_ops, and pinmux_ops ↵Julia Lawall1-3/+3
structures These structures are only stored in fields of a pinctrl_desc structure (confops, pctlops, and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: aspeed: g4: constify pinconf_ops, pinctrl_ops, and pinmux_ops ↵Julia Lawall1-2/+2
structures These structures are only stored in fields of a pinctrl_desc structure (pctlops, and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 17:17:54 +0300