summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)AuthorFilesLines
2021-08-12phy: pistachio-usb: Depend on MIPS || COMPILE_TESTJiaxun Yang1-1/+1
So it will be avilable for generic MIPS kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-06phy: qcom-qmp: add USB3 PHY support for IPQ6018Baruch Siach1-0/+3
Initialization is identical to the IPQ8074 USB3 PHY. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/6eec7ef4ecd1e8360ebe8e425151121684e997ed.1628085910.git.baruch@tkos.co.il Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-06phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/G2LBiju Das1-24/+73
This patch adds USB2.0 PHY support for RZ/G2L SoC. We need to use a different compatible string due to some differences with R-Car Gen3 USB2.0 PHY. It uses line ctrl register for OTG_ID pin changes and different OTG-BC interrupt bit for device recognition. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # on R-Car Link: https://lore.kernel.org/r/20210727185527.19907-4-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-06phy: qcom: qmp: Add SC8180x USB/DP comboBjorn Andersson1-0/+47
The two USB QMPs are USB/DP compbo PHYs, add the compatible for this combination to allow DP output. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210721225630.3035861-2-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-06phy: phy-twl4030-usb: Disable PHY for suspendTony Lindgren1-0/+15
Since commit 88d26136a256 ("PM: Prevent runtime suspend during system resume"), PM runtime will not let devices idle during system suspend. This is because of the pm_runtime_get_noresume() call done in device_prepare() that is not released until at device_complete() after resume. We must now disable the USB PHY in suspend if no USB cable is connected. Cc: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210727104512.52968-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-06phy: phy-mtk-tphy: add support mt8195Chunfeng Yun1-0/+54
The controller is designed to use use PLL integer mode, but in fact used fractional mode for some ones on mt8195, this causes signal degradation (e.g. eye diagram test fail), fix it by switching PLL to 26Mhz from default 48Mhz to improve signal quality. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1627028562-23584-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-06phy: phy-mtk-tphy: support new hardware versionChunfeng Yun1-11/+29
The PHYA arch is updated, and doesn't support slew rate calibrate anymore on 7nm or advanced process, add a new version number to support it. Note: the FreqMeter bank is not used but reserved. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1627028562-23584-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-06phy: qualcomm: phy-qcom-usb-hs: repair non-kernel-doc commentRandy Dunlap1-1/+1
Fix errant use of "/**" to begin a comment although the comment is not kernel-doc notation. Just use "/*" instead. Fixes this kernel-doc warning: drivers/phy/qualcomm/phy-qcom-usb-hs.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Copyright (C) 2016 Linaro Ltd Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20210723022548.25695-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-06phy: rockchip-inno-usb2: fix for_each_child.cocci warningskernel test robot1-1/+3
For_each_available_child_of_node should have of_node_put() before break around line 1184. The other jumps out of the loop do contain the put. Generated by: scripts/coccinelle/iterators/for_each_child.cocci CC: Sumera Priyadarsini <sylphrenadin@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2106231617540.99238@hadrien Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-22phy: tegra: xusb: mark PM functions as __maybe_unusedArnd Bergmann1-2/+2
When these are not referenced, gcc prints a harmless warning: drivers/phy/tegra/xusb.c:1286:12: error: 'tegra_xusb_padctl_resume_noirq' defined but not used [-Werror=unused-function] 1286 | static int tegra_xusb_padctl_resume_noirq(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/phy/tegra/xusb.c:1276:12: error: 'tegra_xusb_padctl_suspend_noirq' defined but not used [-Werror=unused-function] 1276 | static int tegra_xusb_padctl_suspend_noirq(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: c545a9056712 ("phy: tegra: xusb: Add sleepwalk and suspend/resume") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210721152550.2976003-1-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-22phy: qcom-qmp: Fix sc8180x PCIe definitionBjorn Andersson1-1/+1
A copy paste error was snuck into the patch going upstream that made the SC8180x PCIe PHY use the SM8250 serdes table, but while this works there's some differences in the tables (and the SC8180x was left dangling). So correct the SC8180x definition to use the SC8180x serdes table. Fixes: f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210721163029.2813497-1-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-20phy: samsung-ufs: support exynosauto ufs phy driverChanho Park4-2/+77
This patch adds to support phy-exynosautov9-ufs driver for ExynosAuto v9 series SoCs. The patch adds "samsung,exynosautov9-ufs-phy" compatible. Unlike previous exynos ufs phy, the chip uses 0x50 offset as PHY_TRSV_REG_CFG_OFFSET. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210709094524.110193-3-chanho61.park@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-20phy: samsung-ufs: move phy-exynos7-ufs headerChanho Park3-8/+9
Instead of using exynos7 ufs definition in phy-exynos7-ufs.h, we should put it into phy-exynos7-ufs.c to be included different objects or units. Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210709094524.110193-2-chanho61.park@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-20phy: qcom-qmp: Add sc8180x PCIe supportBjorn Andersson1-0/+140
The Qualcomm SC8180x platform has 4 PCIe controllers and PHYs, typically used to connect things such as a modem or NVME storage device. Add the programming sequence to get the PHYs up and running. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210629004509.1788286-2-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-06Merge tag 'usb-5.14-rc1' of ↵Linus Torvalds5-251/+1980
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.14-rc1. Nothing major here just lots of little changes for new hardware and features. Highlights are: - more USB 4 support added to the thunderbolt core - build warning fixes all over the place - usb-serial driver updates and new device support - mtu3 driver updates - gadget driver updates - dwc3 driver updates - dwc2 driver updates - isp1760 host driver updates - musb driver updates - lots of other tiny things. Full details are in the shortlog. All of these have been in linux-next for a while now with no reported issues" * tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits) phy: qcom-qusb2: Add configuration for SM4250 and SM6115 dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250 USB: cdc-acm: blacklist Heimann USB Appset device usb: xhci-mtk: allow multiple Start-Split in a microframe usb: ftdi-elan: remove redundant continue statement in a while-loop usb: class: cdc-wdm: return the correct errno code xhci: remove redundant continue statement usb: dwc3: Fix debugfs creation flow usb: gadget: hid: fix error return code in hid_bind() usb: gadget: eem: fix echo command packet response issue usb: gadget: f_hid: fix endianness issue with descriptors Revert "USB: misc: Add onboard_usb_hub driver" Revert "of/platform: Add stubs for of_platform_device_create/destroy()" Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()" Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub" xhci: solve a double free problem while doing s4 xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES ...
2021-07-06Merge tag 'staging-5.14-rc1' of ↵Linus Torvalds3-0/+672
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the big set of IIO and staging driver patches for 5.14-rc1. Loads of IIO driver updates and additions in here, the shortlog has the full details. For the staging side, we moved a few drivers out of staging, and deleted the kpc2000 drivers as the original developer asked us to because no one was working on them anymore. Also in here are loads of coding style cleanups due to different intern projects focusing on the staging tree to try to get experience doing kernel development. All of these have been in the linux-next tree for a while with no reported problems" * tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (744 commits) staging: hi6421-spmi-pmic: cleanup some macros staging: hi6421-spmi-pmic: change identation of a table staging: hi6421-spmi-pmic: change a return code staging: hi6421-spmi-pmic: better name IRQs staging: hi6421-spmi-pmic: use devm_request_threaded_irq() staging: hisilicon,hi6421-spmi-pmic.yaml: cleanup descriptions spmi: hisi-spmi-controller: move driver from staging phy: phy-hi3670-usb3: move driver from staging into phy staging: rtl8188eu: remove include/rtw_debug.h header staging: rtl8188eu: remove GlobalDebugLevel variable staging: rtl8188eu: remove DRIVER_PREFIX preprocessor definition staging: rtl8188eu: remove RT_TRACE macro staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_recv.c staging: rtl8188eu: remove all RT_TRACE calls from hal/hal_intf.c staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_xmit.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_xmit.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_pwrctrl.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_recv.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ioctl_set.c staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ieee80211.c ...
2021-07-05Merge tag 'char-misc-5.14-rc1' of ↵Linus Torvalds23-58/+1260
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char / misc and other driver subsystem updates for 5.14-rc1. Included in here are: - habanalabs driver updates - fsl-mc driver updates - comedi driver updates - fpga driver updates - extcon driver updates - interconnect driver updates - mei driver updates - nvmem driver updates - phy driver updates - pnp driver updates - soundwire driver updates - lots of other tiny driver updates for char and misc drivers This is looking more and more like the "various driver subsystems mushed together" tree... All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) mcb: Use DEFINE_RES_MEM() helper macro and fix the end address PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls bus: mhi: Wait for M2 state during system resume bus: mhi: core: Fix power down latency intel_th: Wait until port is in reset before programming it intel_th: msu: Make contiguous buffers uncached intel_th: Remove an unused exit point from intel_th_remove() stm class: Spelling fix nitro_enclaves: Set Bus Master for the NE PCI device misc: ibmasm: Modify matricies to matrices misc: vmw_vmci: return the correct errno code siox: Simplify error handling via dev_err_probe() fpga: machxo2-spi: Address warning about unused variable lkdtm/heap: Add init_on_alloc tests selftests/lkdtm: Enable various testable CONFIGs lkdtm: Add CONFIG hints in errors where possible lkdtm: Enable DOUBLE_FAULT on all architectures lkdtm/heap: Add vmalloc linear overflow test lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE ...
2021-06-29phy: intel: Fix for warnings due to EMMC clock 175Mhz change in FIPRashmi A1-1/+2
Since the EMMC clock was changed from 200Mhz to 175Mhz in FIP, there were some warnings introduced, as the frequency values being checked was still wrt 200Mhz in code. Hence, the frequency checks are now updated based on the current 175Mhz EMMC clock changed in FIP. Spamming kernel log msg: "phy phy-20290000.mmc_phy.2: Unsupported rate: 43750000" Signed-off-by: Rashmi A <rashmi.a@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210603182242.25733-3-rashmi.a@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-06-25phy: phy-hi3670-usb3: move driver from staging into phyMauro Carvalho Chehab3-0/+672
The phy USB3 driver for Hisilicon 970 (hi3670) is ready for mainstream. Mode it from staging into the main driver's phy/ directory. Acked-by: Rob Herring <robh@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/dcf66a01aaeaab93cda52f9a283ecbdf9fa71bb8.1624606660.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24phy: qcom-qusb2: Add configuration for SM4250 and SM6115Iskren Chernev1-0/+34
The SM4250 and SM6115 uses the same register layout as MSM8996, but the tune sequence is a bit different. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210622203240.559979-4-iskren.chernev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23Merge tag 'phy-for-5.14_v2' of ↵Greg Kroah-Hartman23-58/+1260
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.14 version 2 - Updates: - Yaml conversion for renesas,rcar-gen3 pcie phy and rockchip-usb-phy bindings - Support for devm_phy_get() taking NULL phy name - New support: - PCIe phy for Qualcomm IPQ60xx - PCIe phy for Qualcomm SDX55 - USB phy for RK3308 - CAN transceivers phy for TI TCAN104x - Innosilicon-based CSI dphy for rockchip * tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (36 commits) phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'" phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe() phy: uniphier-pcie: Fix updating phy parameters phy/rockchip: add Innosilicon-based CSI dphy dt-bindings: phy: add yaml binding for rockchip-inno-csi-dphy phy: rockchip: remove redundant initialization of pointer cfg phy: phy-can-transceiver: Add support for generic CAN transceiver driver dt-bindings: phy: Add binding for TI TCAN104x CAN transceivers phy: core: Reword the comment specifying the units of max_link_rate to be Mbps phy: phy-mtk-hdmi: Remove redundant dev_err call in mtk_hdmi_phy_probe() phy: phy-mtk-mipi-dsi: Remove redundant dev_err call in mtk_mipi_tx_probe() phy: phy-mmp3-hsic: Remove redundant dev_err call in mmp3_hsic_phy_probe() phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe() MAINTAINERS: update marvell,armada-3700-utmi-phy.yaml reference phy: phy-twl4030-usb: use DEVICE_ATTR_RO macro dt-bindings: phy: convert rockchip-usb-phy.txt to YAML phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy dt-bindings: phy: rockchip-inno-usb2: add compatible for rk3308 USB phy phy: stm32: manage optional vbus regulator on phy_power_on/off dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc ...
2021-06-23phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'"Vinod Koul1-2/+2
This reverts commit 6eded551cefe ("phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'") as we don't want drivers to be built in and should be a module instead Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()Christophe JAILLET1-4/+13
Add an error handling path in the probe to release some resources, as already done in the remove function. Fixes: 609adde838f4 ("phy: Add a driver for dm816x USB PHY") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ac5136881f6bdec50be19b3bf73b3bc1b15ef1f1.1622898974.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21phy: uniphier-pcie: Fix updating phy parametersKunihiko Hayashi1-4/+7
The current driver uses a value from register TEST_O as the original value for register TEST_I, though, the value is overwritten by "param", so there is a bug that the original value isn't no longer used. The value of TEST_O[7:0] should be masked with "mask", replaced with "param", and placed in the bitfield TESTI_DAT_MASK as new TEST_I value. Fixes: c6d9b1324159 ("phy: socionext: add PCIe PHY driver support") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1623037842-19363-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21phy/rockchip: add Innosilicon-based CSI dphyHeiko Stuebner3-0/+469
The CSI dphy found for example on the rk3326/px30 and rk3368 is based on an IP design from Innosilicon. Add a driver for it. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210610212935.3520341-3-heiko@sntech.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-21phy: rockchip: remove redundant initialization of pointer cfgColin Ian King1-2/+2
The pointer cfg is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210609113901.185230-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14Merge tag 'for-5.14-usb' of ↵Greg Kroah-Hartman4-251/+1946
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into usb-next Thierry writes: usb: tegra: Changes for v5.14-rc1 Implements proper suspend/resume for the XUSB controller found on recent Tegra chips. * tag 'for-5.14-usb' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: usb: xhci: tegra: Enable ELPG for runtime/system PM usb: xhci: tegra: Unlink power domain devices phy: tegra: xusb: Add wake/sleepwalk for Tegra186 phy: tegra: xusb: Tegra210 host mode VBUS control phy: tegra: xusb: Add wake/sleepwalk for Tegra210 phy: tegra: xusb: Add sleepwalk and suspend/resume phy: tegra: xusb: Add Tegra210 lane_iddq operation phy: tegra: xusb: Rearrange UPHY init on Tegra210 phy: tegra: xusb: Move usb3 port init for Tegra210
2021-06-14phy: phy-can-transceiver: Add support for generic CAN transceiver driverAswath Govindraju3-0/+156
The driver adds support for generic CAN transceivers. Currently the modes supported by this driver are standby and normal modes for TI TCAN1042 and TCAN1043 CAN transceivers. The transceiver is modelled as a phy with pins controlled by gpios, to put the transceiver in various device functional modes. It also gets the phy attribute max_link_rate for the usage of CAN drivers. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20210510051006.11393-4-a-govindraju@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14phy: phy-mtk-hdmi: Remove redundant dev_err call in mtk_hdmi_phy_probe()He Ying1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: He Ying <heying24@huawei.com> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210408115530.15673-1-heying24@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14phy: phy-mtk-mipi-dsi: Remove redundant dev_err call in mtk_mipi_tx_probe()He Ying1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: He Ying <heying24@huawei.com> Link: https://lore.kernel.org/r/20210408114850.14422-1-heying24@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14phy: phy-mmp3-hsic: Remove redundant dev_err call in mmp3_hsic_phy_probe()He Ying1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: He Ying <heying24@huawei.com> Link: https://lore.kernel.org/r/20210408090806.247325-1-heying24@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-14phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe()He Ying1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: He Ying <heying24@huawei.com> Link: https://lore.kernel.org/r/20210408090808.247368-1-heying24@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03phy: tegra: xusb: Add wake/sleepwalk for Tegra186JC Kuo1-1/+549
This commit implements Tegra186/Tegra194 XUSB PADCTL/AO wake and sleepwalk operations. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Tegra210 host mode VBUS controlJC Kuo1-12/+40
To support XUSB host controller ELPG, this commit moves VBUS control .phy_power_on()/.phy_power_off() to .phy_init()/.phy_exit(). When XUSB host controller enters ELPG, host driver invokes .phy_power_off(), VBUS should remain ON so that USB devices will not disconnect. VBUS can be turned OFF when host driver invokes .phy_exit() which indicates disabling a USB port. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Add wake/sleepwalk for Tegra210JC Kuo1-0/+910
This commit implements Tegra210 XUSB PADCTL wake and sleepwalk routines. Sleepwalk logic is in PMC (always-on) hardware block. PMC driver provides managed access to the sleepwalk registers via regmap framework. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Add sleepwalk and suspend/resumeJC Kuo2-0/+90
This commit adds sleepwalk/wake and suspend/resume interfaces to Tegra XUSB PHY driver. Tegra XUSB host controller driver makes use of sleepwalk functions to enable/disable sleepwalk circuit which is in always-on partition and can respond to USB resume signals when controller is not powered. Sleepwalk can be enabled/disabled for any USB UPHY individually. - tegra_xusb_padctl_enable_phy_sleepwalk() - tegra_xusb_padctl_disable_phy_sleepwalk() Tegra XUSB host controller driver makes use of wake functions to enable/disable/query wake circuit which is in always-on partition can wake system up when USB resume happens. Wake circuit can be enabled/disabled for any USB PHY individually. - tegra_xusb_padctl_enable_phy_wake() - tegra_xusb_padctl_disable_phy_wake() - tegra_xusb_padctl_remote_wake_detected() This commit also adds two system suspend stubs that can be used to save and restore XUSB PADCTL context during system suspend and resume. - tegra_xusb_padctl_suspend_noirq() - tegra_xusb_padctl_resume_noirq() Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Add Tegra210 lane_iddq operationJC Kuo3-8/+86
As per Tegra210 TRM, before changing lane assignments, driver should keep lanes in IDDQ and sleep state; after changing lane assignments, driver should bring lanes out of IDDQ. This commit implements the required operations. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Rearrange UPHY init on Tegra210JC Kuo2-98/+103
This commit is a preparation for enabling XUSB SC7 support. It rearranges Tegra210 XUSB PADCTL UPHY initialization sequence, for the following reasons: 1. PLLE hardware power sequencer has to be enabled only after both PEX UPHY PLL and SATA UPHY PLL are initialized. tegra210_uphy_init() -> tegra210_pex_uphy_enable() -> tegra210_sata_uphy_enable() -> tegra210_plle_hw_sequence_start() -> tegra210_aux_mux_lp0_clamp_disable() 2. At cold boot and SC7 exit, the following bits must be cleared after PEX/SATA lanes are out of IDDQ (IDDQ_DISABLE=1). a. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN, b. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY c. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN tegra210_pex_uphy_enable() and tegra210_sata_uphy_enable() are in charge of bringing lanes out of IDDQ, and then AUX_MUX_LP0_* bits will be cleared by tegra210_aux_mux_lp0_clamp_disable(). 3. Once UPHY PLL hardware power sequencer is enabled, do not assert reset to PEX/SATA PLLs, otherwise UPHY PLL operation will be broken. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: tegra: xusb: Move usb3 port init for Tegra210JC Kuo3-144/+180
The programming sequence in tegra210_usb3_port_enable() is required for both cold boot and SC7 exit, and must be performed only after PEX/SATA UPHY is initialized. Therefore, this commit moves the programming sequence to tegra210_usb3_phy_power_on(). PCIE/SATA phy .power_on() stub will invoke tegra210_usb3_phy_power_on() if the lane is assigned for XUSB super-speed. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-03phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()Yang Yingliang1-0/+4
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210603051014.2674744-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variableSergio Paracuellos1-1/+1
The of_device_id is included unconditionally by of.h header and used in the driver as well. Remove of_match_ptr to fix W=1 compile test warning with !CONFIG_OF: drivers/phy/ralink/phy-mt7621-pci.c:341:34: warning: unused variable 'mt7621_pci_phy_ids' [-Wunused-const-variable] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210603043219.32646-1-sergio.paracuellos@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: ti: Fix an error code in wiz_probe()Yang Li1-0/+1
When the code execute this if statement, the value of ret is 0. However, we can see from the dev_err() log that the value of ret should be -EINVAL. Clean up smatch warning: drivers/phy/ti/phy-j721e-wiz.c:1216 wiz_probe() warn: missing error code 'ret' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: c9f9eba06629 ("phy: ti: j721e-wiz: Manage typec-gpio-dir") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1621939832-65535-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-twl4030-usb: use DEVICE_ATTR_RO macroYueHaibing1-3/+3
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210520135132.37628-1-yuehaibing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-rockchip-inno-usb2: add support for RK3308 USB phyTobias Schramm1-0/+44
The RK3308 SoC uses a slightly different USB phy than other Rockchip parts. This commit adds support for that phy. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Link: https://lore.kernel.org/r/20210514150044.2099298-3-t.schramm@manjaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: stm32: manage optional vbus regulator on phy_power_on/offAmelie Delaunay1-0/+31
This patch adds support for optional vbus regulator. It is managed on phy_power_on/off calls and may be needed for host mode. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210517120821.26466-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: qcom-qmp: remove redundant error of clock bulkChunfeng Yun1-6/+2
There is error log in clk_bulk_prepare/enable() Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1621229841-22984-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-xgene.c: Fix alignment of commentShubhankar Kuranagatti1-1/+2
A * has been added at the starting of new line The closing */ of multi line comment shifted to new line This is done to maintain code uniformity. Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210428165515.o47o5awzdxirxkqi@kewl-virtual-machine Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()Tiezhu Yang1-0/+2
Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix some resource leaks. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1621420659-15858-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()Wang Wensheng1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: a43f72ae136a ("phy: cadence: Sierra: Change MAX_LANES of Sierra to 16") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Link: https://lore.kernel.org/r/20210517015749.127799-1-wangwensheng4@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: qcom-qmp: Add support for SDX55 QMP PCIe PHYManivannan Sadhasivam2-1/+187
The PCIe PHY version used in SDX55 is v4.20 which has different register offsets compared to the v4.0x PHYs. So separate register defines are used for init sequence and PHY status. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210427065400.18958-4-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 15:57:52 +0300