summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2020-10-29PCI: hv: Fix hibernation in case interrupts are not re-createdDexuan Cui1-3/+47
[ Upstream commit 915cff7f38c5e4d47f187f8049245afc2cb3e503 ] pci_restore_msi_state() directly writes the MSI/MSI-X related registers via MMIO. On a physical machine, this works perfectly; for a Linux VM running on a hypervisor, which typically enables IOMMU interrupt remapping, the hypervisor usually should trap and emulate the MMIO accesses in order to re-create the necessary interrupt remapping table entries in the IOMMU, otherwise the interrupts can not work in the VM after hibernation. Hyper-V is different from other hypervisors in that it does not trap and emulate the MMIO accesses, and instead it uses a para-virtualized method, which requires the VM to call hv_compose_msi_msg() to notify the hypervisor of the info that would be passed to the hypervisor in the case of the trap-and-emulate method. This is not an issue to a lot of PCI device drivers, which destroy and re-create the interrupts across hibernation, so hv_compose_msi_msg() is called automatically. However, some PCI device drivers (e.g. the in-tree GPU driver nouveau and the out-of-tree Nvidia proprietary GPU driver) do not destroy and re-create MSI/MSI-X interrupts across hibernation, so hv_pci_resume() has to call hv_compose_msi_msg(), otherwise the PCI device drivers can no longer receive interrupts after the VM resumes from hibernation. Hyper-V is also different in that chip->irq_unmask() may fail in a Linux VM running on Hyper-V (on a physical machine, chip->irq_unmask() can not fail because unmasking an MSI/MSI-X register just means an MMIO write): during hibernation, when a CPU is offlined, the kernel tries to move the interrupt to the remaining CPUs that haven't been offlined yet. In this case, hv_irq_unmask() -> hv_do_hypercall() always fails because the vmbus channel has been closed: here the early "return" in hv_irq_unmask() means the pci_msi_unmask_irq() is not called, i.e. the desc->masked remains "true", so later after hibernation, the MSI interrupt always remains masked, which is incorrect. Refer to cpu_disable_common() -> fixup_irqs() -> irq_migrate_all_off_this_cpu() -> migrate_one_irq(): static bool migrate_one_irq(struct irq_desc *desc) { ... if (maskchip && chip->irq_mask) chip->irq_mask(d); ... err = irq_do_set_affinity(d, affinity, false); ... if (maskchip && chip->irq_unmask) chip->irq_unmask(d); Fix the issue by calling pci_msi_unmask_irq() unconditionally in hv_irq_unmask(). Also suppress the error message for hibernation because the hypercall failure during hibernation does not matter (at this time all the devices have been frozen). Note: the correct affinity info is still updated into the irqdata data structure in migrate_one_irq() -> irq_do_set_affinity() -> hv_set_affinity(), so later when the VM resumes, hv_pci_restore_msi_state() is able to correctly restore the interrupt with the correct affinity. Link: https://lore.kernel.org/r/20201002085158.9168-1-decui@microsoft.com Fixes: ac82fc832708 ("PCI: hv: Add hibernation support") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Jake Oshins <jakeo@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29PCI/IOV: Mark VFs as not implementing PCI_COMMAND_MEMORYMatthew Rosato1-0/+1
[ Upstream commit 12856e7acde4702b7c3238c15fcba86ff6aa507f ] For VFs, the Memory Space Enable bit in the Command Register is hard-wired to 0. Add a new bit to signify devices where the Command Register Memory Space Enable bit does not control the device's response to MMIO accesses. Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29PCI: iproc: Set affinity mask on MSI interruptsMark Tomlinson1-4/+9
[ Upstream commit eb7eacaa5b9e4f665bd08d416c8f88e63d2f123c ] The core interrupt code expects the irq_set_affinity call to update the effective affinity for the interrupt. This was not being done, so update iproc_msi_irq_set_affinity() to do so. Link: https://lore.kernel.org/r/20200803035241.7737-1-mark.tomlinson@alliedtelesis.co.nz Fixes: 3bc2b2348835 ("PCI: iproc: Add iProc PCIe MSI support") Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29PCI: aardvark: Check for errors from pci_bridge_emul_init() callPali Rohár1-4/+7
[ Upstream commit 7862a6134456c8b4f8c39e8c94aa97e5c2f7f2b7 ] Function pci_bridge_emul_init() may fail so correctly check for errors. Link: https://lore.kernel.org/r/20200907111038.5811-3-pali@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29PCI: aardvark: Fix compilation on s390Pali Rohár1-1/+1
[ Upstream commit b32c012e4b98f0126aa327be2d1f409963057643 ] Include linux/gpio/consumer.h instead of linux/gpio.h, as is said in the latter file. This was reported by kernel test bot when compiling for s390. drivers/pci/controller/pci-aardvark.c:350:2: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1074:21: error: implicit declaration of function 'devm_gpiod_get_from_of_node' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1076:14: error: use of undeclared identifier 'GPIOD_OUT_LOW' Link: https://lore.kernel.org/r/202006211118.LxtENQfl%25lkp@intel.com Link: https://lore.kernel.org/r/20200907111038.5811-2-pali@kernel.org Fixes: 5169a9851daa ("PCI: aardvark: Issue PERST via GPIO") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29PCI: designware-ep: Fix the Header Type checkHou Zhiqiang1-1/+2
[ Upstream commit 16270a92355722e387e9ca19627c5a4d7bae1354 ] The current check will result in the multiple function device fails to initialize. So fix the check by masking out the multiple function bit. Link: https://lore.kernel.org/r/20200818092746.24366-1-Zhiqiang.Hou@nxp.com Fixes: 0b24134f7888 ("PCI: dwc: Add validation that PCIe core is set to correct mode") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03PCI: qcom: Add missing reset for ipq806xAnsuel Smith1-0/+12
[ Upstream commit ee367e2cdd2202b5714982739e684543cd2cee0e ] Add missing ext reset used by ipq8064 SoC in PCIe qcom driver. Link: https://lore.kernel.org/r/20200615210608.21469-5-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03PCI: qcom: Change duplicate PCI reset to phy resetAbhishek Sahu1-10/+8
[ Upstream commit dd58318c019f10bc94db36df66af6c55d4c0cbba ] The deinit issues reset_control_assert for PCI twice and does not contain phy reset. Link: https://lore.kernel.org/r/20200615210608.21469-4-ansuelsmth@gmail.com Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03PCI: qcom: Add missing ipq806x clocks in PCIe driverAnsuel Smith1-5/+33
[ Upstream commit 8b6f0330b5f9a7543356bfa9e76d580f03aa2c1e ] Aux and Ref clk are missing in PCIe qcom driver. Add support for this optional clks for ipq8064/apq8064 SoC. Link: https://lore.kernel.org/r/20200615210608.21469-2-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03PCI: Fix pci_create_slot() reference count leakQiushi Wu1-2/+4
[ Upstream commit 8a94644b440eef5a7b9c104ac8aa7a7f413e35e5 ] kobject_init_and_add() takes a reference even when it fails. If it returns an error, kobject_put() must be called to clean up the memory associated with the object. When kobject_init_and_add() fails, call kobject_put() instead of kfree(). b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") fixed a similar problem. Link: https://lore.kernel.org/r/20200528021322.1984-1-wu000273@umn.edu Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26s390/pci: re-introduce zpci_remove_device()Niklas Schnelle1-7/+5
commit 2f0230b2f2d5fd287a85583eefb5aed35b6fe510 upstream. For fixing the PF to VF link removal we need to perform some action on every removal of a zdev from the common PCI subsystem. So in preparation re-introduce zpci_remove_device() and use that instead of directly calling the common code functions. This was actually still declared from earlier code but no longer implemented. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21PCI: qcom: Add support for tx term offset for rev 2.1.0Ansuel Smith1-1/+16
commit de3c4bf648975ea0b1d344d811e9b0748907b47c upstream. Add tx term offset support to pcie qcom driver need in some revision of the ipq806x SoC. Ipq8064 needs tx term offset set to 7. Link: https://lore.kernel.org/r/20200615210608.21469-9-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21PCI: qcom: Define some PARF params needed for ipq8064 SoCAnsuel Smith1-0/+24
commit 5149901e9e6deca487c01cc434a3ac4125c7b00b upstream. Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization needed on some ipq8064 based device (Netgear R7800 for example). Without this the system locks on kernel load. Link: https://lore.kernel.org/r/20200615210608.21469-8-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21PCI: Add device even if driver attach failedRajat Jain1-5/+1
commit 2194bc7c39610be7cabe7456c5f63a570604f015 upstream. device_attach() returning failure indicates a driver error while trying to probe the device. In such a scenario, the PCI device should still be added in the system and be visible to the user. When device_attach() fails, merely warn about it and keep the PCI device in the system. This partially reverts ab1a187bba5c ("PCI: Check device_attach() return value always"). Link: https://lore.kernel.org/r/20200706233240.3245512-1-rajatja@google.com Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21PCI: Mark AMD Navi10 GPU rev 0x00 ATS as brokenKai-Heng Feng1-1/+4
commit 45beb31d3afb651bb5c41897e46bd4fa9980c51c upstream. We are seeing AMD Radeon Pro W5700 doesn't work when IOMMU is enabled: iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01a0] iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01c0] The error also makes graphics driver fail to probe the device. It appears to be the same issue as commit 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") addresses, and indeed the same ATS quirk can workaround the issue. See-also: 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") See-also: d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") See-also: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208725 Link: https://lore.kernel.org/r/20200728104554.28927-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21PCI/ATS: Add pci_pri_supported() to check device or associated PFAshok Raj1-0/+15
commit 3f9a7a13fe4cb6e119e4e4745fbf975d30bfac9b upstream. For SR-IOV, the PF PRI is shared between the PF and any associated VFs, and the PRI Capability is allowed for PFs but not for VFs. Searching for the PRI Capability on a VF always fails, even if its associated PF supports PRI. Add pci_pri_supported() to check whether device or its associated PF supports PRI. [bhelgaas: commit log, avoid "!!"] Fixes: b16d0cb9e2fc ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS") Link: https://lore.kernel.org/r/1595543849-19692-1-git-send-email-ashok.raj@intel.com Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()Rafael J. Wysocki1-3/+11
commit dae68d7fd4930315389117e9da35b763f12238f9 upstream. If context is not NULL in acpiphp_grab_context(), but the is_going_away flag is set for the device's parent, the reference counter of the context needs to be decremented before returning NULL or the context will never be freed, so make that happen. Fixes: edf5bf34d408 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts") Reported-by: Vasily Averin <vvs@virtuozzo.com> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-19irqdomain/treewide: Free firmware node after domain removalJon Derrick1-0/+3
commit ec0160891e387f4771f953b888b1fe951398e5d9 upstream. Commit 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") unintentionally caused a dangling pointer page fault issue on firmware nodes that were freed after IRQ domain allocation. Commit e3beca48a45b fixed that dangling pointer issue by only freeing the firmware node after an IRQ domain allocation failure. That fix no longer frees the firmware node immediately, but leaves the firmware node allocated after the domain is removed. The firmware node must be kept around through irq_domain_remove, but should be freed it afterwards. Add the missing free operations after domain removal where where appropriate. Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-19PCI: Release IVRS table in AMD ACS quirkHanjun Guo1-0/+2
[ Upstream commit 090688fa4e448284aaa16136372397d7d10814db ] The acpi_get_table() should be coupled with acpi_put_table() if the mapped table is not used at runtime to release the table mapping. In pci_quirk_amd_sb_acs(), IVRS table is just used for checking AMD IOMMU is supported, not used at runtime, so put the table after using it. Fixes: 15b100dfd1c9 ("PCI: Claim ACS support for AMD southbridge devices") Link: https://lore.kernel.org/r/1595411068-15440-1-git-send-email-guohanjun@huawei.com Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID registerKishon Vijay Abraham I1-2/+7
[ Upstream commit e3bca37d15dca118f2ef1f0a068bb6e07846ea20 ] Commit 1b79c5284439 ("PCI: cadence: Add host driver for Cadence PCIe controller") in order to update Vendor ID, directly wrote to PCI_VENDOR_ID register. However PCI_VENDOR_ID in root port configuration space is read-only register and writing to it will have no effect. Use local management register to configure Vendor ID and Subsystem Vendor ID. Link: https://lore.kernel.org/r/20200722110317.4744-10-kishon@ti.com Fixes: 1b79c5284439 ("PCI: cadence: Add host driver for Cadence PCIe controller") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error pathKishon Vijay Abraham I2-12/+3
[ Upstream commit 19abcd790b51b26d775e1170ba2ac086823cceeb ] commit bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library") while refactoring the Cadence PCIe driver to be used as library, removed pm_runtime_get_sync() from cdns_pcie_ep_setup() and cdns_pcie_host_setup() but missed to remove the corresponding pm_runtime_put_sync() in the error path. Fix it here. Link: https://lore.kernel.org/r/20200722110317.4744-3-kishon@ti.com Fixes: bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19PCI: rcar: Fix runtime PM imbalance on errorDinghao Liu1-3/+1
[ Upstream commit a68e06e729b1b06c50ee52917d6b825b43e7d269 ] pm_runtime_get_sync() increments the runtime PM usage counter even when the call returns an error code. Thus a corresponding decrement is needed on the error handling path to keep the counter balanced. Link: https://lore.kernel.org/r/20200709064356.8800-1-dinghao.liu@zju.edu.cn Fixes: 0df6150e7ceb ("PCI: rcar: Use runtime PM to control controller clock") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19PCI: loongson: Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk()Tiezhu Yang1-3/+3
[ Upstream commit 14110af606965ce07abe4d121c100241c2e73b86 ] According to the datasheet of Loongson LS7A bridge chip, the old version of Loongson LS7A PCIE port has a wrong value about PCI class which is 0x060000, the correct value should be 0x060400, this bug can be fixed by "dev->class = PCI_CLASS_BRIDGE_PCI << 8;" at the software level and it was fixed in hardware in the latest LS7A versions. In order to maintain downward compatibility, use DECLARE_PCI_FIXUP_EARLY instead of DECLARE_PCI_FIXUP_HEADER for bridge_class_quirk() to fix it as early as possible. Otherwise, in the function pci_setup_device(), the related code about "dev->class" such as "class = dev->class >> 8;" and "dev->transparent = ((dev->class & 0xff) == 1);" maybe get wrong value without EARLY fixup. Link: https://lore.kernel.org/r/1595065176-460-1-git-send-email-yangtiezhu@loongson.cn Fixes: 1f58cca5cf2b ("PCI: Add Loongson PCI Controller support") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19PCI/ASPM: Add missing newline in sysfs 'policy'Xiongfeng Wang1-0/+1
[ Upstream commit 3167e3d340c092fd47924bc4d23117a3074ef9a9 ] When I cat ASPM parameter 'policy' by sysfs, it displays as follows. Add a newline for easy reading. Other sysfs attributes already include a newline. [root@localhost ~]# cat /sys/module/pcie_aspm/parameters/policy [default] performance powersave powersupersave [root@localhost ~]# Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/1594972765-10404-1-git-send-email-wangxiongfeng2@huawei.com Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19PCI: Fix pci_cfg_wait queue locking problemBjorn Helgaas1-6/+2
[ Upstream commit 2a7e32d0547f41c5ce244f84cf5d6ca7fccee7eb ] The pci_cfg_wait queue is used to prevent user-space config accesses to devices while they are recovering from reset. Previously we used these operations on pci_cfg_wait: __add_wait_queue(&pci_cfg_wait, ...) __remove_wait_queue(&pci_cfg_wait, ...) wake_up_all(&pci_cfg_wait) The wake_up acquires the wait queue lock, but the add and remove do not. Originally these were all protected by the pci_lock, but cdcb33f98244 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock"), moved wake_up_all() outside pci_lock, so it could race with add/remove operations, which caused occasional kernel panics, e.g., during vfio-pci hotplug/unplug testing: Unable to handle kernel read from unreadable memory at virtual address ffff802dac469000 Resolve this by using wait_event() instead of __add_wait_queue() and __remove_wait_queue(). The wait queue lock is held by both wait_event() and wake_up_all(), so it provides mutual exclusion. Fixes: cdcb33f98244 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock") Link: https://lore.kernel.org/linux-pci/79827f2f-9b43-4411-1376-b9063b67aee3@huawei.com/T/#u Based-on: https://lore.kernel.org/linux-pci/20191210031527.40136-1-zhengxiang9@huawei.com/ Based-on-patch-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Xiang Zheng <zhengxiang9@huawei.com> Cc: Heyi Guo <guoheyi@huawei.com> Cc: Biaoxiang Ye <yebiaoxiang@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-11PCI: tegra: Revert tegra124 raw_violation_fixupNicolas Chauvet1-32/+0
commit e7b856dfcec6d3bf028adee8c65342d7035914a1 upstream. As reported in https://bugzilla.kernel.org/206217 , raw_violation_fixup is causing more harm than good in some common use-cases. This patch is a partial revert of commit: 191cd6fb5d2c ("PCI: tegra: Add SW fixup for RAW violations") and fixes the following regression since then. * Description: When both the NIC and MMC are used one can see the following message: NETDEV WATCHDOG: enp1s0 (r8169): transmit queue 0 timed out and pcieport 0000:00:02.0: AER: Uncorrected (Non-Fatal) error received: 0000:01:00.0 r8169 0000:01:00.0: AER: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) r8169 0000:01:00.0: AER: device [10ec:8168] error status/mask=00004000/00400000 r8169 0000:01:00.0: AER: [14] CmpltTO (First) r8169 0000:01:00.0: AER: can't recover (no error_detected callback) pcieport 0000:00:02.0: AER: device recovery failed After that, the ethernet NIC is not functional anymore even after reloading the r8169 module. After a reboot, this is reproducible by copying a large file over the NIC to the MMC. For some reason this is not reproducible when files are copied to a tmpfs. * Little background on the fixup, by Manikanta Maddireddy: "In the internal testing with dGPU on Tegra124, CmplTO is reported by dGPU. This happened because FIFO queue in AFI(AXI to PCIe) module get full by upstream posted writes. Back to back upstream writes interleaved with infrequent reads, triggers RAW violation and CmpltTO. This is fixed by reducing the posted write credits and by changing updateFC timer frequency. These settings are fixed after stress test. In the current case, RTL NIC is also reporting CmplTO. These settings seems to be aggravating the issue instead of fixing it." Link: https://lore.kernel.org/r/20200718100710.15398-1-kwizart@gmail.com Fixes: 191cd6fb5d2c ("PCI: tegra: Add SW fixup for RAW violations") Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-30Merge tag 'pci-v5.8-fixes-3' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Disable ASPM on ASM1083/1085 PCIe-to-PCI bridge (Robert Hancock)" * tag 'pci-v5.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridge
2020-07-30PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridgeRobert Hancock1-0/+13
Recently ASPM handling was changed to allow ASPM on PCIe-to-PCI/PCI-X bridges. Unfortunately the ASMedia ASM1083/1085 PCIe to PCI bridge device doesn't seem to function properly with ASPM enabled. On an Asus PRIME H270-PRO motherboard, it causes errors like these: pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:1c.0: AER: device [8086:a292] error status/mask=00003000/00002000 pcieport 0000:00:1c.0: AER: [12] Timeout pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 pcieport 0000:00:1c.0: AER: can't find device of ID00e0 In addition to flooding the kernel log, this also causes the machine to wake up immediately after suspend is initiated. The device advertises ASPM L0s and L1 support in the Link Capabilities register, but the ASMedia web page for ASM1083 [1] claims "No PCIe ASPM support". Windows 10 (build 2004) enables L0s, but it also logs correctable PCIe errors. Add a quirk to disable ASPM for this device. [1] https://www.asmedia.com.tw/eng/e_show_products.php?cate_index=169&item=114 [bhelgaas: commit log] Fixes: 66ff14e59e8a ("PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208667 Link: https://lore.kernel.org/r/20200722021803.17958-1-hancockrwd@gmail.com Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-25Merge tag 'pci-v5.8-fixes-2' of ↵Linus Torvalds1-21/+9
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into master Pull PCI fixes from Bjorn Helgaas: - Reject invalid IRQ 0 command line argument for virtio_mmio because IRQ 0 now generates warnings (Bjorn Helgaas) - Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms", which broke nouveau (Bjorn Helgaas) * tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms" virtio-mmio: Reject invalid IRQ 0 command line argument
2020-07-22Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"Bjorn Helgaas1-21/+9
This reverts commit ec411e02b7a2e785a4ed9ed283207cd14f48699d. Patrick reported that this commit broke hybrid graphics on a ThinkPad X1 Extreme 2nd with Intel UHD Graphics 630 and NVIDIA GeForce GTX 1650 Mobile: nouveau 0000:01:00.0: fifo: PBDMA0: 01000000 [] ch 0 [00ff992000 DRM] subc 0 mthd 0008 data 00000000 Karol reported that this commit broke Nouveau firmware loading on a Lenovo P1G2 with Intel UHD Graphics 630 and NVIDIA TU117GLM [Quadro T1000 Mobile]: nouveau 0000:01:00.0: acr: AHESASC binary failed In both cases, reverting ec411e02b7a2 solved the problem. Unfortunately, this revert will reintroduce the "Thunderbolt bridges take long time to resume from D3cold" problem: https://bugzilla.kernel.org/show_bug.cgi?id=206837 Link: https://lore.kernel.org/r/CAErSpo5sTeK_my1dEhWp7aHD0xOp87+oHYWkTjbL7ALgDbXo-Q@mail.gmail.com Link: https://lore.kernel.org/r/CACO55tsAEa5GXw5oeJPG=mcn+qxNvspXreJYWDJGZBy5v82JDA@mail.gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=208597 Reported-by: Patrick Volkerding <volkerdi@gmail.com> Reported-by: Karol Herbst <kherbst@redhat.com> Fixes: ec411e02b7a2 ("PCI/PM: Assume ports without DLL Link Active train links in 100 ms") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-14irqdomain/treewide: Keep firmware node unconditionally allocatedThomas Gleixner1-2/+3
Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after creating the irqdomain. The only purpose of these FW nodes is to convey name information. When this was introduced the core code did not store the pointer to the node in the irqdomain. A recent change stored the firmware node pointer in irqdomain for other reasons and missed to notice that the usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence are broken by this. Storing a dangling pointer is dangerous itself, but in case that the domain is destroyed later on this leads to a double free. Remove the freeing of the firmware node after creating the irqdomain from all affected call sites to cure this. Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada2-2/+2
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-12Merge tag 'for-linus-5.8b-rc1-tag' of ↵Linus Torvalds1-17/+10
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - several smaller cleanups - a fix for a Xen guest regression with CPU offlining - a small fix in the xen pvcalls backend driver - an update of MAINTAINERS * tag 'for-linus-5.8b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE xen/pci: Get rid of verbose_request and use dev_dbg() instead xenbus: Use dev_printk() when possible xen-pciback: Use dev_printk() when possible xen: enable BALLOON_MEMORY_HOTPLUG by default xen: expand BALLOON_MEMORY_HOTPLUG description xen/pvcalls: Make pvcalls_back_global static xen/cpuhotplug: Fix initial CPU offlining for PV(H) guests xen-platform: Constify dev_pm_ops xen/pvcalls-back: test for errors when calling backend_connect()
2020-06-08Merge tag 's390-5.8-1' of ↵Linus Torvalds2-19/+36
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for multi-function devices in pci code. - Enable PF-VF linking for architectures using the pdev->no_vf_scan flag (currently just s390). - Add reipl from NVMe support. - Get rid of critical section cleanup in entry.S. - Refactor PNSO CHSC (perform network subchannel operation) in cio and qeth. - QDIO interrupts and error handling fixes and improvements, more refactoring changes. - Align ioremap() with generic code. - Accept requests without the prefetch bit set in vfio-ccw. - Enable path handling via two new regions in vfio-ccw. - Other small fixes and improvements all over the code. * tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits) vfio-ccw: make vfio_ccw_regops variables declarations static vfio-ccw: Add trace for CRW event vfio-ccw: Wire up the CRW irq and CRW region vfio-ccw: Introduce a new CRW region vfio-ccw: Refactor IRQ handlers vfio-ccw: Introduce a new schib region vfio-ccw: Refactor the unregister of the async regions vfio-ccw: Register a chp_event callback for vfio-ccw vfio-ccw: Introduce new helper functions to free/destroy regions vfio-ccw: document possible errors vfio-ccw: Enable transparent CCW IPL from DASD s390/pci: Log new handle in clp_disable_fh() s390/cio, s390/qeth: cleanup PNSO CHSC s390/qdio: remove q->first_to_kick s390/qdio: fix up qdio_start_irq() kerneldoc s390: remove critical section cleanup from entry.S s390: add machine check SIGP s390/pci: ioremap() align with generic code s390/ap: introduce new ap function ap_get_qdev() Documentation/s390: Update / remove developerWorks web links ...
2020-06-08Merge tag 'iommu-updates-v5.8' of ↵Linus Torvalds1-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "A big part of this is a change in how devices get connected to IOMMUs in the core code. It contains the change from the old add_device() / remove_device() to the new probe_device() / release_device() call-backs. As a result functionality that was previously in the IOMMU drivers has been moved to the IOMMU core code, including IOMMU group allocation for each device. The reason for this change was to get more robust allocation of default domains for the iommu groups. A couple of fixes were necessary after this was merged into the IOMMU tree, but there are no known bugs left. The last fix is applied on-top of the merge commit for the topic branches. Other than that change, we have: - Removal of the driver private domain handling in the Intel VT-d driver. This was fragile code and I am glad it is gone now. - More Intel VT-d updates from Lu Baolu: - Nested Shared Virtual Addressing (SVA) support to the Intel VT-d driver - Replacement of the Intel SVM interfaces to the common IOMMU SVA API - SVA Page Request draining support - ARM-SMMU Updates from Will: - Avoid mapping reserved MMIO space on SMMUv3, so that it can be claimed by the PMU driver - Use xarray to manage ASIDs on SMMUv3 - Reword confusing shutdown message - DT compatible string updates - Allow implementations to override the default domain type - A new IOMMU driver for the Allwinner Sun50i platform - Support for ATS gets disabled for untrusted devices (like Thunderbolt devices). This includes a PCI patch, acked by Bjorn. - Some cleanups to the AMD IOMMU driver to make more use of IOMMU core features. - Unification of some printk formats in the Intel and AMD IOMMU drivers and in the IOVA code. - Updates for DT bindings - A number of smaller fixes and cleanups. * tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits) iommu: Check for deferred attach in iommu_group_do_dma_attach() iommu/amd: Remove redundant devid checks iommu/amd: Store dev_data as device iommu private data iommu/amd: Merge private header files iommu/amd: Remove PD_DMA_OPS_MASK iommu/amd: Consolidate domain allocation/freeing iommu/amd: Free page-table in protection_domain_free() iommu/amd: Allocate page-table in protection_domain_init() iommu/amd: Let free_pagetable() not rely on domain->pt_root iommu/amd: Unexport get_dev_data() iommu/vt-d: Fix compile warning iommu/vt-d: Remove real DMA lookup in find_domain iommu/vt-d: Allocate domain info for real DMA sub-devices iommu/vt-d: Only clear real DMA device's context entries iommu: Remove iommu_sva_ops::mm_exit() uacce: Remove mm_exit() op iommu/sun50i: Constify sun50i_iommu_ops iommu/hyper-v: Constify hyperv_ir_domain_ops iommu/vt-d: Use pci_ats_supported() iommu/arm-smmu-v3: Use pci_ats_supported() ...
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds67-1871/+3217
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
2020-06-04Merge branch 'remotes/lorenzo/pci/vmd'Bjorn Helgaas1-2/+4
- Fix vmd resource address calculation using Host Physical Address shadow register (Jon Derrick) * remotes/lorenzo/pci/vmd: PCI: vmd: Filter resource type bits from shadow register
2020-06-04Merge branch 'remotes/lorenzo/pci/v3-semi'Bjorn Helgaas1-1/+1
- Fix memory leak in probe error paths (Christophe JAILLET) * remotes/lorenzo/pci/v3-semi: PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling paths
2020-06-04Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas2-7/+5
- Fix error message for failure to get reset GPIO from DT (Pali Rohár) - Fix runtime PM imbalance on error path (both tegra and tegra194) (Dinghao Liu) * remotes/lorenzo/pci/tegra: PCI: tegra: Fix runtime PM imbalance on error PCI: tegra194: Fix runtime PM imbalance on error PCI: tegra: Fix reporting GPIO error value
2020-06-04Merge branch 'remotes/lorenzo/pci/rcar'Bjorn Helgaas10-1241/+2048
- Fix rcar OB window programming (Andrew Murray) - Add rcar suspend/resume support (Kazufumi Ikeda) - Add r8a77961 to DT binding (Yoshihiro Shimoda) - Rename pcie-rcar.c to pcie-rcar-host.c to make room for endpoint mode (Lad Prabhakar) - Move shareable code to pcie-rcar.c (Lad Prabhakar) - Correct PCIEPAMR mask calculation for "size < 128" (Lad Prabhakar) - Add endpoint support for multiple outbound memory windows (Lad Prabhakar) - Add R-Car PCIe endpoint driver and DT bindings (Lad Prabhakar) * remotes/lorenzo/pci/rcar: MAINTAINERS: Add file patterns for rcar PCI device tree bindings PCI: rcar: Add endpoint mode support dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller PCI: endpoint: Add support to handle multiple base for mapping outbound memory PCI: endpoint: Pass page size as argument to pci_epc_mem_init() PCI: rcar: Fix calculating mask for PCIEPAMR register PCI: rcar: Move shareable code to a common file PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c dt-bindings: pci: rcar: add r8a77961 support PCI: rcar: Add suspend/resume PCI: rcar: Fix incorrect programming of OB windows
2020-06-04Merge branch 'remotes/lorenzo/pci/pci-bridge-emul'Bjorn Helgaas1-30/+31
- Fix conflicts in pci-bridge-emul descriptions of Device Status and Slot Control (Jon Derrick) - Add emulation for more Device Status, Link Control, and Slot Control bits (Jon Derrick) - Improve emulation of reserved bits (Jon Derrick) * remotes/lorenzo/pci/pci-bridge-emul: PCI: pci-bridge-emul: Eliminate the 'reserved' member PCI: pci-bridge-emul: Update for PCIe 5.0 r1.0 PCI: pci-bridge-emul: Fix Root Cap/Status comment PCI: pci-bridge-emul: Fix PCIe bit conflicts
2020-06-04Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas1-20/+62
- Release resource in probe failure path (Wei Hu) - Retry PCI bus D0 entry if device state is invalid (Wei Hu) - Use struct_size() to help avoid type mistakes (Gustavo A. R. Silva) * remotes/lorenzo/pci/hv: PCI: hv: Use struct_size() helper PCI: hv: Retry PCI bus D0 entry on invalid device state PCI: hv: Fix the PCI HyperV probe failure path to release resource properly
2020-06-04Merge branch 'remotes/lorenzo/pci/host-generic'Bjorn Helgaas11-64/+59
- Constify struct pci_ecam_ops (Rob Herring) - Support building as modules (Rob Herring) - Eliminate wrappers for pci_host_common_probe() by using DT match table data (Rob Herring) * remotes/lorenzo/pci/host-generic: PCI: host-generic: Eliminate pci_host_common_probe wrappers PCI: host-generic: Support building as modules PCI: Constify struct pci_ecam_ops # Conflicts: # drivers/pci/controller/dwc/pcie-hisi.c
2020-06-04Merge branch 'remotes/lorenzo/pci/endpoint'Bjorn Helgaas1-0/+3
- Avoid NULL pointer dereference in dma_release_channel() (Kunihiko Hayashi) * remotes/lorenzo/pci/endpoint: PCI: endpoint: functions/pci-epf-test: Fix DMA channel release
2020-06-04Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas11-20/+414
- Simplify computation of msix_tbl (Jiri Slaby) - Make hisi_pcie_platform_ops static (Zou Wei) - Warn about resources above 4G (Alan Mikhak) - Make intel_pcie_cpu_addr() static (Jason Yan) - Use devm_platform_ioremap_resource_byname() to simplify code and improve error checking (Wei Yongjun) - Fix inner MSI IRQ domain registration so it doesn't confuse debugfs (Marc Zyngier) - Don't use FAST_LINK_MODE on meson (Marc Zyngier) - Add Socionext UniPhier Pro5 PCIe endpoint controller driver and DT description (Kunihiko Hayashi) * remotes/lorenzo/pci/dwc: PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() PCI: dwc: intel: Make intel_pcie_cpu_addr() static PCI: dwc: Program outbound ATU upper limit register PCI: dwc: Make hisi_pcie_platform_ops static PCI: dwc: Clean up computing of msix_tbl
2020-06-04Merge branch 'remotes/lorenzo/pci/cadence'Bjorn Helgaas2-12/+4
- Deprecate 'cdns,max-outbound-regions' and 'cdns,no-bar-match-nbits' bindings in favor of deriving them from 'ranges' and 'dma-ranges' (Kishon Vijay Abraham I) - Read Vendor and Device ID as 32 bits (not 16) from DT (Kishon Vijay Abraham I) * remotes/lorenzo/pci/cadence: PCI: cadence: Fix to read 32-bit Vendor ID/Device ID property from DT PCI: cadence: Remove "cdns,max-outbound-regions" DT property dt-bindings: PCI: cadence: Deprecate inbound/outbound specific bindings
2020-06-04Merge branch 'remotes/lorenzo/pci/brcmstb'Bjorn Helgaas1-4/+33
- Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Remove unnecessary clk_put(); devm_clk_get() handles this automatically (Jim Quinlan) - Fix outbound memory window register stride offset (Jim Quinlan) - Add "aspm-no-l0s" property for brcmstb and disable ASPM L0s when present (Jim Quinlan) - Add property to notify Raspberry Pi firmware of xHCI reset (Nicolas Saenz Julienne) - Add Raspberry Pi VL805 xHCI init function to trigger VL805 firmware load (Nicolas Saenz Julienne) - Wait in brcmstb probe for Raspberry Pi VL805 firmware initialization (Nicolas Saenz Julienne) - Load Raspberry Pi VL805 firmware in USB early handoff quirk (Nicolas Saenz Julienne) * remotes/lorenzo/pci/brcmstb: USB: pci-quirks: Add Raspberry Pi 4 quirk PCI: brcmstb: Wait for Raspberry Pi's firmware when present firmware: raspberrypi: Introduce vl805 init routine soc: bcm2835: Add notify xHCI reset property PCI: brcmstb: Disable L0s component of ASPM if requested dt-bindings: PCI: brcmstb: New prop 'aspm-no-l0s' PCI: brcmstb: Fix window register offset from 4 to 8 PCI: brcmstb: Don't clk_put() a managed clock PCI: brcmstb: Assert fundamental reset on initialization
2020-06-04Merge branch 'remotes/lorenzo/pci/altera'Bjorn Helgaas1-1/+1
- Fix altera whitespace (Colin Ian King) * remotes/lorenzo/pci/altera: PCI: altera: Clean up indentation issue on a return statement
2020-06-04Merge branch 'remotes/lorenzo/pci/aardvark'Bjorn Helgaas2-45/+220
- Train link immediately after enabling link training to avoid issues with Compex WLE900VX and Turris MOX devices (Pali Rohár) - Remove ASPM config and let the PCI core do it (Pali Rohár) - Interpret zero 'max-link-speed' value as invalid (Pali Rohár) - Respect the 'max-link-speed' property and improve link training (Marek Behún) - Issue PERST via GPIO (Pali Rohár) - Add PHY support (Marek Behún) - Use standard PCIe capability macros (Pali Rohár) - Document new 'max-link-speed', 'phys', and 'reset-gpios' properties (Marek Behún) * remotes/lorenzo/pci/aardvark: dt-bindings: PCI: aardvark: Describe new properties PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros PCI: aardvark: Add PHY support PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access PCI: aardvark: Issue PERST via GPIO PCI: aardvark: Improve link training PCI: of: Zero max-link-speed value is invalid PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register PCI: aardvark: Train link immediately after enabling training
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-11 21:45:01 +0300