| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert)
- Fix for DMA coherent devices on Power
- Rework and simplify the DT phandle cache code
- DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART,
STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC,
STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010,
DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks,
Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI,
Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM,
Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI
- New binding schemas for SATA and PATA controllers, TI and Infineon VR
controllers, MAX31730
- New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt,
renesas,etheravb-r8a77961
- Add USB 'super-speed-plus' as a documented speed
- Vendor prefixes for broadmobi, calaosystems, kam, and mps
- Clean-up the multiple flavors of ST-Ericsson vendor prefixes
* tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles"
of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc
dt-bindings: leds: Convert gpio-leds to DT schema
dt-bindings: leds: Convert common LED binding to schema
dt-bindings: PCI: Convert generic host binding to DT schema
dt-bindings: PCI: Convert Arm Versatile binding to DT schema
dt-bindings: Be explicit about installing deps
dt-bindings: stm32: convert dfsdm to json-schema
dt-bindings: serial: Convert STM32 UART to json-schema
dt-bindings: serial: Convert rs485 bindings to json-schema
dt-bindings: timer: Use non-empty ranges in example
dt-bindings: arm-boards: typo fix
dt-bindings: Add TI and Infineon VR Controllers as trivial devices
dt-binding: usb: add "super-speed-plus"
dt-bindings: rcar-csi2: Convert bindings to json-schema
dt-bindings: iio: adc: ad7606: Fix wrong maxItems value
dt-bindings: Convert Faraday FTIDE010 to DT schema
dt-bindings: Create DT bindings for PATA controllers
dt-bindings: Create DT bindings for SATA controllers
dt: bindings: add vendor prefix for Kamstrup A/S
...
|
|
There's an OF helper called of_dma_is_coherent(), which checks if a
device has a "dma-coherent" property to see if the device is coherent
for DMA.
But on some platforms devices are coherent by default, and on some
platforms it's not possible to update existing device trees to add the
"dma-coherent" property.
So add a Kconfig symbol to allow arch code to tell
of_dma_is_coherent() that devices are coherent by default, regardless
of the presence of the property.
Select that symbol on powerpc when NOT_COHERENT_CACHE is not set, ie.
when the system has a coherent cache.
Fixes: 92ea637edea3 ("of: introduce of_dma_is_coherent() helper")
Cc: stable@vger.kernel.org # v3.16+
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
There used to be blank lines between assignment and check of the
__of_changeset_revert_entries() result, to make the phandle cache
management operations stand out. After the removal of those operations
in commit 90dc0d1ce890419f ("of: Rework and simplify phandle cache to
use a fixed size"), there is no longer a reason to have such a blank
line.
Remove the blank line, to rejoin visibly the status assignement and
check, and to match coding style.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
When parsing a PHY node, register its time stamper, if any, and attach
the instance to the PHY device.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phandle cache was added to speed up of_find_node_by_phandle() by
avoiding walking the whole DT to find a matching phandle. The
implementation has several shortcomings:
- The cache is designed to work on a linear set of phandle values.
This is true for dtc generated DTs, but not for other cases such as
Power.
- The cache isn't enabled until of_core_init() and a typical system
may see hundreds of calls to of_find_node_by_phandle() before that
point.
- The cache is freed and re-allocated when the number of phandles
changes.
- It takes a raw spinlock around a memory allocation which breaks on
RT.
Change the implementation to a fixed size and use hash_32() as the
cache index. This greatly simplifies the implementation. It avoids
the need for any re-alloc of the cache and taking a reference on nodes
in the cache. We only have a single source of removing cache entries
which is of_detach_node().
Using hash_32() removes any assumption on phandle values improving
the hit rate for non-linear phandle values. The effect on linear values
using hash_32() is about a 10% collision. The chances of thrashing on
colliding values seems to be low.
To compare performance, I used a RK3399 board which is a pretty typical
system. I found that just measuring boot time as done previously is
noisy and may be impacted by other things. Also bringing up secondary
cores causes some issues with measuring, so I booted with 'nr_cpus=1'.
With no caching, calls to of_find_node_by_phandle() take about 20124 us
for 1248 calls. There's an additional 288 calls before time keeping is
up. Using the average time per hit/miss with the cache, we can calculate
these calls to take 690 us (277 hit / 11 miss) with a 128 entry cache
and 13319 us with no cache or an uninitialized cache.
Comparing the 3 implementations the time spent in
of_find_node_by_phandle() is:
no cache: 20124 us (+ 13319 us)
128 entry cache: 5134 us (+ 690 us)
current cache: 819 us (+ 13319 us)
We could move the allocation of the cache earlier to improve the
current cache, but that just further complicates the situation as it
needs to be after slab is up, so we can't do it when unflattening (which
uses memblock).
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
|
|
This patch exports of_mdiobus_child_is_phy, allowing to check if a child
node is a network PHY.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 5e6669387e22 ("of/platform: Pause/resume sync state during init
and of_platform_populate()") paused/resumed sync state during init only
if Linux had parsed and populated a devicetree.
However, the check for that (of_have_populated_dt()) can change after
of_platform_default_populate_init() executes. One example of this is
when devicetree unittests are enabled. This causes an unmatched
pause/resume of sync state. To avoid this, just unconditionally
pause/resume sync state during init.
Fixes: 5e6669387e22 ("of/platform: Pause/resume sync state during init and of_platform_populate()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
- DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
interconnect, Unisoc/Spreadtrum SoCs and UART
- Convert a bunch of Samsung bindings to DT schema
- Convert a bunch of ST stm32 bindings to DT schema
- Realtek and Exynos additions to Arm Mali bindings
- Fix schema errors in RiscV CPU schema
- Various schema fixes from improved meta-schema checks
- Improve the handling of 'dma-ranges' and in particular fix DMA mask
setup on PCI bridges
- Fix a memory leak in add_changeset_property() and DT unit tests.
- Several documentation improvements for schema validation
- Rework build rules to improve schema validation errors
- Color output for dtx_diff
* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
dt-bindings: arm: Remove leftover axentia.txt
of: unittest: fix memory leak in attach_node_and_children
of: overlay: add_changeset_property() memory leak
dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
dt-bindings: power: Rename back power_domain.txt bindings to fix references
dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
dt-bindings: remoteproc: convert stm32-rproc to json-schema
dt-bindings: mailbox: convert stm32-ipcc to json-schema
dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
dt-bindings: rng: Convert stm32 RNG bindings to json-schema
dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
dt-bindings: pwm: Convert PWM bindings to json-schema
dt-bindings: serial: Add a new compatible string for SC9863A
dt-bindings: serial: Convert sprd-uart to json-schema
dt-bindings: arm: Add bindings for Unisoc SC9863A
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using DMA offsets
(Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
dma-mapping: treat dev->bus_dma_mask as a DMA limit
dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
dma-direct: don't check swiotlb=force in dma_direct_map_resource
dma-debug: clean up put_hash_bucket()
powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
dma-direct: avoid a forward declaration for phys_to_dma
dma-direct: unify the dma_capable definitions
dma-mapping: drop the dev argument to arch_sync_dma_for_*
x86/PCI: sta2x11: use default DMA address translation
dma-direct: check for overflows on 32 bit DMA addresses
dma-debug: increase HASH_SIZE
dma-debug: reorder struct dma_debug_entry fields
xtensa: use the generic uncached segment support
dma-mapping: merge the generic remapping helpers into dma-direct
dma-direct: provide mmap and get_sgtable method overrides
dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
dma-direct: remove __dma_direct_free_pages
usb: core: Remove redundant vmap checks
kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
dma-debug: add a schedule point in debug_dma_dump_mappings()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of
the patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs
apis so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over
time, it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules
and have it "just work" for a variety of platforms (like a distro
kernel). The big problem turned out to be a lack of dependency
information between different areas of DT entries, and the work here
resolves that problem and now allows devices to boot properly, and
quicker than a monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues"
* tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits)
tracing: Remove unnecessary DEBUG_FS dependency
of: property: Add device link support for interrupt-parent, dmas and -gpio(s)
debugfs: Fix !DEBUG_FS debugfs_create_automount
of: property: Add device link support for "iommu-map"
of: property: Fix the semantics of of_is_ancestor_of()
i2c: of: Populate fwnode in of_i2c_get_board_info()
drivers: base: Fix Kconfig indentation
firmware_loader: Fix labels with comma for builtin firmware
driver core: Allow device link operations inside sync_state()
driver core: platform: Declare ret variable only once
cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h>
crypto: hisilicon: no need to check return value of debugfs_create functions
driver core: platform: use the correct callback type for bus_find_device
firmware_class: make firmware caching configurable
driver core: Clarify documentation for fwnode_operations.add_links()
mailbox: tegra: Fix superfluous IRQ error message
net: caif: Fix debugfs on 64-bit platforms
mac80211: Use debugfs_create_xul() helper
media: c8sectpfe: no need to check return value of debugfs_create functions
of: property: Add device link support for iommus, mboxes and io-channels
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"Add support for printing fwnode names using a new conversion specifier
"%pfw" (Sakari Ailus), clean up the software node and
efi/apple-properties code in preparation for improved software node
reference properties handling (Dmitry Torokhov) and fix the struct
fwnode_operations description (Heikki Krogerus)"
* tag 'devprop-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
software node: simplify property_entry_read_string_array()
software node: unify PROPERTY_ENTRY_XXX macros
software node: remove property_entry_read_uNN_array functions
software node: get rid of property_set_pointer()
software node: clean up property_copy_string_array()
software node: mark internal macros with double underscores
efi/apple-properties: use PROPERTY_ENTRY_U8_ARRAY_LEN
software node: introduce PROPERTY_ENTRY_XXX_ARRAY_LEN()
software node: remove DEV_PROP_MAX
device property: Fix the description of struct fwnode_operations
lib/test_printf: Add tests for %pfw printk modifier
lib/vsprintf: Add %pfw conversion specifier for printing fwnode names
lib/vsprintf: OF nodes are first and foremost, struct device_nodes
lib/vsprintf: Make use of fwnode API to obtain node names and separators
lib/vsprintf: Add a note on re-using %pf or %pF
lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps
device property: Add a function to obtain a node's prefix
device property: Add fwnode_get_name for returning the name of a node
device property: Add functions for accessing node's parents
device property: Move fwnode_get_parent() up
...
|
|
In attach_node_and_children memory is allocated for full_name via
kasprintf. If the condition of the 1st if is not met the function
returns early without freeing the memory. Add a kfree() to fix that.
This has been detected with kmemleak:
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205327
It looks like the leak was introduced by this commit:
Fixes: 5babefb7f7ab ("of: unittest: allow base devicetree to have symbol metadata")
Signed-off-by: Erhard Furtner <erhard_f@mailbox.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
No changeset entries are created for #address-cells and #size-cells
properties, but the duplicated properties are never freed. This
results in a memory leak which is detected by kmemleak:
unreferenced object 0x85887180 (size 64):
backtrace:
kmem_cache_alloc_trace+0x1fb/0x1fc
__of_prop_dup+0x25/0x7c
add_changeset_property+0x17f/0x370
build_changeset_next_level+0x29/0x20c
of_overlay_fdt_apply+0x32b/0x6b4
...
Fixes: 6f75118800ac ("of: overlay: validate overlay properties #address-cells and #size-cells")
Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
|
|
Add support for creating device links out of more DT properties.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191120071302.227777-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using a mask to represent bus DMA constraints has a set of limitations.
The biggest one being it can only hold a power of two (minus one). The
DMA mapping code is already aware of this and treats dev->bus_dma_mask
as a limit. This quirk is already used by some architectures although
still rare.
With the introduction of the Raspberry Pi 4 we've found a new contender
for the use of bus DMA limits, as its PCIe bus can only address the
lower 3GB of memory (of a total of 4GB). This is impossible to represent
with a mask. To make things worse the device-tree code rounds non power
of two bus DMA limits to the next power of two, which is unacceptable in
this case.
In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all
over the tree and treat it as such. Note that dev->bus_dma_limit should
contain the higher accessible DMA address.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 8e12257dead7 ("of: property: Add device link support for iommus,
mboxes and io-channels") added device link support for IOMMU linkages
described using the "iommus" property. For PCI devices, this property
is not present and instead the "iommu-map" property is used on the host
bridge node to map the endpoint RequesterIDs to their corresponding
IOMMU instance.
Add support for "iommu-map" to the device link supplier bindings so that
probing of PCI devices can be deferred until after the IOMMU is
available.
Cc: Rob Herring <robh@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20191120190028.4722-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The of_is_ancestor_of() function was renamed from of_link_is_valid()
based on review feedback. The rename meant the semantics of the function
had to be inverted, but this was missed in the earlier patch.
So, fix the semantics of of_is_ancestor_of() and invert the conditional
expressions where it is used.
Fixes: a3e1d1a7f5fc ("of: property: Add functional dependency link from DT bindings")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20191120080230.16007-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Property fetching functions which return number of successfully fetched
properties should not state that out-values are only modified if 0 is
returned. Fix this. Also, "pointer to return value" is slightly suboptimal
phrase as "return value" commonly refers to value function returns (not via
arguments). Rather use "pointer to found values".
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add support for creating device links out of more DT properties.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191105065000.50407-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a DEFINE_SIMPLE_PROP macro to make it easy to add support for simple
properties with fixed names that just list phandles and phandle args.
Add a DEFINE_SUFFIX_PROP macro to make it easy to add support for
properties with fixes suffix that just list phandles and phandle args.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191105065000.50407-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adding a debug log instead of silently ignoring a phandle for an early
device. Also, return the right error code instead of 0 even though the
actual execution flow won't change.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191105065000.50407-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before this change of_get_phy_mode() returned an enum,
phy_interface_t. On error, -ENODEV etc, is returned. If the result of
the function is stored in a variable of type phy_interface_t, and the
compiler has decided to represent this as an unsigned int, comparision
with -ENODEV etc, is a signed vs unsigned comparision.
Fix this problem by changing the API. Make the function return an
error, or 0 on success, and pass a pointer, of type phy_interface_t,
where the phy mode should be stored.
v2:
Return with *interface set to PHY_INTERFACE_MODE_NA on error.
Add error checks to all users of of_get_phy_mode()
Fixup a few reverse christmas tree errors
Fixup a few slightly malformed reverse christmas trees
v3:
Fix 0-day reported errors.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some devices need to be initialized really early and can't wait for
driver core or drivers to be functional. These devices are typically
initialized without creating a struct device for their device nodes.
If a supplier ends up being one of these devices, skip trying to add
device links to them.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20191028220027.251605-6-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When creating device links to proxy the sync_state() needs of child
dependencies, create SYNC_STATE_ONLY device links so that children
dependencies don't block probing of the parent.
Also, differentiate between missing suppliers of parent device vs
missing suppliers of child devices so that driver core doesn't block
parent device probing when only child supplier dependencies are missing.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20191028220027.251605-5-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the sysfs fix in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
Commit d698a388146c ("of: reserved-memory: ignore disabled memory-region
nodes") added an early return in of_reserved_mem_device_init_by_idx(), but
didn't call of_node_put() on a device_node whose ref-count was incremented
in the call to of_parse_phandle() preceding the early exit.
Fixes: d698a388146c ("of: reserved-memory: ignore disabled memory-region nodes")
Signed-off-by: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In unittest_data_add, a copy buffer is created via kmemdup. This buffer
is leaked if of_fdt_unflatten_tree fails. The release for the
unittest_data buffer is added.
Fixes: b951f9dc7f25 ("Enabling OF selftest to run without machine's devicetree")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of
pr_warning"), removing pr_warning so all logging messages use a
consistent <prefix>_warn style. Let's do it.
Link: http://lkml.kernel.org/r/20191018031850.48498-16-wangkefeng.wang@huawei.com
To: linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Better variable and function names. Remove "," after the sentinel in an
array initialization list.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191011191521.179614-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The prefix is used for printing purpose before a node, and it also works
as a separator between two nodes.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org> (for OF)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The fwnode framework did not have means to obtain the name of a node. Add
that now, in form of the fwnode_get_name() function and a corresponding
get_name fwnode op. OF and ACPI support is included.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org> (for OF)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since the "dma-ranges" property is only valid for a node representing a
bus, of_dma_get_range() currently assumes the node passed in is a leaf
representing a device, and starts the walk from its parent. In cases
like PCI host controllers on typical FDT systems, however, where the PCI
endpoints are probed dynamically the initial leaf node represents the
'bus' itself, and this logic means we fail to consider any "dma-ranges"
describing the host bridge itself. Rework the logic such that
of_dma_get_range() also works correctly starting from a bus node
containing "dma-ranges".
While this does mean "dma-ranges" could incorrectly be in a device leaf
node, there isn't really any way in this function to ensure that a leaf
node is or isn't a bus node.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[robh: Allow for the bus child node to still be passed in]
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
|
|
of_pci_range_parser_one() has a bug when parsing dma-ranges. When it
translates the parent address (aka cpu address in the code), 'ranges' is
always being used. This happens to work because most users are just 1:1
translation.
Cc: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
'dma-ranges' frequently exists without parent nodes having 'dma-ranges'.
While this is an error for 'ranges', this is fine because DMA capable
devices always have a translatable DMA address. Also, with no
'dma-ranges' at all, the assumption is that DMA addresses are 1:1 with
no restrictions unless perhaps the device itself has implicit
restrictions.
Cc: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The functions for parsing 'dma-ranges' ranges are buggy and fail to
handle several conditions. Add new tests for of_dma_get_range() and
for_each_of_pci_range().
With this test, we get 5 new failures which are fixed in subsequent
commits:
OF: translation of DMA address(0) to CPU address failed node(/testcase-data/address-tests/device@70000000)
FAIL of_unittest_dma_ranges_one():798 of_dma_get_range failed on node /testcase-data/address-tests/device@70000000 rc=-22
OF: translation of DMA address(10000000) to CPU address failed node(/testcase-data/address-tests/bus@80000000/device@1000)
FAIL of_unittest_dma_ranges_one():798 of_dma_get_range failed on node /testcase-data/address-tests/bus@80000000/device@1000 rc=-22
OF: translation of DMA address(0) to CPU address failed node(/testcase-data/address-tests/pci@90000000)
FAIL of_unittest_dma_ranges_one():798 of_dma_get_range failed on node /testcase-data/address-tests/pci@90000000 rc=-22
FAIL of_unittest_pci_dma_ranges():851 for_each_of_pci_range wrong CPU addr (d0000000) on node /testcase-data/address-tests/pci@90000000
FAIL of_unittest_pci_dma_ranges():861 for_each_of_pci_range wrong CPU addr (ffffffffffffffff) on node /testcase-data/address-tests/pci@90000000
Cc: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In some cases such as PCI host controllers, we may have a "parent bus"
which is an OF leaf node, but still need to correctly parse ranges from
the point of view of that bus. For that, factor out variants of the
"#addr-cells" and "#size-cells" parsers which do not assume they have a
device node and thus immediately traverse upwards before reading the
relevant property.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[robh: don't make of_bus_n_{addr,size}_cells() public]
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Much like for address translation, when checking for DMA coherence we
should be sure to walk up the DMA hierarchy, rather than the MMIO one,
now that we can accommodate them being different.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add of_get_next_dma_parent() helper which is similar to
__of_get_dma_parent(), but can be used in iterators and decrements the
ref count on the prior parent.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
If we failed to translate a DMA address, at least show the offending
address rather than the uninitialised contents of the destination
argument.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
of_dma_get_range() is only used within the DT core code, so remove the
export and move the header declaration to the private header.
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
of_find_matching_node_by_address() is unused, so remove it.
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
A parent device can have child devices that it adds when it probes. But
this probing of the parent device can happen way after kernel init is done
-- for example, when the parent device's driver is loaded as a module.
In such cases, if the child devices depend on a supplier in the system, we
need to make sure the supplier gets the sync_state() callback only after
these child devices are added and probed.
To achieve this, when creating device links for a device by looking at its
DT node, don't just look at DT references at the top node level. Look at DT
references in all the descendant nodes too and create device links from the
ancestor device to all these supplier devices.
This way, when the parent device probes and adds child devices, the child
devices can then create their own device links to the suppliers and further
delay the supplier's sync_state() callback to after the child devices are
probed.
Example:
In this illustration, -> denotes DT references and indentation
represents child status.
Device node A
Device node B -> D
Device node C -> B, D
Device node D
Assume all these devices have their drivers loaded as modules.
Without this patch, this is the sequence of events:
1. D is added.
2. A is added.
3. Device D probes.
4. Device D gets its sync_state() callback.
5. Device B and C might malfunction because their resources got
altered/turned off before they can make active requests for them.
With this patch, this is the sequence of events:
1. D is added.
2. A is added and creates device links to D.
3. Device link from A to B is not added because A is a parent of B.
4. Device D probes.
5. Device D does not get it's sync_state() callback because consumer A
hasn't probed yet.
5. Device A probes.
5. a. Devices B and C are added.
5. b. Device links from B and C to D are added.
5. c. Device A's probe completes.
6. Device D does not get it's sync_state() callback because consumer A
has probed but consumers B and C haven't probed yet.
7. Device B and C probe.
8. Device D gets it's sync_state() callback because all its consumers
have probed.
9. None of the devices malfunction.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20190904211126.47518-7-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When all the top level devices are populated from DT during kernel
init, the supplier devices could be added and probed before the
consumer devices are added and linked to the suppliers. To avoid the
sync_state() callback from being called prematurely, pause the
sync_state() callbacks before populating the devices and resume them
at late_initcall_sync().
Similarly, when children devices are populated from a module using
of_platform_populate(), there could be supplier-consumer dependencies
between the children devices that are populated. To avoid the same
problem with sync_state() being called prematurely, pause and resume
sync_state() callbacks across of_platform_populate().
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20190904211126.47518-6-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add device links after the devices are created (but before they are
probed) by looking at common DT bindings like clocks and
interconnects.
Automatically adding device links for functional dependencies at the
framework level provides the following benefits:
- Optimizes device probe order and avoids the useless work of
attempting probes of devices that will not probe successfully
(because their suppliers aren't present or haven't probed yet).
For example, in a commonly available mobile SoC, registering just
one consumer device's driver at an initcall level earlier than the
supplier device's driver causes 11 failed probe attempts before the
consumer device probes successfully. This was with a kernel with all
the drivers statically compiled in. This problem gets a lot worse if
all the drivers are loaded as modules without direct symbol
dependencies.
- Supplier devices like clock providers, interconnect providers, etc
need to keep the resources they provide active and at a particular
state(s) during boot up even if their current set of consumers don't
request the resource to be active. This is because the rest of the
consumers might not have probed yet and turning off the resource
before all the consumers have probed could lead to a hang or
undesired user experience.
Some frameworks (Eg: regulator) handle this today by turning off
"unused" resources at late_initcall_sync and hoping all the devices
have probed by then. This is not a valid assumption for systems with
loadable modules. Other frameworks (Eg: clock) just don't handle
this due to the lack of a clear signal for when they can turn off
resources. This leads to downstream hacks to handle cases like this
that can easily be solved in the upstream kernel.
By linking devices before they are probed, we give suppliers a clear
count of the number of dependent consumers. Once all of the
consumers are active, the suppliers can turn off the unused
resources without making assumptions about the number of consumers.
By default we just add device-links to track "driver presence" (probe
succeeded) of the supplier device. If any other functionality provided
by device-links are needed, it is left to the consumer/supplier
devices to change the link when they probe.
kbuild test robot reported clang error about missing const
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If of_setup_earlycon we should keep on iterating earlycon options
instead of breaking out of the loop.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
|
