summaryrefslogtreecommitdiff
path: root/drivers/of/of_mdio.c
AgeCommit message (Collapse)AuthorFilesLines
2016-11-30of_mdio: add helper to deregister fixed-link PHYsJohan Hovold1-0/+15
Add helper to deregister fixed-link PHYs registered using of_phy_register_fixed_link(). Convert the two drivers that care to deregister their fixed-link PHYs to use the new helper, but note that most drivers currently fail to do so. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17of_mdio: fix device reference leak in of_phy_find_deviceJohan Hovold1-0/+1
Make sure to drop the reference taken by bus_find_device() before returning NULL from of_phy_find_device() when the found device is not a PHY. Fixes: 6ed742363b9c ("of: of_mdio: Ensure mdio device is a PHY") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17of_mdio: fix node leak in of_phy_register_fixed_link error pathJohan Hovold1-1/+4
Make sure to drop the of_node reference also on failure to parse the speed property in of_phy_register_fixed_link(). Fixes: 3be2a49e5c08 ("of: provide a binding for fixed link PHYs") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-17of_mdio: Abstract a general interface for phy connectDongpo Li1-0/+36
Abstract a general interface "of_phy_get_and_connect" for PHY connect. User will have no bother with getting "phy-mode" and "phy-handle" any more. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28of_mdio: select fixed phy support unconditionallyArnd Bergmann1-2/+0
Calling the fixed-phy functions when CONFIG_FIXED_PHY=m as a previous change tried cannot work if the caller is in built-in code: drivers/of/built-in.o: In function `of_phy_register_fixed_link': of_reserved_mem.c:(.text+0x85e0): undefined reference to `fixed_phy_register' Making of_mdio depend on 'FIXED_PHY || !FIXED_PHY' would solve this dependency by enforcing that OF_MDIO itself becomes a loadable module when FIXED_PHY=y, but that creates a different dependency as it breaks any built-in ethernet driver that uses of_mdio. Making FIXED_PHY a bool option also cannot work, since it depends on PHYLIB, which again is tristate. This version now uses 'select FIXED_PHY' to ensure that the fixed-phy portion of of_mdio is not optional. The main downside of this is a small increase in code size for cases that do not need fixed phy support, but it should avoid all of the link-time problems. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: d1bd330a229f ("of_mdio: Enable fixed PHY support if driver is a module") Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23of_mdio: Enable fixed PHY support if driver is a moduleBen Hutchings1-1/+1
The fixed_phy driver doesn't have to be built-in, and it's important that of_mdio supports it even if it's a module. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02of: of_mdio: Check if MDIO bus controller is availableFlorian Fainelli1-0/+4
Add a check whether the 'struct device_node' pointer passed to of_mdiobus_register() is an available (aka enabled) node in the Device Tree. Rationale for doing this are cases where an Ethernet MAC provides a MDIO bus controller and node, and an additional Ethernet MAC might be connecting its PHY/switches to that first MDIO bus controller, while still embedding one internally which is therefore marked as "disabled". Instead of sprinkling checks like these in callers of of_mdiobus_register(), do this in a central location. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26of_mdio: get_phy_device() doesn't return NULL anymoreSergei Shtylyov1-1/+1
Now that get_phy_device() no longer returns NULL on error, we don't need to check for it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-19of_mdio: make of_mdiobus_register_{device|phy}() *void*Sergei Shtylyov1-13/+8
The results of of_mdiobus_register_{device|phy}() are never checked, so we can make both these functions *void*... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14of_mdio: use PTR_ERR_OR_ZERO()Sergei Shtylyov1-3/+3
PTR_ERR_OR_ZERO() is open coded in of_phy_register_fixed_link(), so just call it directly... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14of_mdio: use IS_ERR_OR_NULL()Sergei Shtylyov1-1/+1
IS_ERR_OR_NULL() is open coded in of_mdiobus_register_phy(), so just call it directly... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14of_mdio: mdio_device_create() never returns NULLSergei Shtylyov1-1/+1
mdio_device_create() never returns NULL, thus checking for it in of_mdiobus_register_device() is pointless... Suggested-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Several cases of overlapping changes, as well as one instance (vxlan) of a bug fix in 'net' overlapping with code movement in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02of_mdio: fix kernel-doc for of_phy_connect()Sergei Shtylyov1-0/+1
The 'flags' parameter of the of_phy_connect() function wasn't described in the kernel-doc comment... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02of_mdio: kill useless variable in of_mdiobus_register()Sergei Shtylyov1-3/+1
of_mdiobus_register() declares the 'paddr' variable to hold the result of the of_get_property() but only uses it once after that while the function can be called directly from the *if* statement. Remove that variable and switch to calling of_find_property() instead since we don't care about the "reg" property's value anyway... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-09of: of_mdio: Add marvell, 88e1145 to whitelist of PHY compatibilities.Aaro Koskinen1-0/+1
Commit ae461131960b ("of: of_mdio: Add a whitelist of PHY compatibilities.") missed one compatible string used in in-tree DTBs: in OCTEON, for selected boards, the kernel DTB pruning code will overwrite the DTB compatible string with "marvell,88e1145", which is missing from the whitelist. Add it. The patch fixes broken networking on EdgeRouter Lite. Fixes: ae461131960b ("of: of_mdio: Add a whitelist of PHY compatibilities.") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29of: of_mdio: Add a whitelist of PHY compatibilities.Andrew Lunn1-0/+27
Some phy nodes list a compatible value indicating the PHY make/model. This is never used to match the device to the driver. However it does confuse the code to separate a PHY from a generic MDIO device like a switch. Generic MDIO devices must have a compatible value, PHYs can list clause 22 or 45, but nothing else. Issue a warning if we find a compatible value known on the whitelist, and say it is a PHY. Fixes: a9049e0c513c ("mdio: Add support for mdio drivers.") Reported-by: Aaro Koskinen <aaro.koskinen@nokia.com> Reported-by: Olof Johansson <olof@lixom.net> Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29of: of_mdio: Ensure mdio device is a PHYAndrew Lunn1-1/+9
of_phy_find_device() is used to find the phy device associated with a device node. It is expected the node is for a PHY device, but in fact it could of been probed as a generic MDIO device. Ensure the device is a PHY before returning it. Fixes: a9049e0c513c ("mdio: Add support for mdio drivers.") Reported-by: Aaro Koskinen <aaro.koskinen@nokia.com> Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12mdio: remove an unneed conditionDan Carpenter1-4/+2
It used to be that mdio->irq was a pointer but after e7f4dc3536a4 ('mdio: Move allocation of interrupts into core') it's an array inside the mdio struct so it can never be NULL. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Add support for mdio drivers.Andrew Lunn1-0/+33
Not all devices on an MDIO bus are PHYs. Meaning not all MDIO drivers are PHY drivers. Add support for generic MDIO drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn1-1/+1
Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07of: phy: Only register a phy device for physAndrew Lunn1-7/+34
We will soon support devices other than phys on the mdio bus. Look at a child's compatibility string to determine if it is a phy, before registering a phy device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn1-3/+3
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn1-6/+1
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25of_mdio: fix MDIO phy device refcountingRussell King1-4/+23
bus_find_device() is defined as: * This is similar to the bus_for_each_dev() function above, but it * returns a reference to a device that is 'found' for later use, as * determined by the @match callback. and it does indeed return a reference-counted pointer to the device: while ((dev = next_device(&i))) if (match(dev, data) && get_device(dev)) ^^^^^^^^^^^^^^^ break; klist_iter_exit(&i); return dev; What that means is that when we're done with the struct device, we must drop that reference. Neither of_phy_connect() nor of_phy_attach() did this when phy_connect_direct() or phy_attach_direct() failed. With our previous patch, phy_connect_direct() and phy_attach_direct() take a new refcount on the phy device when successful, so we can drop our local reference immediatley after these functions, whether or not they succeeded. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01phy: fixed_phy: Add gpio to determine link up/down.Andrew Lunn1-3/+10
An SFP module may have a link up/down status pin which can be connection to a GPIO line of the host. Add support for reading such an GPIO in the fixed_phy driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-22of_mdio: add new DT property 'managed' to specify the PHY management typeStas Sergeev1-2/+17
Currently the PHY management type is selected by the MAC driver arbitrary. The decision is based on the presence of the "fixed-link" node and on a will of the driver's authors. This caused a regression recently, when mvneta driver suddenly started to use the in-band status for auto-negotiation on fixed links. It appears the auto-negotiation may not work when expected by the MAC driver. Sebastien Rannou explains: << Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with inband status) is connected to the switch through QSGMII, and in this context we are on the media side of the PHY. >> https://lkml.org/lkml/2015/7/10/206 This patch introduces the new string property 'managed' that allows the user to set the management type explicitly. The supported values are: "auto" - default. Uses either MDIO or nothing, depending on the presence of the fixed-link node "in-band-status" - use in-band status Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> CC: Rob Herring <robh+dt@kernel.org> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Grant Likely <grant.likely@linaro.org> CC: devicetree@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14of: mdio: Add a "broken-turn-around" propertyFlorian Fainelli1-0/+3
Some Ethernet PHY devices/switches may not properly release the MDIO bus during turn-around time, and fail to drive it low, which can be seen by some controllers as a read failure, while the data clocked in is still correct. Add a boolean property "broken-turn-around" which is parsed by the generic MDIO bus probing code and will set the corresponding bit in the MDIO bus phy_ignore_ta_mask bitmask for MDIO bus drivers to utilize that information. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12of: mdio: export of_mdio_parse_addrFlorian Fainelli1-1/+2
Export of_mdio_parse_addr() which allows parsing a given Ethernet PHY node MDIO address, verify it is within the allowed range, and return its value. This is going to be useful for the DSA code which needs to deal with multiple layers of MDIO buses. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net: phy: adjust fixed_phy_register() return valuePetri Gynther1-2/+5
Adjust fixed_phy_register() to return struct phy_device *, so that it becomes easy to use fixed PHYs without device tree support: phydev = fixed_phy_register(PHY_POLL, &fixed_phy_status, NULL); fixed_phy_set_link_update(phydev, fixed_phy_link_update); phy_connect_direct(netdev, phydev, handler_fn, phy_interface); This change is a prerequisite for modifying bcmgenet driver to work without a device tree on Broadcom's MIPS-based 7xxx platforms. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-20of: mdio: honor flags passed to of_phy_connectFlorian Fainelli1-0/+2
Commit f9a8f83b04e0 ("net: phy: remove flags argument from phy_{attach, connect, connect_direct}") removed the flags argument to the PHY library calls to: phy_{attach,connect,connect_direct}. Most Device Tree aware drivers call of_phy_connect() with the flag argument set to 0, but some of them might want to set a different value there in order for the PHY driver to key a specific behavior based on the phy_device::phy_flags value. Allow such drivers to set custom phy_flags as part of the of_phy_connect() call since of_phy_connect() does start the PHY state machine, it will call into the PHY driver config_init() callback which is usually where a specific phy_flags value is important. Fixes: f9a8f83b04e0 ("net: phy: remove flags argument from phy_{attach, connect, connect_direct}") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02net: fix circular dependency in of_mdio codeDaniel Mack1-34/+0
Commit 86f6cf4127 (net: of_mdio: add of_mdiobus_link_phydev()) introduced a circular dependency between libphy and of_mdio. depmod: ERROR: <modroot>/kernel/drivers/net/phy/libphy.ko in dependency cycle! depmod: ERROR: <modroot>/kernel/drivers/of/of_mdio.ko in dependency cycle! The problem is that of_mdio.c references &mdio_bus_type and libphy now references of_mdiobus_link_phydev. Fix this by not exporting of_mdiobus_link_phydev() from of_mdio.ko. Make it a static function in mdio_bus.c instead. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Jeff Mahoney <jeffm@suse.com> Fixes: 86f6cf4127 (net: of_mdio: add of_mdiobus_link_phydev()) Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23of: mdio: fixup of_phy_register_fixed_link parsing of new bindingsRichard Retanubun1-3/+5
Fixes commit 3be2a49e5c08 ("of: provide a binding for fixed link PHYs") Fix the parsing of the new fixed link dts bindings for duplex, pause, and asym_pause by using the correct device node pointer. Signed-off-by: Richard Retanubun <rretanubun.work@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02of: of_mdio: export symbol of_mdiobus_link_phydevDaniel Mack1-0/+1
Make of_mdiobus_link_phydev externally available. This fixes CONFIG_OF_MDIO=m. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 86f6cf41272 ("net: of_mdio: add of_mdiobus_link_phydev()") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02net: of_mdio: use int type for address variableDaniel Mack1-2/+1
Use int rather than u32 to fix the following warning: drivers/of/of_mdio.c:147 of_mdiobus_register() warn: unsigned 'addr' is never less than zero. Signed-off-by: Daniel Mack <zonque@gmail.com> Fixes: 8f8382888cba ("net: of_mdio: factor out code to parse a phy's 'reg' property") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30net: of_mdio: don't store the length of a property if we don't need toDaniel Mack1-2/+2
of_get_property() can be called with NULL as 2nd argument if the caller is not interested in the length of a property. Use that here so we can get rid of a variable. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30net: of_mdio: add of_mdiobus_link_phydev()Daniel Mack1-0/+33
Add a function to walk the list of subnodes of a mdio bus and look for a node that matches the phy's address with its 'reg' property. If found, set the of_node pointer for the phy. This allows auto-probed pyh devices to be augmented by information passed in via DT. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30net: of_mdio: factor out code to parse a phy's 'reg' propertyDaniel Mack1-12/+23
Factor out some logic into of_mdio_parse_addr() so it can be reused later. While at it, use of_property_read_u32() rather than open-coding the same logic again. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-26of: mdio: fix compile warning in of_mdiobus_register_phy()Christian Engelmayer1-1/+0
Commit de906af1 (net: phy: make of_set_phy_supported work with genphy driver) removed the last user of variable 'max_speed' in function of_mdiobus_register_phy(), leading to compile warning "unused variable ‘max_speed’ [-Wunused-variable]". Thus remove it. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22net: phy: make of_set_phy_supported work with genphy driverSascha Hauer1-26/+0
of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. of_set_phy_supported is called right after phy_device_register in the assumption that phy_probe is called from phy_device_register and the features of the phy are already initialized. For the genphy driver this is not true, here phy_probe is called later during phy_connect time. phy_probe will then overwrite all settings done from of_set_phy_supported Fix this by moving of_set_phy_supported to the core phy code and calling it from phy_probe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22of: mdio: remove of_phy_connect_fixed_linkFlorian Fainelli1-38/+0
All in-tree drivers have been converted to use the new pair of functions: of_is_fixed_phy_link() plus of_phy_register_fixed_link(), we can now safely remove of_phy_connect_fixed_link. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17of: provide a binding for fixed link PHYsThomas Petazzoni1-0/+67
Some Ethernet MACs have a "fixed link", and are not connected to a normal MDIO-managed PHY device. For those situations, a Device Tree binding allows to describe a "fixed link" using a special PHY node. This patch adds: * A documentation for the fixed PHY Device Tree binding. * An of_phy_is_fixed_link() function that an Ethernet driver can call on its PHY phandle to find out whether it's a fixed link PHY or not. It should typically be used to know if of_phy_register_fixed_link() should be called. * An of_phy_register_fixed_link() function that instantiates the fixed PHY into the PHY subsystem, so that when the driver calls of_phy_connect(), the PHY device associated to the OF node will be found. These two additional functions also support the old fixed-link Device Tree binding used on PowerPC platforms, so that ultimately, the network device drivers for those platforms could be converted to use of_phy_is_fixed_link() and of_phy_register_fixed_link() instead of of_phy_connect_fixed_link(), while keeping compatibility with their respective Device Tree bindings. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-21of_mdio: Allow the DT to specify the phy ID and avoid autoprobingJason Gunthorpe1-1/+22
This makes the generic of_mdiobus_register parse the DT compatible string for the pattern ethernet-phy-idAAAA.BBBB. If present it should be a value that matches the phy-id register normally readable through MDIO. When the ID is given the phy autoprobing is defeated and the phy is created directly. This is necessary to support phy's that cannot be autoprobed when of_mdiobus_register is called. Specifically, my case has the phy in reset at of_mdiobus_register, the reset is only released once the ethernet driver starts, before it attaches to the phy. Tested on ARM Kirkwood with phy id 0x01410e90 (Marvell 88E1318) Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19of_mdio: fix phy interrupt passingBen Dooks1-7/+9
The of_mdiobus_register_phy() is not setting phy->irq thus causing some drivers to incorrectly assume that the PHY does not have an IRQ associated with it. Not only do some drivers report no IRQ they do not install an interrupt handler for the PHY. Simplify the code setting irq and set the phy->irq at the same time so that we cover the following issues, which should cover all the cases the code will find: - Set phy->irq if node has irq property and mdio->irq is NULL - Set phy->irq if node has no irq and mdio->irq is not NULL - Leave phy->irq as PHY_POLL default if none of the above This fixes the issue: net eth0: attached PHY 1 (IRQ -1) to driver Micrel KSZ8041RNLI to the correct: net eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-15net: of_mdio: fix of_set_phy_supported after driver probingFlorian Fainelli1-1/+5
Commit 8fdade4 ("net: of_mdio: parse "max-speed" property to set PHY supported features") introduced a typo in of_set_phy_supported for the first assignment of phydev->supported which will not effectively limit the PHY device supported features bits if the PHY driver contains "higher" features (e.g: max-speed = <100> and PHY driver has PHY_GBIT_FEATURES set). Fix this by making sure that the very first thing is to reset to sane defaults (PHY_BASIC_FEATURES) and then progressively add speed features as we parse them. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14phylib: Add of_phy_attachAndy Fleming1-0/+20
10G PHYs don't currently support running the state machine, which is implicitly setup via of_phy_connect(). Therefore, it is necessary to implement an OF version of phy_attach(), which does everything except start the state machine. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net: of_mdio: parse "max-speed" property to set PHY supported featuresFlorian Fainelli1-1/+24
The "max-speed" property is defined per the ePAPR specification to express the maximum speed a PHY supports. Use that property, if present to set the phydev->supported features which properly restricts the PHY within the range of defined speeds. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net: of_mdio: do not overwrite PHY interrupt configurationFlorian Fainelli1-2/+3
If irq_of_parse_and_map fails to find an interrupt line for a given PHY, we will force the PHY interrupt to be PHY_POLL, completely overriding the previous value that the MDIO bus may have set for us (e.g: PHY_IGNORE_INTERRUPT). In case of failure, just restore the previous value. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net: of_mdio: use PHY_MAX_ADDR constantFlorian Fainelli1-1/+1
Use the PHY_MAX_ADDR constant for checking if a MDIO bus address is valid instead of using a plain "32". Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net: of_mdio: factor PHY registration from of_mdiobus_registerFlorian Fainelli1-63/+46
Since commit 779d835e ("net: of_mdio: scan mdiobus for PHYs without reg property") we have two foreach loops which do pretty much the same thing. Factor the PHY device registration in a function helper: of_mdiobus_register_phy() which takes care of the details and allows for future PHY specific extensions. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 05:27:06 +0300