summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2009-03-27net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.Thierry Reding3-0/+1121
This patch adds a platform device driver that supports the OpenCores 10/100 Mbps Ethernet MAC. The driver expects three resources: one IORESOURCE_MEM resource defines the memory region for the core's memory-mapped registers while a second IORESOURCE_MEM resource defines the network packet buffer space. The third resource, of type IORESOURCE_IRQ, associates an interrupt with the driver. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds1-2/+2
* 'bkl-removal' of git://git.lwn.net/linux-2.6: Rationalize fasync return values Move FASYNC bit handling to f_op->fasync() Use f_lock to protect f_flags Rename struct file->f_ep_lock
2009-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds631-78304/+87218
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits) ixgbe: Allow Priority Flow Control settings to survive a device reset net: core: remove unneeded include in net/core/utils.c. e1000e: update version number e1000e: fix close interrupt race e1000e: fix loss of multicast packets e1000e: commonize tx cleanup routine to match e1000 & igb netfilter: fix nf_logger name in ebt_ulog. netfilter: fix warning in ebt_ulog init function. netfilter: fix warning about invalid const usage e1000: fix close race with interrupt e1000: cleanup clean_tx_irq routine so that it completely cleans ring e1000: fix tx hang detect logic and address dma mapping issues bridge: bad error handling when adding invalid ether address bonding: select current active slave when enslaving device for mode tlb and alb gianfar: reallocate skb when headroom is not enough for fcb Bump release date to 25Mar2009 and version to 0.22 r6040: Fix second PHY address qeth: fix wait_event_timeout handling qeth: check for completion of a running recovery qeth: unregister MAC addresses during recovery. ... Manually fixed up conflicts in: drivers/infiniband/hw/cxgb3/cxio_hal.h drivers/infiniband/hw/nes/nes_nic.c
2009-03-27Merge branch 'for-linus' of ↵Linus Torvalds7-57/+279
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (30 commits) RDMA/cxgb3: Enforce required firmware IB/mlx4: Unregister IB device prior to CLOSE PORT command mlx4_core: Add link type autosensing mlx4_core: Don't perform SET_PORT command for Ethernet ports RDMA/nes: Handle MPA Reject message properly RDMA/nes: Improve use of PBLs RDMA/nes: Remove LLTX RDMA/nes: Inform hardware that asynchronous event has been handled RDMA/nes: Fix tmp_addr compilation warning RDMA/nes: Report correct vendor_id and vendor_part_id RDMA/nes: Update copyright to new legal entity and year RDMA/nes: Account for freed PBL after HW operation IB: Remove useless ibdev_is_alive() tests from sysfs code IB/sa_query: Fix AH leak due to update_sm_ah() race IB/mad: Fix ib_post_send_mad() returning 0 with no generate send comp IB/mad: initialize mad_agent_priv before putting on lists IB/mad: Fix null pointer dereference in local_completions() IB/mad: Fix RMPP header RRespTime manipulation IB/iser: Remove hard setting of path MTU mlx4_core: Add device IDs for MT25458 10GigE devices ...
2009-03-27Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2-14/+14
Conflicts: drivers/net/wimax/i2400m/usb-notif.c
2009-03-26Merge branch 'master' of ↵David S. Miller2-0/+32
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-03-26ixgbe: Allow Priority Flow Control settings to survive a device resetPJ Waskiewicz5-6/+26
When changing DCB parameters, ixgbe needs to have the MAC reset. The way the flow control code is setup today, PFC will be disabled on a reset. This patch adds a new flow control type for PFC, and then has the netlink layer take care of toggling which type of flow control to enable. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000e: update version numberJesse Brandeburg1-1/+1
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000e: fix close interrupt raceJesse Brandeburg1-6/+10
As noticed by Alan Cox, it is possible for e1000e to exit its interrupt handler or NAPI with interrupts enabled even when the driver is unloading or being configured administratively down. fix related to fix for: http://bugzilla.kernel.org/show_bug.cgi?id=12876 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000e: fix loss of multicast packetsJesse Brandeburg1-44/+18
e1000e (and e1000, igb, ixgbe, ixgb) all do a series of operations each time a multicast address is added. The flow goes something like 1) stack adds one multicast address 2) stack passes whole current list of unicast and multicast addresses to driver 3) driver clears entire list in hardware 4) driver programs each multicast address using iomem in a loop This was causing multicast packets to be lost during the reprogramming process. reference with test program: http://kerneltrap.org/mailarchive/linux-netdev/2009/3/14/5160514/thread Thanks to Dave Boutcher for his report and test program. This driver fix prepares an array all at once in memory and programs it in one shot to the hardware, not requiring an "erase" cycle. It would still be possible for packets to be dropped while the receiver is off during reprogramming. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Dave Boutcher <daveboutcher@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000e: commonize tx cleanup routine to match e1000 & igbAlexander Duyck1-11/+8
This change updates the e1000e tx cleanup routine to more closely match what already exists in igb and e1000. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000: fix close race with interruptJesse Brandeburg1-4/+24
this is in regards to http://bugzilla.kernel.org/show_bug.cgi?id=12876 where it appears that e1000 can leave its interrupt enabled after exiting the driver. Fix the bug by making the interrupt enable paths more aware of the driver exiting. Thanks to Alan Cox for the poke and initial investigation. CC: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000: cleanup clean_tx_irq routine so that it completely cleans ringAlexander Duyck1-12/+9
The tx cleanup routine was stopping after 64 packets and this was causing issues resulting in the ring not being completely cleaned. This change updates the driver to clean the entire ring and if it doesn't it then will retry on the next pass. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000: fix tx hang detect logic and address dma mapping issuesAlexander Duyck1-25/+30
This patch changes the dma mapping to better support skb_dma_map/skb_dma_unmap and addresses and redefines the tx hang logic to be based off of time stamp instead of if the dma field is populated Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26bonding: select current active slave when enslaving device for mode tlb and albJiri Pirko1-0/+1
I've hit an issue on my system when I've been using RealTek RTL8139D cards in bonding interface in mode balancing-alb. When I enslave a card, the current active slave (bond->curr_active_slave) is not set and the link is therefore not functional. ---- # cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008) Bonding Mode: adaptive load balancing Primary Slave: None Currently Active Slave: None MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:1f:1f:01:2f:22 ---- The thing that gets it right is when I unplug the cable and then I put it back into the NIC. Then the current active slave is set to eth1 and link is working just fine. Here is dmesg log with bonding DEBUG messages turned on: ---- ADDRCONF(NETDEV_UP): bond0: link is not ready event_dev: bond0, event: 1 IFF_MASTER event_dev: bond0, event: 8 IFF_MASTER bond_ioctl: master=bond0, cmd=35216 slave_dev=cac5d800: slave_dev->name=eth1: eth1: ! NETIF_F_VLAN_CHALLENGED event_dev: eth1, event: 8 eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1 event_dev: eth1, event: 1 event_dev: eth1, event: 8 IFF_SLAVE Initial state of slave_dev is BOND_LINK_UP bonding: bond0: enslaving eth1 as an active interface with an up link. ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready event_dev: bond0, event: 4 IFF_MASTER bond0: no IPv6 routers present <<<<cable unplug>>>> eth1: link down event_dev: eth1, event: 4 IFF_SLAVE bonding: bond0: link status definitely down for interface eth1, disabling it event_dev: bond0, event: 4 IFF_MASTER <<<<cable plug>>>> eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1 event_dev: eth1, event: 4 IFF_SLAVE bonding: bond0: link status definitely up for interface eth1. bonding: bond0: making interface eth1 the new active one. event_dev: eth1, event: 8 IFF_SLAVE event_dev: eth1, event: 8 IFF_SLAVE bonding: bond0: first active interface up! event_dev: bond0, event: 4 IFF_MASTER ---- The current active slave is set by calling bond_select_active_slave() function from bond_miimon_commit() function when the slave (eth1) link goes to state up. I also tested this on other machine with Broadcom NetXtreme II BCM5708 1000Base-T NIC and there all works fine. The thing is that this adapter is down and goes up after few seconds after it is enslaved. This patch calls bond_select_active_slave() in bond_enslave() function for modes alb and tlb and makes sure that the current active slave is set up properly even when the slave state is already up. Tested on both systems, works fine. Notice: The same problem can maybe also occrur in mode 8023AD but I'm unable to test that. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26gianfar: reallocate skb when headroom is not enough for fcbLi Yang1-10/+21
Gianfar uses a hardware header FCB for offloading. However when used with bridging or IP forwarding, TX skb might not have enough headroom for the FCB. Reallocate skb for such cases. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26Bump release date to 25Mar2009 and version to 0.22Florian Fainelli1-2/+2
This patch bumps the driver release date to March 25th 2009 and release version to 0.22. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26r6040: Fix second PHY addressFlorian Fainelli1-1/+1
This patch fixes the second PHY address which is strapped to be at PHY address 3 instead of 2. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25rndis_wlan: Fix build with netdev_ops compat disabled.David S. Miller1-1/+13
Instead of storing a private ->set_multicast_list, just have a private netdev ops. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25ax88796: Add method to take MAC from platform dataDaniel Mack1-5/+12
Implement a way to provide the MAC address for ax88796 devices from their platform data. Boards might decide to set the address programmatically, taken from boot tags or other sources. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25drivers/net/ax88796.c: take IRQ flags from platform_deviceDaniel Mack1-5/+9
This patch adds support to the ax88796 ethernet driver to take IRQ flags given by the platform_device definition. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25e1000e: add support for 82574 device ID 0x10F6Bruce Allan2-0/+2
Add device ID for a new variant of the 82574 adapter. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Acked-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25be2net: cleanup rx/tx rate calculationsSathya Perla2-36/+72
Hi, Pls accept this patch to cleanup rx/tx rate calculations as follows: - check for jiffies wraparound - remove typecast of a denominator - do rate calculation only in workqueue context periodically Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25platform driver: fix incorrect use of 'platform_bus_type' with 'struct ↵Ming Lei1-12/+14
device_driver' This patch fixes the bug reported in http://bugzilla.kernel.org/show_bug.cgi?id=11681. "Lots of device drivers register a 'struct device_driver' with the '.bus' member set to '&platform_bus_type'. This is wrong, since the platform_bus functions expect the 'struct device_driver' to be wrapped up in a 'struct platform_driver' which provides some additional callbacks (like suspend_late, resume_early). The effect may be that platform_suspend_late() uses bogus data outside the device_driver struct as a pointer pointer to the device driver's suspend_late() function or other hard to reproduce failures."(Lothar Wassmann) Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-25wimax: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2-2/+2
Cc: inaky.perez-gonzalez@intel.com Cc: linux-wimax@intel.com Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-25net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers19-50/+54
Cc: davem@davemloft.net Cc: netdev@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-25myri10ge: update firmware headers to 1.4.41Brice Goglin1-0/+9
Update myri10ge firmware headers to firmware version 1.4.41. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25macb: fix warning "warning: unused variable `dev' "vibi sreenivasan1-1/+0
Removed unused variable dev Signed-off-by: vibi sreenivasan <vibi_sreenivasan@cms.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25ucc_geth: Convert to net_device_opsJoakim Tjernlund1-9/+15
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24dnet: drivers/net/dnet.c needs <linux/io.h>Geert Uytterhoeven1-0/+1
On m68k: | drivers/net/dnet.c: In function 'dnet_readw_mac': | drivers/net/dnet.c:36: error: implicit declaration of function 'writel' | drivers/net/dnet.c:43: error: implicit declaration of function 'readl' | drivers/net/dnet.c: In function 'dnet_probe': | drivers/net/dnet.c:873: error: implicit declaration of function 'ioremap' | drivers/net/dnet.c:873: warning: assignment makes pointer from integer without a cast | drivers/net/dnet.c:939: error: implicit declaration of function 'iounmap' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ucc_geth: Fix build breakage caused by a mergeAnton Vorontsov1-1/+1
This patch fixes following build error: CC ucc_geth.o ucc_geth.c: In function 'ucc_geth_probe': ucc_geth.c:3644: error: implicit declaration of function 'uec_mdio_bus_name' make[2]: *** [ucc_geth.o] Error 1 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ucc_geth: Fix merge error.David S. Miller1-5/+0
I left a merge failure unresolved, noticed by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24fsl_pq_mdio: Use proper address translationAnton Vorontsov1-3/+7
Currently the driver just read "reg" property for constructing MDIO bus IDs, but this won't work when we'll start using "ranges = <>" in the device tree, so this will pop up: Freescale PowerQUICC MII Bus: probed sysfs: duplicate filename 'mdio@520' can not be created ------------[ cut here ]------------ Badness at c00cb6b8 [verbose debug info unavailable] NIP: c00cb6b8 LR: c00cb6b8 CTR: c001271c REGS: cf82fc10 TRAP: 0700 Not tainted (2.6.29-rc7-03702-g7ccd10f) MSR: 00029032 <EE,ME,CE,IR,DR> CR: 42044022 XER: 20000000 TASK = cf81fbd0[1] 'swapper' THREAD: cf82e000 GPR00: c00cb6b8 cf82fcc0 cf81fbd0 0000003b 00000e42 ffffffff 00004000 00000e42 GPR08: c03cb0fc c03bfbdc 00000e42 c03cac50 22044022 1006a2bc 0ffcb000 00000000 GPR16: 0ffc04b0 0ffc5a40 00000000 0ffc79a8 0f7863a8 00000004 00000000 00000000 GPR24: c033a6a8 d1014520 cf85e840 cf82fd08 cf87cf2c cf82fcd8 cf85dea8 ffffffef NIP [c00cb6b8] sysfs_add_one+0x4c/0x54 LR [c00cb6b8] sysfs_add_one+0x4c/0x54 Call Trace: [cf82fcc0] [c00cb6b8] sysfs_add_one+0x4c/0x54 (unreliable) [cf82fcd0] [c00cbc18] create_dir+0x58/0xc0 [cf82fd00] [c00cbcc0] sysfs_create_dir+0x40/0x70 [cf82fd20] [c0159388] create_dir+0x28/0x78 [cf82fd30] [c0159824] kobject_add_internal+0x98/0x13c [cf82fd50] [c0159e98] kobject_add+0x60/0x98 [cf82fd80] [c018a480] device_add+0x98/0x2ac [cf82fda0] [c01a2380] mdiobus_register+0xbc/0x1c0 [cf82fdc0] [c019f31c] fsl_pq_mdio_probe+0x284/0x2a0 [cf82fe00] [c0223814] of_platform_device_probe+0x5c/0x84 ... This patch fixes the issue by translating the "reg" property to a full address, and thus avoids the duplicate names. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24phy: add new LAN8710 and LAN8720 device ids to smsc phy driverSteve Glendinning1-0/+31
LAN8710 and LAN8720 are two new 10/100 ethernet PHY models. The two share the same phy id, this patch adds it to the smsc phy driver. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24spider_net: Add missing .ndo_validate_addrDavid S. Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24myri_sbus/sunbmac/sunlance/sunqe: Add missing net_device_ops entries.David S. Miller4-0/+11
Noticed by Stephen Hemminger. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23Merge branch 'master' of ↵David S. Miller8-62/+61
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ucc_geth.c
2009-03-23sunqe: Convert to net_device_ops.David S. Miller1-5/+9
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23sunlance: Convert to net_device_ops.David S. Miller1-5/+9
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23sunbmac: Convert to net_device_ops.David S. Miller1-9/+10
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23myri_sbus: Convert to net_device_ops.David S. Miller1-6/+10
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds20-100/+202
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) ucc_geth: Fix oops when using fixed-link support dm9000: locking bugfix net: update dnet.c for bus_id removal dnet: DNET should depend on HAS_IOMEM dca: add missing copyright/license headers nl80211: Check that function pointer != NULL before using it sungem: missing net_device_ops be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle be2net: replenish when posting to rx-queue is starved in out of mem conditions bas_gigaset: correctly allocate USB interrupt transfer buffer smsc911x: reset last known duplex and carrier on open sh_eth: Fix mistake of the address of SH7763 sh_eth: Change handling of IRQ netns: oops in ip[6]_frag_reasm incrementing stats net: kfree(napi->skb) => kfree_skb net: fix sctp breakage ipv6: fix display of local and remote sit endpoints net: Document /proc/sys/net/core/netdev_budget tulip: fix crash on iface up with shirq debug virtio_net: Make virtio_net support carrier detection ...
2009-03-23atl1c: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include in drivers/net/atl1c/atl1c.h. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23spider_net: Fix build.David S. Miller1-9/+9
Based upon a report by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23ucc_geth: Fix oops when using fixed-link supportAnton Vorontsov2-26/+11
commit b1c4a9dddf09fe99b8f88252718ac5b357363dc4 ("ucc_geth: Change uec phy id to the same format as gianfar's") introduced a regression in the ucc_geth driver that causes this oops when fixed-link is used: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0151270 Oops: Kernel access of bad area, sig: 11 [#1] TMCUTU NIP: c0151270 LR: c0151270 CTR: c0017760 REGS: cf81fa60 TRAP: 0300 Not tainted (2.6.29-rc8) MSR: 00009032 <EE,ME,IR,DR> CR: 24024042 XER: 20000000 DAR: 00000000, DSISR: 20000000 TASK = cf81cba0[1] 'swapper' THREAD: cf81e000 GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80 cf86b08c GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000 0ffc81a0 GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c cf83f000 GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80 cf83f360 NIP [c0151270] ucc_geth_open+0x330/0x1efc LR [c0151270] ucc_geth_open+0x330/0x1efc Call Trace: [cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable) [cf81fba0] [c0187638] dev_open+0xbc/0x12c [cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0 This patch fixes the issue by removing offending (and somewhat duplicate) code from init_phy() routine, and changes _probe() function to use uec_mdio_bus_name(). Also, since we fully construct phy_bus_id in the _probe() routine, we no longer need ->phy_address and ->mdio_bus fields in ucc_geth_info structure. I wish the patch would be a bit shorter, but it seems like the only way to fix the issue in a sane way. Luckily, the patch has been tested with real PHYs and fixed-link, so no further regressions expected. Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23dm9000: locking bugfixDavid Brownell1-2/+4
This fixes a locking bug in the dm9000 driver. It calls request_irq() without setting IRQF_DISABLED ... which is correct for handlers that support IRQ sharing, since that behavior is not guaranteed for shared IRQs. However, its IRQ handler then wrongly assumes that IRQs are blocked. So the fix just uses the right spinlock primitives in the IRQ handler. NOTE: this is a classic example of the type of bug which lockdep currently masks by forcibly setting IRQF_DISABLED on IRQ handlers that did not request that flag. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23bnx2x: Adding licensing to bnx2x_init_values.hEilon Greenstein1-1/+17
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23net: update dnet.c for bus_id removalStephen Rothwell1-3/+3
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-22netdev: expose net_device_ops compat as config optionStephen Hemminger1-0/+9
Now that most network device drivers in (all but one in x86_64 allmodconfig) support net_device_ops. Expose it as a configuration parameter. Still need to address even older 32 bit drivers, and other arch before compatiablity can be scheduled for removal in some future release. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-22hostap: convert to net_device_opsStephen Hemminger2-18/+52
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 01:39:06 +0300