summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2017-02-21net: ethernet: aquantia: Using NETDEV_TX_OK instead 0.Pavel Belous1-1/+1
Use NETDEV_TX_OK as the return value for successful transmission. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: ethernet: aquantia: Fixed missing rtnl_unlock.Pavel Belous1-2/+3
rtnl_unlock should be called if error occurred. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: ethernet: aquantia: Superfluous initialization of "err".Pavel Belous1-7/+1
Fixed superfluous initialization of err. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: ethernet: aquantia: Using module_pci_driver.Pavel Belous1-19/+1
Remove boilerplate code by using macro module_pci_driver. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: ethernet: aquantia: Fixes for aq_ndev_change_mtuPavel Belous2-11/+2
1)Removed unnecessary comparsion "old_mtu == new_mtu". This check is not needed. Function aq_ndev_change_mtu wont be called if mtu has not changed. 2)Removed extra assignment ndev->mtu = new_mtu; This assignment already done inside __dev_set_mtu(). 3)Use core MTU checking for min_mtu. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: ethernet: aquantia: Removed busy_count field.Pavel Belous2-12/+0
busy_count field and is_busy flag is not needed at all. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: ethernet: aquantia: Removed extra assignment for skb->dev.Pavel Belous1-1/+0
This assignment is not needed. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: qlogic: qlge: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-15/+21
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: qlogic: qlcnic: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes3-109/+123
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: allow application firmware to limit number of SR-IOV VFsJakub Kicinski2-0/+27
Some application firmware projects may choose to limit the number of VFs available below what is specified in PCI capability to be able to reuse the PCIe interface resources. There may also be projects which use cases don't require SR-IOV support at all and therefore don't want to spend time implementing/testing it. Check nfd_vf_cfg_max_vfs firmware symbol to see if application firmware is reporting how many VFs it supports. This mechanism is an opt-in, if symbol is not present we will only look at the PCI capability values. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: return nfp_rtsym_read_le() errors correctlyJakub Kicinski1-3/+5
nfp_rtsym_read_le() has an out parameter for error codes. We have to use that instead of returning errors directly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: add very basic access to NSP logsJakub Kicinski3-0/+79
Allow dumping "arm.diag" resource with ethtool -w. This resource should contain a text log of the NSP (control processor) application. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: report NSP ABI version in ethtool FW versionJakub Kicinski5-2/+41
ethtool_drvinfo->fw_version can cantain multiple FW strings. We already report NFD ABI version there, add NSP ABI version if available (i.e. on PF) with 'sp:' prefix. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: store NSP ABI version in state structureJakub Kicinski1-14/+13
We read the status register on each NSP open, we can store the NSP ABI version in the state structure so that we don't have to read it again. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: report manufacturing info on loadJakub Kicinski1-0/+7
Report card manufacturing information when driver loads. These identify the version of the board and its subcomponents. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: refactor NSP initialization and add error messageJakub Kicinski1-23/+36
When acquiring NSP communication resource fails user is left with "probe failed with error -2" PCI code message but no info on what caused the problem. Some development boards may not have NSP FW in the flash image. Help users with a more verbouse message. While at it move the whole NSP init to a separate function to keep .probe() callback nice and simple. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qlcnic: Fix a memory leak in error handling pathChristophe Jaillet1-2/+4
If 'dma_alloc_coherent()' fails, we should release resources allocated so far, just as done in all other cases in this function. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: mvpp2: Fix a memory leak in error handling pathChristophe Jaillet1-2/+4
if 'devm_kzalloc()' fails, we should release resources allocated so far, just as done a few lines below. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20mlx4: reduce OOM risk on arches with large pagesEric Dumazet1-1/+2
Since mlx4 NIC are used on PowerPC with 64K pages, we need to adapt MLX4_EN_ALLOC_PREFER_ORDER definition. Otherwise, a fragment sitting in an out of order TCP queue can hold 0.5 Mbytes and it is a serious OOM risk. Fixes: 51151a16a60f ("mlx4: allow order-0 memory allocations in RX path") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20Merge branch '40GbE' of ↵David S. Miller9-57/+147
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-02-18 This series contains updates to i40e and i40evf only. Alan fixes a bug in which the driver is unable to exit overflow promiscuous mode after having added "too many" mac filters. Ractored the '%*ph' printk format specifier to instead use the print_hex_dump(). Josh adds enabling multicast magic packet wakeup by adding calls to the mac_address_write admin q function during power down to update the PRTPM_SAH/SAL registers with the MC_MAG_EN bit. Jake remove a duplicate call i40e_update_link_info(), since it does not need to call it twice. Fixes and issue where we calculating the wrong switch id on big endian platforms. Avoided sparse warning, by doing a typecast to ensure the value is of the type expected by csum_replace_by_diff(). Mitch fixes a memory leak by freeing resources during i40e_remove(). Cleans up some code confusion by adding a proper code comment. Carolyn fixes a bug introduced with the addition of the per queue ITR feature support in ethtool. Cleans up a duplicate device id from the PCI table. Harshitha fixes a bug which causes the 'Link Detected' field in ethtool to report the correct link status. Benjamin Poirier from SuSE applies a fix ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule") to i40e driver as well. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: qlogic: qla3xxx: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-11/+18
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20fsl/fman: fix spelling mistake in variable name en_tsu_err_exeptionColin Ian King1-4/+4
trivial fix to spelling mistake, en_tsu_err_exeption should be en_tsu_err_exception Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: aquantia: remove function aq_ring_tx_deinitLino Sanfilippo3-39/+11
Both functions aq_ring_rx_deinit() and aq_ring_tx_clean() are almost identical aside from an additional check in the latter. Move that check from the function into its caller and replace aq_ring_rx_deinit() with aq_ring_rx_deinit(). By doing this also adjust the functions return value from int to void since it can never fail. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Tested-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ena: remove superfluous check in ena_remove()Lino Sanfilippo1-6/+0
The check in ena_remove() for the pci driver data not being NULL is not needed, since it is always set in the probe() function. Remove the superfluous check. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: phy: Check phydev->drvFlorian Fainelli2-7/+25
There are number of function calls, originating from user-space, typically through the Ethernet driver that can make us crash by dereferencing phydev->drv which will be NULL once we unbind the driver from the PHY. There are still functional issues that prevent an unbind then rebind to work, but these will be addressed separately. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: phy: Fix PHY unbind crashFlorian Fainelli1-0/+2
The PHY library does not deal very well with bind and unbind events. The first thing we would see is that we were not properly canceling the PHY state machine workqueue, so we would be crashing while dereferencing phydev->drv since there is no driver attached anymore. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: ethernet: stmmac: dwmac-rk: Add RK3328 gmac supportdavid.wu1-0/+117
Add constants and callback functions for the dwmac on rk3328 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: david.wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20virtio-net: batch stats updatingJason Wang1-16/+31
We already have counters for sent/recv packets and sent/recv bytes. Doing a batched update to reduce the number of u64_stats_update_begin/end(). Take care not to bother with stats update when called speculatively. Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20mlx4: fix potential divide by 0 in mlx4_en_auto_moderation()Eric Dumazet1-10/+14
1) In the case where rate == priv->pkt_rate_low == priv->pkt_rate_high, mlx4_en_auto_moderation() does a divide by zero. 2) We want to properly change the moderation parameters if rx_frames was changed (like in ethtool -C eth0 rx-frames 16) Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqsThomas Falcon2-2/+15
After sending device capability queries and requests to the vNIC Server, an interrupt is triggered and the responses are written to the driver's CRQ response buffer. Since the interrupt can be triggered before all responses are written and visible to the partition, there is a danger that the interrupt handler or tasklet can terminate before all responses are read, resulting in a failure to initialize the device. To avoid this scenario, when capability commands are sent, we set a flag that will be checked in the following interrupt tasklet that will handle the capability responses from the server. Once all responses have been handled, the flag is disabled; and the tasklet is allowed to terminate. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20ibmvnic: Use common counter for capabilities checksThomas Falcon2-35/+39
Two different counters were being used for capabilities requests and queries. These commands are not called at the same time so there is no reason a single counter cannot be used. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20ibmvnic: Handle processing of CRQ messages in a taskletThomas Falcon2-1/+18
Create a tasklet to process queued commands or messages received from firmware instead of processing them in the interrupt handler. Note that this handler does not process network traffic, but communications related to resource allocation and device settings. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed: Add support for hardware offloaded FCoE.Arun Easi21-16/+2303
This adds the backbone required for the various HW initalizations which are necessary for the FCoE driver (qedf) for QLogic FastLinQ 4xxxx line of adapters - FW notification, resource initializations, etc. Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-3/+5
2017-02-19i40e: Invoke softirqs after napi_rescheduleBenjamin Poirier1-0/+2
The following message is logged from time to time when using i40e: NOHZ: local_softirq_pending 08 i40e may schedule napi from a workqueue. Afterwards, softirqs are not run in a deterministic time frame. The problem is the same as what was described in commit ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule") and this patch applies the same fix to i40e. Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40e: remove duplicate device id from PCI tableCarolyn Wyborny1-1/+0
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40e: mark the value passed to csum_replace_by_diff as __wsumJacob Keller2-4/+6
Fix, or rather, avoid a sparse warning caused by the fact that csum_replace_by_diff expects to receive a __wsum value. Since the calculation appears to work, simply typecast the passed paylen value to __wsum to avoid the warning. This seems pretty fishy since __wsum was obviously annotated as a separate type on purpose, so this throws the entire calculation into question. Since it currently appears to behave as expected, the typecast is probably safe. Change-ID: I4fdc5cddd589abc16098176e8a61127e761488f4 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40e: Error handling for link eventHarshitha Ramamurthy2-2/+13
There exists an intermittent bug which causes the 'Link Detected' field reported by the 'ethtool <iface>' command to be 'Yes' when in fact, there is no link. This patch fixes the problem by enabling temporary link polling when i40e_get_link_status returns an error. This causes the driver to remember that an admin queue command failed and polls, until the function returns with a success. Change-Id: I64c69b008db4017b8729f3fc27b8f65c8fe2eaa0 Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40e: properly convert le16 value to CPU formatJacob Keller1-5/+6
This ensures that the pvid which is stored in __le16 format is converted to the CPU format. This will fix comparison issues on Big Endian platforms. Change-ID: I92c80d1315dc2a0f9f095d5a0c48d461beb052ed Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40e: convert to cpu from le16 to generate switch_id correctlyJacob Keller1-2/+3
On Big Endian platforms we would incorrectly calculate the wrong switch id since we did not properly convert the le16 value into CPU format. Caught by sparse. Change-ID: I69a2f9fa064a0a91691f7d0e6fcc206adceb8e36 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40e: refactor AQ CMD buffer debug printingAlan Brady2-14/+24
This patch refactors the '%*ph' printk format specifier to instead use the print_hex_dump function, as recommended by the '%*ph' documentation. This produces better/more standardized output. Change-ID: Id56700b4e8abc40ff8c04bc8379e7df04cb4d6fd Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40e: Fix Adaptive ITR enablingCarolyn Wyborny2-12/+12
This patch fixes a bug introduced with the addition of the per queue ITR feature support in ethtool. With that addition, there were functions added which converted the ITR settings to binary values. The IS_ENABLED macros that run on those values check whether a bit is set or not and with the value being binary, the bit check always returned ITR disabled which prevents any updating of the ITR rate. This patch fixes the problem by changing the functions to return the current ITR value instead and renaming it to better reflect its function. These functions now provide a value which will be accurately asessed and update the ITR as intended. Change-ID: I14f1d088d052e27f652aaa3113e186415ddea1fc Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40evf: add commentMitch Williams1-0/+5
Add a comment to reduce confusion. Change-ID: I3d5819c0f3f5174680442ae54398a073d4a61f4f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40evf: free rings in remove functionMitch Williams1-1/+2
When the i40evf_remove() calls netdev close, the device doesn't actually close - it schedules the work for the watchdog to perform. Since we're stopping the watchdog, this work doesn't get done. However, we're resetting the part, so we can free resources after the reset request has gone through. This plugs a memory leak. Change-ID: Id5335dcaf76ce00d2a4c3d26e9faf711d7f051cf Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40e: remove unnecessary call to i40e_update_link_infoJacob Keller1-1/+0
This call is made just prior to running i40e_link_event. In i40e_link_event, we set hw->phy.get_link_info to true just prior to calling i40e_get_link_status, which conveniently runs i40e_update_link_info for us. Thus, we are running i40e_update_link_info twice, which seems like something we don't need to do... Change-ID: I36467a570f44b7546d218c99e134ff97c2709315 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40e: enable mc magic pkt wakeup during power downJoshua Hay3-10/+67
This patch adds a call to the mac_address_write admin q function during power down to update the PRTPM_SAH/SAL registers with the MC_MAG_EN bit thus enabling multicast magic packet wakeup. A FW workaround is needed to write the multicast magic wake up enable bit in the PRTPM_SAH register. The FW expects the mac address write admin q cmd to be called first with one of the WRITE_TYPE_LAA flags and then with the multicast relevant flags. *Note: This solution only works for X722 devices currently. A PFR will clear the previously mentioned bit by default, but X722 has support for a WOL_PRESERVE_ON_PFR flag which prevents the bit from being cleared. Once other devices support this flag, this solution should work as well. Change-ID: I51bd5b8535bd9051c2676e27c999c1657f786827 Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-19i40e: fix disable overflow promiscuous modeAlan Brady1-5/+7
There exists a bug in which the driver is unable to exit overflow promiscuous mode after having added "too many" mac filters. It is expected that after triggering overflow promiscuous, removing the failed/extra filters should then disable overflow promiscuous mode. The bug exists because we were intentionally skipping the sync_vsi_filter path in cases where we were removing failed filters since they shouldn't have been added to the firmware in the first place, however we still need to go through the sync_vsi_filter code path to determine whether or not it is ok to exit overflow promiscuous mode. This patch fixes the bug by making sure we go through the sync_vsi_filter path in cases of failed filters. Change-ID: I634d249ca3e5fa50729553137c295e73e7722143 Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-17vxlan: fix oops in dev_fill_metadata_dstPaolo Abeni1-2/+4
Since the commit 0c1d70af924b ("net: use dst_cache for vxlan device") vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL dst_cache pointer, so the latter should explicitly check for valid dst_cache ptr. Unfortunately the commit d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel") removed said check. As a result is possible to trigger a null pointer access calling vxlan_fill_metadata_dst(), e.g. with: ovs-vsctl add-br ovs-br0 ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \ type=vxlan options:remote_ip=192.168.1.1 \ options:key=1234 options:dst_port=4789 ofport_request=10 ip address add dev ovs-br0 172.16.1.2/24 ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \ targets=\"172.16.1.1:1234\" sampling=1 iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234 This commit addresses the issue passing to vxlan_get_route() the dst_cache already available into the lwt info processed by vxlan_fill_metadata_dst(). Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17sfc: do not device_attach if a reset is pendingPeter Dunning5-11/+19
efx_start_all can return without initialising queues as a reset is pending. This means that when netif_device_attach is called, the kernel can start sending traffic without having an initialised TX queue to send to. This patch avoids this by not calling netif_device_attach if there is a pending reset. Fixes: e283546c0465 ("sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast)") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17sfc: forget filters from sw table if hw replies ENOENT on removing themBert Kenward1-3/+8
If the hw doesn't think they exist, we should defer to its authority. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 04:57:23 +0300