summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-05-31Merge 5.13-rc4 into tty-nextGreg Kroah-Hartman88-523/+1270
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27Merge tag 'net-5.13-rc4' of ↵Linus Torvalds72-395/+1147
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter, can and wireless trees. Notably including fixes for the recently announced "FragAttacks" WiFi vulnerabilities. Rather large batch, touching some core parts of the stack, too, but nothing hair-raising. Current release - regressions: - tipc: make node link identity publish thread safe - dsa: felix: re-enable TAS guard band mode - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid() - stmmac: fix system hang if change mac address after interface ifdown Current release - new code bugs: - mptcp: avoid OOB access in setsockopt() - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers - ethtool: stats: fix a copy-paste error - init correct array size Previous releases - regressions: - sched: fix packet stuck problem for lockless qdisc - net: really orphan skbs tied to closing sk - mlx4: fix EEPROM dump support - bpf: fix alu32 const subreg bound tracking on bitwise operations - bpf: fix mask direction swap upon off reg sign change - bpf, offload: reorder offload callback 'prepare' in verifier - stmmac: Fix MAC WoL not working if PHY does not support WoL - packetmmap: fix only tx timestamp on request - tipc: skb_linearize the head skb when reassembling msgs Previous releases - always broken: - mac80211: address recent "FragAttacks" vulnerabilities - mac80211: do not accept/forward invalid EAPOL frames - mptcp: avoid potential error message floods - bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent out of buffer writes - bpf: forbid trampoline attach for functions with variable arguments - bpf: add deny list of functions to prevent inf recursion of tracing programs - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT - can: isotp: prevent race between isotp_bind() and isotp_setsockopt() - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Misc: - bpf: add kconfig knob for disabling unpriv bpf by default" * tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits) net: phy: Document phydev::dev_flags bits allocation mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer mptcp: avoid error message on infinite mapping mptcp: drop unconditional pr_warn on bad opt mptcp: avoid OOB access in setsockopt() nfp: update maintainer and mailing list addresses net: mvpp2: add buffer header handling in RX bnx2x: Fix missing error code in bnx2x_iov_init_one() net: zero-initialize tc skb extension on allocation net: hns: Fix kernel-doc sctp: fix the proc_handler for sysctl encap_port sctp: add the missing setting for asoc encap_port bpf, selftests: Adjust few selftest result_unpriv outcomes bpf: No need to simulate speculative domain for immediates bpf: Fix mask direction swap upon off reg sign change bpf: Wrap aux data inside bpf_sanitize_info container bpf: Fix BPF_LSM kconfig symbol dependency selftests/bpf: Add test for l3 use of bpf_redirect_peer bpftool: Add sock_release help info for cgroup attach/prog load command net: dsa: microchip: enable phy errata workaround on 9567 ...
2021-05-26net: mvpp2: add buffer header handling in RXStefan Chulski2-9/+67
If Link Partner sends frames larger than RX buffer size, MAC mark it as oversize but still would pass it to the Packet Processor. In this scenario, Packet Processor scatter frame between multiple buffers, but only a single buffer would be returned to the Buffer Manager pool and it would not refill the poll. Patch add handling of oversize error with buffer header handling, so all buffers would be returned to the Buffer Manager pool. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-26bnx2x: Fix missing error code in bnx2x_iov_init_one()Jiapeng Chong1-1/+3
Eliminate the follow smatch warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227 bnx2x_iov_init_one() warn: missing error code 'err'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-26net: zero-initialize tc skb extension on allocationVlad Buslov2-2/+2
Function skb_ext_add() doesn't initialize created skb extension with any value and leaves it up to the user. However, since extension of type TC_SKB_EXT originally contained only single value tc_skb_ext->chain its users used to just assign the chain value without setting whole extension memory to zero first. This assumption changed when TC_SKB_EXT extension was extended with additional fields but not all users were updated to initialize the new fields which leads to use of uninitialized memory afterwards. UBSAN log: [ 778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28 [ 778.301495] load of value 107 is not a valid value for type '_Bool' [ 778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2 [ 778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 778.307901] Call Trace: [ 778.308680] <IRQ> [ 778.309358] dump_stack+0xbb/0x107 [ 778.310307] ubsan_epilogue+0x5/0x40 [ 778.311167] __ubsan_handle_load_invalid_value.cold+0x43/0x48 [ 778.312454] ? memset+0x20/0x40 [ 778.313230] ovs_flow_key_extract.cold+0xf/0x14 [openvswitch] [ 778.314532] ovs_vport_receive+0x19e/0x2e0 [openvswitch] [ 778.315749] ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch] [ 778.317188] ? create_prof_cpu_mask+0x20/0x20 [ 778.318220] ? arch_stack_walk+0x82/0xf0 [ 778.319153] ? secondary_startup_64_no_verify+0xb0/0xbb [ 778.320399] ? stack_trace_save+0x91/0xc0 [ 778.321362] ? stack_trace_consume_entry+0x160/0x160 [ 778.322517] ? lock_release+0x52e/0x760 [ 778.323444] netdev_frame_hook+0x323/0x610 [openvswitch] [ 778.324668] ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch] [ 778.325950] __netif_receive_skb_core+0x771/0x2db0 [ 778.327067] ? lock_downgrade+0x6e0/0x6f0 [ 778.328021] ? lock_acquire+0x565/0x720 [ 778.328940] ? generic_xdp_tx+0x4f0/0x4f0 [ 778.329902] ? inet_gro_receive+0x2a7/0x10a0 [ 778.330914] ? lock_downgrade+0x6f0/0x6f0 [ 778.331867] ? udp4_gro_receive+0x4c4/0x13e0 [ 778.332876] ? lock_release+0x52e/0x760 [ 778.333808] ? dev_gro_receive+0xcc8/0x2380 [ 778.334810] ? lock_downgrade+0x6f0/0x6f0 [ 778.335769] __netif_receive_skb_list_core+0x295/0x820 [ 778.336955] ? process_backlog+0x780/0x780 [ 778.337941] ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core] [ 778.339613] ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0 [ 778.341033] ? kvm_clock_get_cycles+0x14/0x20 [ 778.342072] netif_receive_skb_list_internal+0x5f5/0xcb0 [ 778.343288] ? __kasan_kmalloc+0x7a/0x90 [ 778.344234] ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core] [ 778.345676] ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core] [ 778.347140] ? __netif_receive_skb_list_core+0x820/0x820 [ 778.348351] ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core] [ 778.349688] ? napi_gro_flush+0x26c/0x3c0 [ 778.350641] napi_complete_done+0x188/0x6b0 [ 778.351627] mlx5e_napi_poll+0x373/0x1b80 [mlx5_core] [ 778.352853] __napi_poll+0x9f/0x510 [ 778.353704] ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core] [ 778.355158] net_rx_action+0x34c/0xa40 [ 778.356060] ? napi_threaded_poll+0x3d0/0x3d0 [ 778.357083] ? sched_clock_cpu+0x18/0x190 [ 778.358041] ? __common_interrupt+0x8e/0x1a0 [ 778.359045] __do_softirq+0x1ce/0x984 [ 778.359938] __irq_exit_rcu+0x137/0x1d0 [ 778.360865] irq_exit_rcu+0xa/0x20 [ 778.361708] common_interrupt+0x80/0xa0 [ 778.362640] </IRQ> [ 778.363212] asm_common_interrupt+0x1e/0x40 [ 778.364204] RIP: 0010:native_safe_halt+0xe/0x10 [ 778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00 [ 778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246 [ 778.370570] RAX: ffff88842de46a80 RBX: ffffffff84425840 RCX: ffffffff83418468 [ 778.372143] RDX: 000000000026f1da RSI: 0000000000000004 RDI: ffffffff8343af5e [ 778.373722] RBP: fffffbfff0884b08 R08: 0000000000000000 R09: ffff88842de46bcb [ 778.375292] R10: ffffed1085bc8d79 R11: 0000000000000001 R12: 0000000000000000 [ 778.376860] R13: ffffffff851124a0 R14: 0000000000000000 R15: dffffc0000000000 [ 778.378491] ? rcu_eqs_enter.constprop.0+0xb8/0xe0 [ 778.379606] ? default_idle_call+0x5e/0xe0 [ 778.380578] default_idle+0xa/0x10 [ 778.381406] default_idle_call+0x96/0xe0 [ 778.382350] do_idle+0x3d4/0x550 [ 778.383153] ? arch_cpu_idle_exit+0x40/0x40 [ 778.384143] cpu_startup_entry+0x19/0x20 [ 778.385078] start_kernel+0x3c7/0x3e5 [ 778.385978] secondary_startup_64_no_verify+0xb0/0xbb Fix the issue by providing new function tc_skb_ext_alloc() that allocates tc skb extension and initializes its memory to 0 before returning it to the caller. Change all existing users to use new API instead of calling skb_ext_add() directly. Fixes: 038ebb1a713d ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct") Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-26net: hns: Fix kernel-docYang Li1-3/+3
Fix function name in hns_ethtool.c kernel-doc comment to remove these warnings found by clang_w1. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting prototype for hns_nic_set_link_settings(). Prototype was for hns_nic_set_link_ksettings() instead. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting prototype for get_ethtool_stats(). Prototype was for hns_get_ethtool_stats() instead. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning: expecting prototype for get_strings(). Prototype was for hns_get_strings() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 'commit 262b38cdb3e4 ("net: ethernet: hisilicon: hns: use phydev from struct net_device")' Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25net: dsa: microchip: enable phy errata workaround on 9567George McCollister1-0/+1
Also enable phy errata workaround on 9567 since has the same errata as the 9477 according to the manufacture's documentation. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25net: usb: fix memory leak in smsc75xx_bindPavel Skripkin1-2/+6
Syzbot reported memory leak in smsc75xx_bind(). The problem was is non-freed memory in case of errors after memory allocation. backtrace: [<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline] [<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline] [<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460 [<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728 Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Cc: stable@kernel.vger.org Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25net: appletalk: cops: Fix data race in cops_probe1Saubhik Mukherjee1-2/+2
In cops_probe1(), there is a write to dev->base_addr after requesting an interrupt line and registering the interrupt handler cops_interrupt(). The handler might be called in parallel to handle an interrupt. cops_interrupt() tries to read dev->base_addr leading to a potential data race. So write to dev->base_addr before calling request_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: update existing VLANs from the bridge VLAN listVladimir Oltean1-4/+15
When running this sequence of operations: ip link add br0 type bridge vlan_filtering 1 ip link set swp4 master br0 bridge vlan add dev swp4 vid 1 We observe the traffic sent on swp4 is still untagged, even though the bridge has overwritten the existing VLAN entry: port vlan ids swp4 1 PVID br0 1 PVID Egress Untagged This happens because we didn't consider that the 'bridge vlan add' command just overwrites VLANs like it's nothing. We treat the 'vid 1 pvid untagged' and the 'vid 1' as two separate VLANs, and the first still has precedence when calling sja1105_build_vlan_table. Obviously there is a disagreement regarding semantics, and we end up doing something unexpected from the PoV of the bridge. Let's actually consider an "existing VLAN" to be one which is on the same port, and has the same VLAN ID, as one we already have, and update it if it has different flags than we do. The first blamed commit is the one introducing the bug, the second one is the latest on top of which the bugfix still applies. Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Fixes: 5899ee367ab3 ("net: dsa: tag_8021q: add a context structure") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: use 4095 as the private VLAN for untagged trafficVladimir Oltean1-12/+10
One thing became visible when writing the blamed commit, and that was that STP and PTP frames injected by net/dsa/tag_sja1105.c using the deferred xmit mechanism are always classified to the pvid of the CPU port, regardless of whatever VLAN there might be in these packets. So a decision needed to be taken regarding the mechanism through which we should ensure that delivery of STP and PTP traffic is possible when we are in a VLAN awareness mode that involves tag_8021q. This is because tag_8021q is not concerned with managing the pvid of the CPU port, since as far as tag_8021q is concerned, no traffic should be sent as untagged from the CPU port. So we end up not actually having a pvid on the CPU port if we only listen to tag_8021q, and unless we do something about it. The decision taken at the time was to keep VLAN 1 in the list of priv->dsa_8021q_vlans, and make it a pvid of the CPU port. This ensures that STP and PTP frames can always be sent to the outside world. However there is a problem. If we do the following while we are in the best_effort_vlan_filtering=true mode: ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan del dev swp2 vid 1 Then untagged and pvid-tagged frames should be dropped. But we observe that they aren't, and this is because of the precaution we took that VID 1 is always installed on all ports. So clearly VLAN 1 is not good for this purpose. What about VLAN 0? Well, VLAN 0 is managed by the 8021q module, and that module wants to ensure that 802.1p tagged frames are always received by a port, and are always transmitted as VLAN-tagged (with VLAN ID 0). Whereas we want our STP and PTP frames to be untagged if the stack sent them as untagged - we don't want the driver to just decide out of the blue that it adds VID 0 to some packets. So what to do? Well, there is one other VLAN that is reserved, and that is 4095: $ ip link add link swp2 name swp2.4095 type vlan id 4095 Error: 8021q: Invalid VLAN id. $ bridge vlan add dev swp2 vid 4095 Error: bridge: Vlan id is invalid. After we made this change, VLAN 1 is indeed forwarded and/or dropped according to the bridge VLAN table, there are no further alterations done by the sja1105 driver. Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: error out on unsupported PHY modeVladimir Oltean1-0/+1
The driver continues probing when a port is configured for an unsupported PHY interface type, instead it should stop. Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: add error handling in sja1105_setup()Vladimir Oltean1-3/+14
If any of sja1105_static_config_load(), sja1105_clocking_setup() or sja1105_devlink_setup() fails, we can't just return in the middle of sja1105_setup() or memory will leak. Add a cleanup path. Fixes: 0a7bdbc23d8a ("net: dsa: sja1105: move devlink param code to sja1105_devlink.c") Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: call dsa_unregister_switch when allocating memory failsVladimir Oltean1-4/+11
Unlike other drivers which pretty much end their .probe() execution with dsa_register_switch(), the sja1105 does some extra stuff. When that fails with -ENOMEM, the driver is quick to return that, forgetting to call dsa_unregister_switch(). Not critical, but a bug nonetheless. Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Fixes: a68578c20a96 ("net: dsa: Make deferred_xmit private to sja1105") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: fix VL lookup command packing for P/Q/R/SVladimir Oltean1-4/+19
At the beginning of the sja1105_dynamic_config.c file there is a diagram of the dynamic config interface layout: packed_buf | V +-----------------------------------------+------------------+ | ENTRY BUFFER | COMMAND BUFFER | +-----------------------------------------+------------------+ <----------------------- packed_size ------------------------> So in order to pack/unpack the command bits into the buffer, sja1105_vl_lookup_cmd_packing must first advance the buffer pointer by the length of the entry. This is similar to what the other *cmd_packing functions do. This bug exists because the command packing function for P/Q/R/S was copied from the E/T generation, and on E/T, the command was actually embedded within the entry buffer itself. Fixes: 94f94d4acfb2 ("net: dsa: sja1105: add static tables for virtual links") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: hso: fix control-request directionsJohan Hovold1-2/+2
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the tiocmset and rfkill requests which erroneously used usb_rcvctrlpipe(). Fixes: 72dc1c096c70 ("HSO: add option hso driver") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24r8152: check the informaton of the deviceHayes Wang1-5/+37
Verify some fields of the USB descriptor to make sure the driver could be used by the device. Besides, remove the check of endpoint number in rtl8152_probe(). usb_find_common_endpoints() includes it. BugLink: https://syzkaller.appspot.com/bug?id=912c9c373656996801b4de61f1e3cb326fe940aa Reported-by: syzbot+95afd23673f5dd295c57@syzkaller.appspotmail.com Fixes: c2198943e33b ("r8152: search the configuration of vendor mode") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: mt7530: fix VLAN traffic leaksDENG Qingfang1-8/+0
PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but was not reset when it is disabled, which may cause traffic leaks: ip link add br0 type bridge vlan_filtering 1 ip link add br1 type bridge vlan_filtering 1 ip link set swp0 master br0 ip link set swp1 master br1 ip link set br0 type bridge vlan_filtering 0 ip link set br1 type bridge vlan_filtering 0 # traffic in br0 and br1 will start leaking to each other As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the PCR_MATRIX write from mt7530_port_set_vlan_aware. Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: macb: ensure the device is available before accessing GEMGXL control ↵Zong Li1-0/+3
registers If runtime power menagement is enabled, the gigabit ethernet PLL would be disabled after macb_probe(). During this period of time, the system would hang up if we try to access GEMGXL control registers. We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context"). Add netif_running checking to ensure the device is available before accessing GEMGXL device. Changed in v2: - Use netif_running instead of its own flag Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: ethernet: mtk_eth_soc: Fix packet statistics support for MT7628/88Stefan Roese2-25/+66
The MT7628/88 SoC(s) have other (limited) packet counter registers than currently supported in the mtk_eth_soc driver. This patch adds support for reading these registers, so that the packet statistics are correctly updated. Additionally the defines for the non-MT7628 variant packet counter registers are added and used in this patch instead of using hard coded values. Signed-off-by: Stefan Roese <sr@denx.de> Fixes: 296c9120752b ("net: ethernet: mediatek: Add MT7628/88 SoC support") Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Reto Schneider <code@reto-schneider.ch> Cc: Reto Schneider <reto.schneider@husqvarnagroup.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-22net:sfc: fix non-freed irq in legacy irq modeÍñigo Huguet1-0/+1
SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed... Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-22net: lantiq: fix memory corruption in RX ringAleksander Jan Bajkowski1-5/+9
In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter. Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-22net: dsa: bcm_sf2: Fix bcm_sf2_reg_rgmii_cntrl() call for non-RGMII portFlorian Fainelli1-3/+2
We cannot call bcm_sf2_reg_rgmii_cntrl() for a port that is not RGMII, yet we do that in bcm_sf2_sw_mac_link_up() irrespective of the port's interface. Move that read until we have properly qualified the PHY interface mode. This avoids triggering a warning on 7278 platforms that have GMII ports. Fixes: 55cfeb396965 ("net: dsa: bcm_sf2: add function finding RGMII register") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: ethernet: mtk_eth_soc: Fix DIM support for MT7628/88Stefan Roese1-2/+8
When updating to latest mainline for some testing on the GARDENA smart gateway based on the MT7628, I noticed that ethernet does not work any more. Commit e9229ffd550b ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation") introduced this problem, as it missed the RX_DIM & TX_DIM configuration for this SoC variant. This patch fixes this by calling mtk_dim_rx() & mtk_dim_tx() in this case as well. Signed-off-by: Stefan Roese <sr@denx.de> Fixes: e9229ffd550b ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation") Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Reto Schneider <code@reto-schneider.ch> Cc: Reto Schneider <reto.schneider@husqvarnagroup.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: stmmac: fix system hang if change mac address after interface ifdownJoakim Zhang1-1/+10
Fix system hang with below sequences: ~# ifconfig ethx down ~# ifconfig ethx hw ether xx:xx:xx:xx:xx:xx After ethx down, stmmac all clocks gated off and then register access causes system hang. Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()Joakim Zhang1-6/+6
This should be a mistake to fix conflicts when removing RFC tag to repost the patch. Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net/qla3xxx: fix schedule while atomic in ql_sem_spinlockZheyu Ma1-1/+1
When calling the 'ql_sem_spinlock', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. The KASAN's log reveals it: [ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002 [ 3.238748 ] 2 locks held by swapper/0/1: [ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x41/0x60 [ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at: ql3xxx_probe+0x2aa/0xea0 [ 3.240873 ] Modules linked in: [ 3.241187 ] irq event stamp: 460854 [ 3.241541 ] hardirqs last enabled at (460853): [<ffffffff843051bf>] _raw_spin_unlock_irqrestore+0x4f/0x70 [ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>] _raw_spin_lock_irqsave+0x2a/0x70 [ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>] __do_softirq+0x2e4/0x4b1 [ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>] irq_exit_rcu+0x100/0x110 [ 3.242245 ] Preemption disabled at: [ 3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] Kernel panic - not syncing: scheduling while atomic [ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00145 -gee7dc339169-dirty #16 [ 3.242245 ] Call Trace: [ 3.242245 ] dump_stack+0xba/0xf5 [ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0 [ 3.242245 ] panic+0x15a/0x3f2 [ 3.242245 ] ? vprintk+0x76/0x150 [ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] __schedule_bug+0xae/0xe0 [ 3.242245 ] __schedule+0x72e/0xa00 [ 3.242245 ] schedule+0x43/0xf0 [ 3.242245 ] schedule_timeout+0x28b/0x500 [ 3.242245 ] ? del_timer_sync+0xf0/0xf0 [ 3.242245 ] ? msleep+0x2f/0x70 [ 3.242245 ] msleep+0x59/0x70 [ 3.242245 ] ql3xxx_probe+0x307/0xea0 [ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70 [ 3.242245 ] ? pci_device_remove+0x110/0x110 [ 3.242245 ] local_pci_probe+0x45/0xa0 [ 3.242245 ] pci_device_probe+0x12b/0x1d0 [ 3.242245 ] really_probe+0x2a9/0x610 [ 3.242245 ] driver_probe_device+0x90/0x1d0 [ 3.242245 ] ? mutex_lock_nested+0x1b/0x20 [ 3.242245 ] device_driver_attach+0x68/0x70 [ 3.242245 ] __driver_attach+0x124/0x1b0 [ 3.242245 ] ? device_driver_attach+0x70/0x70 [ 3.242245 ] bus_for_each_dev+0xbb/0x110 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] driver_attach+0x27/0x30 [ 3.242245 ] bus_add_driver+0x1eb/0x2a0 [ 3.242245 ] driver_register+0xa9/0x180 [ 3.242245 ] __pci_register_driver+0x82/0x90 [ 3.242245 ] ? yellowfin_init+0x25/0x25 [ 3.242245 ] ql3xxx_driver_init+0x23/0x25 [ 3.242245 ] do_one_initcall+0x7f/0x3d0 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.242245 ] kernel_init_freeable+0x2aa/0x301 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] kernel_init+0x18/0x190 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ret_from_fork+0x1f/0x30 [ 3.242245 ] Dumping ftrace buffer: [ 3.242245 ] (ftrace buffer empty) [ 3.242245 ] Kernel Offset: disabled [ 3.242245 ] Rebooting in 1 seconds. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: encx24j600: fix kernel-doc syntax in file headersAditya Srivastava2-2/+2
The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. The header for drivers/net/ethernet/microchip/encx24j600 files follows this syntax, but the content inside does not comply with kernel-doc. This line was probably not meant for kernel-doc parsing, but is parsed due to the presence of kernel-doc like comment syntax(i.e, '/**'), which causes unexpected warning from kernel-doc. For e.g., running scripts/kernel-doc -none drivers/net/ethernet/microchip/encx24j600_hw.h emits: warning: expecting prototype for h(). Prototype was for _ENCX24J600_HW_H() instead Provide a simple fix by replacing such occurrences with general comment format, i.e. '/*', to prevent kernel-doc from parsing it. Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21ixgbe: fix large MTU request from VFJesse Brandeburg1-9/+7
Check that the MTU value requested by the VF is in the supported range of MTUs before attempting to set the VF large packet enable, otherwise reject the request. This also avoids unnecessary register updates in the case of the 82599 controller. Fixes: 872844ddb9e4 ("ixgbe: Enable jumbo frames support w/ SR-IOV") Co-developed-by: Piotr Skajewski <piotrx.skajewski@intel.com> Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-19net: hso: bail out on interrupt URB allocation failureJohan Hovold1-7/+7
Commit 31db0dbd7244 ("net: hso: check for allocation failure in hso_create_bulk_serial_device()") recently started returning an error when the driver fails to allocate resources for the interrupt endpoint and tiocmget functionality. For consistency let's bail out from probe also if the URB allocation fails. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-19cxgb4: avoid accessing registers when clearing filtersRaju Rangoju1-1/+1
Hardware register having the server TID base can contain invalid values when adapter is in bad state (for example, due to AER fatal error). Reading these invalid values in the register can lead to out-of-bound memory access. So, fix by using the saved server TID base when clearing filters. Fixes: b1a79360ee86 ("cxgb4: Delete all hash and TCAM filters before resource cleanup") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-19mlx5e: add add missing BH locking around napi_schdule()Jakub Kicinski1-2/+5
It's not correct to call napi_schedule() in pure process context. Because we use __raise_softirq_irqoff() we require callers to be in a context which will eventually lead to softirq handling (hardirq, bh disabled, etc.). With code as is users will see: NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!! Fixes: a8dd7ac12fc3 ("net/mlx5e: Generalize RQ activation") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19net/mlx5: Set term table as an unmanaged flow tableAriel Levkovich1-2/+5
Termination tables are restricted to have the default miss action and cannot be set to forward to another table in case of a miss. If the fs prio of the termination table is not the last one in the list, fs_core will attempt to attach it to another table. Set the unmanaged ft flag when creating the termination table ft and select the tc offload prio for it to prevent fs_core from selecting the forwarding to next ft miss action and use the default one. In addition, set the flow that forwards to the termination table to ignore ft level restrictions since the ft level is not set by fs_core for unamanged fts. Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink") Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
2021-05-19net/mlx5: Don't overwrite HCA capabilities when setting MSI-X countLeon Romanovsky1-5/+17
During driver probe of device that has dynamic MSI-X feature enabled, the following error is printed in some FW flavour (not released yet). mlx5_core 0000:06:00.0: firmware version: 4.7.4387 mlx5_core 0000:06:00.0: 126.016 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x16 link) mlx5_core 0000:06:00.0: mlx5_cmd_check:777:(pid 70599): SET_HCA_CAP(0x109) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x0) mlx5_core 0000:06:00.0: set_hca_cap:622:(pid 70599): handle_hca_cap failed mlx5_core 0000:06:00.0: mlx5_function_setup:1045:(pid 70599): set_hca_cap failed mlx5_core 0000:06:00.0: probe_one:1465:(pid 70599): mlx5_init_one failed with error code -22 mlx5_core: probe of 0000:06:00.0 failed with error -22 In order to make the setting capability of MSI-X future proof, let's query the current capabilities first. Fixes: 604774add516 ("net/mlx5: Dynamically assign MSI-X vectors count") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19{net,vdpa}/mlx5: Configure interface MAC into mpfs L2 tableEli Cohen4-4/+6
net/mlx5: Expose MPFS configuration API MPFS is the multi physical function switch that bridges traffic between the physical port and any physical functions associated with it. The driver is required to add or remove MAC entries to properly forward incoming traffic to the correct physical function. We export the API to control MPFS so that other drivers, such as mlx5_vdpa are able to add MAC addresses of their network interfaces. The MAC address of the vdpa interface must be configured into the MPFS L2 address. Failing to do so could cause, in some NIC configurations, failure to forward packets to the vdpa network device instance. Fix this by adding calls to update the MPFS table. CC: <mst@redhat.com> CC: <jasowang@redhat.com> CC: <virtualization@lists.linux-foundation.org> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19net/mlx5e: Fix error path of updating netdev queuesAya Levin1-1/+1
Avoid division by zero in the error flow. In the driver TC number can be either 1 or 8. When TC count is set to 1, driver zero netdev->num_tc. Hence, need to convert it back from 0 to 1 in the error flow. Fixes: fa3748775b92 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19net/mlx5e: Reject mirroring on source port change encap rulesVlad Buslov1-0/+6
Rules with MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE dest flag are translated to destination FT in eswitch. Currently it is not possible to mirror such rules because firmware doesn't support mixing FT and Vport destinations in single rule when one of them adds encapsulation. Since the only use case for MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE destination is support for tunnel endpoints on VF and trying to offload such rule with mirror action causes either crash in fs_core or firmware error with syndrome 0xff6a1d, reject all such rules in mlx5 TC layer. Fixes: 10742efc20a4 ("net/mlx5e: VF tunnel TX traffic offloading") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19net/mlx5e: Fix multipath lag activationDima Chumak1-0/+6
When handling FIB_EVENT_ENTRY_REPLACE event for a new multipath route, lag activation can be missed if a stale (struct lag_mp)->mfi pointer exists, which was associated with an older multipath route that had been removed. Normally, when a route is removed, it triggers mlx5_lag_fib_event(), which handles FIB_EVENT_ENTRY_DEL and clears mfi pointer. But, if mlx5_lag_check_prereq() condition isn't met, for example when eswitch is in legacy mode, the fib event is skipped and mfi pointer becomes stale. Fix by resetting mfi pointer to NULL every time mlx5_lag_mp_init() is called. Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19net/mlx5e: reset XPS on error flow if netdev isn't registered yetSaeed Mahameed1-0/+7
mlx5e_attach_netdev can be called prior to registering the netdevice: Example stack: ipoib_new_child_link -> ipoib_intf_init-> rdma_init_netdev-> mlx5_rdma_setup_rn-> mlx5e_attach_netdev-> mlx5e_num_channels_changed -> mlx5e_set_default_xps_cpumasks -> netif_set_xps_queue -> __netif_set_xps_queue -> kmalloc If any later stage fails at any point after mlx5e_num_channels_changed() returns, XPS allocated maps will never be freed as they are only freed during netdev unregistration, which will never happen for yet to be registered netdevs. Fixes: 3909a12e7913 ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2021-05-19net/mlx5e: Make sure fib dev exists in fib eventRoi Dayan1-1/+1
For unreachable route entry the fib dev does not exists. Fixes: 8914add2c9e5 ("net/mlx5e: Handle FIB events to update tunnel endpoint device") Reported-by: Dennis Afanasev <dennis.afanasev@stateless.net> Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19net/mlx5e: Fix null deref accessing lag devRoi Dayan1-0/+2
It could be the lag dev is null so stop processing the event. In bond_enslave() the active/backup slave being set before setting the upper dev so first event is without an upper dev. After setting the upper dev with bond_master_upper_dev_link() there is a second event and in that event we have an upper dev. Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19net/mlx5e: Fix nullptr in mlx5e_tc_add_fdb_flow()Dima Chumak1-3/+9
The result of __dev_get_by_index() is not checked for NULL, which then passed to mlx5e_attach_encap() and gets dereferenced. Also, in case of a successful lookup, the net_device reference count is not incremented, which may result in net_device pointer becoming invalid at any time during mlx5e_attach_encap() execution. Fix by using dev_get_by_index(), which does proper reference counting on the net_device pointer. Also, handle nullptr return value when mirred device is not found. It's safe to call dev_put() on the mirred net_device pointer, right after mlx5e_attach_encap() call, because it's not being saved/copied down the call chain. Fixes: 3c37745ec614 ("net/mlx5e: Properly deal with encap flows add/del under neigh update") Addresses-Coverity: ("Dereference null return value") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19net/mlx5: SF, Fix show state inactive when its inactivatedParav Pandit1-7/+11
When a SF is inactivated and when it is in a TEARDOWN_REQUEST state, driver still returns its state as active. This is incorrect. Fix it by treating TEARDOWN_REQEUST as inactive state. When a SF is still attached to the driver, on user request to reactivate EINVAL error is returned. Inform user about it with better code EBUSY and informative error message. Fixes: 6a3273217469 ("net/mlx5: SF, Port function state change support") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19net/mlx5: Fix err prints and return when creating termination tableRoi Dayan1-12/+11
Fix print to print correct error code and not using IS_ERR() which will just result in always printing 1. Also return real err instead of always -EOPNOTSUPP. Fixes: 10caabdaad5a ("net/mlx5e: Use termination table for VLAN push actions") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19net/mlx5: Set reformat action when needed for termination rulesJianbo Liu1-21/+10
For remote mirroring, after the tunnel packets are received, they are decapsulated and sent to representor, then re-encapsulated and sent out over another tunnel. So reformat action is set only when the destination is required to do encapsulation. Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19net/mlx5e: Fix nullptr in add_vlan_push_action()Dima Chumak1-2/+6
The result of dev_get_by_index_rcu() is not checked for NULL and then gets dereferenced immediately. Also, the RCU lock must be held by the caller of dev_get_by_index_rcu(), which isn't satisfied by the call stack. Fix by handling nullptr return value when iflink device is not found. Add RCU locking around dev_get_by_index_rcu() to avoid possible adverse effects while iterating over the net_device's hlist. It is safe not to increment reference count of the net_device pointer in case of a successful lookup, because it's already handled by VLAN code during VLAN device registration (see register_vlan_dev and netdev_upper_dev_link). Fixes: 278748a95aa3 ("net/mlx5e: Offload TC e-switch rules with egress VLAN device") Addresses-Coverity: ("Dereference null return value") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-19{net, RDMA}/mlx5: Fix override of log_max_qp by other deviceMaor Gottlieb1-6/+5
mlx5_core_dev holds pointer to static profile, hence when the log_max_qp of the profile is override by some device, then it effect all other mlx5 devices that share the same profile. Fix it by having a profile instance for every mlx5 device. Fixes: 883371c453b9 ("net/mlx5: Check FW limitations on log_max_qp before setting it") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18net: hns3: check the return of skb_checksum_help()Yunsheng Lin1-7/+3
Currently skb_checksum_help()'s return is ignored, but it may return error when it fails to allocate memory when linearizing. So adds checking for the return of skb_checksum_help(). Fixes: 76ad4f0ee747("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18net: hns3: fix user's coalesce configuration lost issueHuazhong Tan2-85/+63
Currently, when adaptive is on, the user's coalesce configuration may be overwritten by the dynamic one. The reason is that user's configurations are saved in struct hns3_enet_tqp_vector whose value maybe changed by the dynamic algorithm. To fix it, use struct hns3_nic_priv instead of struct hns3_enet_tqp_vector to save and get the user's configuration. BTW, operations of storing and restoring coalesce info in the reset process are unnecessary now, so remove them as well. Fixes: 434776a5fae2 ("net: hns3: add ethtool_ops.set_coalesce support to PF") Fixes: 7e96adc46633 ("net: hns3: add ethtool_ops.get_coalesce support to PF") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18net: hns3: put off calling register_netdev() until client initialize completeJian Shen1-8/+8
Currently, the netdevice is registered before client initializing complete. So there is a timewindow between netdevice available and usable. In this case, if user try to change the channel number or ring param, it may cause the hns3_set_rx_cpu_rmap() being called twice, and report bug. [47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0 [47199.430340] hns3 0000:35:00.0 eth1: already uninitialized [47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1 [47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1 [47200.163524] ------------[ cut here ]------------ [47200.171674] kernel BUG at lib/cpu_rmap.c:142! [47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge] [47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G O 5.11.0-rc3+ #1 [47200.215601] Hardware name: , xxxxxx 02/04/2021 [47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [47200.230188] pc : cpu_rmap_add+0x38/0x40 [47200.237472] lr : irq_cpu_rmap_add+0x84/0x140 [47200.243291] sp : ffff800010e93a30 [47200.247295] x29: ffff800010e93a30 x28: ffff082100584880 [47200.254155] x27: 0000000000000000 x26: 0000000000000000 [47200.260712] x25: 0000000000000000 x24: 0000000000000004 [47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0 [47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680 [47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0 [47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0 [47200.293456] x15: fffffc2082990600 x14: dead000000000122 [47200.300059] x13: ffffffffffffffff x12: 000000000000003e [47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000 [47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700 [47200.319682] x7 : 0000000000000000 x6 : 000000000000003f [47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20 [47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80 [47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004 [47200.346058] Call trace: [47200.349324] cpu_rmap_add+0x38/0x40 [47200.354300] hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3] [47200.362294] hns3_reset_notify_init_enet+0x1cc/0x340 [hns3] [47200.370049] hns3_change_channels+0x40/0xb0 [hns3] [47200.376770] hns3_set_channels+0x12c/0x2a0 [hns3] [47200.383353] ethtool_set_channels+0x140/0x250 [47200.389772] dev_ethtool+0x714/0x23d0 [47200.394440] dev_ioctl+0x4cc/0x640 [47200.399277] sock_do_ioctl+0x100/0x2a0 [47200.404574] sock_ioctl+0x28c/0x470 [47200.409079] __arm64_sys_ioctl+0xb4/0x100 [47200.415217] el0_svc_common.constprop.0+0x84/0x210 [47200.422088] do_el0_svc+0x28/0x34 [47200.426387] el0_svc+0x28/0x70 [47200.431308] el0_sync_handler+0x1a4/0x1b0 [47200.436477] el0_sync+0x174/0x180 [47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000) [47200.448869] ---[ end trace a01efe4ce42e5f34 ]--- The process is like below: excuting hns3_client_init | register_netdev() | hns3_set_channels() | | hns3_set_rx_cpu_rmap() hns3_reset_notify_uninit_enet() | | | quit without calling function | hns3_free_rx_cpu_rmap for flag | HNS3_NIC_STATE_INITED is unset. | | | hns3_reset_notify_init_enet() | | set HNS3_NIC_STATE_INITED call hns3_set_rx_cpu_rmap()-- crash Fix it by calling register_netdev() at the end of function hns3_client_init(). Fixes: 08a100689d4b ("net: hns3: re-organize vector handle") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-04 07:34:18 +0300