| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
cpsw_ale_create() can return both NULL and PTR_ERR(), but all of
the caller only check NULL for error handling. This patch convert
it to only return PTR_ERR() in all error cases, and the caller using
IS_ERR() instead of NULL test.
Fixes: 4b41d3436796 ("net: ethernet: ti: cpsw: allow untagged traffic on host port")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for XRC-SRQ's and XRC-QP's for upper layer driver.
We maintain separate bitmaps for resource management for srq and
xrc-srq, However, the range in FW is one, The xrc-srq's are first
and then the srq's follow. Therefore we maintain a srq-id offset.
v2: perform cleanups if XRC bitmpas allocation fail.
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Bason <ybason@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
First ILT page for TSDM client is allocated for XRC-SRQ's.
For regular SRQ's skip first ILT page that is reserved for
XRC-SRQ's.
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Bason <ybason@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Every time we access the 'etype' and 'vlan_tci' fields from struct
igc_nfc_filter to enable or disable filters in hardware we have to
convert them from big endian to host order so it makes more sense to
simply have these fields in host order.
The byte order conversion should take place in igc_ethtool_get_nfc_
rule() and igc_ethtool_add_nfc_rule(), which are called by .get_rxnfc
and .set_rxnfc ethtool ops, since ethtool subsystem is the one who deals
with them in big endian order.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The Network Flow Classification (NFC) support code from IGC driver uses
terms such as 'rule', 'filter', 'entry', 'input' interchangeably when
referring to NFC rules, making it harder to follow the code. This patch
renames IGC's internal APIs, structs, and variables so we stick with the
term 'rule' since this is the term used in ethtool APIs. It also removes
some not applicable comments along the way. No functionality is changed
by this patch.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch adds the prefix 'igc_ethtool_' to all functions defined in
igc_ethtool.c so they align with the name convention already followed by
other parts of the driver (e.g. igc_tsn, igc_ptp). Also, this avoids
some name clashing with functions added to igc_main.c by upcoming
patches in this series. No functionality is changed by this patch, just
function renaming.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch re-writes the second half of igc_ethtool_get_nfc_entry() to
follow the 'return early' pattern seen in other parts of the driver and
removes some duplicate comments.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch does a trivial change in igc_ethtool_get_rxnfc() and
igc_ethtool_set_rxnfc() to simplify their logic.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The local function igc_max_channels() is a pointless wrapper around
igc_get_max_rss_queues(). This patch removes it and updates the callers
accordingly. It also does some cleanup on igc_get_max_rss_queues().
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The 'cookie' field is not used anywhere in the code so this patch
removes it from struct igc_nfc_filter.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Per queue good transmitted packet counter not applicable for i225 device.
This patch comes to clean up this register.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Header redirection missed packet counter not applicable for i225 device.
This patch comes to clean up this register.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Part of circuit breaker registers is obsolete
and not applicable for i225 device.
This patch comes to clean up these registers.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
We are seeing a deadlock in e1000 down when NAPI is being disabled. Looking
over the kernel function trace of the system it appears that the interface
is being closed and then a reset is hitting which deadlocks the interface
as the NAPI interface is already disabled.
To prevent this from happening I am disabling the reset task when
__E1000_DOWN is already set. In addition code has been added so that we set
the __E1000_DOWN while holding the __E1000_RESET flag in e1000_close in
order to guarantee that the reset task will not run after we have started
the close call.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Maxim Zhukov <mussitantesmortem@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch adds support for Network Flow Classification (NFC) rules
based on source MAC address. Note that the controller doesn't support
rules with both source and destination addresses set, so this special
case is checked in igc_add_ethtool_nfc_entry().
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch extends MAC address filter internal APIs igc_add_mac_filter()
and igc_del_mac_filter(), as well as local helpers, to support filters
based on source address.
A new parameters 'type' is added to the APIs to indicate if the filter
type is source or destination. In case it is source type, the RAH
register is configured accordingly in igc_set_mac_filter_hw().
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Linux 5.7-rc6
Conflict in drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
resolved by deleting dr_cq_event, matching how netdev resolved it.
Required for dependencies in the following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In igc_adapter we keep a sort of shadow copy of RAL and RAH registers.
There is not much benefit in keeping it, at the cost of maintainability,
since adding/removing MAC address filters is not hot path, and we
already keep filters information in adapter->nfc_filter_list for cleanup
and restoration purposes.
So in order to simplify the MAC address filtering code and prepare it
for source address support, this patch removes the mac_table from
igc_adapter.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
MAC address filters based on source address are not currently supported
by the IGC driver. Despite of that, the driver have some dangling code
to handle it, inherited from IGB driver. This patch removes that code to
prepare for a follow up patch that adds proper source MAC address filter
support.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In "wireguard: queueing: preserve flow hash across packet scrubbing", we
were required to slightly increase the size of the receive replay
counter to something still fairly small, but an increase nonetheless.
It turns out that we can recoup some of the additional memory overhead
by splitting up the prior union type into two distinct types. Before, we
used the same "noise_counter" union for both sending and receiving, with
sending just using a simple atomic64_t, while receiving used the full
replay counter checker. This meant that most of the memory being
allocated for the sending counter was being wasted. Since the old
"noise_counter" type increased in size in the prior commit, now is a
good time to split up that union type into a distinct "noise_replay_
counter" for receiving and a boring atomic64_t for sending, each using
neither more nor less memory than required.
Also, since sometimes the replay counter is accessed without
necessitating additional accesses to the bitmap, we can reduce cache
misses by hoisting the always-necessary lock above the bitmap in the
struct layout. We also change a "noise_replay_counter" stack allocation
to kmalloc in a -DDEBUG selftest so that KASAN doesn't trigger a stack
frame warning.
All and all, removing a bit of abstraction in this commit makes the code
simpler and smaller, in addition to the motivating memory usage
recuperation. For example, passing around raw "noise_symmetric_key"
structs is something that really only makes sense within noise.c, in the
one place where the sending and receiving keys can safely be thought of
as the same type of object; subsequent to that, it's important that we
uniformly access these through keypair->{sending,receiving}, where their
distinct roles are always made explicit. So this patch allows us to draw
that distinction clearly as well.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's important that we clear most header fields during encapsulation and
decapsulation, because the packet is substantially changed, and we don't
want any info leak or logic bug due to an accidental correlation. But,
for encapsulation, it's wrong to clear skb->hash, since it's used by
fq_codel and flow dissection in general. Without it, classification does
not proceed as usual. This change might make it easier to estimate the
number of innerflows by examining clustering of out of order packets,
but this shouldn't open up anything that can't already be inferred
otherwise (e.g. syn packet size inference), and fq_codel can be disabled
anyway.
Furthermore, it might be the case that the hash isn't used or queried at
all until after wireguard transmits the encrypted UDP packet, which
means skb->hash might still be zero at this point, and thus no hash
taken over the inner packet data. In order to address this situation, we
force a calculation of skb->hash before encrypting packet data.
Of course this means that fq_codel might transmit packets slightly more
out of order than usual. Toke did some testing on beefy machines with
high quantities of parallel flows and found that increasing the
reply-attack counter to 8192 takes care of the most pathological cases
pretty well.
Reported-by: Dave Taht <dave.taht@gmail.com>
Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@toke.dk>
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prior we read the preshared key after dropping the handshake lock, which
isn't an actual crypto issue if it races, but it's still not quite
correct. So copy that part of the state into a temporary like we do with
the rest of the handshake state variables. Then we can release the lock,
operate on the temporary, and zero it out at the end of the function. In
performance tests, the impact of this was entirely unnoticable, probably
because those bytes are coming from the same cacheline as other things
that are being copied out in the same manner.
Reported-by: Matt Dunwoodie <ncon@noconroy.net>
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
1GbE Intel Wired LAN Driver Updates 2020-05-19
This series contains updates to igc only.
Sasha cleans up the igc driver code that is not used or needed.
Vitaly cleans up driver code that was used to support Virtualization on
a device that is not supported by igc, so remove the dead code.
Andre renames a few macros to align with register and field names
described in the data sheet. Also adds the VLAN Priority Queue Fliter
and EType Queue Filter registers to the list of registers dumped by
igc_get_regs(). Added additional debug messages and updated return codes
for unsupported features. Refactored the VLAN priority filtering code to
move the core logic into igc_main.c. Cleaned up duplicate code and
useless code.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tx data FIFO Head/Tail, Saved and Packet Count registers
not applicable for i225 LAN controller.
This patch comes to clean up these registers.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Device reset assert for interrupt cause register not in
use for i225 device.
This patch comes to clean up this define.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch adds the EType Queue Filter (ETQF) registers to the list of
registers dumped by igc_get_regs().
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The whole ethertype filtering code is implemented in igc_ethtool.c and
mixes logic from ethtool and core parts. This patch refactors it so core
logic is moved to igc_main.c, aligning the ethertype filtering code
organization with the rest of the filtering code from the driver (MAC
address and VLAN priority).
Besides moving code to igc_main.c, this patch also does some minor
improvements to the code. Below are some highlights.
In case all filters are already in use and the user tries to add another
filter, we return -ENOSPC instead of -EINVAL so a more meaningful error
code is provided. This also aligns with the behavior implemented in MAC
address filtering code.
With this code refactoring, 'etype_bitmap' array in struct igc_adapter
and 'etype_reg_index' in struct igc_nfc_filter are not needed anymore
and are removed.
Log messages are added to help debugging the ethertype filtering code.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The I225 controller has 8 ethertype filters, not 4. This patch fixes the
MAX_ETYPE_FILTER macro accordingly.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The driver only supports hardware timestamping for all incoming
traffic (HWTSTAMP_FILTER_ALL) which is enabled via Rx Time Sync
Control (TSYNCRXCTL) register already. Therefore, the ethertype
filter set in in igc_ptp_set_timestamp_mode() is useless so this
patch removes it.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch remove the IGC_RXPBS macro defined in line 233 since it is
already defined in line 18 with the exactly same value.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
compile-tested only
With legacy PM hooks, it was the responsibility
of a driver to manage PCI states and also
device's power state. The generic approach is
to let PCI core handle the work.
The suspend callback enables/disables PCI wake
on the basis of "cp->wol_enabled" variable
which is unknown to PCI core. To utilise its
need, call device_set_wakeup_enable().
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
compile-tested only
With legacy PM hooks, it was the responsibility
of a driver to manage PCI states and also
device's power state. The generic approach is
to let PCI core handle the work.
PCI core passes "struct device*" as an argument
to the .suspend() and .resume() callbacks. As
these callabcks work with "struct net_device*",
extract it from "struct device*" using
dev_get_drv_data().
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The whole VLAN priority filtering code is implemented in igc_ethtool.c
and mixes logic from ethtool and core parts. This patch refactors it so
core logic is moved to igc_main.c, aligning the VLAN priority filtering
code organization with the MAC address filtering code.
This patch also takes the opportunity to add some log messages to ease
debugging.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
For backwards compatibility it may be required for the firmware to
disable certain features depending on the features supported by
the host. Combine the host feature bits and firmware feature bits
and write this back to the firmware.
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clean up name aliasing. Some features gets enabled using a slightly
different method, but the bitmap for these were stored in the same
field. Rename their #defines and move the bitmap to a new variable.
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The I225 controller supports Rx queue assignment based on VLAN priority
only. Other Tag Control Information (TCI) are valid, but not supported
by the driver. So this patch changes the returning code from igc_add_
ethtool_nfc_entry() to -EOPNOTSUPP in order to provide more meaningful
information on why the function failed.
It also adds a debug messages to give the user a hint about what went
wrong with the NFC setup.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch adds the VLAN Priority Queue Filter Register (VLANPQF) to the
list of registers dumped by igc_get_regs().
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch renames the IGC_VLAPQF macro to IGC_VLANPQF as well as
related macros so they match the register name and fields described in
the data sheet.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Packet buffer allocation, reserved word and pointer guard
not applicable for i225 parts.
This patch comes to clean up these obsolete defines
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
igc driver has leftovers from the previous device that supported
Virtualization. This can be found in the function IGC_REMOVED which
became obsolete, and can be removed.
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
GCR (PCIe Control) register not in use and should be removed
This patch clean up this register
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Device id 0927 is the RTL8153B-based component of the 'Surface USB-C to
Ethernet and USB Adapter' and may be used as a component of other devices
in future. Tested and working with the r8152 driver.
Update the cdc_ether blacklist due to the RTL8153 'network jam on suspend'
issue which this device will cause (personally confirmed).
Signed-off-by: Marc Payne <marc.payne@mdpsys.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.7
Third and most likely the last set of fixes for v5.7. Only one
iwlwifi fix this time.
iwlwifi
* another fix for QuZ device configuration
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In bmac_get_station_address, We're reading two bytes at a time from ROM,
but we do that six times, resulting in 12 bytes of read & writes. This
means we will write off the end of the six-byte destination buffer.
This change fixes the for-loop to only read/write six bytes.
Based on a proposed fix from Finn Thain <fthain@telegraphics.com.au>.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reported-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Reported-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
1GbE Intel Wired LAN Driver Updates 2020-05-18
This series contains updates to igc driver only.
Sasha adds ECN support for TSO by adding the NETIF_F_TSO_ECN flag, which
aligns with other Intel drivers. Also cleaned up defines that are not
supported or used in the igc driver.
Andre does most of the changes with updating the log messages for igc
driver.
Vitaly adds support for EEPROM, register and link ethtool
self-tests.
v2: Fixed up the added ethtool self-tests based on feedback from the
community. Dropped the four patches that removed '\n' from log
messages.
v3: Reverted the debug message changes in patch 2 for messages in
igc_probe, also made reg_test[] static in patch 3 based on community
feedback
v4: Updated the patch description for patch 2, which referred to changes
that no longer existed in the patch
v5: Scrubbed patches 4-7 patch description, which also referred to
changes that no longer existed in the patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If 'thermal_cooling_device_register()' fails, we must undo what has been
allocated so far. So we must go to 'err_thermal_destroy' instead of
returning directly
In case of error in 'ath11k_thermal_register()', the previous
'thermal_cooling_device_register()' call must also be undone. Move the
'ar->thermal.cdev = cdev' a few lines above in order for this to be done
in 'ath11k_thermal_unregister()' which is called in the error handling
path.
Fixes: 2a63bbca06b2 ("ath11k: add thermal cooling device support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200513201454.258111-1-christophe.jaillet@wanadoo.fr
|
|
In [0] a user reported reproducible tx timeouts on RTL8168f except
PktCntrDisable is set and irq coalescing is enabled.
Realtek told me that they are not aware of any related hw issue on
this chip version, therefore root cause is still unknown. It's not
clear whether the issue affects one or more chip versions in general,
or whether issue is specific to reporter's system.
Due to this level of uncertainty, and due to the fact that I'm aware
of this one report only, let's apply the workaround on net-next only.
After this change setting irq coalescing via ethtool can reliably
avoid the issue on the affected system.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=207205
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Let the compiler decide about inlining, and as confirmed by Eric it's
better to use WRITE_ONCE here to ensure that the descriptor ownership
is transferred to NIC immediately.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid the goto from the rx error handling branch into the else branch,
and in general avoid having the main rx work in the else branch.
In addition ensure proper reverse xmas tree order of variables in the
for loop.
No functional change intended.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
