summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-05-27ne2k-pci: Fix various coding-style issues and improve printk() usageArmin Wolf1-163/+182
Fixed a ton of minor checkpatch errors/warnings and remove version printing at module init/when device is found and use MODULE_VERSION instead. Also modifying the RTL8029 PCI string to include the compatible RTL8029AS nic. The only mayor issue remaining is the missing SPDX tag, but since the exact version of the GPL is not stated anywhere inside the file, its impossible to add such a tag at the moment. But maybe it is possible, since 8390.h states Donald Becker's 8390 drivers are licensed under GPL 2.2 only (= GPL-2.0-only ?). The kernel module containing this patch compiles and runs without problems on a RTL8029AS-based NE2000 clone card with kernel 5.7.0-rc6. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27macvlan: Skip loopback packets in RX handlerAlexander Sverdlin1-0/+4
Ignore loopback-originatig packets soon enough and don't try to process L2 header where it doesn't exist. The very similar br_handle_frame() in bridge code performs exactly the same check. This is an example of such ICMPv6 packet: skb len=96 headroom=40 headlen=96 tailroom=56 mac=(40,0) net=(40,40) trans=80 shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0xae2e9a2f ip_summed=1 complete_sw=0 valid=0 level=0) hash(0xc97ebd88 sw=1 l4=1) proto=0x86dd pkttype=5 iif=24 dev name=etha01.212 feat=0x0x0000000040005000 skb headroom: 00000000: 00 7c 86 52 84 88 ff ff 00 00 00 00 00 00 08 00 skb headroom: 00000010: 45 00 00 9e 5d 5c 40 00 40 11 33 33 00 00 00 01 skb headroom: 00000020: 02 40 43 80 00 00 86 dd skb linear: 00000000: 60 09 88 bd 00 38 3a ff fe 80 00 00 00 00 00 00 skb linear: 00000010: 00 40 43 ff fe 80 00 00 ff 02 00 00 00 00 00 00 skb linear: 00000020: 00 00 00 00 00 00 00 01 86 00 61 00 40 00 00 2d skb linear: 00000030: 00 00 00 00 00 00 00 00 03 04 40 e0 00 00 01 2c skb linear: 00000040: 00 00 00 78 00 00 00 00 fd 5f 42 68 23 87 a8 81 skb linear: 00000050: 00 00 00 00 00 00 00 00 01 01 02 40 43 80 00 00 skb tailroom: 00000000: ... skb tailroom: 00000010: ... skb tailroom: 00000020: ... skb tailroom: 00000030: ... Call Trace, how it happens exactly: ... macvlan_handle_frame+0x321/0x425 [macvlan] ? macvlan_forward_source+0x110/0x110 [macvlan] __netif_receive_skb_core+0x545/0xda0 ? enqueue_task_fair+0xe5/0x8e0 ? __netif_receive_skb_one_core+0x36/0x70 __netif_receive_skb_one_core+0x36/0x70 process_backlog+0x97/0x140 net_rx_action+0x1eb/0x350 ? __hrtimer_run_queues+0x136/0x2e0 __do_softirq+0xe3/0x383 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.4+0x4e/0x50 netif_rx_ni+0x60/0xd0 dev_loopback_xmit+0x83/0xf0 ip6_finish_output2+0x575/0x590 [ipv6] ? ip6_cork_release.isra.1+0x64/0x90 [ipv6] ? __ip6_make_skb+0x38d/0x680 [ipv6] ? ip6_output+0x6c/0x140 [ipv6] ip6_output+0x6c/0x140 [ipv6] ip6_send_skb+0x1e/0x60 [ipv6] rawv6_sendmsg+0xc4b/0xe10 [ipv6] ? proc_put_long+0xd0/0xd0 ? rw_copy_check_uvector+0x4e/0x110 ? sock_sendmsg+0x36/0x40 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x2b6/0x2d0 ? proc_dointvec+0x23/0x30 ? addrconf_sysctl_forward+0x8d/0x250 [ipv6] ? dev_forward_change+0x130/0x130 [ipv6] ? _raw_spin_unlock+0x12/0x30 ? proc_sys_call_handler.isra.14+0x9f/0x110 ? __call_rcu+0x213/0x510 ? get_max_files+0x10/0x10 ? trace_hardirqs_on+0x2c/0xe0 ? __sys_sendmsg+0x63/0xa0 __sys_sendmsg+0x63/0xa0 do_syscall_64+0x6c/0x1e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum_router: Allow programming link-local prefix routesIdo Schimmel1-2/+4
The device has a trap for IPv6 packets that need be routed and have a unicast link-local destination IP (i.e., fe80::/10). This allows mlxsw to ignore link-local routes, as the packets will be trapped to the CPU in any case. However, since link-local routes are not programmed, it is possible for routed packets to hit the default route which might also be programmed to trap packets. This means that packets with a link-local destination IP might be trapped for the wrong reason. To overcome this, allow programming link-local prefix routes (usually one fe80::/64 per-table), so that the packets will be forwarded until reaching the link-local trap. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum: Add packet traps for BFD packetsIdo Schimmel3-0/+10
Bidirectional Forwarding Detection (BFD) provides "low-overhead, short-duration detection of failures in the path between adjacent forwarding engines" (RFC 5880). This is accomplished by exchanging BFD packets between the two forwarding engines. Up until now these packets were trapped via the general local delivery (i.e., IP2ME) trap which also traps a lot of other packets that are not as time-sensitive as BFD packets. Expose dedicated traps for BFD packets so that user space could configure a dedicated policer for them. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum: Treat IPv6 link-local SIP as an exceptionIdo Schimmel1-1/+1
IPv6 packets that need to be forwarded and have a link-local source IP are dropped by the kernel and an ICMPv6 "Destination unreachable" is sent to the sending host. As such, change the trap group of such packets so that they do not interfere with IPv6 management packets. In the future this trap will be exposed as an exception via devlink-trap. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum: Share one group for all locally delivered packetsIdo Schimmel1-2/+2
Routed IP packets with the Router Alert option need to be trapped to the CPU as they might need to be locally delivered to raw sockets with the IP_ROUTER_ALERT / IPV6_ROUTER_ALERT socket option. Move them to the same group with other packets that might need to be trapped following route lookup. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: reg: Move all trap groups under the same enumIdo Schimmel1-7/+3
After the previous patch the split is no longer necessary and all the trap groups can be moved under the same enum. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum_trap: Do not hard code "thin" policer identifierIdo Schimmel2-6/+13
As explained in commit e612523041ab ("mlxsw: spectrum_trap: Introduce dummy group with thin policer"), the purpose of the "thin" policer is to pass as less packets as possible to the CPU. The identifier of this policer is currently set according to the maximum number of used trap groups, but this is fragile: On Spectrum-1 the maximum number of policers is less than the maximum number of trap groups, which might result in an invalid policer identifier in case the number of used trap groups grows beyond the policer limit. Solve this by dynamically allocating the policer identifier. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: switchx2: Move SwitchX-2 trap groups out of main enumIdo Schimmel2-2/+5
The number of Spectrum trap groups is not infinite, but two identifiers are occupied by SwitchX-2 specific trap groups. Free these identifiers by moving them out of the main enum. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum: Reduce priority of locally delivered packetsIdo Schimmel1-1/+1
To align with recent recommended values. Will be configurable by future patches. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum: Use same trap group for local routes and link-local destinationIdo Schimmel1-1/+1
Packets with an IPv6 link-local destination (i.e., fe80::/10) should not be forwarded and are therefore trapped to the CPU for local delivery. Since these packets are trapped for the same logical reason as packets hitting local routes, associate both traps with the same group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum: Use separate trap group for FID missIdo Schimmel2-1/+4
When a packet enters the device it is classified to a filtering identifier (FID) based on the ingress port and VLAN. The FID miss trap is used to trap packets for which a FID could not be found. In mlxsw this trap should only be triggered when a port is enslaved to an OVS bridge and a matching ACL rule could not be found, so as to trigger learning. These packets are therefore completely unrelated to packets hitting local routes and should be in a different group. Move them. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum: Use same trap group for various IPv6 packetsIdo Schimmel1-3/+3
Group these various IPv6 packets (e.g., router solicitations, router advertisement) together and subject them to the same policer. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum: Rename IPv6 ND trap groupIdo Schimmel2-6/+6
The IPv6 Neighbour Discovery (ND) group will be used for various IPv6 packets, not all of which fall under the definition of ND, so rename it to "IPV6" which is more appropriate. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum: Use same switch case for identical groupsIdo Schimmel1-3/+0
Trap groups that use the same policer settings can share the same switch case. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum: Use dedicated trap group for ACL trapIdo Schimmel2-1/+4
Packets that are trapped via tc's trap action are currently subject to the same policer as packets hitting local routes. The latter are critical to the correct functioning of the control plane, while the former are mainly used for traffic inspection. Split the ACL trap to a separate group with its own policer. Use a higher priority for these traps than for traps using mirror action (e.g., ARP, IGMP). Otherwise, packets matching both traps will not be forwarded in hardware (because of trap action) and also not forwarded in software because they will be marked with 'offload_fwd_mark'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27bnxt_en: fix firmware message length endiannessEdwin Peer2-15/+4
The explicit mask and shift is not the appropriate way to parse fields out of a little endian struct. The length field is internally __le16 and the strategy employed only happens to work on little endian machines because the offset used is actually incorrect (length is at offset 6). Also remove the related and no longer used definitions from bnxt.h. Fixes: 845adfe40c2a ("bnxt_en: Improve valid bit checking in firmware response message.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27bnxt_en: Fix return code to "flash_device".Vasundhara Volam1-4/+5
When NVRAM directory is not found, return the error code properly as per firmware command failure instead of the hardcode -ENOBUFS. Fixes: 3a707bed13b7 ("bnxt_en: Return -EAGAIN if fw command returns BUSY") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27bnxt_en: Fix accumulation of bp->net_stats_prev.Michael Chan1-1/+1
We have logic to maintain network counters across resets by storing the counters in bp->net_stats_prev before reset. But not all resets will clear the counters. Certain resets that don't need to change the number of rings do not clear the counters. The current logic accumulates the counters before all resets, causing big jumps in the counters after some resets, such as ethtool -G. Fix it by only accumulating the counters during reset if the irq_re_init parameter is set. The parameter signifies that all rings and interrupts will be reset and that means that the counters will also be reset. Reported-by: Vijayendra Suman <vijayendra.suman@oracle.com> Fixes: b8875ca356f1 ("bnxt_en: Save ring statistics before reset.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: usb: qmi_wwan: add Telit LE910C1-EUX compositionDaniele Palmas1-0/+1
Add support for Telit LE910C1-EUX composition 0x1031: tty, tty, tty, rmnet Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27r8169: improve rtl_remove_oneHeiner Kallweit1-7/+5
Don't call netif_napi_del() manually, free_netdev() does this for us. In addition reorder calls to match reverse order of calls in probe(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: ethernet: fec: move GPR register offset and bit into DTFugang Duan1-12/+12
The commit da722186f654 (net: fec: set GPR bit on suspend by DT configuration) set the GPR reigster offset and bit in driver for wake on lan feature. But it introduces two issues here: - one SOC has two instances, they have different bit - different SOCs may have different offset and bit So to support wake-on-lan feature on other i.MX platforms, it should configure the GPR reigster offset and bit from DT. So the patch is to improve the commit da722186f654 (net: fec: set GPR bit on suspend by DT configuration) to support multiple ethernet instances on i.MX series. v2: * switch back to store the quirks bitmask in driver_data v3: * suggested by Sascha Hauer, use a struct fec_devinfo for abstracting differences between different hardware variants, it can give more freedom to describe the differences. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27Merge tag 'mac80211-next-for-net-next-2020-04-25' of ↵David S. Miller8-81/+143
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== One batch of changes, containing: * hwsim improvements from Jouni and myself, to be able to test more scenarios easily * some more HE (802.11ax) support * some initial S1G (sub 1 GHz) work for fractional MHz channels * some (action) frame registration updates to help DPP support * along with other various improvements/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10aFugang Duan1-1/+2
For rx filter 'HWTSTAMP_FILTER_PTP_V2_EVENT', it should be PTP v2/802.AS1, any layer, any kind of event packet, but HW only take timestamp snapshot for below PTP message: sync, Pdelay_req, Pdelay_resp. Then it causes below issue when test E2E case: ptp4l[2479.534]: port 1: received DELAY_REQ without timestamp ptp4l[2481.423]: port 1: received DELAY_REQ without timestamp ptp4l[2481.758]: port 1: received DELAY_REQ without timestamp ptp4l[2483.524]: port 1: received DELAY_REQ without timestamp ptp4l[2484.233]: port 1: received DELAY_REQ without timestamp ptp4l[2485.750]: port 1: received DELAY_REQ without timestamp ptp4l[2486.888]: port 1: received DELAY_REQ without timestamp ptp4l[2487.265]: port 1: received DELAY_REQ without timestamp ptp4l[2487.316]: port 1: received DELAY_REQ without timestamp Timestamp snapshot dependency on register bits in received path: SNAPTYPSEL TSMSTRENA TSEVNTENA PTP_Messages 01 x 0 SYNC, Follow_Up, Delay_Req, Delay_Resp, Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up 01 0 1 SYNC, Pdelay_Req, Pdelay_Resp For dwmac v5.10a, enabling all events by setting register DWC_EQOS_TIME_STAMPING[SNAPTYPSEL] to 2’b01, clearing bit [TSEVNTENA] to 0’b0, which can support all required events. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: phy: mscc-miim: read poll when high resolution timers are disabledAntoine Tenart2-6/+19
The driver uses a read polling mechanism to check the status of the MDIO bus, to know if it is ready to accept next commands. This polling mechanism uses usleep_delay() under the hood between reads which is fine as long as high resolution timers are enabled. Otherwise the delays will end up to be much longer than expected. This patch fixes this by using udelay() under the hood when CONFIG_HIGH_RES_TIMERS isn't enabled. This increases CPU usage. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: phy: mscc-miim: improve waiting logicAntoine Tenart1-2/+13
The MSCC MIIM MDIO driver uses a waiting logic to wait for the MDIO bus to be ready to accept next commands. It does so by polling the BUSY status bit which indicates the MDIO bus has completed all pending operations. This can take time, and the controller supports writing the next command as soon as there are no pending commands (which happens while the MDIO bus is busy completing its current command). This patch implements this improved logic by adding an helper to poll the PENDING status bit, and by adjusting where we should wait for the bus to not be busy or to not be pending. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: phy: mscc-miim: remove redundant timeout checkAntoine Tenart1-6/+2
readl_poll_timeout already returns -ETIMEDOUT if the condition isn't satisfied, there's no need to check again the condition after calling it. Remove the redundant timeout check. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: phy: mscc-miim: use more reasonable delaysAntoine Tenart1-1/+1
The MSCC MIIM MDIO driver uses delays to read poll a status register. I made multiple tests on a Ocelot PCS120 platform which led me to reduce those delays. The delay in between which the polling function is allowed to sleep is reduced from 100us to 50us which in almost all cases is a good value to succeed at the first retry. The overall delay is also lowered as the prior value was really way to high, 10000us is large enough. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27net: mdiobus: add clause 45 mdiobus accessorsRussell King6-30/+21
There is a recurring pattern throughout some of the PHY code converting a devad and regnum to our packed clause 45 representation. Rather than having this scattered around the code, let's put a common translation function in mdio.h, and provide some register accessors. Convert the phylib core, phylink, bcm87xx and cortina to use these. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27flow_dissector: Parse multiple MPLS Label Stack EntriesGuillaume Nault2-19/+50
The current MPLS dissector only parses the first MPLS Label Stack Entry (second LSE can be parsed too, but only to set a key_id). This patch adds the possibility to parse several LSEs by making __skb_flow_dissect_mpls() return FLOW_DISSECT_RET_PROTO_AGAIN as long as the Bottom Of Stack bit hasn't been seen, up to a maximum of FLOW_DIS_MPLS_MAX entries. FLOW_DIS_MPLS_MAX is arbitrarily set to 7. This should be enough for many practical purposes, without wasting too much space. To record the parsed values, flow_dissector_key_mpls is modified to store an array of stack entries, instead of just the values of the first one. A bit field, "used_lses", is also added to keep track of the LSEs that have been set. The objective is to avoid defining a new FLOW_DISSECTOR_KEY_MPLS_XX for each level of the MPLS stack. TC flower is adapted for the new struct flow_dissector_key_mpls layout. Matching on several MPLS Label Stack Entries will be added in the next patch. The NFP and MLX5 drivers are also adapted: nfp_flower_compile_mac() and mlx5's parse_tunnel() now verify that the rule only uses the first LSE and fail if it doesn't. Finally, the behaviour of the FLOW_DISSECTOR_KEY_MPLS_ENTROPY key is slightly modified. Instead of recording the first Entropy Label, it now records the last one. This shouldn't have any consequences since there doesn't seem to have any user of FLOW_DISSECTOR_KEY_MPLS_ENTROPY in the tree. We'd probably better do a hash of all parsed MPLS labels instead (excluding reserved labels) anyway. That'd give better entropy and would probably also simplify the code. But that's not the purpose of this patch, so I'm keeping that as a future possible improvement. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27qed: Add EDPM mode type for user-fw compatibilityYuval Basson3-0/+5
In older FW versions the completion flag was treated as the ack flag in edpm messages. Expose the FW option of setting which mode the QP is in by adding a flag to the qedr <-> qed API. Flag is added for backward compatibility with libqedr. This flag will be set by qedr after determining whether the libqedr is using the updated version. Fixes: f10939403352 ("qed: Add support for QP verbs") Signed-off-by: Yuval Basson <yuval.bason@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26r8169: sync RTL8168f/RTL8411 hw config with vendor driverHeiner Kallweit1-3/+3
Sync hw config for RTL8168f/RTL8411 with r8168 vendor driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26r8169: sync RTL8168evl hw config with vendor driverHeiner Kallweit1-3/+5
Sync hw config for RTL8168evl with r8168 vendor driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26r8169: sync RTL8168h hw config with vendor driverHeiner Kallweit1-2/+1
Sync hw config for RTL8168h with r8168 vendor driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26r8169: sync RTL8168g hw config with vendor driverHeiner Kallweit1-0/+1
Sync hw config for RTL8168g with r8168 vendor driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26Merge tag 'wireless-drivers-next-2020-05-25' of ↵David S. Miller158-1911/+17360
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.8 Second set of patches for v5.8. Lots of new features and new supported hardware for mt76. Also rtw88 got new hardware support. Major changes: rtw88 * add support for Realtek 8723DE PCI adapter * rename rtw88.ko/rtwpci.ko to rtw88_core.ko/rtw88_pci.ko iwlwifi * stop supporting swcrypto and bt_coex_active module parameters on mvm devices * enable A-AMSDU in low latency mt76 * new devices for mt76x0/mt76x2 * support for non-offload firmware on mt7663 * hw/sched scan support for mt7663 * mt7615/mt7663 MSI support * TDLS support * mt7603/mt7615 rate control fixes * new driver for mt7915 * wowlan support for mt7663 * suspend/resume support for mt7663 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26qlcnic: fix missing release in qlcnic_83xx_interrupt_test.Qiushi Wu1-1/+3
In function qlcnic_83xx_interrupt_test(), function qlcnic_83xx_diag_alloc_res() is not handled by function qlcnic_83xx_diag_free_res() after a call of the function qlcnic_alloc_mbx_args() failed. Fix this issue by adding a jump target "fail_mbx_args", and jump to this new target when qlcnic_alloc_mbx_args() failed. Fixes: b6b4316c8b2f ("qlcnic: Handle qlcnic_alloc_mbx_args() failure") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26drivers: ipa: print dev_err info accuratelyWang Wenhu1-2/+2
Print certain name string instead of hard-coded "memory" for dev_err output, which would be more accurate and helpful for debugging. Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Cc: Alex Elder <elder@kernel.org> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26dpaa_eth: fix usage as DSA master, try 3Vladimir Oltean1-1/+1
The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver. All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports. It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion. Actually there have already been at least 2 previous attempts to make this work: - Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node") - One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA": https://patchwork.ozlabs.org/project/netdev/cover/1508178970-28945-1-git-send-email-madalin.bucur@nxp.com/ (I couldn't really figure out which one was supposed to solve the problem and how). Point being, it looks like this is still pretty much a problem today. On T1040, the /sys/class/net/eth0 symlink currently points to ../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpaa-ethernet.0/net/eth0 which pretty much illustrates the problem. The closest of_node we've got is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000, which is what we'd like to be able to reference from DSA as host port. For of_find_net_device_by_node to find the eth0 port, we would need the parent of the eth0 net_device to not be the "dpaa-ethernet" platform device, but to point 1 level higher, aka the "fsl,fman-memac" node directly. The new sysfs path would look like this: ../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net/eth0 And this is exactly what SET_NETDEV_DEV does. It sets the parent of the net_device. The new parent has an of_node associated with it, and of_dev_node_match already checks for the of_node of the device or of its parent. Fixes: a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node") Fixes: c6e26ea8c893 ("dpaa_eth: change device used") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26bnx2x: allow bnx2x_bsc_read() to scheduleEric Dumazet1-11/+15
bnx2x_warpcore_read_sfp_module_eeprom() can call bnx2x_bsc_read() three times before giving up. This causes latency blips of at least 31 ms (58 ms being reported by our teams) Convert the long lasting loops of udelay() to usleep_range() ones, and breaks the loops on precise time tracking. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ariel Elior <aelior@marvell.com> Cc: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26mvneta: MVNETA_SKB_HEADROOM set last 3 bits to zeroSven Auhagen1-1/+2
For XDP the MVNETA_SKB_HEADROOM is used as an offset for the received data. The MVNETA manual states that the last 3 bits assumed to be 0. This is currently the case but lets make it explicit in the definition to prevent future problems. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25vxlan: Do not assume RTNL is held in vxlan_fdb_info()Ido Schimmel1-3/+12
vxlan_fdb_info() is not always called with RTNL held or from an RCU read-side critical section. For example, in the following call path: vxlan_cleanup() vxlan_fdb_destroy() vxlan_fdb_notify() __vxlan_fdb_notify() vxlan_fdb_info() The use of rtnl_dereference() can therefore result in the following splat [1]. Fix this by dereferencing the nexthop under RCU read-side critical section. [1] [May24 22:56] ============================= [ +0.004676] WARNING: suspicious RCU usage [ +0.004614] 5.7.0-rc5-custom-16219-g201392003491 #2772 Not tainted [ +0.007116] ----------------------------- [ +0.004657] drivers/net/vxlan.c:276 suspicious rcu_dereference_check() usage! [ +0.008164] other info that might help us debug this: [ +0.009126] rcu_scheduler_active = 2, debug_locks = 1 [ +0.007504] 5 locks held by bash/6892: [ +0.004392] #0: ffff8881d47e3410 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: __do_execve_file.isra.27+0x392/0x23c0 [ +0.011795] #1: ffff8881d47e34b0 (&sig->exec_update_mutex){+.+.}-{3:3}, at: flush_old_exec+0x510/0x2030 [ +0.010947] #2: ffff8881a141b0b0 (ptlock_ptr(page)#2){+.+.}-{2:2}, at: unmap_page_range+0x9c0/0x2590 [ +0.010585] #3: ffff888230009d50 ((&vxlan->age_timer)){+.-.}-{0:0}, at: call_timer_fn+0xe8/0x800 [ +0.010192] #4: ffff888183729bc8 (&vxlan->hash_lock[h]){+.-.}-{2:2}, at: vxlan_cleanup+0x133/0x4a0 [ +0.010382] stack backtrace: [ +0.005103] CPU: 1 PID: 6892 Comm: bash Not tainted 5.7.0-rc5-custom-16219-g201392003491 #2772 [ +0.009675] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ +0.010155] Call Trace: [ +0.002775] <IRQ> [ +0.002313] dump_stack+0xfd/0x178 [ +0.003895] lockdep_rcu_suspicious+0x14a/0x153 [ +0.005157] vxlan_fdb_info+0xe39/0x12a0 [ +0.004775] __vxlan_fdb_notify+0xb8/0x160 [ +0.004672] vxlan_fdb_notify+0x8e/0xe0 [ +0.004370] vxlan_fdb_destroy+0x117/0x330 [ +0.004662] vxlan_cleanup+0x1aa/0x4a0 [ +0.004329] call_timer_fn+0x1c4/0x800 [ +0.004357] run_timer_softirq+0x129d/0x17e0 [ +0.004762] __do_softirq+0x24c/0xaef [ +0.004232] irq_exit+0x167/0x190 [ +0.003767] smp_apic_timer_interrupt+0x1dd/0x6a0 [ +0.005340] apic_timer_interrupt+0xf/0x20 [ +0.004620] </IRQ> Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25mlxsw: spectrum: Fix spelling mistake in trap's nameIdo Schimmel2-4/+4
Fix incorrect spelling of "advertisement". Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25mlxsw: spectrum: Use dedicated trap group for sampled packetsIdo Schimmel2-1/+3
The rate with which packets are sampled is determined by user space, so there is no need to associate such packets with a policer. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25mlxsw: spectrum: Use same trap group for IPv6 ND and ARP packetsIdo Schimmel1-4/+4
Both packet types are needed for the same reason (neighbour discovery), so associate them with the same trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25mlxsw: spectrum: Rename ARP trap groupIdo Schimmel2-7/+8
The ARP trap group will be used for IPv6 ND traps in the next patch, so rename it to "NEIGH_DISCOVERY" which is more appropriate. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25mlxsw: spectrum_trap: Remove unnecessary fieldIdo Schimmel1-6/+1
Now that traffic class (TC) and priority are set to the same value, there is no need to store both. Remove the first. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25mlxsw: spectrum: Align TC and trap priorityIdo Schimmel2-5/+5
The traffic class (TC) attribute of packet traps determines through which TC a packet trap will be scheduled through the CPU port. The priority attribute determines which trap will be triggered in case several packet traps match a packet. We try to configure these attributes to the same value for all packet traps as there is little reason not to. Some packet traps did not use the same value, so rectify that now. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25mlxsw: spectrum_buffers: Assign non-zero quotas to TC 0 of the CPU portIdo Schimmel1-1/+1
As explained in commit 9ffcc3725f09 ("mlxsw: spectrum: Allow packets to be trapped from any PG"), incoming packets can be admitted to the shared buffer and forwarded / trapped, if: (Ingress{Port}.Usage < Thres && Ingress{Port,PG}.Usage < Thres && Egress{Port}.Usage < Thres && Egress{Port,TC}.Usage < Thres) || (Ingress{Port}.Usage < Min || Ingress{Port,PG} < Min || Egress{Port}.Usage < Min || Egress{Port,TC}.Usage < Min) Trapped packets are scheduled to transmission through the CPU port. Currently, the minimum and maximum quotas of traffic class (TC) 0 of the CPU port are 0, which means it is not usable. Assign non-zero quotas to TC 0 of the CPU port, so that it could be utilized by subsequent patches. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25mlxsw: spectrum: Change default rate and priority of DHCP packetsIdo Schimmel1-2/+2
Reduce the default acceptable rate of DHCP packets to 128 packets per second and reduce their priority. This is reasonable given the Spectrum ASICs are limited to 128 ports at the moment. These are only the default values. Users will be able to modify them via devlink-trap. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 13:20:08 +0300