summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-06-16net: phy: fix space alignment issuesWenpeng Liang4-25/+25
There are some space related issues, including spaces at the start of the line, before tabs, after open parenthesis and before close parenthesis. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: delete repeated words of commentsWenpeng Liang2-2/+2
There are some repeated words in some comments, they should be deleted. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: correct format of block commentsWenpeng Liang5-9/+16
Block comments should not use a trailing */ on a separate line and every line of a block comment should start with an '*'. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: change format of some declarationsWenpeng Liang5-5/+9
Add a blank line after declarations, change the order of them and put the assignments and declarations together. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: qualcomm: rmnet: Remove some unneeded castsSubash Abhinov Kasiviswanathan1-6/+5
Remove the explicit casts in the checksum complement functions and pass the actual protocol specific headers instead. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: iosm: remove the repeated declaration and commentShaokun Zhang1-10/+0
Function 'ipc_mmio_get_cp_version' is declared twice, so remove the repeated declaration and wrong comments. Cc: M Chetan Kumar <m.chetan.kumar@intel.com> Cc: Intel Corporation <linuxwwan@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: dsa: xrs700x: forward HSR supervision framesGeorge McCollister1-8/+19
Forward supervision frames between redunant HSR ports. This was broken in the last commit. Fixes: 1a42624aecba ("net: dsa: xrs700x: allow HSR/PRP supervision dupes for node_table") Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: qualcomm: rmnet: Allow partial updates of IFLA_FLAGSBjorn Andersson1-2/+4
The idiomatic way to handle the changelink flags/mask pair seems to be allow partial updates of the driver's link flags. In contrast the rmnet driver masks the incoming flags and then use that as the new flags. Change the rmnet driver to follow the common scheme, before the introduction of IFLA_RMNET_FLAGS handling in iproute2 et al. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: stmmac: Fix error return code in ingenic_mac_probe()Wei Yongjun1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 2bb4b98b60d7 ("net: stmmac: Add Ingenic SoCs MAC support.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: chelsio: cxgb4: use eth_zero_addr() to assign zero addressYang Yingliang1-2/+1
Using eth_zero_addr() to assign zero address insetad of inefficient copy from an array. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: remove redundant spacesPeng Li1-5/+5
According to the chackpatch.pl, no spaces is necessary at the start of a line, no space is necessary after a cast. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: remove trailing whitespacesPeng Li1-13/+13
This patch removes trailing whitespaces. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: add some required spacesPeng Li1-68/+69
Add space required before the open parenthesis '(' and '{'. Add space required after that close brace '}' and ',' Add spaces required around that '=' , '&', '*', '|', '+', '/' and '-'. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: fix the code style issue about trailing statementsPeng Li1-42/+79
Trailing statements should be on next line. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: fix the alignment issuePeng Li1-10/+12
Alignment should match open parenthesis. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: use BIT macroPeng Li1-3/+3
This patch uses the BIT macro for setting individual bits, to fix the following checkpatch.pl issue: CHECK: Prefer using the BIT macro. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: add necessary () to macro argumentPeng Li1-8/+8
Macro argument 'cosa' may be better as '(cosa)' to avoid precedence issues. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: remove redundant braces {}Peng Li1-3/+3
This patch removes redundant braces {}, to fix the checkpatch.pl warning: "braces {} are not necessary for single statement blocks". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: add braces {} to all arms of the statementPeng Li1-3/+3
Braces {} should be used on all arms of this statement. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: fix the comments style issuePeng Li1-56/+33
Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: move out assignment in if conditionPeng Li1-10/+15
Should not use assignment in if condition. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: replace comparison to NULL with "!chan->rx_skb"Peng Li1-3/+3
According to the chackpatch.pl, comparison to NULL could be written "!chan->rx_skb". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: fix the code style issue about "foo* bar"Peng Li1-1/+1
Fix the checkpatch error as "foo* bar" should be "foo *bar". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: add blank line after declarationsPeng Li1-0/+15
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: cosa: remove redundant blank linesPeng Li1-10/+0
This patch removes some redundant blank lines. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: iosm: add missing MODULE_DEVICE_TABLEZou Wei1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16qlcnic: Use list_for_each_entry() to simplify code in qlcnic_main.cWang Hai1-3/+1
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: mhi_net: make mhi_wwan_ops staticJiapeng Chong1-1/+1
This symbol is not used outside of net.c, so marks it static. Fix the following sparse warning: drivers/net/mhi/net.c:385:23: warning: symbol 'mhi_wwan_ops' was not declared. Should it be static? Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: hns3: use bounce buffer when rx page can not be reusedYunsheng Lin4-0/+41
Currently rx page will be reused to receive future packet when the stack releases the previous skb quickly. If the old page can not be reused, a new page will be allocated and mapped, which comsumes a lot of cpu when IOMMU is in the strict mode, especially when the application and irq/NAPI happens to run on the same cpu. So allocate a new frag to memcpy the data to avoid the costly IOMMU unmapping/mapping operation, and add "frag_alloc_err" and "frag_alloc" stats in "ethtool -S ethX" cmd. The throughput improves above 50% when running single thread of iperf using TCP when IOMMU is in strict mode and iperf shares the same cpu with irq/NAPI(rx_copybreak = 2048 and mtu = 1500). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: hns3: optimize the rx page reuse handling processYunsheng Lin1-22/+22
Current rx page offset only reset to zero when all the below conditions are satisfied: 1. rx page is only owned by driver. 2. rx page is reusable. 3. the page offset that is above to be given to the stack has reached the end of the page. If the page offset is over the hns3_buf_size(), it means the buffer below the offset of the page is usable when the above condition 1 & 2 are satisfied, so page offset can be reset to zero instead of increasing the offset. We may be able to always reuse the first 4K buffer of a 64K page, which means we can limit the hot buffer size as much as possible. The above optimization is a side effect when refacting the rx page reuse handling in order to support the rx copybreak. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: hns3: support dma_map_sg() for multi frags skbYunsheng Lin3-5/+113
Using the queue based tx buffer, it is also possible to allocate a sgl buffer, and use skb_to_sgvec() to convert the skb to the sgvec in order to support the dma_map_sg() to decreases the overhead of IOMMU mapping and unmapping. Firstly, it reduces the number of buffers. For example, a tcp skb may have a 66-byte header and 3 fragments of 4328, 32768, and 28064 bytes. With this patch, dma_map_sg() will combine them into two buffers, 66-bytes header and one 65160-bytes fragment by using IOMMU. Secondly, it reduces the number of dma mapping and unmapping. All the original 4 buffers are mapped only once rather than 4 times. The throughput improves above 10% when running single thread of iperf using TCP when IOMMU is in strict mode. Suggested-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: hns3: add support to query tx spare buffer size for pfHuazhong Tan5-2/+24
Add support to query tx spare buffer size from configuration file, and use this info to do spare buffer initialization when the module parameter 'tx_spare_buf_size' is not specified. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: hns3: use tx bounce buffer for small packetsYunsheng Lin4-15/+420
when the packet or frag size is small, it causes both security and performance issue. As dma can't map sub-page, this means some extra kernel data is visible to devices. On the other hand, the overhead of dma map and unmap is huge when IOMMU is on. So add a queue based tx shared bounce buffer to memcpy the small packet when the len of the xmitted skb is below tx_copybreak. Add tx_spare_buf_size module param to set the size of tx spare buffer, and add set/get_tunable to set or query the tx_copybreak. The throughtput improves from 30 Gbps to 90+ Gbps when running 16 netperf threads with 32KB UDP message size when IOMMU is in the strict mode(tx_copybreak = 2000 and mtu = 1500). Suggested-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: hns3: refactor for hns3_fill_desc() functionYunsheng Lin1-39/+48
Factor out hns3_fill_desc() so that it can be reused in the tx bounce supporting. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: hns3: minor refactor related to desc_cb handlingYunsheng Lin3-29/+25
desc_cb is used to store mapping and freeing info for the corresponding desc, which is used in the cleaning process. There will be more desc_cb type coming up when supporting the tx bounce buffer, change desc_cb type to bit-wise value in order to reduce the desc_cb type checking operation in the data path. Also move the desc_cb type definition to hns3_enet.h because it is only used in hns3_enet.c, and declare a local variable desc_cb in hns3_clear_desc() to reduce lines of code. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: ti: add pp skb recycling supportLorenzo Bianconi2-4/+4
As already done for mvneta and mvpp2, enable skb recycling for ti ethernet drivers ti driver on net-next: ---------------------- [perf top] 47.15% [kernel] [k] _raw_spin_unlock_irqrestore 11.77% [kernel] [k] __cpdma_chan_free 3.16% [kernel] [k] ___bpf_prog_run 2.52% [kernel] [k] cpsw_rx_vlan_encap 2.34% [kernel] [k] __netif_receive_skb_core 2.27% [kernel] [k] free_unref_page 2.26% [kernel] [k] kmem_cache_free 2.24% [kernel] [k] kmem_cache_alloc 1.69% [kernel] [k] __softirqentry_text_start 1.61% [kernel] [k] cpsw_rx_handler 1.19% [kernel] [k] page_pool_release_page 1.19% [kernel] [k] clear_bits_ll 1.15% [kernel] [k] page_frag_free 1.06% [kernel] [k] __dma_page_dev_to_cpu 0.99% [kernel] [k] memset 0.94% [kernel] [k] __alloc_pages_bulk 0.92% [kernel] [k] kfree_skb 0.85% [kernel] [k] packet_rcv 0.78% [kernel] [k] page_address 0.75% [kernel] [k] v7_dma_inv_range 0.71% [kernel] [k] __lock_text_start [iperf3 tcp] [ 5] 0.00-10.00 sec 873 MBytes 732 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 866 MBytes 726 Mbits/sec receiver ti + skb recycling: ------------------- [perf top] 40.58% [kernel] [k] _raw_spin_unlock_irqrestore 16.18% [kernel] [k] __softirqentry_text_start 10.33% [kernel] [k] __cpdma_chan_free 2.62% [kernel] [k] ___bpf_prog_run 2.05% [kernel] [k] cpsw_rx_vlan_encap 2.00% [kernel] [k] kmem_cache_alloc 1.86% [kernel] [k] __netif_receive_skb_core 1.80% [kernel] [k] kmem_cache_free 1.63% [kernel] [k] cpsw_rx_handler 1.12% [kernel] [k] cpsw_rx_mq_poll 1.11% [kernel] [k] page_pool_put_page 1.04% [kernel] [k] _raw_spin_unlock 0.97% [kernel] [k] clear_bits_ll 0.90% [kernel] [k] packet_rcv 0.88% [kernel] [k] __dma_page_dev_to_cpu 0.85% [kernel] [k] kfree_skb 0.80% [kernel] [k] memset 0.71% [kernel] [k] __lock_text_start 0.66% [kernel] [k] v7_dma_inv_range 0.64% [kernel] [k] gen_pool_free_owner [iperf3 tcp] [ 5] 0.00-10.00 sec 884 MBytes 742 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 878 MBytes 735 Mbits/sec receiver Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15octeontx2-pf: Fix spelling mistake "morethan" -> "more than"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: dsa: b53: remove redundant null check on devColin Ian King1-2/+1
The pointer dev can never be null, the null check is redundant and can be removed. Cleans up a static analysis warning that pointer priv is dereferencing dev before dev is being null checked. Addresses-Coverity: ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: bonding: Use per-cpu rr_tx_counterJussi Maki1-3/+15
The round-robin rr_tx_counter was shared across CPUs leading to significant cache thrashing at high packet rates. This patch switches the round-robin packet counter to use a per-cpu variable to decide the destination slave. On a test with 2x100Gbit ICE nic with pktgen_sample_04_many_flows.sh (-s 64 -t 32) the tx rate was 19.6Mpps before and 22.3Mpps after this patch. "perf top -e cache_misses" before: 12.31% [bonding] [k] bond_xmit_roundrobin_slave_get 10.59% [sch_fq_codel] [k] fq_codel_dequeue 9.34% [kernel] [k] skb_release_data after: 15.42% [sch_fq_codel] [k] fq_codel_dequeue 10.06% [kernel] [k] __memset 9.12% [kernel] [k] skb_release_data Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15Merge tag 'mlx5-updates-2021-06-14' of ↵David S. Miller14-431/+785
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-06-14 1) Trivial Lag refactroing in preparation for upcomming Single FDB lag feature - First 3 patches 2) Scalable IRQ distriburion for Sub-functions A subfunction (SF) is a lightweight function that has a parent PCI function (PF) on which it is deployed. Currently, mlx5 subfunction is sharing the IRQs (MSI-X) with their parent PCI function. Before this series the PF allocates enough IRQs to cover all the cores in a system, Newly created SFs will re-use all the IRQs that the PF has allocated for itself. Hence, the more SFs are created, there are more EQs per IRQs. Therefore, whenever we handle an interrupt, we need to pull all SFs EQs and PF EQs instead of PF EQs without SFs on the system. This leads to a hard impact on the performance of SFs and PF. For example, on machine with: Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz with 56 cores. PCI Express 3 with BW of 126 Gb/s. ConnectX-5 Ex; EDR IB (100Gb/s) and 100GbE; dual-port QSFP28; PCIe4.0 x16. test case: iperf TX BW single CPU, affinity of app and IRQ are the same. PF only: no SFs on the system, 56 IRQs. SF (before), 250 SFs Sharing the same 56 IRQs . SF (now), 250 SFs + 255 avaiable IRQs for the NIC. (please see IRQ spread scheme below). application SF-IRQ channel BW(Gb/sec) interrupts/sec iperf TX affinity PF only cpu={0} cpu={0} cpu={0} 79 8200 SF (before) cpu={0} cpu={0} cpu={0} 51.3 (-35%) 9500 SF (now) cpu={0} cpu={0} cpu={0} 78 (-2%) 8200 command: $ taskset -c 0 iperf -c 11.1.1.1 -P 3 -i 6 -t 30 | grep SUM The different between the SF examples is that before this series we allocate num_cpus (56) IRQs, and all of them were shared among the PF and the SFs. And after this series, we allocate 255 IRQs, and we spread the SFs among the above IRQs. This have significantly decreased the load on each IRQ and the number of EQs per IRQ is down by 95% (251->11). In this patchset the solution proposed is to have a dedicated IRQ pool for SFs to use. the pool will allocate a large number of IRQs for SFs to grab from in order to minimize irq sharing between the different SFs. IRQs will not be requested from the OS until they are 1st requested by an SF consumer, and will be eventually released when the last SF consumer releases them. For the detailed IRQ spread and allocation scheme please see last patch: ("net/mlx5: Round-Robin EQs over IRQs") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15octeontx2-pf: Add police action for TC flowerSubbaraya Sundeep3-23/+178
Added police action for ingress TC flower hardware offload. With this rate limiting can be done per flow. Since rate limiting is tied to RQs in hardware the number of TC flower filters with action as police is limited to number of receive queues of the interface. Both bps and pps modes are supported. Examples to rate limit a flow: $ ethtool -K eth0 hw-tc-offload on $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 parent ffff: protocol ip \ flower ip_proto udp dst_port 80 action \ police rate 100Mbit burst 32Kbit $ tc filter add dev eth0 parent ffff: \ protocol ip flower dst_mac 5e:b2:34:ee:29:49 \ action police pkts_rate 5000 pkts_burst 2048 Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15octeontx2-pf: Use NL_SET_ERR_MSG_MOD for TCSubbaraya Sundeep1-12/+17
This patch modifies all netdev_err messages in tc code to NL_SET_ERR_MSG_MOD. NL_SET_ERR_MSG_MOD does not support format specifiers yet hence netdev_err messages with only strings are modified. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15octeontx2-pf: TC_MATCHALL ingress ratelimiting offloadSunil Goutham5-0/+423
Add TC_MATCHALL ingress ratelimiting offload support with POLICE action for entire traffic coming into the interface. Eg: To ratelimit ingress traffic to 100Mbps $ ethtool -K eth0 hw-tc-offload on $ tc qdisc add dev eth0 clsact $ tc filter add dev eth0 ingress matchall skip_sw \ action police rate 100Mbit burst 32Kbit To support this, a leaf level bandwidth profile is allocated and all RQs' contexts used by this interface are updated to point to it. And the leaf level bandwidth profile is configured with user specified rate and burst sizes. Co-developed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15octeontx2-af: cn10k: Debugfs support for bandwidth profilesSunil Goutham5-4/+187
Added support for dumping current resource status of bandwidth profiles and contexts of allocated profiles via debugfs. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15octeontx2-af: cn10k: Bandwidth profiles config supportSunil Goutham6-4/+757
CN10K silicons supports hierarchial ingress packet ratelimiting. There are 3 levels of profilers supported leaf, mid and top. Ratelimiting is done after packet forwarding decision is taken and a NIXLF's RQ is identified to DMA the packet. RQ's context points to a leaf bandwidth profile which can be configured to achieve desired ratelimit. This patch adds logic for management of these bandwidth profiles ie profile alloc, free, context update etc. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: pci200syn: fix the comments style issuePeng Li1-2/+1
Networking block comments don't use an empty /* line, use /* Comment... This patch fixes the comments style issues. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: pci200syn: add necessary () to macro argumentPeng Li1-1/+1
Macro argument 'card' may be better as '(card)' to avoid precedence issues. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: pci200syn: add some required spacesPeng Li1-8/+8
Add spaces required after that close brace '}'. Add spaces required before the open parenthesis '('. Add spaces required after that ','. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: pci200syn: replace comparison to NULL with "!card"Peng Li1-4/+2
According to the chackpatch.pl, comparison to NULL could be written "!card". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: pci200syn: add blank line after declarationsPeng Li1-1/+3
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-27 20:05:15 +0300