summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2012-01-30ath6kl: fix testmode when fw-2.bin or fw-3.bin is usedKalle Valo3-28/+51
Testmode (TCMD and ART) was not enabled when fw-2.bin or fw-3.bin files were available, fix that by fetching testmode file just after the board file but before rest of the firmware files are fetched. I also added testmode field to struct ath6kl and moved the module parameter to core.c. Now all module parameters are grouped in one place. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-30ath9k: use WARN_ON_ONCE in ath_rc_get_highest_rixJohn W. Linville1-1/+1
The device seems to survive the issue, so no need to flood the logs about it... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-28Merge branch 'master' of ↵David S. Miller1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-01-27mwl8k: Configuring correct MAC address in broadcast keyYogesh Ashok Powar1-1/+1
While configuring the broadcast key in the hardware, in multi-BSS environment, BSSes other than first were incorrectly configured with the MAC address of first BSS. Fixing it with correct MAC addresses. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27mwifiex: update BSS parameters in dump_station_info()Amitkumar Karwar3-0/+24
This enables user to check beacon interval, DTIM period, short slot time and short preamble information using "iw dev mlan0 link" command when station is in connected state. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27mwifiex: pass priv pointer instead of adapterAvinash Patil3-7/+5
Pass mwifiex_private pointer directly to wmm_add_buf_txqueue() instead of passing adapter and then deriving priv again in mwifiex_get_priv_by_id(). This reduces a 'for' loop in TX path. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27rt2800usb: remove PWR_PIN_CFG=0x3 during initStanislaw Gruszka1-2/+0
This seems to be only needed as workaround for hardware problem on PCI devices. Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27rt2800: zero MAC_SYS_CTRL bits during BBP and MAC resetStanislaw Gruszka2-2/+2
Zero all other bits than RESET_CSR and RESET_BBP when want to do the reset, that the vendor driver behaviour. Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27rt2800: disable DMA after firmware loadStanislaw Gruszka1-12/+9
We can receive frames just after firmware load with current code, so disable DMA just after firmware is loaded, not before. Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27rt2800usb: initialize H2M_INT_SRC registerStanislaw Gruszka1-0/+2
Ralink USB driver initialize H2M_INT_SRC to 0 after firmware load, and never touch this register later. It is not touched at all by Ralink PCI driver. Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27carl9170: allow users to lower output power levelChristian Lamparter5-35/+50
This patch implements a simple way of reducing the output power of the device by a configurable upper limit. Requested-by: Harshal Chhaya <harshal@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27mac80211: make CQM RSSI support per virtual interfaceJohannes Berg2-5/+5
Similar to the previous beacon filtering patch, make CQM RSSI support depend on the flags that the driver set for virtual interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-27mac80211: make beacon filtering per virtual interfaceJohannes Berg5-4/+8
Due to firmware limitations, we may not be able to support beacon filtering on all virtual interfaces. To allow this in mac80211, introduce per-interface driver capability flags that the driver sets when an interface is added. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-26xen-netfront: correct MAX_TX_TARGET calculation.Wei Liu1-1/+1
Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-25team: send only changed options/ports via netlinkJiri Pirko1-46/+90
This patch changes event message behaviour to send only updated records instead of whole list. This fixes bug on which userspace receives non-actual data in case multiple events occur in row. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-25net/hyperv: fix possible memory leak in do_set_multicast()Wei Yongjun1-2/+3
do_set_multicast() may not free the memory malloc in netvsc_set_multicast_list(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-25drivers/net: dsa/mv88e6xxx.c files need linux/module.hPaul Gortmaker4-0/+4
An implicit instance of module.h leaked back into existence and was masking the fact that these drivers weren't calling out the include for itself. Fix the drivers before we remove the implicit include path via net/netprio_cgroup.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-25stmmac: added PCI identifiersAlessandro Rubini1-3/+3
STM has a device ID within its own VENDOR space, and it is being used in the STA2X11 I/O Hub. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-25stmmac: fix phy naming inconsistencyAlessandro Rubini1-1/+1
After commit "db8857b stmmac: use an unique MDIO bus name" my device stopped being probed because two different names were being used in different places. This fixes the inconsistency. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Florian Fainelli <florian@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-25orinoco_usb: remove version definitionJohn W. Linville1-5/+0
Avoids this: CC [M] drivers/net/wireless/orinoco/orinoco_usb.o drivers/net/wireless/orinoco/orinoco_usb.c:1759:13: warning: ‘version’ defined but not used Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24ath5k: use bool type for no_hw_rfkill_switch module parameterJohn W. Linville1-1/+1
Avoids this: CC [M] drivers/net/wireless/ath/ath5k/base.o drivers/net/wireless/ath/ath5k/base.c: In function ‘__check_no_hw_rfkill_switch’: drivers/net/wireless/ath/ath5k/base.c:85:1: warning: return from incompatible pointer type Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: fix PCI-E transport "inta" raceJohannes Berg1-2/+2
When an interrupt comes in, we read the reason bits and collect them into "trans_pcie->inta". This happens with the spinlock held. However, there's a bug resetting this variable -- that happens after the spinlock has been released. This means that it is possible for interrupts to be missed if the reset happens after some other interrupt reasons were already added to the variable. I found this by code inspection, looking for a reason that we sometimes see random commands time out. It seems possible that this causes such behaviour, but I can't say for sure right now since it happens extremely infrequently on my test systems. Cc: stable@vger.kernel.org [3.2] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24ath9k_htc: claim support for IBSS RSNAntonio Quartulli2-0/+17
Skip group keys configuration in hardware in order to make IBSS RSN work. Keys will be managed using software. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcmfmac: Trivial typo of "couldn" to "could" fixJoe Perches1-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: Use pr_fmt and pr_<level>Joe Perches13-24/+46
Convert printks to pr_<level> Prefix logging with pr_fmt. Use ##__VA_ARGS__ in some WL_ logging macros. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: Use brcmu_dbg_hex_dumpJoe Perches1-6/+3
Convert a couple of pr_debug/print_hex_dump to the standard utility. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: Convert printk(KERN_DEBUG to pr_debugJoe Perches6-93/+78
Use pr_debug to allow dynamic debugging to work. Move an #endif to allow brcmf_dbg_hex_dump to be outside the #if/#endif block. Move a const char* declaration to be inside a pr_debug so the function doesn't need a #if/#endif block. Don't use temporaries in debugging functions so the code can be optimized away. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcmfmac: Remove useless #ifdef DEBUGJoe Perches1-2/+0
This doesn't do anything anymore. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: Add and use brcmX_dbg_dump_hexJoe Perches4-92/+84
Reduce the number of #ifdef DEBUG uses by adding a dbg_hex_dump routine which has the appropriate #ifdef DEBUG test. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcmfmac: Convert printk(KERN_DEBUG to pr_debugJoe Perches1-4/+4
Allow dynamic debugging. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: Use normal DEBUG defineJoe Perches16-102/+102
Current CONFIG_BRCMDBG flag when enabled does not necessarily enable proper pr_debug output when DEBUG is not also enabled. Remove BCMDBG define and just use DEBUG instead. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24ath5k: claim support for IBSS RSNAntonio Quartulli2-0/+11
Disable group keys programming when using IBSS RSN. Keys will be managed using software. In this way IBSS RSN can correctly work. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24carl9170: remove eeprom data injection optionChristian Lamparter3-38/+0
In the early days, this was a quite useful software feature for testing different regdomains and chain configurations without adding debugfs cruft into the driver. Nowadays, the driver's phy code seems to be stable and there's no need for it anymore. Therefore I decided to removed altogether. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mwifiex: derive priv from net_device instead of wiphyYogesh Ashok Powar1-11/+8
Currently mwifiex_private pointers are derived from wiphy structures. This will always work as long as there is only one net_device associated with one wiphy. In scenarios where there are multiple net_devices associated with single wiphy, one should use net_device to derive the priv. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24mwifiex: use bss_type and bss_num to retrieve privYogesh Ashok Powar12-34/+31
Current implementation, for retrieving priv from adapter, uses bss_index. In multi interface environment supporting different types, bss_index may not be unique. Use bss_type along with bss_num to retrieve the priv. bss_index is removed with this change. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24carl9170: claim to support IBSS RSN.Nicolas Cavallari1-0/+3
On carl9170, HW encryption is disabled on IBSS; the mac80211 software-based encryption is used instead. As mac80211 supports IBSS RSN (per-STA GTK), claim its support in the carl9170 PHY. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24drivers/net/wireless/mwifiex/scan.c: convert GFP_KERNEL to GFP_ATOMICJulia Lawall1-1/+1
The function is called with locks held and thus should not use GFP_KERNEL. The semantic patch that makes this report is available in scripts/coccinelle/locks/call_kern.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtl8192se: Update copyright datesLarry Finger20-20/+20
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtl8192de: Update copyright datesLarry Finger20-20/+20
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtl8192cu: Update copyright datesLarry Finger20-20/+20
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtl8192ce: Update copyright datesLarry Finger18-18/+18
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtl8192c_common: Update copyright datesLarry Finger7-7/+7
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: Update copyright datesLarry Finger21-21/+21
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtl8192cu: Remove dead code never selectedLarry Finger1-170/+0
The original driver contained some conditional code that was not selected, but was not deleted in case it would be used later. That code can now be removed. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24rtlwifi: rtl8192c_common: rtl8192de: Check for allocation failuresLarry Finger4-10/+20
In https://bugzilla.redhat.com/show_bug.cgi?id=771656, a kernel bug was triggered due to a failed skb allocation that was not checked. This event lead to an audit of all memory allocations in the complete rtlwifi family of drivers. This patch fixes the rest. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: update CopyrightWey-Yi Guy53-75/+75
Update Copyright to 2012 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: add testmode cmd IWL_TM_CMD_APP2DEV_GET_FW_INFOKenny Hsu2-3/+57
Add new testmode command IWL_TM_CMD_APP2DEV_GET_FW_INFO for reporting the following information of existing loaded uCode image. + uCode type + Instruction section size + Data section size Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: update error dump in testmode command sram_readKenny Hsu1-4/+4
The error message will be show up by using IWL_ERR insteads of IWl_DEBUG_INFO. Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: enhance testmode command sram_readKenny Hsu2-4/+6
This patch enables SRAM read function to support entire target memory. Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24iwlwifi: update testmode command of direct register accessKenny Hsu1-2/+2
In order to make sure the testcommand function of direct register access can be performed even NIC is asleep, replace corresponding handler iwl_read32 and iwl_write32 by using iwl_direct_read32 and iwl_direct_write32. Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 21:08:31 +0300