summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds755-34219/+85444
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits) bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL. vlan: Calling vlan_hwaccel_do_receive() is always valid. tproxy: use the interface primary IP address as a default value for --on-ip tproxy: added IPv6 support to the socket match cxgb3: function namespace cleanup tproxy: added IPv6 support to the TPROXY target tproxy: added IPv6 socket lookup function to nf_tproxy_core be2net: Changes to use only priority codes allowed by f/w tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled tproxy: added tproxy sockopt interface in the IPV6 layer tproxy: added udp6_lib_lookup function tproxy: added const specifiers to udp lookup functions tproxy: split off ipv6 defragmentation to a separate module l2tp: small cleanup nf_nat: restrict ICMP translation for embedded header can: mcp251x: fix generation of error frames can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set can-raw: add msg_flags to distinguish local traffic 9p: client code cleanup rds: make local functions/variables static ... Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and drivers/net/wireless/ath/ath9k/debug.c as per David
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds1-19/+16
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits) serial8250: ratelimit "too much work" error serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster serial: abstraction for 8250 legacy ports serial/imx: check that the buffer is non-empty before sending it out serial: mfd: add more baud rates support jsm: Remove the uart port on errors Alchemy: Add UART PM methods. 8250: allow platforms to override PM hook. altera_uart: Don't use plain integer as NULL pointer altera_uart: Fix missing prototype for registering an early console altera_uart: Fixup type usage of port flags altera_uart: Make it possible to use Altera UART and 8250 ports together altera_uart: Add support for different address strides altera_uart: Add support for getting mapbase and IRQ from resources altera_uart: Add support for polling mode (IRQ-less) serial: Factor out uart_poll_timeout() from 8250 driver serial: mark the 8250 driver as maintained serial: 8250: Don't delay after transmitter is ready. tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver vcs: invoke the vt update callback when /dev/vcs* is written to ...
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds20-26/+92
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-22Merge branch 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds1-0/+1
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: BKL: introduce CONFIG_BKL. dabusb: remove the BKL sunrpc: remove the big kernel lock init/main.c: remove BKL notations blktrace: remove the big kernel lock rtmutex-tester: make it build without BKL dvb-core: kill the big kernel lock dvb/bt8xx: kill the big kernel lock tlclk: remove big kernel lock fix rawctl compat ioctls breakage on amd64 and itanic uml: kill big kernel lock parisc: remove big kernel lock cris: autoconvert trivial BKL users alpha: kill big kernel lock isapnp: BKL removal s390/block: kill the big kernel lock hpet: kill BKL, add compat_ioctl
2010-10-22tty: Convert the USB drivers to the new icount interfaceAlan Cox1-19/+16
Simple pasting job using the new ops function. Also fix a couple of devices directly returning the internal struct (which happens at this point to match for the fields that matter but isn't correct or futureproof) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.Jesse Gross2-2/+2
Some cards don't support changing vlan offloading settings. Make Ethtool set_flags return -EINVAL in those cases. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-22Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+4
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits) arm: remove machine_desc.io_pg_offst and .phys_io arm: use addruart macro to establish debug mappings arm: return both physical and virtual addresses from addruart arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC ARM: make struct machine_desc definition coherent with its comment eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free cpuimx27: fix compile when ULPI is selected mach-pcm037_eet: fix compile errors Fixing ethernet driver compilation error for i.MX31 ADS board cpuimx51: update board support mx5: add cpuimx51sd module and its baseboard iomux-mx51: fix GPIO_1_xx 's IOMUX configuration imx-esdhc: update devices registration mx51: add resources for SD/MMC on i.MX51 iomux-mx51: fix SD1 and SD2's iomux configuration clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability clock-mx51: factorize clk_set_parent and clk_get_rate eukrea_mbimxsd: add support for DVI displays cpuimx25 & cpuimx35: fix OTG port registration in host mode i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472 ...
2010-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflagsLinus Torvalds2-0/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags: Fix IRQ flag handling naming MIPS: Add missing #inclusions of <linux/irq.h> smc91x: Add missing #inclusion of <linux/irq.h> Drop a couple of unnecessary asm/system.h inclusions SH: Add missing consts to sys_execve() declaration Blackfin: Rename IRQ flags handling functions Blackfin: Add missing dep to asm/irqflags.h Blackfin: Rename DES PC2() symbol to avoid collision Blackfin: Split the BF532 BFIN_*_FIO_FLAG() functions to their own header Blackfin: Split PLL code from mach-specific cdef headers
2010-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds20-1407/+308
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (22 commits) pcmcia: synclink_cs: fix information leak to userland pcmcia: don't call flush_scheduled_work() spuriously serial_cs: drop spurious flush_scheduled_work() call pcmcia/yenta: guide users in case of problems with O2-bridges pcmcia: fix unused function compile warning pcmcia: vrc4173_cardu: Fix error path for pci_release_regions and pci_disable_device pcmcia: add a few debug statements pcmcia: remove obsolete and wrong comments pcmcia: avoid messages on module (un)loading pcmcia: move driver name to struct pcmcia_driver pcmcia: remove the "Finally, report what we've done" message pcmcia: use autoconfiguration feature for ioports and iomem pcmcia: introduce autoconfiguration feature pcmcia: Documentation update pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device pcmcia: move config_{base,index,regs} to struct pcmcia_device pcmcia: simplify IntType pcmcia: simplify Status, ExtStatus register access pcmcia: remove Pin, Copy configuration register access pcmcia: move Vpp setup to struct pcmcia_device ...
2010-10-21Merge branch 'master' of ↵David S. Miller8-31/+56
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/core/dev.c
2010-10-21cxgb3: function namespace cleanupstephen hemminger7-289/+18
Make local functions static. Remove functions that are defined and never used. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21be2net: Changes to use only priority codes allowed by f/wSomnath Kotur4-10/+106
Changes to use one of the priority codes allowed by CNA f/w for NIC traffic from host. The driver gets the bit map of the priority codes allowed for host traffic through a asynchronous message from the f/w that the driver subscribes to. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21BKL: introduce CONFIG_BKL.Arnd Bergmann1-0/+1
With all the patches we have queued in the BKL removal tree, only a few dozen modules are left that actually rely on the BKL, and even there are lots of low-hanging fruit. We need to decide what to do about them, this patch illustrates one of the options: Every user of the BKL is marked as 'depends on BKL' in Kconfig, and the CONFIG_BKL becomes a user-visible option. If it gets disabled, no BKL using module can be built any more and the BKL code itself is compiled out. The one exception is file locking, which is practically always enabled and does a 'select BKL' instead. This effectively forces CONFIG_BKL to be enabled until we have solved the fs/lockd mess and can apply the patch that removes the BKL from fs/locks.c. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-21can: mcp251x: fix generation of error framesMarc Kleine-Budde1-1/+1
The function "mcp251x_error_skb" is used to generate error frames. They are identified by the "CAN_ERR_FLAG" in can_id. The function overwrites the can_id so that the frames show up as normal frames instead of error frames. This patch fixes the problem by or'ing the can_id instead of overwriting it. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Jargalan Nermunkh <jargalan.nermunkh@criticallink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is setMarc Kleine-Budde1-5/+9
Commit d3cd15657516141adce387810be8cb377baf020e introduced a bug, the interrupt handler would loop endlessly if the CANINTF_MERRF bit is set, because it's not cleared. This patch fixes the problem by masking out the CANINTF_MERRF and all other non interesting bits. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21drivers/net/ax88796.c: Return error code in failureJulia Lawall1-0/+1
In this code, 0 is returned on failure, even though other failures return -ENOMEM or other similar values. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @a@ identifier alloc; identifier ret; constant C; expression x; @@ x = alloc(...); if (x == NULL) { <+... \(ret = -C; \| return -C; \) ...+> } @@ identifier f, a.alloc; expression ret; expression x,e1,e2,e3; @@ ret = 0 ... when != ret = e1 *x = alloc(...) ... when != ret = e2 if (x == NULL) { ... when != ret = e3 return ret; } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21b44: fix resume, request_irq after hw resetJames Hogan1-5/+14
On resume, call request_irq() after resetting the hardware rather than before. It's a shared interrupt so the handler could be called immediately if another device on the same irq interrupts (and will be called immediately if CONFIG_DEBUG_SHIRQ=y), but unless the hardware is reinitialised with b44_init_hw() the read of the interrupt status register will hang the system. Signed-off-by: James Hogan <james@albanarts.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21cxgb4: function namespace cleanup (v3)stephen hemminger6-455/+3
Make functions only used in one file local. Remove lots of dead code, relating to unsupported functions in mainline driver like RSS, IPv6, and TCP offload. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21phy/marvell: fix 88e1121 supportArnaud Patard1-12/+19
Commit c477d0447db08068a497e7beb892b2b2a7bff64b added support for RGMII rx/tx delays except that it ends up clearing rx/tx delays bit for modes differents that RGMII*ID. Due to this, ethernet is not working anymore on my guruplug server +. This patch is fixing that. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21ixgbe: add a refcnt when turning on/off FCoE offload capabilityYi Zou2-0/+7
The FCoE offload is enabled/disabled per adapter, but upper FCoE protocol stack could have multiple FCoE instances created on the same physical network interface, e.g., FCoE on multiple VLAN interfaces on the same physical network interface. In this case we want to turn on FCoE offload at the first request from ndo_fcoe_enable() but only turn off FCoE offload at the very last call to ndo_fcoe_disable(). This is fixed by adding a refcnt in the per adapter FCoE structure and tear down FCoE offload when refcnt decrements to zero. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21ixgbe: fix stats handlingEric Dumazet3-16/+56
Current ixgbe stats have following problems : - Not 64 bit safe (on 32bit arches) - Not safe in ixgbe_clean_rx_irq() : All cpus dirty a common location (netdev->stats.rx_bytes & netdev->stats.rx_packets) without proper synchronization. This slow down a bit multiqueue operations, and possibly miss some updates. Fixes : Implement ndo_get_stats64() method to provide accurate 64bit rx|tx bytes/packets counters, using 64bit safe infrastructure. ixgbe_get_ethtool_stats() also use this infrastructure to provide 64bit safe counters. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21ixgbe: update copyright infoEmil Tantilov4-4/+4
Update copyright notice Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21jme: Advance version numberGuo-Fu Tseng2-1/+3
Advance version number and update copyright info Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21jme: Adding mii-tool supportGuo-Fu Tseng1-1/+33
Adding mii-tool support for some distribution only have mii-tool installed by default. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21jme: Prevent possible read re-order errorGuo-Fu Tseng1-0/+1
Adding read memory barrier in between flag reading and data reading of receive descriptors. This prevents the data being read before hardware complete writing informations. Reported-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21jme: Add comment in jme_set_settingsGuo-Fu Tseng1-3/+6
Explains what `fdc` variable is for. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21jme: Fix PHY power-off errorGuo-Fu Tseng1-4/+18
Adding phy_on in opposition to phy_off. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bonding: cleanup: remove braces from single block statementsBandan Das1-91/+72
checkpatch.pl cleanup : Remove braces from single statement blocks. Signed-off-by: Bandan Das <bandan.das@stratus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bonding: cleanup : add space around operatorsBandan Das1-44/+67
checkpatch.pl cleanup: Added spaces around operators at various places. Also fixed some c99 style comments that I came across. Signed-off-by: Bandan Das <bandan.das@stratus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21smsc95xx: generate random MAC address once, not every ifupBernard Blackham1-2/+2
The smsc95xx driver currently generates a new random MAC address every time the interface is brought up. This makes it impossible to override using the standard `ifconfig hw ether` approach. Past patches tried to make the MAC address a module parameter or base it off the die ID, but it seems to me much simpler (and hopefully less controversial) to stick with the current random generation scheme, but allow the user to change the address. This patch does exactly that - it moves the random address generation from smsc95xx_reset() into smsc95xx_bind(), so that it is done once on module load, not on every ifup. The user can then override this using the standard mechanisms. Applies against 2.6.35 and linux-2.6 head. Signed-off-by: Bernard Blackham <b-omap@largestprime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bnx2: Increase max rx ring size from 1K to 2KMichael Chan1-2/+2
A number of customers are reporting packet loss under certain workloads (e.g. heavy bursts of small packets) with flow control disabled. A larger rx ring helps to prevent these losses. No change in default rx ring size and memory consumption. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: John Feeney <jfeeney@redhat.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bonding: make release_and_destroy staticstephen hemminger2-3/+2
Only used in main file. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21pch_gbe: make local functions staticstephen hemminger3-15/+17
Make routines that are only used in one file static. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vmxnet3: make bit twiddle routines inlinestephen hemminger2-20/+14
Gcc doesn't usually handle inline across compilation units, and the functions don't have to be global in scope. Move the set/reset flag functions int the existing vmxnet3 header. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bonding: make bond_resend_igmp_join_requests_delayed staticstephen hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21sfc: make functions staticstephen hemminger12-41/+26
Make local functions and variable static. Do some rearrangement of the string table stuff to put it where it gets used. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21netxen: make local function static.stephen hemminger3-37/+16
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: print errors when dma mapping failStanislaw Gruszka1-3/+13
If dma mapping fail we are dropping packages or fail to open device. But exact reason of drop/fail stays unknow for a user, so print errors. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: (re)init phy on resumeStanislaw Gruszka1-0/+5
Fix switching device to low-speed mode after resume reported in: https://bugzilla.redhat.com/show_bug.cgi?id=502974 Reported-and-tested-by: Laurentiu Badea <bugzilla-redhat@wotevah.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: changing mtu clean upStanislaw Gruszka1-41/+6
Since we do not change rx buffer size any longer, we can clean up rtl8169_change_mtu and in consequence rtl8169_down. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: do not account fragments as packetsStanislaw Gruszka1-5/+3
Only increase tx_{packets,dropped} statistics when transmit or drop full skb, not just fragment. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: use pointer to struct device as local variableStanislaw Gruszka1-26/+25
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: replace PCI_DMA_{TO,FROM}DEVICE to DMA_{TO,FROM}_DEVICEStanislaw Gruszka1-7/+7
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: init rx ring cleanupStanislaw Gruszka1-30/+22
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21r8169: check dma mapping failuresStanislaw Gruszka1-18/+48
Check possible dma mapping errors and do clean up if it happens. Fix overwrap bug in rtl8169_tx_clear on the way. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bnx2x: Update bnx2x to use new vlan accleration.Hao Zheng4-84/+27
Make the bnx2x driver use the new vlan accleration model. Signed-off-by: Hao Zheng <hzheng@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> CC: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21ixgbe: Update ixgbe to use new vlan accleration.Jesse Gross3-79/+74
Make the ixgbe driver use the new vlan accleration model. Signed-off-by: Jesse Gross <jesse@nicira.com> CC: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com> CC: Emil Tantilov <emil.s.tantilov@intel.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bnx2: Update bnx2 to use new vlan accleration.Jesse Gross2-73/+28
Make the bnx2 driver use the new vlan accleration model. Signed-off-by: Jesse Gross <jesse@nicira.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Don't check for vlan group before vlan_tx_tag_present.Jesse Gross29-43/+38
Many (but not all) drivers check to see whether there is a vlan group configured before using a tag stored in the skb. There's not much point in this check since it just throws away data that should only be present in the expected circumstances. However, it will soon be legal and expected to get a vlan tag when no vlan group is configured, so remove this check from all drivers to avoid dropping the tags. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.Jesse Gross12-12/+12
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>