summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2010-02-09ath9k: fix keycache leak in split tkip caseMing Lei1-0/+1
If split tkip key is used, ath_delete_key should delete rx key and rx mic key. This patch fixes the leak of hw keycache in the case. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09iwlwifi: Send broadcast probe request only when asked toSamuel Ortiz2-17/+34
When running directed active scans we currently end up sending both the SSID probe requests and an additional broadcast one. This is due to the fact that we always leave the probe request template SSID IE length to 0. Instead we should set it to the first SSID to scan, and fill the direct_scan array with the remaining SSIDs to scan for. This way we only send what we've been asked to: a broadcast probe request when no directed scan is requested, and directed probe requests otherwise. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09iwlwifi: Add chain_noise support for 6050Ben Cahill1-17/+2
Existing iwl6050_ops->iwl6050_hcmd_utils structure had no pointers to chain noise functions (gain_computation and chain_noise_reset). As it turns out, by adding chain_noise_scale (see related patch), there is no need for separate chain noise function, so simply use iwl6000_ops->iwl5000_hcmd_utils, and remove those for 6050. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09iwlwifi: Add chain noise scaling factorBen Cahill4-2/+28
6x50 device requires a different scaling factor for Rx gain values sent to device via PHY_CALIBRATION_CMD (CHAIN_NOISE_GAIN_CMD). Rather than create a new iwlXXXX_gain_computation() function, add new chain_noise_scale member to struct iwl_cfg, and keep using iwl5000_gain_computation(). Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09libertas: don't retry commandsHolger Schurig3-30/+7
Retrying commands seldomly works, most often the firmware is in a weird state anyway and needs the device to reset. So it's better to report the broken state back to user-space. Also rename command_timer_fn() into lbs_cmd_timeout_handler(), which better reflect it's usage. Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09wl1251: fix txop unitKalle Valo1-1/+2
mac80211 uses unit units of 32 usec with txop but wl1251_acx_ac_cfg() expects it to be usecs. This fortunately didn't cause any severe problems, only that firmware was using incorrect WMM settings. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09b43: N-PHY: handle allocation fail in samples generationRafał Miłecki1-0/+4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09b43: N-PHY: load generated samplesRafał Miłecki1-2/+29
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09b43: N-PHY: partly implement SPUR workaroundRafał Miłecki2-1/+66
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09b43: N-PHY: save calibration for further restoreRafał Miłecki2-1/+51
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09b43: N-PHY: prepare code for reapplying TX cal coeffsRafał Miłecki1-1/+34
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09b43: N-PHY: implement overriding RF control intcRafał Miłecki1-8/+109
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09libertas/if_spi: needs linux/semaphore.hRandy Dunlap1-0/+1
libertas/if_spi.c needs to #include linux/semaphore.h to fix build errors: drivers/net/wireless/libertas/if_spi.c:59: error: field 'spi_ready' has incomplete type drivers/net/wireless/libertas/if_spi.c:60: error: field 'spi_thread_terminated' has incomplete type drivers/net/wireless/libertas/if_spi.c:785: error: implicit declaration of function 'down_interruptible' drivers/net/wireless/libertas/if_spi.c:787: error: implicit declaration of function 'up' drivers/net/wireless/libertas/if_spi.c:834: error: implicit declaration of function 'down' drivers/net/wireless/libertas/if_spi.c:943: error: implicit declaration of function 'sema_init' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09b43/b43legacy: Wake queues in wireless_core_startLarry Finger2-2/+3
If b43 or b43legacy are deauthenticated or disconnected, there is a possibility that a reconnection is tried with the queues stopped in mac80211. To prevent this, start the queues before setting STAT_INITIALIZED. In b43, a similar change has been in place (twice) in the wireless_core_init() routine. Remove the duplicate and add similar code to b43legacy. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.32] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09ath9k: Enable TIM timer interrupt only when needed.Senthil Balasubramanian3-14/+18
The TIM timer interrupt is enabled even before the ACK of nullqos is received which is unnecessary. Also clean up the CONF_PS part of config callback properly for better readability. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09ath9k: configure the beacon only if the STA is associatedSenthil Balasubramanian1-1/+7
beacons configuration SHOULD be done only if the STA is associated. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09mac80211_hwsim: add fake hw scan handlerJohannes Berg1-1/+43
For debugging hardware scan trigger/complete functionality, it was useful to have code in hwsim that pretends to do a hardware scan. This code could be extended to actually do the scan, but for now it was sufficient for me to only pretend. Since hwsim was written to ease debugging, it only makes sense to add it to it permanently. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09Merge branch 'master' of ↵John W. Linville6-10/+18
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: net/mac80211/scan.c
2010-02-09iwlwifi: Fix to set correct ht configurationWey-Yi Guy1-0/+1
iwl_set_rxon_ht() only get called in iwl_post_associate(); which cause possible incorrect ht configuration. Adding the call in iwl_mac_config() if IEEE80211_CONF_CHANGE_CHANNEL flag is set to re-configure and send rxon command. Fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2146 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-04b43: Fix throughput regressionLarry Finger2-3/+11
Commit c7ab5ef9bcd281135c21b4732c9be779585181be entitled "b43: implement short slot and basic rate handling" reduced the transmit throughput for my BCM4311 device from 18 Mb/s to 0.7 Mb/s. The basic rate handling portion is OK, the problem is in the short slot handling. Prior to this change, the short slot enable/disable routines were never called. Experimentation showed that the critical part was changing the value at offset 0x0010 in the shared memory. This is supposed to contain the 802.11 Slot Time in usec, but if it is changed from its initial value of zero, performance is destroyed. On the other hand, changing the value in the MMIO register corresponding to the Interframe Slot Time increased performance from 18 to 22 Mb/s. A BCM4306/3 also shows dramatic improvement of the transmit rate from 5.3 to 19.0 Mb/s. Other changes in the patch include removal of the magic number for the MMIO register, and allowing the slot time to be set for any PHY operating in the 2.4 GHz band. Previously, the routine was executed only for G PHYs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [Any stable version back through 2.6.28] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-03ath9k: add support for 802.11n bonded out AR2427Luis R. Rodriguez4-2/+11
Some single chip family devices are sold in the market with 802.11n bonded out, these have no hardware capability for 802.11n but ath9k can still support them. These are called AR2427. Cc: stable@kernel.org Reported-by: Rolf Leggewie <bugzilla.kernel.org@rolf.leggewie.biz> Tested-by: Bernhard Reiter <ockham@raz.or.at> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-03airo: fix setting zero length WEP keyStanislaw Gruszka1-16/+18
Patch prevents call set_wep_key() with zero key length. That fix long standing regression since commit c0380693520b1a1e4f756799a0edc379378b462a "airo: clean up WEP key operations". Additionally print call trace when someone will try to use improper parameters, and remove key.len = 0 assignment, because it is in not possible code path. Reported-by: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu> Bisected-by: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu> Tested-by: Chris Siebenmann <cks@cs.toronto.edu> Cc: Dan Williams <dcbw@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ath9k: fix access to freed data on unloadPavel Roskin4-29/+7
Calling ath_bus_cleanup() after ieee80211_free_hw() resulted in access to common->bus_ops, which is already freed as part of the device data. Remove the cleanup field in struct ath_bus_ops, as it was never used properly. Remove ath_bus_cleanup(). Merge cleanup functions in place of the ath_bus_cleanup() calls. Take care not to use any device data after ieee80211_free_hw(). Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ps3_gelic_wireless: Remove superfluous debug infoHamish Guthrie1-2/+1
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: implement setting RF sequenceRafał Miłecki1-4/+31
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add TX radio setup for newer PHYsRafał Miłecki1-1/+52
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: fix Cal TX IQ LO for newer PHYsRafał Miłecki1-1/+11
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add RSSI selection for newer PHYsRafał Miłecki1-1/+83
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: split RSSI selection into two per-PHY-revision functionsRafał Miłecki1-49/+52
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: add workarounds for gain controlRafał Miłecki1-1/+129
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01b43: N-PHY: update general workaroundsRafał Miłecki2-104/+115
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ath9k: allocate string buffer in read_file_dma() by kmalloc()Pavel Roskin1-17/+26
Using stack for that causes warnings with CONFIG_FRAME_WARN=1024 Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ath: make gcc check format arguments of ath_print(), fix all misusesPavel Roskin4-9/+9
Numeric channel is hard to get, so it won't be printed. Replace Mhz with MHz on the affected lines and add commas as needed. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01ps3_gelic_wireless: fix format warningJohn W. Linville1-1/+1
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-29iwlwifi: iwl_power_update_mode always hold mutexReinette Chatre2-1/+3
iwl_power_update_mode expects to be called with mutex held, for example to protect priv->vif. Only one caller currently does not do this, fix this. Also, add a comment to iwl_power_update_mode to indicate this requirement. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: fix typo in IWL_CCK_RATES_MASKJohannes Berg1-1/+1
Due to a typo, the variable contains OFDM rates as well. The only user doesn't care, so this change doesn't really do anything but fix up my confusion. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-01-29iwlwifi: remove unused work structsJohannes Berg1-4/+0
auth_work, calibrated_work, update_link_led and report_work are never used, so remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: remove bg_up workJohannes Berg3-29/+14
There's no need to queue a work struct from within a work struct, just move the code to execute directly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlagn: simplify ucode loadingJohannes Berg1-41/+22
Move the waiting into iwl5000_load_section instead of duplicating it in the caller. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: no need to test iw_mode in power savingJohannes Berg1-2/+1
mac80211 will only enable powersaving for station mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: update sensitivity calibration data for 1000 seriesWey-Yi Guy1-1/+71
Update sensitivity range values for 1000 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: update sensitivity calibration data for 5x00 seriesWey-Yi Guy1-2/+2
Update sensitivity range values for 5x00 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: update sensitivity calibration data for 6x00 seriesWey-Yi Guy1-1/+1
Update sensitivity range values for 6000 & 6x50 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: fix locking in iwl_mac_add_interfaceJohannes Berg1-8/+7
The corresponding iwl_mac_remove_interface only acquires the mutex, leading me to believe that the spinlock is not necessary. However, this doesn't actually acquire the mutex around the vif pointer check and assignment, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: sysassert identifier changeWey-Yi Guy1-1/+1
Change in uCode to include a unique identifier as part of sysassert, in order to tell the difference, add the "ADVANCED SYSASSERT" description when dump nic error to indicate the difference. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29iwlwifi: optimize power savingDaniel Halperin1-0/+2
In hostap AP mode, every time the client sends the AP a packet the STA_NOTIFY_AWAKE code is sent from mac80211. This results in a command being sent to the uCode even if the client was not asleep. The following simple patch has fixed the issue for me without any degradation that I can find. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-01-29ath9k: Handle full sleep in ps_restore.Vivek Natarajan2-2/+7
IDLE PS (Full Sleep) doesn't work when ifconfig up is done during Idle unassociated state. Fix this by restoring FULL SLEEP in ps_restore if CONF_IDLE is set. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-28ps3_gelic_wireless: fix directed ssid scanHamish Guthrie1-6/+9
If the association worker requests a directed ssid scan and a bss list already exists, the directed scan is not done. This patch corrects this and cleans up a few typos and debug messages. Signed-off-by: Hamish Guthrie <hamish.guthrie@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-28ps3_gelic_wireless: Remove PS3 gelic legacy wpa supportHamish Guthrie2-151/+0
The current PS3 gelic wireless driver has support for wireless extensions. The original PS3 gelic wireless driver exposed a dedicated API for a dedicated wpa_supplicant driver. This old API could be enabled with CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE, however, as this is not being used by any distros, and it is being removed from the driver and from wpa_supplicant. Signed-off-by: Hamish Guthrie <hamish.guthrie@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-27rtl8187: Add callback for get_tsfLarry Finger1-1/+10
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-24 19:03:42 +0300