summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-01-23net: usb: lan78xx: limit size of local TSO packetsEric Dumazet1-0/+1
[ Upstream commit f8d7408a4d7f60f8b2df0f81decdc882dd9c20dc ] lan78xx_tx_bh() makes sure to not exceed MAX_SINGLE_PACKET_SIZE bytes in the aggregated packets it builds, but does nothing to prevent large GSO packets being submitted. Pierre-Francois reported various hangs when/if TSO is enabled. For localy generated packets, we can use netif_set_gso_max_size() to limit the size of TSO packets. Note that forwarded packets could still hit the issue, so a complete fix might require implementing .ndo_features_check for this driver, forcing a software segmentation if the size of the TSO packet exceeds MAX_SINGLE_PACKET_SIZE. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com> Tested-by: RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: phy: dp83867: Set FORCE_LINK_GOOD to default after resetMichael Grzeschik1-1/+7
[ Upstream commit 86ffe920e669ec73035e84553e18edf17d16317c ] According to the Datasheet this bit should be 0 (Normal operation) in default. With the FORCE_LINK_GOOD bit set, it is not possible to get a link. This patch sets FORCE_LINK_GOOD to the default value after resetting the phy. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: hns: fix soft lockup when there is not enough memoryYonglong Liu1-3/+1
[ Upstream commit 49edd6a2c456150870ddcef5b7ed11b21d849e13 ] When there is not enough memory and napi_alloc_skb() return NULL, the HNS driver will print error message, and than try again, if the memory is not enough for a while, huge error message and the retry operation will cause soft lockup. When napi_alloc_skb() return NULL because of no memory, we can get a warn_alloc() call trace, so this patch deletes the error message. We already use polling mode to handle irq, but the retry operation will render the polling weight inactive, this patch just return budget when the rx is not completed to avoid dead loop. Fixes: 36eedfde1a36 ("net: hns: Optimize hns_nic_common_poll for better performance") Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: hns3: pad the short frame before sending to the hardwareYunsheng Lin1-0/+6
[ Upstream commit 36c67349a1a1c88b9cf11d7ca7762ababdb38867 ] The hardware can not handle short frames below or equal to 32 bytes according to the hardware user manual, and it will trigger a RAS error when the frame's length is below 33 bytes. This patch pads the SKB when skb->len is below 33 bytes before sending it to hardware. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23hv_netvsc: Fix memory leak when removing rndis deviceMohammed Gamal1-2/+0
[ Upstream commit 536dc5df2808efbefc5acee334d3c4f701790ec0 ] kmemleak detects the following memory leak when hot removing a network device: unreferenced object 0xffff888083f63600 (size 256): comm "kworker/0:1", pid 12, jiffies 4294831717 (age 1113.676s) hex dump (first 32 bytes): 00 40 c7 33 80 88 ff ff 00 00 00 00 10 00 00 00 .@.3............ 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<00000000d4a8f5be>] rndis_filter_device_add+0x117/0x11c0 [hv_netvsc] [<000000009c02d75b>] netvsc_probe+0x5e7/0xbf0 [hv_netvsc] [<00000000ddafce23>] vmbus_probe+0x74/0x170 [hv_vmbus] [<00000000046e64f1>] really_probe+0x22f/0xb50 [<000000005cc35eb7>] driver_probe_device+0x25e/0x370 [<0000000043c642b2>] bus_for_each_drv+0x11f/0x1b0 [<000000005e3d09f0>] __device_attach+0x1c6/0x2f0 [<00000000a72c362f>] bus_probe_device+0x1a6/0x260 [<0000000008478399>] device_add+0x10a3/0x18e0 [<00000000cf07b48c>] vmbus_device_register+0xe7/0x1e0 [hv_vmbus] [<00000000d46cf032>] vmbus_add_channel_work+0x8ab/0x1770 [hv_vmbus] [<000000002c94bb64>] process_one_work+0x919/0x17d0 [<0000000096de6781>] worker_thread+0x87/0xb40 [<00000000fbe7397e>] kthread+0x333/0x3f0 [<000000004f844269>] ret_from_fork+0x3a/0x50 rndis_filter_device_add() allocates an instance of struct rndis_device which never gets deallocated as rndis_filter_device_remove() sets net_device->extension which points to the rndis_device struct to NULL, leaving the rndis_device dangling. Since net_device->extension is eventually freed in free_netvsc_device(), we refrain from setting it to NULL inside rndis_filter_device_remove() Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23macvlan: use skb_reset_mac_header() in macvlan_queue_xmit()Eric Dumazet1-2/+3
[ Upstream commit 1712b2fff8c682d145c7889d2290696647d82dab ] I missed the fact that macvlan_broadcast() can be used both in RX and TX. skb_eth_hdr() makes only sense in TX paths, so we can not use it blindly in macvlan_broadcast() Fixes: 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jurgen Van Ham <juvanham@gmail.com> Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23net: stmmac: Enable 16KB buffer sizeJose Abreu1-1/+3
commit b2f3a481c4cd62f78391b836b64c0a6e72b503d2 upstream. XGMAC supports maximum MTU that can go to 16KB. Lets add this check in the calculation of RX buffer size. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: stmmac: 16KB buffer must be 16 byte alignedJose Abreu1-3/+2
commit 8605131747e7e1fd8f6c9f97a00287aae2b2c640 upstream. The 16KB RX Buffer must also be 16 byte aligned. Fix it. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17iwlwifi: mvm: fix support for single antenna diversityLuca Coelho1-4/+16
commit bb99ff9baa02beb9216c86678999342197c849cc upstream. When the single antenna diversity support was sent upstream, only some definitions were sent, due to a bad revert. Fix this by adding the actual code. Fixes: 5952e0ec3f05 ("iwlwifi: mvm: add support for single antenna diversity") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17rtlwifi: Remove unnecessary NULL check in rtl_regd_initNathan Chancellor1-1/+1
commit 091c6e9c083f7ebaff00b37ad13562d51464d175 upstream. When building with Clang + -Wtautological-pointer-compare: drivers/net/wireless/realtek/rtlwifi/regd.c:389:33: warning: comparison of address of 'rtlpriv->regd' equal to a null pointer is always false [-Wtautological-pointer-compare] if (wiphy == NULL || &rtlpriv->regd == NULL) ~~~~~~~~~^~~~ ~~~~ 1 warning generated. The address of an array member is never NULL unless it is the first struct member so remove the unnecessary check. This was addressed in the staging version of the driver in commit f986978b32b3 ("Staging: rtlwifi: remove unnecessary NULL check"). While we are here, fix the following checkpatch warning: CHECK: Comparison to NULL could be written "!wiphy" 35: FILE: drivers/net/wireless/realtek/rtlwifi/regd.c:389: + if (wiphy == NULL) Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Link:https://github.com/ClangBuiltLinux/linux/issues/750 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17iwlwifi: mvm: consider ieee80211 station max amsdu valueMordechay Goodstein2-2/+13
commit ee4cce9b9d6421d037ffc002536b918fd7f4aff3 upstream. debugfs amsdu_len sets only the max_amsdu_len for ieee80211 station so take it into consideration while getting max amsdu Fixes: af2984e9e625 ("iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packets") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17rsi: fix potential null dereference in rsi_probe()Denis Efremov1-1/+1
commit f170d44bc4ec2feae5f6206980e7ae7fbf0432a0 upstream. The id pointer can be NULL in rsi_probe(). It is checked everywhere except for the else branch in the idProduct condition. The patch adds NULL check before the id dereference in the rsi_dbg() call. Fixes: 54fdb318c111 ("rsi: add new device model for 9116") Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17ath9k: use iowrite32 over __raw_writelChristian Lamparter1-1/+1
commit 22d0d5ae7a089967e9295a06694aa3e8a812b15e upstream. This patch changes the ath9k_pci_owl_loader to use the same iowrite32 memory accessor that ath9k_pci is using to communicate with the PCI(e) chip. This will fix endian issues that came up during testing with loaned AVM Fritz!Box 7360 (Lantiq MIPS SoCs + AR9287). Fixes: 5a4f2040fd07 ("ath9k: add loader for AR92XX (and older) pci(e)") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14ath10k: fix memory leakNavid Emamdoost1-0/+1
commit b8d17e7d93d2beb89e4f34c59996376b8b544792 upstream. In ath10k_usb_hif_tx_sg the allocated urb should be released if usb_submit_urb fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14rtl8xxxu: prevent leaking urbNavid Emamdoost1-0/+1
commit a2cdd07488e666aa93a49a3fc9c9b1299e27ef3c upstream. In rtl8xxxu_submit_int_urb if usb_submit_urb fails the allocated urb should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14mwifiex: pcie: Fix memory leak in mwifiex_pcie_alloc_cmdrsp_bufNavid Emamdoost1-1/+3
commit db8fd2cde93227e566a412cf53173ffa227998bc upstream. In mwifiex_pcie_alloc_cmdrsp_buf, a new skb is allocated which should be released if mwifiex_map_pci_memory() fails. The release is added. Fixes: fc3314609047 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14mwifiex: fix possible heap overflow in mwifiex_process_country_ie()Ganapathi Bhat1-2/+11
commit 3d94a4a8373bf5f45cf5f939e88b8354dbf2311b upstream. mwifiex_process_country_ie() function parse elements of bss descriptor in beacon packet. When processing WLAN_EID_COUNTRY element, there is no upper limit check for country_ie_len before calling memcpy. The destination buffer domain_info->triplet is an array of length MWIFIEX_MAX_TRIPLET_802_11D(83). The remote attacker can build a fake AP with the same ssid as real AP, and send malicous beacon packet with long WLAN_EID_COUNTRY elemen (country_ie_len > 83). Attacker can force STA connect to fake AP on a different channel. When the victim STA connects to fake AP, will trigger the heap buffer overflow. Fix this by checking for length and if found invalid, don not connect to the AP. This fix addresses CVE-2019-14895. Reported-by: huangwen <huangwenabc@gmail.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling ↵Florian Faber1-11/+10
to irq mode commit 2d77bd61a2927be8f4e00d9478fe6996c47e8d45 upstream. Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system. The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished. With this patch, no more lockups were observed over a test period of ten days. Fixes: afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by: Florian Faber <faber@faberman.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14can: tcan4x5x: tcan4x5x_can_probe(): get the device out of standby before ↵Sean Nyekjaer1-0/+4
register access commit 3069ce620daed85e4ef2b0c087dca2509f809470 upstream. The m_can tries to detect if Non ISO Operation is available while in standby mode, this function results in the following error: | tcan4x5x spi2.0 (unnamed net_device) (uninitialized): Failed to init module | tcan4x5x spi2.0: m_can device registered (irq=84, version=32) | tcan4x5x spi2.0 can2: TCAN4X5X successfully initialized. When the tcan device comes out of reset it goes in standby mode. The m_can driver tries to access the control register but fails due to the device being in standby mode. So this patch will put the tcan device in normal mode before the m_can driver does the initialization. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Cc: stable@vger.kernel.org Signed-off-by: Sean Nyekjaer <sean@geanix.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14can: gs_usb: gs_usb_probe(): use descriptors of current altsettingJohan Hovold1-2/+2
commit 2f361cd9474ab2c4ab9ac8db20faf81e66c6279b upstream. Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by: Johan Hovold <johan@kernel.org> Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14can: kvaser_usb: fix interface sanity checkJohan Hovold2-2/+2
commit 5660493c637c9d83786f1c9297f403eae44177b6 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jimmy Assarsson <extja@kvaser.com> Cc: Christer Beskow <chbe@kvaser.com> Cc: Nicklas Johansson <extnj@kvaser.com> Cc: Martin Henriksson <mh@kvaser.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14Merge tag 'v5.4.11' into dev-5.4Joel Stanley45-136/+284
This is the 5.4.11 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-01-12net/mlx5: DR, Init lists that are used in rule's memberErez Shitrit1-0/+3
[ Upstream commit df55c5586e5185f890192a6802dc5b46fddd3606 ] Whenever adding new member of rule object we attach it to 2 lists, These 2 lists should be initialized first. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12net/mlx5e: Fix hairpin RSS table sizeEli Cohen3-17/+17
[ Upstream commit 6412bb396a63f28de994b1480edf8e4caf4aa494 ] Set hairpin table size to the corret size, based on the groups that would be created in it. Groups are laid out on the table such that a group occupies a range of entries in the table. This implies that the group ranges should have correspondence to the table they are laid upon. The patch cited below made group 1's size to grow hence causing overflow of group range laid on the table. Fixes: a795d8db2a6d ("net/mlx5e: Support RSS for IP-in-IP and IPv6 tunneled packets") Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12net/mlx5: DR, No need for atomic refcount for internal SW steering resourcesYevgeny Kliteynik3-12/+14
[ Upstream commit 4ce380ca477507e2f413584cdd99e1698d6682d6 ] No need for an atomic refcounter for the STE and hashtables. These are internal SW steering resources and they are always under domain mutex. This also fixes the following refcount error: refcount_t: addition on 0; use-after-free. WARNING: CPU: 9 PID: 3527 at lib/refcount.c:25 refcount_warn_saturate+0x81/0xe0 Call Trace: dr_table_init_nic+0x10d/0x110 [mlx5_core] mlx5dr_table_create+0xb4/0x230 [mlx5_core] mlx5_cmd_dr_create_flow_table+0x39/0x120 [mlx5_core] __mlx5_create_flow_table+0x221/0x5f0 [mlx5_core] esw_create_offloads_fdb_tables+0x180/0x5a0 [mlx5_core] ... Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12net/mlx5e: Always print health reporter message to dmesgEran Ben Elisha1-3/+4
[ Upstream commit 99cda45426c9a2c59bb2f7cb886a405440282455 ] In case a reporter exists, error message is logged only to the devlink tracer. The devlink tracer is a visibility utility only, which user can choose not to monitor. After cited patch, 3rd party monitoring tools that tracks these error message will no longer find them in dmesg, causing a regression. With this patch, error messages are also logged into the dmesg. Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12net: dsa: mv88e6xxx: force cmode write on 6141/6341Baruch Siach1-6/+6
[ Upstream commit f7a48b68abd9b20ce1ac6298aaaa3c4d158271dd ] mv88e6xxx_port_set_cmode() relies on cmode stored in struct mv88e6xxx_port to skip cmode update when the requested value matches the cached value. It turns out that mv88e6xxx_port_hidden_write() might change the port cmode setting as a side effect, so we can't rely on the cached value to determine that cmode update in not necessary. Force cmode update in mv88e6341_port_set_cmode(), to make serdes configuration work again. Other mv88e6xxx_port_set_cmode() callers keep the current behaviour. This fixes serdes configuration of the 6141 switch on SolidRun Clearfog GT-8K. Fixes: 7a3007d22e8 ("net: dsa: mv88e6xxx: fully support SERDES on Topaz family") Reported-by: Denis Odintsov <d.odintsov@traviangames.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12net/mlx5: Move devlink registration before interfaces loadMichael Guralnik1-7/+9
[ Upstream commit a6f3b62386a02c1e94bfa22c543f82d63f5e631b ] Register devlink before interfaces are added. This will allow interfaces to use devlink while initalizing. For example, call mlx5_is_roce_enabled. Fixes: aba25279c100 ("net/mlx5e: Add TX reporter support") Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12macb: Don't unregister clks unconditionallyStephen Boyd1-3/+1
[ Upstream commit d89091a4930ee0d80bee3e259a98513f3a2543ec ] The only clk init function in this driver that register a clk is fu540_c000_clk_init(), and thus we need to unregister the clk when this driver is removed on that platform. Other init functions, for example macb_clk_init(), don't register clks and therefore we shouldn't unregister the clks when this driver is removed. Convert this registration path to devm so it gets auto-unregistered when this driver is removed and drop the clk_unregister() calls in driver remove (and error paths) so that we don't erroneously remove a clk from the system that isn't registered by this driver. Otherwise we get strange crashes with a use-after-free when the devm_clk_get() call in macb_clk_init() calls clk_put() on a clk pointer that has become invalid because it is freed in clk_unregister(). Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Yash Shah <yash.shah@sifive.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFOPetr Machata1-0/+7
[ Upstream commit 3971a535b839489e4ea31796cc086e6ce616318c ] The following patch will change PRIO to replace a removed Qdisc with an invisible FIFO, instead of NOOP. mlxsw will see this replacement due to the graft message that is generated. But because FIFO does not issue its own REPLACE message, when the graft operation takes place, the Qdisc that mlxsw tracks under the indicated band is still the old one. The child handle (0:0) therefore does not match, and mlxsw rejects the graft operation, which leads to an extack message: Warning: Offloading graft operation failed. Fix by ignoring the invisible children in the PRIO graft handler. The DESTROY message of the removed Qdisc is going to follow shortly and handle the removal. Fixes: 32dc5efc6cb4 ("mlxsw: spectrum: qdiscs: prio: Handle graft command") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12vxlan: fix tos value before xmitHangbin Liu1-2/+2
[ Upstream commit 71130f29979c7c7956b040673e6b9d5643003176 ] Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter tos value by RT_TOS() instead of using config tos directly. vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS() directly in function ip_tunnel_ecn_encap(). Fixes: 206aaafcd279 ("VXLAN: Use IP Tunnels tunnel ENC encap API") Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12net: usb: lan78xx: fix possible skb leakEric Dumazet1-6/+3
[ Upstream commit 47240ba0cd09bb6fe6db9889582048324999dfa4 ] If skb_linearize() fails, we need to free the skb. TSO makes skb bigger, and this bug might be the reason Raspberry Pi 3B+ users had to disable TSO. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12net: stmmac: Fixed link does not need MDIO BusJose Abreu1-1/+1
[ Upstream commit da29f2d84bd10234df570b7f07cbd0166e738230 ] When using fixed link we don't need the MDIO bus support. Reported-by: Heiko Stuebner <heiko@sntech.de> Reported-by: kernelci.org bot <bot@kernelci.org> Fixes: d3e014ec7d5e ("net: stmmac: platform: Fix MDIO init for platforms without PHY") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Acked-by: Sriram Dash <Sriram.dash@samsung.com> Tested-by: Patrice Chotard <patrice.chotard@st.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail> # Lamobo R1 (fixed-link + MDIO sub node for roboswitch). Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12net: stmmac: dwmac-sunxi: Allow all RGMII modesChen-Yu Tsai1-1/+1
[ Upstream commit 52cc73e5404c7ba0cbfc50cb4c265108c84b3d5a ] Allow all the RGMII modes to be used. This would allow us to represent the hardware better in the device tree with RGMII_ID where in most cases the PHY's internal delay for both RX and TX are used. Fixes: af0bd4e9ba80 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12net: stmmac: dwmac-sun8i: Allow all RGMII modesChen-Yu Tsai1-0/+3
[ Upstream commit f1239d8aa84dad8fe4b6cc1356f40fc8e842db47 ] Allow all the RGMII modes to be used. This would allow us to represent the hardware better in the device tree with RGMII_ID where in most cases the PHY's internal delay for both RX and TX are used. Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12net: freescale: fec: Fix ethtool -d runtime PMAndrew Lunn1-0/+9
[ Upstream commit c72a0bc0aa19f49160330a65ab77184b5b7d131b ] In order to dump the FECs registers the clocks have to be ticking, otherwise a data abort occurs. Add calls to runtime PM so they are enabled and later disabled. Fixes: e8fcfcd5684a ("net: fec: optimize the clock management to save power") Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12net: dsa: mv88e6xxx: Preserve priority when setting CPU port.Andrew Lunn2-0/+6
[ Upstream commit d8dc2c9676e614ef62f54a155b50076888c8a29a ] The 6390 family uses an extended register to set the port connected to the CPU. The lower 5 bits indicate the port, the upper three bits are the priority of the frames as they pass through the switch, what egress queue they should use, etc. Since frames being set to the CPU are typically management frames, BPDU, IGMP, ARP, etc set the priority to 7, the reset default, and the highest. Fixes: 33641994a676 ("net: dsa: mv88e6xxx: Monitor and Management tables") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12macvlan: do not assume mac_header is set in macvlan_broadcast()Eric Dumazet1-1/+1
[ Upstream commit 96cc4b69581db68efc9749ef32e9cf8e0160c509 ] Use of eth_hdr() in tx path is error prone. Many drivers call skb_reset_mac_header() before using it, but others do not. Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") attempted to fix this generically, but commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option") brought back the macvlan bug. Lets add a new helper, so that tx paths no longer have to call skb_reset_mac_header() only to get a pointer to skb->data. Hopefully we will be able to revert 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") and save few cycles in transmit fast path. BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline] BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579 CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] mc_hash drivers/net/macvlan.c:251 [inline] macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline] macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559 __netdev_start_xmit include/linux/netdevice.h:4447 [inline] netdev_start_xmit include/linux/netdevice.h:4461 [inline] dev_direct_xmit+0x419/0x630 net/core/dev.c:4079 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240 packet_snd net/packet/af_packet.c:2966 [inline] packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 __sys_sendto+0x262/0x380 net/socket.c:1985 __do_sys_sendto net/socket.c:1997 [inline] __se_sys_sendto net/socket.c:1993 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x442639 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639 RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x163/0x770 mm/slab.c:3665 kmalloc include/linux/slab.h:561 [inline] tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a4932000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1025 bytes inside of 4096-byte region [ffff8880a4932000, ffff8880a4933000) The buggy address belongs to the page: page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000 raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: b863ceb7ddce ("[NET]: Add macvlan driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12gtp: fix bad unlock balance in gtp_encap_enable_socketEric Dumazet1-2/+3
[ Upstream commit 90d72256addff9e5f8ad645e8f632750dd1f8935 ] WARNING: bad unlock balance detected! 5.5.0-rc5-syzkaller #0 Not tainted ------------------------------------- syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at: [<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 but there are no more locks to release! other info that might help us debug this: 2 locks held by syz-executor921/9688: #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951 stack backtrace: CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline] print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984 __lock_release kernel/locking/lockdep.c:4242 [inline] lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503 sock_release_ownership include/net/sock.h:1496 [inline] release_sock+0x17c/0x1c0 net/core/sock.c:2961 gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 gtp_encap_enable drivers/net/gtp.c:852 [inline] gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666 __rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 ____sys_sendmsg+0x753/0x880 net/socket.c:2330 ___sys_sendmsg+0x100/0x170 net/socket.c:2384 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg net/socket.c:2424 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x445d49 Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8019074db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dac38 RCX: 0000000000445d49 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 00000000006dac30 R08: 0000000000000004 R09: 0000000000000000 R10: 0000000000000008 R11: 0000000000000246 R12: 00000000006dac3c R13: 00007ffea687f6bf R14: 00007f80190759c0 R15: 20c49ba5e353f7cf Fixes: e198987e7dd7 ("gtp: fix suspicious RCU usage") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12hv_netvsc: Fix unwanted rx_table resetHaiyang Zhang3-6/+11
[ Upstream commit b0689faa8efc5a3391402d7ae93bd373b7248e51 ] In existing code, the receive indirection table, rx_table, is in struct rndis_device, which will be reset when changing MTU, ringparam, etc. User configured receive indirection table values will be lost. To fix this, move rx_table to struct net_device_context, and check netif_is_rxfh_configured(), so rx_table will be set to default only if no user configured value. Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12net/ixgbe: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy2-3/+12
[ Upstream commit c0fdccfd226a1424683d3000d9e08384391210a2 ] Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. ixgbe_down already calls synchronize_rcu after setting __IXGBE_DOWN. 2. After switching the XDP program, call synchronize_rcu to let ixgbe_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down. 4. Disabling UMEM sets __IXGBE_TX_DISABLED before closing hardware resources and resetting xsk_umem. Check that bit in ixgbe_xsk_wakeup to avoid using the XDP ring when it's already destroyed. synchronize_rcu is called from ixgbe_txrx_ring_disable. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-5-maximmi@mellanox.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12net/i40e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy3-4/+12
[ Upstream commit b3873a5be757b44d51af542a50a6f2a3b6f95284 ] Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. i40e_down already calls synchronize_rcu. On i40e_down either __I40E_VSI_DOWN or __I40E_CONFIG_BUSY is set. Check the latter in i40e_xsk_wakeup (the former is already checked there). 2. After switching the XDP program, call synchronize_rcu to let i40e_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down (see i40e_prep_for_reset and i40e_pf_quiesce_all_vsi). 4. Disabling UMEM sets __I40E_CONFIG_BUSY, too. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-4-maximmi@mellanox.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12net/mlx5e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy5-33/+13
[ Upstream commit 9cf88808ad6a0f1e958e00abd9a081295fe6da0c ] After disabling resources necessary for XSK (the XDP program, channels, XSK queues), use synchronize_rcu to wait until the XSK wakeup function finishes, before freeing the resources. Suspend XSK wakeups during switching channels. If the XDP program is being removed, synchronize_rcu before closing the old channels to allow XSK wakeup to complete. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-3-maximmi@mellanox.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12net: stmmac: Always arm TX Timer at end of transmission startJose Abreu1-0/+2
[ Upstream commit 4772f26db8d1fb568c4862c538344a1b5fb52081 ] If TX Coalesce timer is enabled we should always arm it, otherwise we may hit the case where an interrupt is missed and the TX Queue will timeout. Arming the timer does not necessarly mean it will run the tx_clean() because this function is wrapped around NAPI launcher. Fixes: 9125cdd1be11 ("stmmac: add the initial tx coalesce schema") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12net: stmmac: RX buffer size must be 16 byte alignedJose Abreu1-1/+1
[ Upstream commit 8d558f0294fe92e04af192e221d0d0f6a180ee7b ] We need to align the RX buffer size to at least 16 byte so that IP doesn't mis-behave. This is required by HW. Changes from v2: - Align UP and not DOWN (David) Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12net: stmmac: xgmac: Clear previous RX buffer sizeJose Abreu2-1/+4
[ Upstream commit 11d55fd9975f8e46a0e5e19c14899544e81e1e15 ] When switching between buffer sizes we need to clear the previous value. Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12net: stmmac: Do not accept invalid MTU valuesJose Abreu1-0/+12
[ Upstream commit eaf4fac478077d4ed57cbca2c044c4b58a96bd98 ] The maximum MTU value is determined by the maximum size of TX FIFO so that a full packet can fit in the FIFO. Add a check for this in the MTU change callback. Also check if provided and rounded MTU does not passes the maximum limit of 16K. Changes from v2: - Align MTU before checking if its valid Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12net: stmmac: Determine earlier the size of RX bufferJose Abreu1-13/+11
[ Upstream commit 5d626c879e238be9585bd59a61eb606c9408178a ] Split Header feature needs to know the size of RX buffer but current code is determining it too late. Fix this by moving the RX buffer computation to earlier stage. Changes from v2: - Do not try to align already aligned buffer size Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12net: stmmac: selftests: Needs to check the number of Multicast regsJose Abreu1-0/+4
[ Upstream commit 08c965430869ed423921bd9058ae59f75207feb6 ] When running the MC and UC filter tests we setup a multicast address that its expected to be blocked. If the number of available multicast registers is zero, driver will always pass the multicast packets which will fail the test. Check if available multicast addresses is enough before running the tests. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12net: usb: lan78xx: Fix error message format specifierCristian Birsan1-1/+1
[ Upstream commit 858ce8ca62ea1530f2779d0e3f934b0176e663c3 ] Display the return code as decimal integer. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 14:04:54 +0300