summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-01-29net/mlx5: DR, use non preemptible call to get the current cpu numberErez Shitrit1-1/+2
commit c0702a4bd41829f05638ec2dab70f6bb8d8010ce upstream. Use raw_smp_processor_id instead of smp_processor_id() otherwise we will get the following trace in debug-kernel: BUG: using smp_processor_id() in preemptible [00000000] code: devlink caller is dr_create_cq.constprop.2+0x31d/0x970 [mlx5_core] Call Trace: dump_stack+0x9a/0xf0 debug_smp_processor_id+0x1f3/0x200 dr_create_cq.constprop.2+0x31d/0x970 genl_family_rcv_msg+0x5fd/0x1170 genl_rcv_msg+0xb8/0x160 netlink_rcv_skb+0x11e/0x340 Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29net/mlx5: E-Switch, Prevent ingress rate configuration of uplink repEli Cohen1-2/+7
commit e401a1848be87123a2b2049addbf21138cb47081 upstream. Since the implementation relies on limiting the VF transmit rate to simulate ingress rate limiting, and since either uplink representor or ecpf are not associated with a VF, we limit the rate limit configuration for those ports. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29net/mlx5: DR, Enable counter on non-fwd-dest objectsErez Shitrit1-13/+29
commmit b850a82114df9b0ec1d191dc64eed1f20a772e0f upstream. The current code handles only counters that attached to dest, we still have the cases where we have counter on non-dest, like over drop etc. Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29net/mlx5: Update the list of the PCI supported devicesMeir Lichtinger1-0/+1
commit 505a7f5478062c6cd11e22022d9f1bf64cd8eab3 upstream Add the upcoming ConnectX-7 device ID. Fixes: 85327a9c4150 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Meir Lichtinger <meirl@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29net/mlx5: Fix lowest FDB pool sizePaul Blakey1-1/+1
commit 93b8a7ecb7287cc9b0196f12a25b57c2462d11dc upstream. The pool sizes represent the pool sizes in the fw. when we request a pool size from fw, it will return the next possible group. We track how many pools the fw has left and start requesting groups from the big to the small. When we start request 4k group, which doesn't exists in fw, fw wants to allocate the next possible size, 64k, but will fail since its exhausted. The correct smallest pool size in fw is 128 and not 4k. Fixes: e52c28024008 ("net/mlx5: E-Switch, Add chains and priorities") Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29net: Fix packet reordering caused by GRO and listified RX cooperationMaxim Mikityanskiy1-2/+2
[ Upstream commit c80794323e82ac6ab45052ebba5757ce47b4b588 ] Commit 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs") introduces batching of GRO_NORMAL packets in napi_frags_finish, and commit 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") adds the same to napi_skb_finish. However, dev_gro_receive (that is called just before napi_{frags,skb}_finish) can also pass skbs to the networking stack: e.g., when the GRO session is flushed, napi_gro_complete is called, which passes pp directly to netif_receive_skb_internal, skipping napi->rx_list. It means that the packet stored in pp will be handled by the stack earlier than the packets that arrived before, but are still waiting in napi->rx_list. It leads to TCP reorderings that can be observed in the TCPOFOQueue counter in netstat. This commit fixes the reordering issue by making napi_gro_complete also use napi->rx_list, so that all packets going through GRO will keep their order. In order to keep napi_gro_flush working properly, gro_normal_list calls are moved after the flush to clear napi->rx_list. iwlwifi calls napi_gro_flush directly and does the same thing that is done by gro_normal_list, so the same change is applied there: napi_gro_flush is moved to be before the flush of napi->rx_list. A few other drivers also use napi_gro_flush (brocade/bna/bnad.c, cortina/gemini.c, hisilicon/hns3/hns3_enet.c). The first two also use napi_complete_done afterwards, which performs the gro_normal_list flush, so they are fine. The latter calls napi_gro_receive right after napi_gro_flush, so it can end up with non-empty napi->rx_list anyway. Fixes: 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Cc: Alexander Lobakin <alobakin@dlink.ru> Cc: Edward Cree <ecree@solarflare.com> Acked-by: Alexander Lobakin <alobakin@dlink.ru> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29mlxsw: spectrum_acl: Fix use-after-free during reloadIdo Schimmel1-4/+12
[ Upstream commit 971de2e572118c1128bff295341e37b6c8b8f108 ] During reload (or module unload), the router block is de-initialized. Among other things, this results in the removal of a default multicast route from each active virtual router (VRF). These default routes are configured during initialization to trap packets to the CPU. In Spectrum-2, unlike Spectrum-1, multicast routes are implemented using ACL rules. Since the router block is de-initialized before the ACL block, it is possible that the ACL rules corresponding to the default routes are deleted while being accessed by the ACL delayed work that queries rules' activity from the device. This can result in a rare use-after-free [1]. Fix this by protecting the rules list accessed by the delayed work with a lock. We cannot use a spinlock as the activity read operation is blocking. [1] [ 123.331662] ================================================================== [ 123.339920] BUG: KASAN: use-after-free in mlxsw_sp_acl_rule_activity_update_work+0x330/0x3b0 [ 123.349381] Read of size 8 at addr ffff8881f3bb4520 by task kworker/0:2/78 [ 123.357080] [ 123.358773] CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 5.5.0-rc5-custom-33108-gf5df95d3ef41 #2209 [ 123.368898] Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 [ 123.378456] Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work [ 123.385970] Call Trace: [ 123.388734] dump_stack+0xc6/0x11e [ 123.392568] print_address_description.constprop.4+0x21/0x340 [ 123.403236] __kasan_report.cold.8+0x76/0xb1 [ 123.414884] kasan_report+0xe/0x20 [ 123.418716] mlxsw_sp_acl_rule_activity_update_work+0x330/0x3b0 [ 123.444034] process_one_work+0xb06/0x19a0 [ 123.453731] worker_thread+0x91/0xe90 [ 123.467348] kthread+0x348/0x410 [ 123.476847] ret_from_fork+0x24/0x30 [ 123.480863] [ 123.482545] Allocated by task 73: [ 123.486273] save_stack+0x19/0x80 [ 123.490000] __kasan_kmalloc.constprop.6+0xc1/0xd0 [ 123.495379] mlxsw_sp_acl_rule_create+0xa7/0x230 [ 123.500566] mlxsw_sp2_mr_tcam_route_create+0xf6/0x3e0 [ 123.506334] mlxsw_sp_mr_tcam_route_create+0x5b4/0x820 [ 123.512102] mlxsw_sp_mr_table_create+0x3b5/0x690 [ 123.517389] mlxsw_sp_vr_get+0x289/0x4d0 [ 123.521797] mlxsw_sp_fib_node_get+0xa2/0x990 [ 123.526692] mlxsw_sp_router_fib4_event_work+0x54c/0x2d60 [ 123.532752] process_one_work+0xb06/0x19a0 [ 123.537352] worker_thread+0x91/0xe90 [ 123.541471] kthread+0x348/0x410 [ 123.545103] ret_from_fork+0x24/0x30 [ 123.549113] [ 123.550795] Freed by task 518: [ 123.554231] save_stack+0x19/0x80 [ 123.557958] __kasan_slab_free+0x125/0x170 [ 123.562556] kfree+0xd7/0x3a0 [ 123.565895] mlxsw_sp_acl_rule_destroy+0x63/0xd0 [ 123.571081] mlxsw_sp2_mr_tcam_route_destroy+0xd5/0x130 [ 123.576946] mlxsw_sp_mr_tcam_route_destroy+0xba/0x260 [ 123.582714] mlxsw_sp_mr_table_destroy+0x1ab/0x290 [ 123.588091] mlxsw_sp_vr_put+0x1db/0x350 [ 123.592496] mlxsw_sp_fib_node_put+0x298/0x4c0 [ 123.597486] mlxsw_sp_vr_fib_flush+0x15b/0x360 [ 123.602476] mlxsw_sp_router_fib_flush+0xba/0x470 [ 123.607756] mlxsw_sp_vrs_fini+0xaa/0x120 [ 123.612260] mlxsw_sp_router_fini+0x137/0x384 [ 123.617152] mlxsw_sp_fini+0x30a/0x4a0 [ 123.621374] mlxsw_core_bus_device_unregister+0x159/0x600 [ 123.627435] mlxsw_devlink_core_bus_device_reload_down+0x7e/0xb0 [ 123.634176] devlink_reload+0xb4/0x380 [ 123.638391] devlink_nl_cmd_reload+0x610/0x700 [ 123.643382] genl_rcv_msg+0x6a8/0xdc0 [ 123.647497] netlink_rcv_skb+0x134/0x3a0 [ 123.651904] genl_rcv+0x29/0x40 [ 123.655436] netlink_unicast+0x4d4/0x700 [ 123.659843] netlink_sendmsg+0x7c0/0xc70 [ 123.664251] __sys_sendto+0x265/0x3c0 [ 123.668367] __x64_sys_sendto+0xe2/0x1b0 [ 123.672773] do_syscall_64+0xa0/0x530 [ 123.676892] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 123.682552] [ 123.684238] The buggy address belongs to the object at ffff8881f3bb4500 [ 123.684238] which belongs to the cache kmalloc-128 of size 128 [ 123.698261] The buggy address is located 32 bytes inside of [ 123.698261] 128-byte region [ffff8881f3bb4500, ffff8881f3bb4580) [ 123.711303] The buggy address belongs to the page: [ 123.716682] page:ffffea0007ceed00 refcount:1 mapcount:0 mapping:ffff888236403500 index:0x0 [ 123.725958] raw: 0200000000000200 dead000000000100 dead000000000122 ffff888236403500 [ 123.734646] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 [ 123.743315] page dumped because: kasan: bad access detected [ 123.749562] [ 123.751241] Memory state around the buggy address: [ 123.756620] ffff8881f3bb4400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 123.764716] ffff8881f3bb4480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 123.772812] >ffff8881f3bb4500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 123.780904] ^ [ 123.785697] ffff8881f3bb4580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 123.793793] ffff8881f3bb4600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 123.801883] ================================================================== Fixes: cf7221a4f5a5 ("mlxsw: spectrum_router: Add Multicast routing support for Spectrum-2") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29airo: Add missing CAP_NET_ADMIN check in AIROOLDIOCTL/SIOCDEVPRIVATEMichael Ellerman1-10/+8
[ Upstream commit 78f7a7566f5eb59321e99b55a6fdb16ea05b37d1 ] The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl(). The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command. Some of the commands are handled in readrids(), where the user controlled command is converted into a driver-internal value called "ridcode". There are two command values, AIROGWEPKTMP and AIROGWEPKNV, which correspond to ridcode values of RID_WEP_TEMP and RID_WEP_PERM respectively. These commands both have checks that the user has CAP_NET_ADMIN, with the comment that "Only super-user can read WEP keys", otherwise they return -EPERM. However there is another command value, AIRORRID, that lets the user specify the ridcode value directly, with no other checks. This means the user can bypass the CAP_NET_ADMIN check on AIROGWEPKTMP and AIROGWEPKNV. Fix it by moving the CAP_NET_ADMIN check out of the command handling and instead do it later based on the ridcode. That way regardless of whether the ridcode is set via AIROGWEPKTMP or AIROGWEPKNV, or passed in using AIRORID, we always do the CAP_NET_ADMIN check. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29airo: Fix possible info leak in AIROOLDIOCTL/SIOCDEVPRIVATEMichael Ellerman1-1/+1
[ Upstream commit d6bce2137f5d6bb1093e96d2f801479099b28094 ] The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl(). The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command and a length. Some of the commands are handled in readrids(), which kmalloc()'s a buffer of RIDSIZE (2048) bytes. That buffer is then passed to PC4500_readrid(), which has two cases. The else case does some setup and then reads up to RIDSIZE bytes from the hardware into the kmalloc()'ed buffer. Here len == RIDSIZE, pBuf is the kmalloc()'ed buffer: // read the rid length field bap_read(ai, pBuf, 2, BAP1); // length for remaining part of rid len = min(len, (int)le16_to_cpu(*(__le16*)pBuf)) - 2; ... // read remainder of the rid rc = bap_read(ai, ((__le16*)pBuf)+1, len, BAP1); PC4500_readrid() then returns to readrids() which does: len = comp->len; if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) { Where comp->len is the user controlled length field. So if the "rid length field" returned by the hardware is < 2048, and the user requests 2048 bytes in comp->len, we will leak the previous contents of the kmalloc()'ed buffer to userspace. Fix it by kzalloc()'ing the buffer. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29tun: add mutex_unlock() call and napi.skb clearing in tun_get_user()Eric Dumazet1-0/+4
[ Upstream commit 1efba987c48629c0c64703bb4ea76ca1a3771d17 ] If both IFF_NAPI_FRAGS mode and XDP are enabled, and the XDP program consumes the skb, we need to clear the napi.skb (or risk a use-after-free) and release the mutex (or risk a deadlock) WARNING: lock held when returning to user space! 5.5.0-rc6-syzkaller #0 Not tainted ------------------------------------------------ syz-executor.0/455 is leaving the kernel with locks still held! 1 lock held by syz-executor.0/455: #0: ffff888098f6e748 (&tfile->napi_mutex){+.+.}, at: tun_get_user+0x1604/0x3fc0 drivers/net/tun.c:1835 Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Petar Penkov <ppenkov@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29net: usb: lan78xx: Add .ndo_features_checkJames Hughes1-0/+15
[ Upstream commit ce896476c65d72b4b99fa09c2f33436b4198f034 ] As reported by Eric Dumazet, there are still some outstanding cases where the driver does not handle TSO correctly when skb's are over a certain size. Most cases have been fixed, this patch should ensure that forwarded SKB's that are greater than MAX_SINGLE_PACKET_SIZE - TX_OVERHEAD are software segmented and handled correctly. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEMMichael Ellerman1-0/+2
[ Upstream commit 3546d8f1bbe992488ed91592cf6bf76e7114791a = The cxgb3 driver for "Chelsio T3-based gigabit and 10Gb Ethernet adapters" implements a custom ioctl as SIOCCHIOCTL/SIOCDEVPRIVATE in cxgb_extension_ioctl(). One of the subcommands of the ioctl is CHELSIO_GET_MEM, which appears to read memory directly out of the adapter and return it to userspace. It's not entirely clear what the contents of the adapter memory contains, but the assumption is that it shouldn't be accessible to all users. So add a CAP_NET_ADMIN check to the CHELSIO_GET_MEM case. Put it after the is_offload() check, which matches two of the other subcommands in the same function which also check for is_offload() and CAP_NET_ADMIN. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29net: bcmgenet: Use netif_tx_napi_add() for TX NAPIFlorian Fainelli1-2/+2
[ Upstream commit 148965df1a990af98b2c84092c2a2274c7489284 ] Before commit 7587935cfa11 ("net: bcmgenet: move NAPI initialization to ring initialization") moved the code, this used to be netif_tx_napi_add(), but we lost that small semantic change in the process, restore that. Fixes: 7587935cfa11 ("net: bcmgenet: move NAPI initialization to ring initialization") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29gtp: make sure only SOCK_DGRAM UDP sockets are acceptedEric Dumazet1-4/+6
[ Upstream commit 940ba14986657a50c15f694efca1beba31fa568f ] A malicious user could use RAW sockets and fool GTP using them as standard SOCK_DGRAM UDP sockets. BUG: KMSAN: uninit-value in udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline] BUG: KMSAN: uninit-value in setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85 CPU: 0 PID: 11262 Comm: syz-executor613 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline] setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85 gtp_encap_enable_socket+0x37f/0x5a0 drivers/net/gtp.c:827 gtp_encap_enable drivers/net/gtp.c:844 [inline] gtp_newlink+0xfb/0x1e50 drivers/net/gtp.c:666 __rtnl_newlink net/core/rtnetlink.c:3305 [inline] rtnl_newlink+0x2973/0x3920 net/core/rtnetlink.c:3363 rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x441359 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff1cd0ac28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441359 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000246 R12: 00000000004020d0 R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags+0x3c/0x90 mm/kmsan/kmsan.c:144 kmsan_internal_alloc_meta_for_pages mm/kmsan/kmsan_shadow.c:307 [inline] kmsan_alloc_page+0x12a/0x310 mm/kmsan/kmsan_shadow.c:336 __alloc_pages_nodemask+0x57f2/0x5f60 mm/page_alloc.c:4800 alloc_pages_current+0x67d/0x990 mm/mempolicy.c:2207 alloc_pages include/linux/gfp.h:534 [inline] alloc_slab_page+0x111/0x12f0 mm/slub.c:1511 allocate_slab mm/slub.c:1656 [inline] new_slab+0x2bc/0x1130 mm/slub.c:1722 new_slab_objects mm/slub.c:2473 [inline] ___slab_alloc+0x1533/0x1f30 mm/slub.c:2624 __slab_alloc mm/slub.c:2664 [inline] slab_alloc_node mm/slub.c:2738 [inline] slab_alloc mm/slub.c:2783 [inline] kmem_cache_alloc+0xb23/0xd70 mm/slub.c:2788 sk_prot_alloc+0xf2/0x620 net/core/sock.c:1597 sk_alloc+0xf0/0xbe0 net/core/sock.c:1657 inet_create+0x7c7/0x1370 net/ipv4/af_inet.c:321 __sock_create+0x8eb/0xf00 net/socket.c:1420 sock_create net/socket.c:1471 [inline] __sys_socket+0x1a1/0x600 net/socket.c:1513 __do_sys_socket net/socket.c:1522 [inline] __se_sys_socket+0x8d/0xb0 net/socket.c:1520 __x64_sys_socket+0x4a/0x70 net/socket.c:1520 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pablo Neira <pablo@netfilter.org> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29can, slip: Protect tty->disc_data in write_wakeup and close with RCURichard Palethorpe2-4/+20
[ Upstream commit 0ace17d56824165c7f4c68785d6b58971db954dd ] write_wakeup can happen in parallel with close/hangup where tty->disc_data is set to NULL and the netdevice is freed thus also freeing disc_data. write_wakeup accesses disc_data so we must prevent close from freeing the netdev while write_wakeup has a non-NULL view of tty->disc_data. We also need to make sure that accesses to disc_data are atomic. Which can all be done with RCU. This problem was found by Syzkaller on SLCAN, but the same issue is reproducible with the SLIP line discipline using an LTP test based on the Syzkaller reproducer. A fix which didn't use RCU was posted by Hillf Danton. Fixes: 661f7fda21b1 ("slip: Fix deadlock in write_wakeup") Fixes: a8e83b17536a ("slcan: Port write_wakeup deadlock fix from slip") Reported-by: syzbot+017e491ae13c0068598a@syzkaller.appspotmail.com Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tyler Hall <tylerwhall@gmail.com> Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: syzkaller@googlegroups.com Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26mt76: mt76u: rely on usb_interface instead of usb_devLorenzo Bianconi4-6/+13
[ Upstream commit 80df01f4dc79abbed724bbe0851cab3fe8ad9d99 ] usb drivers are supposed to communicate using usb_interface instead mt76x{0,2}u is now registering through usb_device. Fix it by passing usb_intf device to mt76_alloc_device routine. Fixes: 112f980ac8926 ("mt76usb: use usb_dev private data") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-By: Zero_Chaos <sidhayn@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26net: axienet: Fix error return code in axienet_probe()Wei Yongjun1-4/+0
[ Upstream commit eb34e98baf4ce269423948dacefea6747e963b48 ] In the DMA memory resource get failed case, the error is not set and 0 will be returned. Fix it by removing redundant check since devm_ioremap_resource() will handle it. Fixes: 28ef9ebdb64c ("net: axienet: make use of axistream-connected attribute optional") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26rt2800: remove errornous duplicate conditionDaniel Golle1-4/+1
[ Upstream commit a1f7c2cabf701a17b1a05d6526bbdadc3d05e05c ] On 2019-10-28 06:07, wbob wrote: > Hello Roman, > > while reading around drivers/net/wireless/ralink/rt2x00/rt2800lib.c > I stumbled on what I think is an edit of yours made in error in march > 2017: > > https://github.com/torvalds/linux/commit/41977e86#diff-dae5dc10da180f3b055809a48118e18aR5281 > > RT6352 in line 5281 should not have been introduced as the "else if" > below line 5291 can then not take effect for a RT6352 device. Another > possibility is for line 5291 to be not for RT6352, but this seems > very unlikely. Are you able to clarify still after this substantial time? > > 5277: static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) > ... > 5279: } else if (rt2x00_rt(rt2x00dev, RT5390) || > 5280: rt2x00_rt(rt2x00dev, RT5392) || > 5281: rt2x00_rt(rt2x00dev, RT6352)) { > ... > 5291: } else if (rt2x00_rt(rt2x00dev, RT6352)) { > ... Hence remove errornous line 5281 to make the driver actually execute the correct initialization routine for MT7620 chips. As it was requested by Stanislaw Gruszka remove setting values of MIMO_PS_CFG and TX_PIN_CFG. MIMO_PS_CFG is responsible for MIMO power-safe mode (which is disabled), hence we can drop setting it. TX_PIN_CFG is set correctly in other functions, and as setting this value breaks some devices, rather don't set it here during init, but only modify it later on. Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Reported-by: wbob <wbob@jify.de> Reported-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26hv_netvsc: flag software created hash valueStephen Hemminger1-4/+3
[ Upstream commit df9f540ca74297a84bafacfa197e9347b20beea5 ] When the driver needs to create a hash value because it was not done at higher level, then the hash should be marked as a software not hardware hash. Fixes: f72860afa2e3 ("hv_netvsc: Exclude non-TCP port numbers from vRSS hashing") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26dpaa_eth: avoid timestamp read on error pathsMadalin Bucur1-7/+10
[ Upstream commit 9a4f4f3a894ff4487f5597b7aabba9432b238292 ] The dpaa_cleanup_tx_fd() function is called by the frame transmit confirmation callback but also on several error paths. This function is reading the transmit timestamp value. Avoid reading an invalid timestamp value on the error paths. Fixes: 4664856e9ca2 ("dpaa_eth: add support for hardware timestamping") Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26dpaa_eth: perform DMA unmapping before readMadalin Bucur1-15/+17
[ Upstream commit c70fd3182caef014e6c628b412f81aa57a3ef9e4 ] DMA unmapping is required before accessing the HW provided timestamping information. Fixes: 4664856e9ca2 ("dpaa_eth: add support for hardware timestamping") Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26net: netsec: Correct dma sync for XDP_TX framesIlias Apalodimas1-2/+2
[ Upstream commit d9496f3ecfe4823c1e12aecbcc29220147fa012c ] bpf_xdp_adjust_head() can change the frame boundaries. Account for the potential shift properly by calculating the new offset before syncing the buffer to the device for XDP_TX Fixes: ba2b232108d3 ("net: netsec: add XDP support") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26dpaa2-eth: Fix minor bug in ethtool stats reportingIoana Radulescu1-1/+1
[ Upstream commit 4b177f065e7ec37399b18e18412a8c7b75f8f299 ] Don't print error message for a successful return value. Fixes: d84c3a4ded96 ("dpaa2-eth: Add new DPNI statistics counters") Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26rtw88: fix error handling when setup efuse infoPing-Ke Shih1-5/+6
commit f4268729eb1eefe23f6746849c1b5626d9030532 upstream. Disable efuse if the efuse is enabled when we failed to setup the efuse information, otherwise the hardware will not turn off. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26rtw88: fix beaconing mode rsvd_page memory violation issueYan-Hsuan Chuang1-9/+43
commit c3594559f49c601d410dee4b767c3536a5535bfd upstream. When downloading the reserved page, the first page always contains a beacon for the firmware to reference. For non-beaconing modes such as station mode, also put a blank skb with length=1. And for the beaconing modes, driver will get a real beacon with a length approximate to the page size. But as the beacon is always put at the first page, it does not need a tx_desc, because the TX path will generate one when TXing the reserved page to the hardware. So we could allocate a buffer with a size smaller than the reserved page, when using memcpy() to copy the content of reserved page to the buffer, the over-sized reserved page will violate the kernel memory. To fix it, add the tx_desc before memcpy() the reserved packets to the buffer, then we can get SKBs with correct length when counting the pages in total. And for page 0, count the extra tx_desc_sz that the TX path will generate. This way, the first beacon that allocated without tx_desc can be counted with the extra tx_desc_sz to get actual pages it requires. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26ice: fix stack leakageJesse Brandeburg1-2/+1
commit 949375de945f7042df2b6488228a1a2b36e69f35 upstream. In the case of an invalid virtchannel request the driver would return uninitialized data to the VF from the PF stack which is a bug. Fix by initializing the stack variable earlier in the function before any return paths can be taken. Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26mt7601u: fix bbp version check in mt7601u_wait_bbp_readyLorenzo Bianconi1-1/+1
commit 15e14f76f85f4f0eab3b8146e1cd3c58ce272823 upstream. Fix bbp ready check in mt7601u_wait_bbp_ready. The issue is reported by coverity with the following error: Logical vs. bitwise operator The expression's value does not depend on the operands; inadvertent use of the wrong operator is a likely logic error. Addresses-Coverity-ID: 1309441 ("Logical vs. bitwise operator") Fixes: c869f77d6abb ("add mt7601u driver") Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26mt76: mt76u: fix endpoint definition orderLorenzo Bianconi1-1/+1
commit 23cb16d2ccb5f819d7acff602e5a153157bf2884 upstream. Even if they are not currently used fix BK/BE endpoint definition order. Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26net: phy: broadcom: Fix RGMII delays configuration for BCM54210EFlorian Fainelli1-8/+3
commit fea7fda7f50a6059220f83251e70709e45cc8040 upstream. Commit 0fc9ae107669 ("net: phy: broadcom: add support for BCM54210E") added support for BCM54210E but also unconditionally cleared the RXC to RXD skew and the TXD to TXC skew, thus only making PHY_INTERFACE_MODE_RGMII a possible configuration. Use bcm54xx_config_clock_delay() which correctly sets the registers depending on the 4 possible PHY interface values that exist for RGMII. Fixes: 0fc9ae107669 ("net: phy: broadcom: add support for BCM54210E") Reported-by: Manasa Mudireddy <manasa.mudireddy@broadcom.com> Reported-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26net/mlx5e: Fix free peer_flow when refcount is 0Roi Dayan1-2/+5
commit eb252c3a24fc5856fa62140c2f8269ddce6ce4e5 upstream. It could be neigh update flow took a refcount on peer flow so sometimes we cannot release peer flow even if parent flow is being freed now. Fixes: 5a7e5bcb663d ("net/mlx5e: Extend tc flow struct with reference counter") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23rtw88: fix potential read outside array boundaryTzu-En Huang3-11/+19
commit 18a0696e85fde169e0109aa61d0505b2b935b59d upstream. The level of cckpd is from 0 to 4, and it is the index of array pd_lvl[] and cs_lvl[]. However, the length of both arrays are 4, which is smaller than the possible maximum input index. Enumerate cck level to make sure the max level will not be wrong if new level is added in future. Fixes: 479c4ee931a6 ("rtw88: add dynamic cck pd mechanism") Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23cw1200: Fix a signedness bug in cw1200_load_firmware()Dan Carpenter1-3/+3
commit 4a50d454502f1401171ff061a5424583f91266db upstream. The "priv->hw_type" is an enum and in this context GCC will treat it as an unsigned int so the error handling will never trigger. Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: stmmac: tc: Do not setup flower filtering if RSS is enabledJose Abreu1-0/+4
commit 7bd754c47dd3ad1b048c9641294b0234fcce2c58 upstream. RSS, when enabled, will bypass the L3 and L4 filtering causing it not to work. Add a check before trying to setup the filters. Fixes: 425eabddaf0f ("net: stmmac: Implement L3/L4 Filters using TC Flower") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: stmmac: selftests: Update status when disabling RSSJose Abreu1-6/+14
commit e715d74504352968cf24ac95476706bc911a69cd upstream. We are disabling RSS on HW but not updating the internal private status to the 'disabled' state. This is needed for next tc commit that will check if RSS is disabled before trying to apply filters. Fixes: 4647e021193d ("net: stmmac: selftests: Add selftest for L3/L4 Filters") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: stmmac: selftests: Mark as fail when received VLAN ID != expectedJose Abreu1-1/+5
commit d39b68e5a736afa67d2e9cfb158efdd237d99dbd upstream. When the VLAN ID does not match the expected one it means filter failed in HW. Fix it. Fixes: 94e18382003c ("net: stmmac: selftests: Add selftest for VLAN TX Offload") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: stmmac: selftests: Make it work in Synopsys AXS101 boardsJose Abreu1-9/+11
commit 0b9f932edc1a461933bfde08e620362e2190e0dd upstream. Synopsys AXS101 boards do not support unaligned memory loads or stores. Change the selftests mechanism to explicity: - Not add extra alignment in TX SKB - Use the unaligned version of ether_addr_equal() Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23mlxsw: spectrum_qdisc: Include MC TCs in Qdisc countersPetr Machata1-7/+23
commit 85005b82e59fa7bb7388b12594ab2067bf73d66c upstream. mlxsw configures Spectrum in such a way that BUM traffic is passed not through its nominal traffic class TC, but through its MC counterpart TC+8. However, when collecting statistics, Qdiscs only look at the nominal TC and ignore the MC TC. Add two helpers to compute the value for logical TC from the constituents, one for backlog, the other for tail drops. Use them throughout instead of going through the xstats pointer directly. Counters for TX bytes and packets are deduced from packet priority counters, and therefore already include BUM traffic. wred_drop counter is irrelevant on MC TCs, because RED is not enabled on them. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23mlxsw: spectrum: Wipe xstats.backlog of down portsPetr Machata1-0/+13
commit ca7609ff3680c51d6c29897f3117aa2ad904f92a upstream. Per-port counter cache used by Qdiscs is updated periodically, unless the port is down. The fact that the cache is not updated for down ports is no problem for most counters, which are relative in nature. However, backlog is absolute in nature, and if there is a non-zero value in the cache around the time that the port goes down, that value just stays there. This value then leaks to offloaded Qdiscs that report non-zero backlog even if there (obviously) is no traffic. The HW does not keep backlog of a downed port, so do likewise: as the port goes down, wipe the backlog value from xstats. Fixes: 075ab8adaf4e ("mlxsw: spectrum: Collect tclass related stats periodically") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23mlxsw: spectrum: Do not modify cloned SKBs during xmitIdo Schimmel1-12/+6
commit 2da51ce75d86ab1f7770ac1391a9a1697ddaa60c upstream. The driver needs to prepend a Tx header to each packet it is transmitting. The header includes information such as the egress port and traffic class. The addition of the header requires the driver to modify the SKB's header and therefore it must not be shared. Otherwise, we risk hitting various race conditions. For example, when a packet is flooded (cloned) by the bridge driver to two switch ports swp1 and swp2: t0 - mlxsw_sp_port_xmit() is called for swp1. Tx header is prepended with swp1's port number t1 - mlxsw_sp_port_xmit() is called for swp2. Tx header is prepended with swp2's port number, overwriting swp1's port number t2 - The device processes data buffer from t0. Packet is transmitted via swp2 t3 - The device processes data buffer from t1. Packet is transmitted via swp2 Usually, the device is fast enough and transmits the packet before its Tx header is overwritten, but this is not the case in emulated environments. Fix this by making sure the SKB's header is writable by calling skb_cow_head(). Since the function ensures we have headroom to push the Tx header, the check further in the function can be removed. v2: * Use skb_cow_head() instead of skb_unshare() as suggested by Jakub * Remove unnecessary check regarding headroom Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23sh_eth: check sh_eth_cpu_data::dual_port when dumping registersSergei Shtylyov1-17/+21
commit 3249b1e442a1be1a6b9f1026785b519d1443f807 upstream. When adding the sh_eth_cpu_data::dual_port flag I forgot to add the flag checks to __sh_eth_get_regs(), causing the non-existing TSU registers to be dumped by 'ethtool' on the single port Ether controllers having TSU... Fixes: a94cf2a614f8 ("sh_eth: fix TSU init on SH7734/R8A7740") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23i40e: prevent memory leak in i40e_setup_macvlansNavid Emamdoost1-0/+1
[ Upstream commit 27d461333459d282ffa4a2bdb6b215a59d493a8f ] In i40e_setup_macvlans if i40e_setup_channel fails the allocated memory for ch should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: dsa: bcm_sf2: Configure IMP port for 2Gb/secFlorian Fainelli1-1/+1
[ Upstream commit 8f1880cbe8d0d49ebb7e9ae409b3b96676e5aa97 ] With the implementation of the system reset controller we lost a setting that is currently applied by the bootloader and which configures the IMP port for 2Gb/sec, the default is 1Gb/sec. This is needed given the number of ports and applications we expect to run so bring back that setting. Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: dsa: sja1105: Don't error out on disabled ports with no phy-modeVladimir Oltean1-1/+1
[ Upstream commit 27afe0d34e9121a3d61cc0af9b17c2542dadde24 ] The sja1105_parse_ports_node function was tested only on device trees where all ports were enabled. Fix this check so that the driver continues to probe only with the ports where status is not "disabled", as expected. Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: systemport: Fixed queue mapping in internal ring mapFlorian Fainelli1-3/+4
[ Upstream commit 5a9ef19454cd5daec8041bc7c3c11deb7456d9a0 ] We would not be transmitting using the correct SYSTEMPORT transmit queue during ndo_select_queue() which looks up the internal TX ring map because while establishing the mapping we would be off by 4, so for instance, when we populate switch port mappings we would be doing: switch port 0, queue 0 -> ring index #0 switch port 0, queue 1 -> ring index #1 ... switch port 0, queue 3 -> ring index #3 switch port 1, queue 0 -> ring index #8 (4 + 4 * 1) ... instead of using ring index #4. This would cause our ndo_select_queue() to use the fallback queue mechanism which would pick up an incorrect ring for that switch port. Fix this by using the correct switch queue number instead of SYSTEMPORT queue number. Fixes: 25c440704661 ("net: systemport: Simplify queue mapping logic") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net: ethernet: ave: Avoid lockdep warningKunihiko Hayashi1-7/+13
[ Upstream commit 82d5d6a638cbd12b7dfe8acafd9efd87a656cc06 ] When building with PROVE_LOCKING=y, lockdep shows the following dump message. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. ... Calling device_set_wakeup_enable() directly occurs this issue, and it isn't necessary for initialization, so this patch creates internal function __ave_ethtool_set_wol() and replaces with this in ave_init() and ave_resume(). Fixes: 7200f2e3c9e2 ("net: ethernet: ave: Set initial wol state to disabled") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.Michael Chan3-4/+7
[ Upstream commit d061b2411d5f3d6272187ab734ce0640827fca13 ] DSN read can fail, for example on a kdump kernel without PCIe extended config space support. If DSN read fails, don't set the BNXT_FLAG_DSN_VALID flag and continue loading. Check the flag to see if the stored DSN is valid before using it. Only VF reps creation should fail without valid DSN. Fixes: 03213a996531 ("bnxt: move bp->switch_id initialization to PF probe") Reported-by: Marc Smith <msmith626@gmail.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23bnxt_en: Fix ipv6 RFS filter matching logic.Michael Chan1-5/+17
[ Upstream commit 6fc7caa84e713f7627e171ab1e7c4b5be0dc9b3d ] Fix bnxt_fltr_match() to match ipv6 source and destination addresses. The function currently only checks ipv4 addresses and will not work corrently on ipv6 filters. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23bnxt_en: Fix NTUPLE firmware command failures.Michael Chan1-3/+0
[ Upstream commit ceb3284c588eee5ea256c70e4d8d7cf399b8134e ] The NTUPLE related firmware commands are sent to the wrong firmware channel, causing all these commands to fail on new firmware that supports the new firmware channel. Fix it by excluding the 3 NTUPLE firmware commands from the list for the new firmware channel. Fixes: 760b6d33410c ("bnxt_en: Add support for 2nd firmware message channel.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23r8152: add missing endpoint sanity checkJohan Hovold1-0/+3
[ Upstream commit 86f3f4cd53707ceeec079b83205c8d3c756eca93 ] Add missing endpoint sanity check to probe in order to prevent a NULL-pointer dereference (or slab out-of-bounds access) when retrieving the interrupt-endpoint bInterval on ndo_open() in case a device lacks the expected endpoints. Fixes: 40a82917b1d3 ("net/usb/r8152: enable interrupt transfer") Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23net/wan/fsl_ucc_hdlc: fix out of bounds write on array utdm_infoColin Ian King1-1/+1
[ Upstream commit ddf420390526ede3b9ff559ac89f58cb59d9db2f ] Array utdm_info is declared as an array of MAX_HDLC_NUM (4) elements however up to UCC_MAX_NUM (8) elements are potentially being written to it. Currently we have an array out-of-bounds write error on the last 4 elements. Fix this by making utdm_info UCC_MAX_NUM elements in size. Addresses-Coverity: ("Out-of-bounds write") Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 21:46:44 +0300