summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-06-30net: qed: fix excessive QM ILT lines consumptionAlexander Lobakin1-1/+1
[ Upstream commit d434d02f7e7c24c721365fd594ed781acb18e0da ] This is likely a copy'n'paste mistake. The amount of ILT lines to reserve for a single VF was being multiplied by the total VFs count. This led to a huge redundancy in reservation and potential lines drainouts. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30net: qed: fix NVMe login fails over VFsAlexander Lobakin1-5/+18
[ Upstream commit ccd7c7ce167a21dbf2b698ffcf00f11d96d44f9b ] 25ms sleep cycles in waiting for PF response are excessive and may lead to different timeout failures. Start to wait with short udelays, and in most cases polling will end here. If the time was not sufficient, switch to msleeps. usleep_range() may go far beyond 100us depending on platform and tick configuration, hence atomic udelays for consistency. Also add explicit DMA barriers since 'done' always comes from a shared request-response DMA pool, and note that in the comment nearby. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30net: qede: stop adding events on an already destroyed workqueueAlexander Lobakin1-1/+2
[ Upstream commit 4079c7f7a2a00ab403c177ce723b560de59139c3 ] Set rdma_wq pointer to NULL after destroying the workqueue and check for it when adding new events to fix crashes on driver unload. Fixes: cee9fbd8e2e9 ("qede: Add qedr framework") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30net: qed: fix async event callbacks unregisteringAlexander Lobakin3-5/+7
[ Upstream commit 31333c1a2521ff4b4ceb0c29de492549cd4a8de3 ] qed_spq_unregister_async_cb() should be called before qed_rdma_info_free() to avoid crash-spawning uses-after-free. Instead of calling it from each subsystem exit code, do it in one place on PF down. Fixes: 291d57f67d24 ("qed: Fix rdma_info structure allocation") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30net: phy: Check harder for errors in get_phy_id()Florian Fainelli1-2/+4
[ Upstream commit b2ffc75e2e990b09903f9d15ccd53bc5f3a4217c ] Commit 02a6efcab675 ("net: phy: allow scanning busses with missing phys") added a special condition to return -ENODEV in case -ENODEV or -EIO was returned from the first read of the MII_PHYSID1 register. In case the MDIO bus data line pull-up is not strong enough, the MDIO bus controller will not flag this as a read error. This can happen when a pluggable daughter card is not connected and weak internal pull-ups are used (since that is the only option, otherwise the pins are floating). The second read of MII_PHYSID2 will be correctly flagged an error though, but now we will return -EIO which will be treated as a hard error, thus preventing MDIO bus scanning loops to continue succesfully. Apply the same logic to both register reads, thus allowing the scanning logic to proceed. Fixes: 02a6efcab675 ("net: phy: allow scanning busses with missing phys") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezesDavid Christensen1-2/+2
[ Upstream commit 3a2656a211caf35e56afc9425e6e518fa52f7fbc ] The driver function tg3_io_error_detected() calls napi_disable twice, without an intervening napi_enable, when the number of EEH errors exceeds eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock. Add check for pcierr_recovery which skips code already executed for the "Frozen" state. Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30rocker: fix incorrect error handling in dma_rings_initAditya Pakki1-2/+2
[ Upstream commit 58d0c864e1a759a15c9df78f50ea5a5c32b3989e ] In rocker_dma_rings_init, the goto blocks in case of errors caused by the functions rocker_dma_cmd_ring_waits_alloc() and rocker_dma_ring_create() are incorrect. The patch fixes the order consistent with cleanup in rocker_dma_rings_fini(). Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30net: usb: ax88179_178a: fix packet alignment paddingJeremy Kerr1-5/+6
[ Upstream commit e869e7a17798d85829fa7d4f9bbe1eebd4b2d3f6 ] Using a AX88179 device (0b95:1790), I see two bytes of appended data on every RX packet. For example, this 48-byte ping, using 0xff as a payload byte: 04:20:22.528472 IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 2447, seq 1, length 64 0x0000: 000a cd35 ea50 000a cd35 ea4f 0800 4500 0x0010: 0054 c116 4000 4001 f63e c0a8 0101 c0a8 0x0020: 0102 0800 b633 098f 0001 87ea cd5e 0000 0x0030: 0000 dcf2 0600 0000 0000 ffff ffff ffff 0x0040: ffff ffff ffff ffff ffff ffff ffff ffff 0x0050: ffff ffff ffff ffff ffff ffff ffff ffff 0x0060: ffff 961f Those last two bytes - 96 1f - aren't part of the original packet. In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte 'alignment pseudo header' from the start of the packet, and sets the length from a per-packet field populated by hardware. It looks like that length field *includes* the 2-byte header; the current driver assumes that it's excluded. This change trims the 2-byte alignment header after we've set the packet length, so the resulting packet length is correct. While we're moving the comment around, this also fixes the spelling of 'pseudo'. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30mvpp2: ethtool rxtx stats fixSven Auhagen1-2/+2
[ Upstream commit cc970925feb9a38c2f0d34305518e00a3084ce85 ] The ethtool rx and tx queue statistics are reporting wrong values. Fix reading out the correct ones. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30ibmveth: Fix max MTU limitThomas Falcon1-1/+1
[ Upstream commit 5948378b26d89f8aa5eac37629dbd0616ce8d7a7 ] The max MTU limit defined for ibmveth is not accounting for virtual ethernet buffer overhead, which is twenty-two additional bytes set aside for the ethernet header and eight additional bytes of an opaque handle reserved for use by the hypervisor. Update the max MTU to reflect this overhead. Fixes: d894be57ca92 ("ethernet: use net core MTU range checking in more drivers") Fixes: 110447f8269a ("ethernet: fix min/max MTU typos") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30geneve: allow changing DF behavior after creationSabrina Dubroca1-0/+1
[ Upstream commit 56c09de347e40804fc8dad155272fb9609e0a97b ] Currently, trying to change the DF parameter of a geneve device does nothing: # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> # ip link set geneve1 type geneve id 1 df unset # ip -d link show geneve1 14: geneve1: <snip> link/ether <snip> geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip> We just need to update the value in geneve_changelink. Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30enetc: Fix tx rings bitmap iteration range, irq handlingClaudiu Manoil1-2/+2
[ Upstream commit 0574e2000fc3103cbc69ba82ec1175ce171fdf5e ] The rings bitmap of an interrupt vector encodes which of the device's rings were assigned to that interrupt vector. Hence the iteration range of the tx rings bitmap (for_each_set_bit()) should be the total number of Tx rings of that netdevice instead of the number of rings assigned to the interrupt vector. Since there are 2 cores, and one interrupt vector for each core, the number of rings asigned to an interrupt vector is half the number of available rings. The impact of this error is that the upper half of the tx rings could still generate interrupts during napi polling. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24net: octeon: mgmt: Repair filling of RX ringAlexander Sverdlin1-0/+5
commit 0c34bb598c510e070160029f34efeeb217000f8d upstream. The removal of mips_swiotlb_ops exposed a problem in octeon_mgmt Ethernet driver. mips_swiotlb_ops had an mb() after most of the operations and the removal of the ops had broken the receive functionality of the driver. My code inspection has shown no other places except octeon_mgmt_rx_fill_ring() where an explicit barrier would be obviously missing. The latter function however has to make sure that "ringing the bell" doesn't happen before RX ring entry is really written. The patch has been successfully tested on Octeon II. Fixes: a999933db9ed ("MIPS: remove mips_swiotlb_ops") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24e1000e: Do not wake up the system via WOL if device wakeup is disabledChen Yu1-4/+10
commit 6bf6be1127f7e6d4bf39f84d56854e944d045d74 upstream. Currently the system will be woken up via WOL(Wake On LAN) even if the device wakeup ability has been disabled via sysfs: cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup disabled The system should not be woken up if the user has explicitly disabled the wake up ability for this device. This patch clears the WOL ability of this network device if the user has disabled the wake up ability in sysfs. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver") Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24net/mlx5: DR, Fix freeing in dr_create_rc_qp()Denis Efremov1-1/+1
[ Upstream commit 47a357de2b6b706af3c9471d5042f9ba8907031e ] Variable "in" in dr_create_rc_qp() is allocated with kvzalloc() and should be freed with kvfree(). Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24mvpp2: remove module bugfixSven Auhagen1-2/+5
[ Upstream commit 807eaf99688ce162a98a7501477644782d4af098 ] The remove function does not destroy all BM Pools when per cpu pool is active. When reloading the mvpp2 as a module the BM Pools are still active in hardware and due to the bug have twice the size now old + new. This eventually leads to a kernel crash. v2: * add Fixes tag Fixes: 7d04b0b13b11 ("mvpp2: percpu buffers") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24bnxt_en: Return from timer if interface is not in open state.Vasundhara Volam1-1/+1
[ Upstream commit e000940473d1423a42ef9c823fb23ccffe3f07ea ] This will avoid many uneccessary error logs when driver or firmware is in reset. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24iavf: fix speed reporting over virtchnlBrett Creeley4-21/+120
[ Upstream commit e0ef26fbe2b0c62f42ba7667076dc38b693b6fb8 ] Link speeds are communicated over virtchnl using an enum virtchnl_link_speed. Currently, the highest link speed is 40Gbps which leaves us unable to reflect some speeds that an ice VF is capable of. This causes link speed to be misreported on the iavf driver. Allow for communicating link speeds using Mbps so that the proper speed can be reported for an ice VF. Moving away from the enum allows us to communicate future speed changes without requiring a new enum to be added. In order to support communicating link speeds over virtchnl in Mbps the following functionality was added: - Added u32 link_speed_mbps in the iavf_adapter structure. - Added the macro ADV_LINK_SUPPORT(_a) to determine if the VF driver supports communicating link speeds in Mbps. - Added the function iavf_get_vpe_link_status() to fill the correct link_status in the event_data union based on the ADV_LINK_SUPPORT(_a) macro. - Added the function iavf_set_adapter_link_speed_from_vpe() to determine whether or not to fill the u32 link_speed_mbps or enum virtchnl_link_speed link_speed field in the iavf_adapter structure based on the ADV_LINK_SUPPORT(_a) macro. - Do not free vf_res in iavf_init_get_resources() as vf_res will be accessed in iavf_get_link_ksettings(); memset to 0 instead. This memory is subsequently freed in iavf_remove(). Fixes: 7c710869d64e ("ice: Add handlers for VF netdevice operations") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Sergey Nemov <sergey.nemov@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24net: marvell: Fix OF_MDIO config checkDan Murphy1-1/+1
[ Upstream commit 5cd119d9a05f1c1a08778a7305b4ca0f16bc1e20 ] When CONFIG_OF_MDIO is set to be a module the code block is not compiled. Use the IS_ENABLED macro that checks for both built in as well as module. Fixes: cf41a51db8985 ("of/phylib: Use device tree properties to initialize Marvell PHYs.") Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24geneve: change from tx_error to tx_dropped on missing metadataJiri Benc1-3/+4
[ Upstream commit 9d149045b3c0e44c049cdbce8a64e19415290017 ] If the geneve interface is in collect_md (external) mode, it can't send any packets submitted directly to its net interface, as such packets won't have metadata attached. This is expected. However, the kernel itself sends some packets to the interface, most notably, IPv6 DAD, IPv6 multicast listener reports, etc. This is not wrong, as tunnel metadata can be specified in routing table (although technically, that has never worked for IPv6, but hopefully will be fixed eventually) and then the interface must correctly participate in IPv6 housekeeping. The problem is that any such attempt increases the tx_error counter. Just bringing up a geneve interface with IPv6 enabled is enough to see a number of tx_errors. That causes confusion among users, prompting them to find a network error where there is none. Change the counter used to tx_dropped. That better conveys the meaning (there's nothing wrong going on, just some packets are getting dropped) and hopefully will make admins panic less. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24net: dsa: lantiq_gswip: fix and improve the unsupported interface errorMartin Blumenstingl1-1/+2
[ Upstream commit 4d3da2d8d91f66988a829a18a0ce59945e8ae4fb ] While trying to use the lantiq_gswip driver on one of my boards I made a mistake when specifying the phy-mode (because the out-of-tree driver wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the following error is printed multiple times: Unsupported interface: 3 While it gives at least a hint at what may be wrong it is not very user friendly. Print the human readable phy-mode and also which port is configured incorrectly (this hardware supports ports 0..6) to improve the cases where someone made a mistake. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24yam: fix possible memory leak in yam_init_driverWang Hai1-0/+1
[ Upstream commit 98749b7188affbf2900c2aab704a8853901d1139 ] If register_netdev(dev) fails, free_netdev(dev) needs to be called, otherwise a memory leak will occur. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24Merge tag 'v5.4.48' into dev-5.4Joel Stanley79-209/+448
This is the 5.4.48 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-06-22igb: Report speed and duplex as unknown when device is runtime suspendedKai-Heng Feng1-1/+2
commit 165ae7a8feb53dc47fb041357e4b253bfc927cf9 upstream. igb device gets runtime suspended when there's no link partner. We can't get correct speed under that state: $ cat /sys/class/net/enp3s0/speed 1000 In addition to that, an error can also be spotted in dmesg: [ 385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost Since device can only be runtime suspended when there's no link partner, we can skip reading register and let the following logic set speed and duplex with correct status. The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks. However, for this particular issue, begin() calls igb_runtime_resume() , which tries to rtnl_lock() while the lock is already hold by upper ethtool layer. So let's take this approach until the igb_runtime_resume() no longer needs to hold rtnl_lock. CC: stable <stable@vger.kernel.org> Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22b43_legacy: Fix connection problem with WPA3Larry Finger1-0/+1
commit 6a29d134c04a8acebb7a95251acea7ad7abba106 upstream. Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43legacy did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43legacy will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200526155909.5807-3-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22b43: Fix connection problem with WPA3Larry Finger1-1/+1
commit 75d057bda1fbca6ade21378aa45db712e5f7d962 upstream. Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43 did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43 will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Reported-and-tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200526155909.5807-2-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22b43legacy: Fix case where channel status is corruptedLarry Finger1-0/+1
commit ec4d3e3a054578de34cd0b587ab8a1ac36f629d9 upstream. This patch fixes commit 75388acd0cd8 ("add mac80211-based driver for legacy BCM43xx devices") In https://bugzilla.kernel.org/show_bug.cgi?id=207093, a defect in b43legacy is reported. Upon testing, thus problem exists on PPC and X86 platforms, is present in the oldest kernel tested (3.2), and has been present in the driver since it was first added to the kernel. The problem is a corrupted channel status received from the device. Both the internal card in a PowerBook G4 and the PCMCIA version (Broadcom BCM4306 with PCI ID 14e4:4320) have the problem. Only Rev, 2 (revision 4 of the 802.11 core) of the chip has been tested. No other devices using b43legacy are available for testing. Various sources of the problem were considered. Buffer overrun and other sources of corruption within the driver were rejected because the faulty channel status is always the same, not a random value. It was concluded that the faulty data is coming from the device, probably due to a firmware bug. As that source is not available, the driver must take appropriate action to recover. At present, the driver reports the error, and them continues to process the bad packet. This is believed that to be a mistake, and the correct action is to drop the correpted packet. Fixes: 75388acd0cd8 ("add mac80211-based driver for legacy BCM43xx devices") Cc: Stable <stable@vger.kernel.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-and-tested by: F. Erhard <erhard_f@mailbox.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200407190043.1686-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22carl9170: remove P2P_GO supportChristian Lamparter2-20/+5
commit b14fba7ebd04082f7767a11daea7f12f3593de22 upstream. This patch follows up on a bug-report by Frank Schäfer that discovered P2P GO wasn't working with wpa_supplicant. This patch removes part of the broken P2P GO support but keeps the vif switchover code in place. Cc: <stable@vger.kernel.org> Link: <https://lkml.kernel.org/r/3a9d86b6-744f-e670-8792-9167257edef8@googlemail.com> Reported-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200425092811.9494-1-chunkeey@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22e1000e: Relax condition to trigger reset for ME workaroundPunit Agrawal2-8/+5
commit d601afcae2febc49665008e9a79e701248d56c50 upstream. It's an error if the value of the RX/TX tail descriptor does not match what was written. The error condition is true regardless the duration of the interference from ME. But the driver only performs the reset if E1000_ICH_FWSM_PCIM2PCI_COUNT (2000) iterations of 50us delay have transpired. The extra condition can lead to inconsistency between the state of hardware as expected by the driver. Fix this by dropping the check for number of delay iterations. While at it, also make __ew32_prepare() static as it's not used anywhere else. CC: stable <stable@vger.kernel.org> Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22e1000e: Disable TSO for buffer overrun workaroundKai-Heng Feng1-0/+4
commit f29801030ac67bf98b7a65d3aea67b30769d4f7c upstream. Commit b10effb92e27 ("e1000e: fix buffer overrun while the I219 is processing DMA transactions") imposes roughly 30% performance penalty. The commit log states that "Disabling TSO eliminates performance loss for TCP traffic without a noticeable impact on CPU performance", so let's disable TSO by default to regain the loss. CC: stable <stable@vger.kernel.org> Fixes: b10effb92e27 ("e1000e: fix buffer overrun while the I219 is processing DMA transactions") BugLink: https://bugs.launchpad.net/bugs/1802691 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22iwlwifi: mvm: fix aux station leakSharon3-11/+18
[ Upstream commit f327236df2afc8c3c711e7e070f122c26974f4da ] When mvm is initialized we alloc aux station with aux queue. We later free the station memory when driver is stopped, but we never free the queue's memory, which casues a leak. Add a proper de-initialization of the station. Signed-off-by: Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200529092401.0121c5be55e9.Id7516fbb3482131d0c9dfb51ff20b226617ddb49@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22ixgbe: fix signed-integer-overflow warningXie XiuQi1-1/+1
[ Upstream commit 3b70683fc4d68f5d915d9dc7e5ba72c732c7315c ] ubsan report this warning, fix it by adding a unsigned suffix. UBSAN: signed-integer-overflow in drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:2246:26 65535 * 65537 cannot be represented in type 'int' CPU: 21 PID: 7 Comm: kworker/u256:0 Not tainted 5.7.0-rc3-debug+ #39 Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 03/27/2020 Workqueue: ixgbe ixgbe_service_task [ixgbe] Call trace: dump_backtrace+0x0/0x3f0 show_stack+0x28/0x38 dump_stack+0x154/0x1e4 ubsan_epilogue+0x18/0x60 handle_overflow+0xf8/0x148 __ubsan_handle_mul_overflow+0x34/0x48 ixgbe_fc_enable_generic+0x4d0/0x590 [ixgbe] ixgbe_service_task+0xc20/0x1f78 [ixgbe] process_one_work+0x8f0/0xf18 worker_thread+0x430/0x6d0 kthread+0x218/0x238 ret_from_fork+0x10/0x18 Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22ice: fix potential double free in probe unrollingJacob Keller1-1/+2
[ Upstream commit bc3a024101ca497bea4c69be4054c32a5c349f1d ] If ice_init_interrupt_scheme fails, ice_probe will jump to clearing up the interrupts. This can lead to some static analysis tools such as the compiler sanitizers complaining about double free problems. Since ice_init_interrupt_scheme already unrolls internally on failure, there is no need to call ice_clear_interrupt_scheme when it fails. Add a new unroll label and use that instead. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22macvlan: Skip loopback packets in RX handlerAlexander Sverdlin1-0/+4
[ Upstream commit 81f3dc9349ce0bf7b8447f147f45e70f0a5b36a6 ] Ignore loopback-originatig packets soon enough and don't try to process L2 header where it doesn't exist. The very similar br_handle_frame() in bridge code performs exactly the same check. This is an example of such ICMPv6 packet: skb len=96 headroom=40 headlen=96 tailroom=56 mac=(40,0) net=(40,40) trans=80 shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0xae2e9a2f ip_summed=1 complete_sw=0 valid=0 level=0) hash(0xc97ebd88 sw=1 l4=1) proto=0x86dd pkttype=5 iif=24 dev name=etha01.212 feat=0x0x0000000040005000 skb headroom: 00000000: 00 7c 86 52 84 88 ff ff 00 00 00 00 00 00 08 00 skb headroom: 00000010: 45 00 00 9e 5d 5c 40 00 40 11 33 33 00 00 00 01 skb headroom: 00000020: 02 40 43 80 00 00 86 dd skb linear: 00000000: 60 09 88 bd 00 38 3a ff fe 80 00 00 00 00 00 00 skb linear: 00000010: 00 40 43 ff fe 80 00 00 ff 02 00 00 00 00 00 00 skb linear: 00000020: 00 00 00 00 00 00 00 01 86 00 61 00 40 00 00 2d skb linear: 00000030: 00 00 00 00 00 00 00 00 03 04 40 e0 00 00 01 2c skb linear: 00000040: 00 00 00 78 00 00 00 00 fd 5f 42 68 23 87 a8 81 skb linear: 00000050: 00 00 00 00 00 00 00 00 01 01 02 40 43 80 00 00 skb tailroom: 00000000: ... skb tailroom: 00000010: ... skb tailroom: 00000020: ... skb tailroom: 00000030: ... Call Trace, how it happens exactly: ... macvlan_handle_frame+0x321/0x425 [macvlan] ? macvlan_forward_source+0x110/0x110 [macvlan] __netif_receive_skb_core+0x545/0xda0 ? enqueue_task_fair+0xe5/0x8e0 ? __netif_receive_skb_one_core+0x36/0x70 __netif_receive_skb_one_core+0x36/0x70 process_backlog+0x97/0x140 net_rx_action+0x1eb/0x350 ? __hrtimer_run_queues+0x136/0x2e0 __do_softirq+0xe3/0x383 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.4+0x4e/0x50 netif_rx_ni+0x60/0xd0 dev_loopback_xmit+0x83/0xf0 ip6_finish_output2+0x575/0x590 [ipv6] ? ip6_cork_release.isra.1+0x64/0x90 [ipv6] ? __ip6_make_skb+0x38d/0x680 [ipv6] ? ip6_output+0x6c/0x140 [ipv6] ip6_output+0x6c/0x140 [ipv6] ip6_send_skb+0x1e/0x60 [ipv6] rawv6_sendmsg+0xc4b/0xe10 [ipv6] ? proc_put_long+0xd0/0xd0 ? rw_copy_check_uvector+0x4e/0x110 ? sock_sendmsg+0x36/0x40 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x2b6/0x2d0 ? proc_dointvec+0x23/0x30 ? addrconf_sysctl_forward+0x8d/0x250 [ipv6] ? dev_forward_change+0x130/0x130 [ipv6] ? _raw_spin_unlock+0x12/0x30 ? proc_sys_call_handler.isra.14+0x9f/0x110 ? __call_rcu+0x213/0x510 ? get_max_files+0x10/0x10 ? trace_hardirqs_on+0x2c/0xe0 ? __sys_sendmsg+0x63/0xa0 __sys_sendmsg+0x63/0xa0 do_syscall_64+0x6c/0x1e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22mwifiex: Fix memory corruption in dump_stationPali Rohár1-8/+6
[ Upstream commit 3aa42bae9c4d1641aeb36f1a8585cd1d506cf471 ] The mwifiex_cfg80211_dump_station() uses static variable for iterating over a linked list of all associated stations (when the driver is in UAP role). This has a race condition if .dump_station is called in parallel for multiple interfaces. This corruption can be triggered by registering multiple SSIDs and calling, in parallel for multiple interfaces iw dev <iface> station dump [16750.719775] Unable to handle kernel paging request at virtual address dead000000000110 ... [16750.899173] Call trace: [16750.901696] mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex] [16750.907824] nl80211_dump_station+0xbc/0x278 [cfg80211] [16750.913160] netlink_dump+0xe8/0x320 [16750.916827] netlink_recvmsg+0x1b4/0x338 [16750.920861] ____sys_recvmsg+0x7c/0x2b0 [16750.924801] ___sys_recvmsg+0x70/0x98 [16750.928564] __sys_recvmsg+0x58/0xa0 [16750.932238] __arm64_sys_recvmsg+0x28/0x30 [16750.936453] el0_svc_common.constprop.3+0x90/0x158 [16750.941378] do_el0_svc+0x74/0x90 [16750.944784] el0_sync_handler+0x12c/0x1a8 [16750.948903] el0_sync+0x114/0x140 [16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060) [16750.958583] ---[ end trace c8ad181c2f4b8576 ]--- This patch drops the use of the static iterator, and instead every time the function is called iterates to the idx-th position of the linked-list. It would be better to convert the code not to use linked list for associated stations storage (since the chip has a limited number of associated stations anyway - it could just be an array). Such a change may be proposed in the future. In the meantime this patch can backported into stable kernels in this simple form. Fixes: 8baca1a34d4c ("mwifiex: dump station support in uap mode") Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22rtlwifi: Fix a double free in _rtl_usb_tx_urb_setup()Dan Carpenter1-6/+2
[ Upstream commit beb12813bc75d4a23de43b85ad1c7cb28d27631e ] Seven years ago we tried to fix a leak but actually introduced a double free instead. It was an understandable mistake because the code was a bit confusing and the free was done in the wrong place. The "skb" pointer is freed in both _rtl_usb_tx_urb_setup() and _rtl_usb_transmit(). The free belongs _rtl_usb_transmit() instead of _rtl_usb_tx_urb_setup() and I've cleaned the code up a bit to hopefully make it more clear. Fixes: 36ef0b473fbf ("rtlwifi: usb: add missing freeing of skbuff") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200513093951.GD347693@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22net/mlx5e: IPoIB, Drop multicast packets that this interface sentErez Shitrit1-3/+12
[ Upstream commit 8b46d424a743ddfef8056d5167f13ee7ebd1dcad ] After enabled loopback packets for IPoIB, we need to drop these packets that this HCA has replicated and came back to the same interface that sent them. Fixes: 4c6c615e3f30 ("net/mlx5e: IPoIB, Add PKEY child interface nic profile") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22veth: Adjust hard_start offset on redirect XDP framesJesper Dangaard Brouer1-4/+4
[ Upstream commit 5c8572251fabc5bb49fd623c064e95a9daf6a3e3 ] When native XDP redirect into a veth device, the frame arrives in the xdp_frame structure. It is then processed in veth_xdp_rcv_one(), which can run a new XDP bpf_prog on the packet. Doing so requires converting xdp_frame to xdp_buff, but the tricky part is that xdp_frame memory area is located in the top (data_hard_start) memory area that xdp_buff will point into. The current code tried to protect the xdp_frame area, by assigning xdp_buff.data_hard_start past this memory. This results in 32 bytes less headroom to expand into via BPF-helper bpf_xdp_adjust_head(). This protect step is actually not needed, because BPF-helper bpf_xdp_adjust_head() already reserve this area, and don't allow BPF-prog to expand into it. Thus, it is safe to point data_hard_start directly at xdp_frame memory area. Fixes: 9fc8d518d9d5 ("veth: Handle xdp_frames in xdp napi ring") Reported-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/158945338331.97035.5923525383710752178.stgit@firesoul Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22mt76: avoid rx reorder buffer overflowRyder Lee2-7/+7
[ Upstream commit 7c4f744d6703757be959f521a7a441bf34745d99 ] Enlarge slot to support 11ax 256 BA (256 MPDUs in an AMPDU) Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22net: qed*: Reduce RX and TX default ring count when running inside kdump kernelBhupesh Sharma2-2/+11
[ Upstream commit 73e030977f7884dbe1be0018bab517e8d02760f8 ] Normally kdump kernel(s) run under severe memory constraint with the basic idea being to save the crashdump vmcore reliably when the primary kernel panics/hangs. Currently the qed* ethernet driver ends up consuming a lot of memory in the kdump kernel, leading to kdump kernel panic when one tries to save the vmcore via ssh/nfs (thus utilizing the services of the underlying qed* network interfaces). An example OOM message log seen in the kdump kernel can be seen here [1], with crashkernel size reservation of 512M. Using tools like memstrack (see [2]), we can track the modules taking up the bulk of memory in the kdump kernel and organize the memory usage output as per 'highest allocator first'. An example log for the OOM case indicates that the qed* modules end up allocating approximately 216M memory, which is a large part of the total crashkernel size: dracut-pre-pivot[676]: ======== Report format module_summary: ======== dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages) dracut-pre-pivot[676]: Module qede using 65.3MB (1045 pages), peak allocation 65.3MB (1045 pages) This patch reduces the default RX and TX ring count from 1024 to 64 when running inside kdump kernel, which leads to a significant memory saving. An example log with the patch applied shows the reduced memory allocation in the kdump kernel: dracut-pre-pivot[674]: ======== Report format module_summary: ======== dracut-pre-pivot[674]: Module qed using 141.8MB (2268 pages), peak allocation 141.8MB (2268 pages) <..snip..> [dracut-pre-pivot[674]: Module qede using 4.8MB (76 pages), peak allocation 4.9MB (78 pages) Tested crashdump vmcore save via ssh/nfs protocol using underlying qed* network interface after applying this patch. [1] OOM log: ------------ kworker/0:6: page allocation failure: order:6, mode:0x60c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null) kworker/0:6 cpuset=/ mems_allowed=0 CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 4.18.0-109.el8.aarch64 #1 Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL025 01/18/2019 Workqueue: events work_for_cpu_fn Call trace: dump_backtrace+0x0/0x188 show_stack+0x24/0x30 dump_stack+0x90/0xb4 warn_alloc+0xf4/0x178 __alloc_pages_nodemask+0xcac/0xd58 alloc_pages_current+0x8c/0xf8 kmalloc_order_trace+0x38/0x108 qed_iov_alloc+0x40/0x248 [qed] qed_resc_alloc+0x224/0x518 [qed] qed_slowpath_start+0x254/0x928 [qed] __qede_probe+0xf8/0x5e0 [qede] qede_probe+0x68/0xd8 [qede] local_pci_probe+0x44/0xa8 work_for_cpu_fn+0x20/0x30 process_one_work+0x1ac/0x3e8 worker_thread+0x44/0x448 kthread+0x130/0x138 ret_from_fork+0x10/0x18 Cannot start slowpath qede: probe of 0000:05:00.1 failed with error -12 [2]. Memstrack tool: https://github.com/ryncsn/memstrack Cc: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Ariel Elior <aelior@marvell.com> Cc: GR-everest-linux-l2@marvell.com Cc: Manish Chopra <manishc@marvell.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22wcn36xx: Fix error handling path in 'wcn36xx_probe()'Christophe JAILLET1-2/+4
[ Upstream commit a86308fc534edeceaf64670c691e17485436a4f4 ] In case of error, 'qcom_wcnss_open_channel()' must be undone by a call to 'rpmsg_destroy_ept()', as already done in the remove function. Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200507043619.200051-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22ath10k: Remove msdu from idr when management pkt send failsRakesh Pillai3-0/+28
[ Upstream commit c730c477176ad4af86d9aae4d360a7ad840b073a ] Currently when the sending of any management pkt via wmi command fails, the packet is being unmapped freed in the error handling. But the idr entry added, which is used to track these packet is not getting removed. Hence, during unload, in wmi cleanup, all the entries in IDR are removed and the corresponding buffer is attempted to be freed. This can cause a situation where one packet is attempted to be freed twice. Fix this error by rmeoving the msdu from the idr list when the sending of a management packet over wmi fails. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1588667015-25490-1-git-send-email-pillair@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22iwlwifi: avoid debug max amsdu config overwriting itselfMordechay Goodstein2-11/+15
[ Upstream commit a65a5824298b06049dbaceb8a9bd19709dc9507c ] If we set amsdu_len one after another the second one overwrites the orig_amsdu_len so allow only moving from debug to non debug state. Also the TLC update check was wrong: it was checking that also the orig is smaller then the new updated size, which is not the case in debug amsdu mode. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: af2984e9e625 ("iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packets") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424182644.e565446a4fce.I9729d8c520d8b8bb4de9a5cdc62e01eb85168aac@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22libertas_tf: avoid a null dereference in pointer privColin Ian King1-3/+3
[ Upstream commit 049ceac308b0d57c4f06b9fb957cdf95d315cf0b ] Currently there is a check if priv is null when calling lbtf_remove_card but not in a previous call to if_usb_reset_dev that can also dereference priv. Fix this by also only calling lbtf_remove_card if priv is null. It is noteable that there don't seem to be any bugs reported that the null pointer dereference has ever occurred, so I'm not sure if the null check is required, but since we're doing a null check anyway it should be done for both function calls. Addresses-Coverity: ("Dereference before null check") Fixes: baa0280f08c7 ("libertas_tf: don't defer firmware loading until start()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200501173900.296658-1-colin.king@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22net: allwinner: Fix use correct return type for ndo_start_xmit()Yunjian Wang1-2/+2
[ Upstream commit 09f6c44aaae0f1bdb8b983d7762676d5018c53bc ] The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. And emac_start_xmit() can leak one skb if 'channel' == 3. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22drivers: net: davinci_mdio: fix potential NULL dereference in ↵Wei Yongjun1-0/+2
davinci_mdio_probe() [ Upstream commit e00edb4efbbc07425441a3be2aa87abaf5800d96 ] platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference since devm_ioremap() does not check input parameters for null. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 03f66f067560 ("net: ethernet: ti: davinci_mdio: use devm_ioremap()") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22net: lpc-enet: fix error return code in lpc_mii_init()Wei Yongjun1-1/+2
[ Upstream commit 88ec7cb22ddde725ed4ce15991f0bd9dd817fd85 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22net: bcmgenet: Fix WoL with password after deep sleepDoug Berger2-21/+20
[ Upstream commit 6f7689057a0f10a6c967b9f2759d7a3dc948b930 ] Broadcom STB chips support a deep sleep mode where all register contents are lost. Because we were stashing the MagicPacket password into some of these registers a suspend into that deep sleep then a resumption would not lead to being able to wake-up from MagicPacket with password again. Fix this by keeping a software copy of the password and program it during suspend. Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code") Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22net: bcmgenet: set Rx mode before starting netifDoug Berger1-0/+4
[ Upstream commit 72f96347628e73dbb61b307f18dd19293cc6792a ] This commit explicitly calls the bcmgenet_set_rx_mode() function when the network interface is started. This function is normally called by ndo_set_rx_mode when the flags are changed, but apparently not when the driver is suspended and resumed. This change ensures that address filtering or promiscuous mode are properly restored by the driver after the MAC may have been reset. Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22dpaa2-eth: fix return codes used in ndo_setup_tcJesper Dangaard Brouer1-2/+2
[ Upstream commit b89c1e6bdc73f5775e118eb2ab778e75b262b30c ] Drivers ndo_setup_tc call should return -EOPNOTSUPP, when it cannot support the qdisc type. Other return values will result in failing the qdisc setup. This lead to qdisc noop getting assigned, which will drop all TX packets on the interface. Fixes: ab1e6de2bd49 ("dpaa2-eth: Add mqprio support") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-20 11:52:05 +0300