summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-06-13net/mlx5: Add Vendor Specific Capability access gatewayAlex Vesker4-1/+315
The Vendor Specific Capability (VSC) is used to activate a gateway interfacing with the device. The gateway is used to read or write device configurations, which are organized in different domains (spaces). A configuration access may result in multiple actions, reads, writes. Example usages are accessing the Crspace domain to read the crspace or locking a device semaphore using the Semaphore domain. The configuration access use pci_cfg_access to prevent parallel access to the VSC space by the driver and userspace calls. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Move all devlink related functions calls to devlink.cEran Ben Elisha4-38/+80
Centralize all devlink related callbacks in one file. In the downstream patch, some more functionality will be added, this patch is preparing the driver infrastructure for it. Currently, move devlink un/register functions calls into this file. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Add EQ enable/disable APIYuval Avnery2-30/+76
Previously, EQ joined the chain notifier on creation. This forced the caller to be ready to handle events before creating the EQ through eq_create_generic interface. To help the caller control when the created EQ will be attached to the IRQ, add enable/disable API. Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Use a single IRQ for all async EQsAriel Levkovich2-33/+24
The patch modifies the IRQ allocation so that all async EQs are assigned to the same IRQ resulting in more available IRQs for completion EQs. The changes are using the support for IRQ sharing and EQ polling budget that was introduced in previous patches so when the shared interrupt is triggered, the kernel will serially call the handler of each of the sharing EQs with a certain budget of EQEs to poll in order to prevent starvation. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Rename mlx5_irq_info to mlx5_irqYuval Avnery1-39/+38
struct mlx5_irq_info is an active object and not just info. Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Move all IRQ logic to pci_irq.cYuval Avnery5-329/+354
Finalize IRQ separation and expose irq interface. Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Generalize IRQ interface to work with irq_tableYuval Avnery1-9/+29
IRQ interface should operate within the irq_table context. It should be independent of any EQ data structure. The interface that will be exposed: init/clenup, create/destroy, attach/detach Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Separate IRQ table creation from EQ table creationYuval Avnery3-19/+14
IRQ allocation should be part of the IRQ table life-cycle. Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Move IRQ affinity set to IRQ allocation phaseYuval Avnery1-8/+17
Affinity set/clear is part of the IRQ life-cycle. Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Move IRQ rmap creation to IRQ allocation phaseYuval Avnery1-25/+57
Rmap creation/deletion is part of the IRQ life-cycle. Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Separate IRQ data from EQ table dataYuval Avnery3-44/+95
IRQ table should only exist for mlx5_core_dev for PF and VF only. EQ table of mediated devices should hold a pointer to the IRQ table of the parent PCI device. Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Separate IRQ request/free from EQ life cycleYuval Avnery1-39/+82
Instead of requesting IRQ with eq creation, IRQs will be requested before EQ table creation. Instead of freeing the IRQs after EQ destroy, free IRQs after eq table destroy. Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Change interrupt handler to call chain notifierYuval Avnery2-50/+97
Multiple EQs may share the same IRQ in subsequent patches. Instead of calling the IRQ handler directly, the EQ will register to an atomic chain notfier. The Linux built-in shared IRQ is not used because it forces the caller to disable the IRQ and clear affinity before free_irq() can be called. This patch is the first step in the separation of IRQ and EQ logic. Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Introduce EQ polling budgetYuval Avnery1-28/+27
Multiple EQs may share the same irq in subsequent patches. To avoid starvation, a budget is set per EQ's interrupt handler. Because of this change, it is no longer required to check that MLX5_NUM_SPARE_EQE eqes were polled (to detect that arm is required). It is guaranteed that MLX5_NUM_SPARE_EQE > budget, therefore the handler will arm and exit the handler before all the entries in the eq are polled. In the scenario where the handler is out of budget and there are more EQEs to poll, arming the EQ guarantees that the HW will send another interrupt and the handler will be called again. Signed-off-by: Yuval Avnery <yuvalav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Support querying max VFs from deviceBodong Wang2-9/+31
For ECPF with eswitch manager privilege, query the host max VF count by querying the device using query_functions command. With this enhancement: 1. flow steering entries are created only for valid vports based on the max VF count of the PF. 2. Driver only queries cap of valid vport. Eswitch requires the max VFs when doing initialization, so do sr-iov init before eswitch init. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: E-Switch, Return raw output for query esw functionsBodong Wang3-21/+12
Current function only returns host num of VFs, later patch requires other params such as host maximum num of VFs. Return the raw output so that caller can extract info as needed. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: E-Switch, Handle representors creation in handler contextVu Pham2-51/+50
Unified representors creation in esw_functions_changed context handler. Emulate the esw_function_changed event for FW/HW that does not support this event. Signed-off-by: Vu Pham <vuhuong@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13net/mlx5: Increase wait time for fw initializationDaniel Jurgens1-4/+14
Firmware FLR happens sequentially, in some cases, like when destroying a VM that had many VFs, may require waiting much longer than 10 seconds. Increase the timeout to 2 minutes, and print a wait countdown status every 20 seconds. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-12net: ena: update driver version from 2.0.3 to 2.1.0Sameeh Jubran1-2/+2
Update driver version to match device specification. Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: ena: remove inline keyword from functions in *.cSameeh Jubran3-24/+24
Let the compiler decide if the function should be inline in *.c files Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: ena: add ethtool function for changing io queue sizesSameeh Jubran3-1/+40
Implement the set_ringparam() function of the ethtool interface to enable the changing of io queue sizes. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: ena: allow queue allocation backoff when low on memorySameeh Jubran3-42/+127
If there is not enough memory to allocate io queues the driver will try to allocate smaller queues. The backoff algorithm is as follows: 1. Try to allocate TX and RX and if successful. 1.1. return success 2. Divide by 2 the size of the larger of RX and TX queues (or both if their size is the same). 3. If TX or RX is smaller than 256 3.1. return failure. 4. else 4.1. go back to 1. Also change the tx_queue_size, rx_queue_size field names in struct adapter to requested_tx_queue_size and requested_rx_queue_size, and use RX and TX queue 0 for actual queue sizes. Explanation: The original fields were useless as they were simply used to assign values once from them to each of the queues in the adapter in ena_probe(). They could simply be deleted. However now that we have a backoff feature, we have use for them. In case of backoff there is a difference between the requested queue sizes and the actual sizes. Therefore there is a need to save the requested queue size for future retries of queue allocation (for example if allocation failed and then ifdown + ifup was called we want to start the allocation from the original requested size of the queues). Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: ena: make ethtool show correct current and max queue sizesSameeh Jubran2-6/+6
Currently ethtool -g shows the same size for current and max queue sizes. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: ena: enable negotiating larger Rx ring sizeSameeh Jubran2-49/+110
Use MAX_QUEUES_EXT get feature capability to query the device. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: ena: add MAX_QUEUES_EXT get feature admin commandArthur Kiyanovski3-30/+105
Add a new admin command to support different queue size for Tx/Rx queues (the change also support different SQ/CQ sizes) Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12dpaa2-eth: Add mqprio supportIoana Radulescu2-5/+64
Implement mqprio qdisc support by mapping traffic classes to different hardware enqueue priorities. The maximum number of supported traffic classes is an attribute of each DPNI object. The traffic classes map to hardware priorities from highest (0) to lowest (highest prio number). The skb priority information received from the stack is used to select the hardware Tx queue on which to enqueue the frame. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12dpaa2-eth: Support multiple traffic classes on TxIoana Radulescu2-11/+19
DPNI objects can have multiple traffic classes, as reflected by the num_tc attribute. Until now we ignored its value and only used traffic class 0. This patch adds support for multiple Tx traffic classes; we have num_queues x num_tcs hardware queues available for each interface. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12dpaa2-eth: Refactor xps codeIoana Radulescu1-13/+32
Move the code configuring xps on the netdev TX queues to a separate function. A subsequent patch will need to call this in another context as well. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: ethernet: ti: cpts: fix build failure for powerpcGrygorii Strashko1-0/+1
Add dependency to TI CPTS from Common CLK framework COMMON_CLK to fix allyesconfig build for Powerpc: drivers/net/ethernet/ti/cpts.c: In function 'cpts_of_mux_clk_setup': drivers/net/ethernet/ti/cpts.c:567:2: error: implicit declaration of function 'of_clk_parent_fill'; did you mean 'of_clk_get_parent_name'? [-Werror=implicit-function-declaration] of_clk_parent_fill(refclk_np, parent_names, num_parents); ^~~~~~~~~~~~~~~~~~ of_clk_get_parent_name Fixes: a3047a81ba13 ("net: ethernet: ti: cpts: add support for ext rftclk selection") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: mvpp2: prs: Use the correct helpers when removing all VID filtersMaxime Chevallier1-2/+4
When removing all VID filters, the mvpp2_prs_vid_entry_remove would be called with the TCAM id incorrectly used as a VID, causing the wrong TCAM entries to be invalidated. Fix this by directly invalidating entries in the VID range. Fixes: 56beda3db602 ("net: mvpp2: Add hardware offloading for VLAN filtering") Suggested-by: Yuri Chipchev <yuric@marvell.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: mvpp2: prs: Fix parser range for VID filteringMaxime Chevallier1-9/+8
VID filtering is implemented in the Header Parser, with one range of 11 vids being assigned for each no-loopback port. Make sure we use the per-port range when looking for existing entries in the Parser. Since we used a global range instead of a per-port one, this causes VIDs to be removed from the whitelist from all ports of the same PPv2 instance. Fixes: 56beda3db602 ("net: mvpp2: Add hardware offloading for VLAN filtering") Suggested-by: Yuri Chipchev <yuric@marvell.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12mlxsw: spectrum: Disallow prio-tagged packets when PVID is removedIdo Schimmel1-1/+1
When PVID is removed from a bridge port, the Linux bridge drops both untagged and prio-tagged packets. Align mlxsw with this behavior. Fixes: 148f472da5db ("mlxsw: reg: Add the Switch Port Acceptable Frame Types register") Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2Petr Machata1-2/+2
Due to an issue on Spectrum-2, in front-panel ports split four ways, 2 out of 32 port buffers cannot be used. To work around this, the next FW release will mark them as unused, and will report correspondingly lower total shared buffer size. mlxsw will pick up the new value through a query to cap_total_buffer_size resource. However the initial size for shared buffer pool 0 is hard-coded and therefore needs to be updated. Thus reduce the pool size by 2.7 MiB (which corresponds to 2/32 of the total size of 42 MiB), and round down to the whole number of cells. Fixes: fe099bf682ab ("mlxsw: spectrum_buffers: Add Spectrum-2 shared buffer configuration") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12mlxsw: spectrum_flower: Fix TOS matchingJiri Pirko1-2/+2
The TOS value was not extracted correctly. Fix it. Fixes: 87996f91f739 ("mlxsw: spectrum_flower: Add support for ip tos") Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12mlxsw: spectrum_router: Refresh nexthop neighbour when it becomes deadIdo Schimmel1-3/+70
The driver tries to periodically refresh neighbours that are used to reach nexthops. This is done by periodically calling neigh_event_send(). However, if the neighbour becomes dead, there is nothing we can do to return it to a connected state and the above function call is basically a NOP. This results in the nexthop never being written to the device's adjacency table and therefore never used to forward packets. Fix this by dropping our reference from the dead neighbour and associating the nexthop with a new neigbhour which we will try to refresh. Fixes: a7ff87acd995 ("mlxsw: spectrum_router: Implement next-hop routing") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12mlxsw: spectrum: Use different seeds for ECMP and LAG hashIdo Schimmel1-1/+4
The same hash function and seed are used for both ECMP and LAG hash. Therefore, when a LAG device is used as a nexthop device as part of an ECMP group, hash polarization can occur and all the traffic will be hashed to a single LAG slave. Fix this by using a different seed for the LAG hash. Fixes: fa73989f2697 ("mlxsw: spectrum: Use a stable ECMP/LAG seed") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: dsa: mv88e6xxx: lock mutex in port_fdb_dumpVivien Didelot1-8/+6
During a port FDB dump operation, the mutex protecting the concurrent access to the switch registers is currently held by the internal mv88e6xxx_port_db_dump and mv88e6xxx_port_db_dump_fid helpers. It must be held at the higher level in mv88e6xxx_port_fdb_dump which is called directly by DSA through ds->ops->port_fdb_dump. Fix this. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12net: ethernet: wiznet: w5X00 add device tree supportNicolas Saenz Julienne1-2/+22
The w5X00 chip provides an SPI to Ethernet inteface. This patch allows platform devices to be defined through the device tree. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: tls: make use of kernel-driven TX resyncJakub Kicinski3-12/+18
When TCP stream gets out of sync (driver stops receiving skbs with expected TCP sequence numbers) request a TX resync from the kernel. We try to distinguish retransmissions from missed transmissions by comparing the sequence number to expected - if it's further than the expected one - we probably missed packets. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11net/tls: generalize the resync callbackJakub Kicinski2-6/+12
Currently only RX direction is ever resynced, however, TX may also get out of sequence if packets get dropped on the way to the driver. Rename the resync callback and add a direction parameter. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: tls: enable TLS RX offloadJakub Kicinski3-6/+26
Set ethtool TLS RX feature based on NIC capabilities, and enable TLS RX when connections are added for decryption. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: tls: implement RX TLS resyncDirk van der Merwe1-0/+32
Enable kernel-controlled RX resync and propagate TLS connection RX resync from kernel TLS to firmware. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: add async version of mailbox communicationJakub Kicinski4-22/+215
Some control messages must be sent from atomic context. The mailbox takes sleeping locks and uses a waitqueue so add a "posted" version of communication. Trylock the semaphore and if that's successful kick of the device communication. The device communication will be completed from a workqueue, which will also release the semaphore. If locks are taken queue the message and return. Schedule a different workqueue to take the semaphore and run the communication. Note that the there are currently no atomic users which would actually need the return value, so all replies to posted messages are just freed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: rename nfp_ccm_mbox_alloc()Jakub Kicinski3-8/+8
We need the name nfp_ccm_mbox_alloc() for allocating the mailbox communication channel itself. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11nfp: tls: set skb decrypted flagDirk van der Merwe3-9/+22
Firmware indicates when a packet has been decrypted by reusing the currently unused BPF flag. Transfer this information into the skb and provide a statistic of all decrypted segments. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11net/tls: pass record number as a byte arrayJakub Kicinski1-1/+2
TLS offload code casts record number to a u64. The buffer should be aligned to 8 bytes, but its actually a __be64, and the rest of the TLS code treats it as big int. Make the offload callbacks take a byte array, drivers can make the choice to do the ugly cast if they want to. Prepare for copying the record number onto the stack by defining a constant for max size of the byte array. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11geneve: Don't assume linear buffers in error handlerStefano Brivio1-1/+1
In commit a07966447f39 ("geneve: ICMP error lookup handler") I wrongly assumed buffers from icmp_socket_deliver() would be linear. This is not the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear data. Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac ("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6: avoid uninit-value in gue_err() and gue6_err()"). Use pskb_may_pull() instead of checking skb->len, and take into account the fact we later access the GENEVE header with udp_hdr(), so we also need to sum skb_transport_header() here. Reported-by: Guillaume Nault <gnault@redhat.com> Fixes: a07966447f39 ("geneve: ICMP error lookup handler") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11vxlan: Don't assume linear buffers in error handlerStefano Brivio1-1/+1
In commit c3a43b9fec8a ("vxlan: ICMP error lookup handler") I wrongly assumed buffers from icmp_socket_deliver() would be linear. This is not the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear data. Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac ("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6: avoid uninit-value in gue_err() and gue6_err()"). Use pskb_may_pull() instead of checking skb->len, and take into account the fact we later access the VXLAN header with udp_hdr(), so we also need to sum skb_transport_header() here. Reported-by: Guillaume Nault <gnault@redhat.com> Fixes: c3a43b9fec8a ("vxlan: ICMP error lookup handler") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-10r8169: remove struct rtl_cfg_infoHeiner Kallweit1-37/+19
Simplify the code by removing struct rtl_cfg_info. Only info we need per PCI ID is whether it supports GBit or not. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-10r8169: remove member coalesce_info from struct rtl_cfg_infoHeiner Kallweit1-5/+5
To prepare removal of struct rtl_cfg_info, set the coalesce config based on the chip version number. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 06:25:39 +0300