summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-04-17net/mlx5e: Fix error handling when refreshing TIRsGavi Teitz1-2/+4
[ Upstream commit bc87a0036826a37b43489b029af8143bd07c6cca ] Previously, a false positive would be caught if the TIRs list is empty, since the err value was initialized to -ENOMEM, and was only updated if a TIR is refreshed. This is resolved by initializing the err value to zero. Fixes: b676f653896a ("net/mlx5e: Refactor refresh TIRs") Signed-off-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-17r8169: disable ASPM againHeiner Kallweit1-0/+6
[ Upstream commit b75bb8a5b755d0c7bf1ac071e4df2349a7644a1e ] There's a significant number of reports that re-enabling ASPM causes different issues, ranging from decreased performance to system not booting at all. This affects only a minority of users, but the number of affected users is big enough that we better switch off ASPM again. This will hurt notebook users who are not affected by the issues, they may see decreased battery runtime w/o ASPM. With the PCI core folks is being discussed to add generic sysfs attributes to control ASPM. Once this is in place brave enough users can re-enable ASPM on their system. Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-17qmi_wwan: add Olicard 600Bjørn Mork1-0/+1
[ Upstream commit 6289d0facd9ebce4cc83e5da39e15643ee998dc5 ] This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-17net/mlx5: Decrease default mr cache sizeArtemy Kovalyov1-20/+0
[ Upstream commit e8b26b2135dedc0284490bfeac06dfc4418d0105 ] Delete initialization of high order entries in mr cache to decrease initial memory footprint. When required, the administrator can populate the entries with memory keys via the /sys interface. This approach is very helpful to significantly reduce the per HW function memory footprint in virtualization environments such as SRIOV. Fixes: 9603b61de1ee ("mlx5: Move pci device handling from mlx5_ib to mlx5_core") Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reported-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-17ibmvnic: Fix completion structure initializationThomas Falcon1-2/+3
[ Upstream commit bbd669a868bba591ffd38b7bc75a7b361bb54b04 ] Fix device initialization completion handling for vNIC adapters. Initialize the completion structure on probe and reinitialize when needed. This also fixes a race condition during kdump where the driver can attempt to access the completion struct before it is initialized: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0000000081acbe0 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1 NIP: c0000000081acbe0 LR: c0000000081ad964 CTR: c0000000081ad900 REGS: c000000027f3f990 TRAP: 0300 Not tainted (4.18.0-64.el8.ppc64le) MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228288 XER: 00000006 CFAR: c000000008008934 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 GPR00: c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58 GPR04: 0000000000000003 0000000000000001 000049a086918581 00000000000000d4 GPR08: 0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28 GPR12: c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100 GPR16: 0000000000000038 0000000000000007 c0000000095e2230 0000000000000006 GPR20: 0000000000400140 0000000000000001 c00000000910c880 0000000000000000 GPR24: 0000000000000000 0000000000000006 0000000000000000 0000000000000003 GPR28: 0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58 NIP [c0000000081acbe0] __wake_up_locked+0x50/0x100 LR [c0000000081ad964] complete+0x64/0xa0 Call Trace: [c000000027f3fc10] [c000000027f3fc60] 0xc000000027f3fc60 (unreliable) [c000000027f3fc60] [c0000000081ad964] complete+0x64/0xa0 [c000000027f3fca0] [d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic] [c000000027f3fd50] [d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic] [c000000027f3fda0] [c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0 [c000000027f3fe00] [c000000008cd13f4] __do_softirq+0x164/0x400 [c000000027f3fef0] [c00000000813ed64] irq_exit+0x184/0x1c0 [c000000027f3ff20] [c0000000080188e8] __do_irq+0xb8/0x210 [c000000027f3ff90] [c00000000802d0a4] call_do_irq+0x14/0x24 [c000000026a5b010] [c000000008018adc] do_IRQ+0x9c/0x130 [c000000026a5b060] [c000000008008ce4] hardware_interrupt_common+0x114/0x120 Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-17hv_netvsc: Fix unwanted wakeup after tx_disableHaiyang Zhang3-8/+31
[ Upstream commit 1b704c4a1ba95574832e730f23817b651db2aa59 ] After queue stopped, the wakeup mechanism may wake it up again when ring buffer usage is lower than a threshold. This may cause send path panic on NULL pointer when we stopped all tx queues in netvsc_detach and start removing the netvsc device. This patch fix it by adding a tx_disable flag to prevent unwanted queue wakeup. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Reported-by: Mohammed Gamal <mgamal@redhat.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-08Merge tag 'v5.0.7' into dev-5.0Joel Stanley29-114/+199
This is the 5.0.7 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-04-05net: stmmac: Avoid one more sometimes uninitialized Clang warningNathan Chancellor1-1/+1
[ Upstream commit 1f5d861f7fefa971b2c6e766f77932c86419a319 ] When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable 'ns' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable 'ns' is used uninitialized whenever '&&' condition is false [-Werror,-Wsometimes-uninitialized] Clang is concerned with the use of stmmac_do_void_callback (which stmmac_get_systime wraps), as it may fail to initialize these values if the if condition was ever false (meaning the callback doesn't exist). It's not wrong because the callback is what initializes ns. While it's unlikely that the callback is going to disappear at some point and make that condition false, we can easily avoid this warning by zero initializing the variable. Link: https://github.com/ClangBuiltLinux/linux/issues/384 Fixes: df103170854e ("net: stmmac: Avoid sometimes uninitialized Clang warnings") Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05wlcore: Fix memory leak in case wl12xx_fetch_firmware failureZumeng Chen1-2/+5
[ Upstream commit ba2ffc96321c8433606ceeb85c9e722b8113e5a7 ] Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware failed instead of meaningless goto out to avoid the following memory leak reports(Only the last one listed): unreferenced object 0xc28a9a00 (size 512): comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<6624adab>] kmemleak_alloc+0x40/0x74 [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270 [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore] [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore] [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211] [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211] [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211] [<7e1d425a>] process_one_work+0x284/0x42c [<55f9432e>] worker_thread+0x2fc/0x48c [<abb582c6>] kthread+0x148/0x160 [<63144b13>] ret_from_fork+0x14/0x2c [< (null)>] (null) [<1f6e7715>] 0xffffffff Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05brcmfmac: Use firmware_request_nowarn for the clm_blobHans de Goede1-1/+1
[ Upstream commit 4ad0be160544ffbdafb7cec39bb8e6dd0a97317a ] The linux-firmware brcmfmac firmware files contain an embedded table with per country allowed channels and strength info. For recent hardware these versions of the firmware are specially build for linux-firmware, the firmware files directly available from Cypress rely on a separate clm_blob file for this info. For some unknown reason Cypress refuses to provide the standard firmware files + clm_blob files it uses elsewhere for inclusion into linux-firmware, instead relying on these special builds with the clm_blob info embedded. This means that the linux-firmware firmware versions often lag behind, but I digress. The brcmfmac driver does support the separate clm_blob file and always tries to load this. Currently we use request_firmware for this. This means that on any standard install, using the standard combo of linux-kernel + linux-firmware, we will get a warning: "Direct firmware load for ... failed with error -2" On top of this, brcmfmac itself prints: "no clm_blob available (err=-2), device may have limited channels available". This commit switches to firmware_request_nowarn, fixing almost any brcmfmac device logging the warning (it leaves the brcmfmac info message in place). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05mt7601u: bump supported EEPROM versionStanislaw Gruszka1-1/+1
[ Upstream commit 3bd1505fed71d834f45e87b32ff07157fdda47e0 ] As reported by Michael eeprom 0d is supported and work with the driver. Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param with 0d EEPORM looks like this: RSSI offset: 0 0 Reference temp: f9 LNA gain: 8 Reg channels: 1-14 Per rate power: raw:05 bw20:05 bw40:05 raw:05 bw20:05 bw40:05 raw:03 bw20:03 bw40:03 raw:03 bw20:03 bw40:03 raw:04 bw20:04 bw40:04 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:02 bw20:02 bw40:02 raw:00 bw20:00 bw40:00 Per channel power: tx_power ch1:09 ch2:09 tx_power ch3:0a ch4:0a tx_power ch5:0a ch6:0a tx_power ch7:0b ch8:0b tx_power ch9:0b ch10:0b tx_power ch11:0b ch12:0b tx_power ch13:0b ch14:0b Reported-and-tested-by: Michael <ZeroBeat@gmx.de> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05iwlwifi: mvm: fix RFH config command with >=10 CPUsJohannes Berg1-6/+14
[ Upstream commit dbf592f3d14fb7d532cb7c820b1065cf33e02aaa ] If we have >=10 (logical) CPUs, our command size exceeds the internal buffer size and the command fails; fix that by using IWL_HCMD_DFL_NOCOPY for the command that's allocated anyway. While at it, also fix the leak of cmd, and use struct_size() to calculate its size. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 8edbfaa19835 ("iwlwifi: mvm: configure multi RX queue") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05e1000e: Exclude device from suspend direct complete optimizationKai-Heng Feng1-0/+2
[ Upstream commit 59f58708c5047289589cbf6ee95146b76cf57d1e ] e1000e sets different WoL settings in system suspend callback and runtime suspend callback. The suspend direct complete optimization leaves e1000e in runtime suspended state with wrong WoL setting during system suspend. To fix this, we need to disable suspend direct complete optimization to let e1000e always use suspend callback to set correct WoL during system suspend. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05e1000e: fix cyclic resets at link up with active txKonstantin Khlebnikov1-9/+6
[ Upstream commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61 ] I'm seeing series of e1000e resets (sometimes endless) at system boot if something generates tx traffic at this time. In my case this is netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames" from e1000e itself. As result e1000_watchdog_task sees used tx buffer while carrier is off and start this reset cycle again. [ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000 [ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 27.174495] 8021q: 802.1Q VLAN Support v1.8 [ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1 [ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 30.898564] netpoll: netconsole: local port 6666 [ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8 [ 30.898567] netpoll: netconsole: interface 'eth1' [ 30.898568] netpoll: netconsole: remote port 6666 [ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790 [ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0 [ 30.917747] console [netcon0] enabled [ 30.917749] netconsole: network logging started [ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None This patch flushes tx buffers only once when carrier is off rather than at each watchdog iteration. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05net: phy: consider latched link-down status in polling modeHeiner Kallweit2-6/+17
[ Upstream commit 93c0970493c71f264e6c3c7caf1ff24a9e1de786 ] The link status value latches link-down events. To get the current status we read the register twice in genphy_update_link(). There's a potential risk that we miss a link-down event in polling mode. This may cause issues if the user e.g. connects his machine to a different network. On the other hand reading the latched value may cause issues in interrupt mode. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up and triggers an interrupt. Interrupt handler reads link status, means it reads the latched "link is down" info. But there won't be another interrupt as long as link stays up, therefore phylib will never recognize that link is up. Deal with both scenarios by reading the register twice in interrupt mode only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05net: marvell: mvpp2: fix stuck in-band SGMII negotiationRussell King1-6/+11
[ Upstream commit 316734fdcf70900a83065360cff11a5826919067 ] It appears that the mvpp22 can get stuck with SGMII negotiation. The symptoms are that in-band negotiation never completes and the partner (eg, PHY) never reports SGMII link up, or if it supports negotiation bypass, goes into negotiation bypass mode (which will happen when the PHY sees that the MAC is alive but gets no response.) Triggering the PHY end of the link to re-negotiate results in the bypass bit clearing on the PHY, and then re-setting - indicating that the problem is at the mvpp22 GMAC end. Asserting the GMAC reset and de-asserting it resolves the issue. Arrange to assert the GMAC reset at probe time, and deassert it only after we have configured the GMAC for the appropriate mode. This resolves the issue. Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05ath10k: fix shadow register implementation for WCN3990Rakesh Pillai2-14/+14
[ Upstream commit 1863008369ae0407508033b4b00f98b985adeb15 ] WCN3990 supports shadow registers write operation support for copy engine for regular operation in powersave mode. Since WCN3990 is a 64-bit target, the shadow register implementation needs to be done in the copy engine handlers for 64-bit target. Currently the shadow register implementation is present in the 32-bit target handlers of copy engine. Fix the shadow register copy engine write operation implementation for 64-bit target(WCN3990). Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Fixes: b7ba83f7c414 ("ath10k: add support for shadow register for WNC3990") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05iwlwifi: pcie: fix emergency pathSara Sharon1-3/+8
[ Upstream commit c6ac9f9fb98851f47b978a9476594fc3c477a34d ] Allocator swaps the pending requests with 0 when it starts working. This means that relying on it n RX path to decide if to move to emergency is not always a good idea, since it may be zero, but there are still a lot of unallocated RBs in the system. Change allocator to decrement the pending requests on real time. It is more expensive since it accesses the atomic variable more times, but it gives the RX path a better idea of the system's status. Reported-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 868a1e863f95 ("iwlwifi: pcie: avoid empty free RB queue") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05mt76: usb: do not run mt76u_queues_deinit twiceLorenzo Bianconi1-9/+2
[ Upstream commit b3098121c42caaf3aea239b8655cf52d45be116f ] Do not call mt76u_queues_deinit routine in mt76u_alloc_queues error path since it will be run in mt76x0u_register_device or mt76x2u_register_device error path. Current implementation triggers the following kernel warning: [ 67.005516] WARNING: CPU: 2 PID: 761 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa4/0xb8 [ 67.019513] refcount_t: underflow; use-after-free. [ 67.099872] Hardware name: BCM2835 [ 67.106268] Backtrace: [ 67.111584] [<8010c91c>] (dump_backtrace) from [<8010cc00>] (show_stack+0x20/0x24) [ 67.124974] r6:60000013 r5:ffffffff r4:00000000 r3:a50bade6 [ 67.132226] [<8010cbe0>] (show_stack) from [<807ca5f4>] (dump_stack+0xc8/0x114) [ 67.141225] [<807ca52c>] (dump_stack) from [<8011e65c>] (__warn+0xf4/0x120) [ 67.149849] r9:000000bb r8:804d0138 r7:00000009 r6:8099dc84 r5:00000000 r4:b66c7b58 [ 67.160767] [<8011e568>] (__warn) from [<8011e6d0>] (warn_slowpath_fmt+0x48/0x50) [ 67.171436] r9:7f65e128 r8:80d1419c r7:80c0bac4 r6:b97b3044 r5:b7368e00 r4:00000000 [ 67.182433] [<8011e68c>] (warn_slowpath_fmt) from [<804d0138>] (refcount_sub_and_test_checked+0xa4/0xb8) [ 67.195221] r3:80c91c25 r2:8099dc94 [ 67.200370] r4:00000000 [ 67.204397] [<804d0094>] (refcount_sub_and_test_checked) from [<804d0164>] (refcount_dec_and_test_checked+0x18/0x1c) [ 67.218046] r4:b7368e00 r3:00000001 [ 67.223125] [<804d014c>] (refcount_dec_and_test_checked) from [<805db49c>] (usb_free_urb+0x20/0x4c) [ 67.235358] [<805db47c>] (usb_free_urb) from [<7f639804>] (mt76u_buf_free+0x98/0xac [mt76_usb]) [ 67.247302] r4:00000001 r3:00000001 [ 67.252468] [<7f63976c>] (mt76u_buf_free [mt76_usb]) from [<7f639ef8>] (mt76u_queues_deinit+0x44/0x100 [mt76_usb]) [ 67.266102] r8:b8fe8600 r7:b5dac480 r6:b5dace20 r5:00000001 r4:00000000 r3:00000080 [ 67.277132] [<7f639eb4>] (mt76u_queues_deinit [mt76_usb]) from [<7f65c040>] (mt76x0u_cleanup+0x40/0x4c [mt76x0u]) [ 67.290737] r7:b5dac480 r6:b8fe8600 r5:ffffffea r4:b5dace20 [ 67.298069] [<7f65c000>] (mt76x0u_cleanup [mt76x0u]) from [<7f65c564>] (mt76x0u_probe+0x1f0/0x354 [mt76x0u]) [ 67.311174] r4:b5dace20 r3:00000000 [ 67.316312] [<7f65c374>] (mt76x0u_probe [mt76x0u]) from [<805e0b6c>] (usb_probe_interface+0x104/0x240) [ 67.328915] r7:00000000 r6:7f65e034 r5:b6634800 r4:b8fe8620 [ 67.336276] [<805e0a68>] (usb_probe_interface) from [<8056a8bc>] (really_probe+0x224/0x2f8) [ 67.347965] r10:b65f0a00 r9:00000019 r8:7f65e034 r7:80d3e124 r6:00000000 r5:80d3e120 [ 67.359175] r4:b8fe8620 r3:805e0a68 [ 67.364384] [<8056a698>] (really_probe) from [<8056ab60>] (driver_probe_device+0x6c/0x180) [ 67.375974] r10:b65f0a00 r9:7f65e2c0 r8:b8fe8620 r7:00000000 r6:7f65e034 r5:7f65e034 [ 67.387170] r4:b8fe8620 r3:00000000 [ 67.392378] [<8056aaf4>] (driver_probe_device) from [<8056ad54>] (__driver_attach+0xe0/0xe4) [ 67.404097] r9:7f65e2c0 r8:7f65d22c r7:00000000 r6:b8fe8654 r5:7f65e034 r4:b8fe8620 [ 67.415122] [<8056ac74>] (__driver_attach) from [<8056880c>] (bus_for_each_dev+0x68/0xa0) [ 67.426628] r6:8056ac74 r5:7f65e034 r4:00000000 r3:00000027 [ 67.434017] [<805687a4>] (bus_for_each_dev) from [<8056a1cc>] (driver_attach+0x28/0x30) [ 67.445394] r6:80c6ddc8 r5:b7368f80 r4:7f65e034 [ 67.451703] [<8056a1a4>] (driver_attach) from [<80569c24>] (bus_add_driver+0x194/0x21c) [ 67.463081] [<80569a90>] (bus_add_driver) from [<8056b504>] (driver_register+0x8c/0x124) [ 67.474560] r7:80c6ddc8 r6:7f65e034 r5:00000000 r4:7f65e034 [ 67.481964] [<8056b478>] (driver_register) from [<805df510>] (usb_register_driver+0x74/0x140) [ 67.493901] r5:00000000 r4:7f65e000 [ 67.499131] [<805df49c>] (usb_register_driver) from [<7f661024>] (mt76x0_driver_init+0x24/0x1000 [mt76x0u]) [ 67.512258] r9:00000001 r8:7f65e308 r7:00000000 r6:80c08d48 r5:7f661000 r4:7f65e2c0 [ 67.523404] [<7f661000>] (mt76x0_driver_init [mt76x0u]) from [<80102f6c>] (do_one_initcall+0x4c/0x210) [ 67.536142] [<80102f20>] (do_one_initcall) from [<801ae63c>] (do_init_module+0x6c/0x21c) [ 67.547639] r8:7f65e308 r7:80c08d48 r6:b65f0ac0 r5:7f65e2c0 r4:7f65e2c0 [ 67.556129] [<801ae5d0>] (do_init_module) from [<801ad68c>] (load_module+0x1d10/0x2304) Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05mwifiex: don't advertise IBSS features without FW supportBrian Norris1-3/+7
[ Upstream commit 6f21ab30469d670de620f758330aca9f3433f693 ] As it is, doing something like # iw phy phy0 interface add foobar type ibss on a firmware that doesn't have ad-hoc support just yields failures of HostCmd_CMD_SET_BSS_MODE, which happened to return a '-1' error code (-EPERM? not really right...) and sometimes may even crash the firmware along the way. Let's parse the firmware capability flag while registering the wiphy, so we don't allow attempting IBSS at all, and we get a proper -EOPNOTSUPP from nl80211 instead. Fixes: e267e71e68ae ("mwifiex: Disable adhoc feature based on firmware capability") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05mlxsw: spectrum: Avoid -Wformat-truncation warningsFlorian Fainelli1-2/+2
[ Upstream commit ab2c4e2581ad32c28627235ff0ae8c5a5ea6899f ] Give precision identifiers to the two snprintf() formatting the priority and TC strings to avoid producing these two warnings: drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_prio_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:37: warning: '%d' directive output may be truncated writing between 1 and 3 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:3: note: 'snprintf' output between 3 and 36 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_prio_stats[i].str, prio); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_tc_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:37: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:3: note: 'snprintf' output between 3 and 44 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_tc_stats[i].str, tc); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05e1000e: Fix -Wformat-truncation warningsFlorian Fainelli1-2/+2
[ Upstream commit 135e7245479addc6b1f5d031e3d7e2ddb3d2b109 ] Provide precision hints to snprintf() since we know the destination buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the following warnings: drivers/net/ethernet/intel/e1000e/netdev.c: In function 'e1000_request_msix': drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-rx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->rx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->rx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-rx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-tx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->tx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->tx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-tx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05veth: Fix -Wformat-truncationFlorian Fainelli1-1/+2
[ Upstream commit abdf47aab4123ece48877cab4153db44fe4dc340 ] Provide a precision hint to snprintf() in order to eliminate a -Wformat-truncation warning provided below. A maximum of 11 characters is allowed to reach a maximum of 32 - 1 characters given a possible maximum value of queues using up to UINT_MAX which occupies 10 characters. Incidentally 11 is the number of characters for "xdp_packets" which is the largest string we append. drivers/net/veth.c: In function 'veth_get_strings': drivers/net/veth.c:118:47: warning: '%s' directive output may be truncated writing up to 31 bytes into a region of size between 12 and 21 [-Wformat-truncation=] snprintf(p, ETH_GSTRING_LEN, "rx_queue_%u_%s", ^~ drivers/net/veth.c:118:5: note: 'snprintf' output between 12 and 52 bytes into a destination of size 32 snprintf(p, ETH_GSTRING_LEN, "rx_queue_%u_%s", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ i, veth_rq_stats_desc[j].desc); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05net: hns3: fix setting of the hns reset_type for rdma hw errorsShiju Jose1-16/+20
[ Upstream commit eb4c2ccbad6c688be791e0c08640a40124558c03 ] Presently the hns reset_type for the roce errors is set in the hclge_log_and_clear_rocee_ras_error function. This function is also called to detect and clear roce errors while enabling the rdma error interrupts. However there is no hns reset requested for this case. This can cause issue of wrong reset_type used with subsequent hns reset as the reset_type set in the above case was not cleared. This patch moves setting of hns reset_type for the roce errors from hclge_log_and_clear_rocee_ras_error function to hclge_handle_rocee_ras_error. Fixes: 630ba007f475 ("net: hns3: add handling of RDMA RAS errors") Reported-by: Huazhong Tan <tanhuazhong@huawei.com> Reported-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05net: dsa: mv88e6xxx: Add lockdep classes to fix false positive splatAndrew Lunn1-0/+8
[ Upstream commit f6d9758b12660484b6639364cc406da92a918c96 ] The following false positive lockdep splat has been observed. ====================================================== WARNING: possible circular locking dependency detected 4.20.0+ #302 Not tainted ------------------------------------------------------ systemd-udevd/160 is trying to acquire lock: edea6080 (&chip->reg_lock){+.+.}, at: __setup_irq+0x640/0x704 but task is already holding lock: edff0340 (&desc->request_mutex){+.+.}, at: __setup_irq+0xa0/0x704 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&desc->request_mutex){+.+.}: mutex_lock_nested+0x1c/0x24 __setup_irq+0xa0/0x704 request_threaded_irq+0xd0/0x150 mv88e6xxx_probe+0x41c/0x694 [mv88e6xxx] mdio_probe+0x2c/0x54 really_probe+0x200/0x2c4 driver_probe_device+0x5c/0x174 __driver_attach+0xd8/0xdc bus_for_each_dev+0x58/0x7c bus_add_driver+0xe4/0x1f0 driver_register+0x7c/0x110 mdio_driver_register+0x24/0x58 do_one_initcall+0x74/0x2e8 do_init_module+0x60/0x1d0 load_module+0x1968/0x1ff4 sys_finit_module+0x8c/0x98 ret_fast_syscall+0x0/0x28 0xbedf2ae8 -> #0 (&chip->reg_lock){+.+.}: __mutex_lock+0x50/0x8b8 mutex_lock_nested+0x1c/0x24 __setup_irq+0x640/0x704 request_threaded_irq+0xd0/0x150 mv88e6xxx_g2_irq_setup+0xcc/0x1b4 [mv88e6xxx] mv88e6xxx_probe+0x44c/0x694 [mv88e6xxx] mdio_probe+0x2c/0x54 really_probe+0x200/0x2c4 driver_probe_device+0x5c/0x174 __driver_attach+0xd8/0xdc bus_for_each_dev+0x58/0x7c bus_add_driver+0xe4/0x1f0 driver_register+0x7c/0x110 mdio_driver_register+0x24/0x58 do_one_initcall+0x74/0x2e8 do_init_module+0x60/0x1d0 load_module+0x1968/0x1ff4 sys_finit_module+0x8c/0x98 ret_fast_syscall+0x0/0x28 0xbedf2ae8 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&desc->request_mutex); lock(&chip->reg_lock); lock(&desc->request_mutex); lock(&chip->reg_lock); &desc->request_mutex refer to two different mutex. #1 is the GPIO for the chip interrupt. #2 is the chained interrupt between global 1 and global 2. Add lockdep classes to the GPIO interrupt to avoid this. Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05ice: fix ice_remove_rule_internal vsi_list handlingJacob Keller1-2/+13
[ Upstream commit f9264dd687f8d3f9104c9900f8f3e5e419f27c55 ] When adding multiple VLANs to the same VSI, the ice_add_vlan code will share the VSI list, so as not to create multiple unnecessary VSI lists. Consider the following flow ice_add_vlan(hw, <VSI 0 VID 7, VSI 0 VID 8, VSI 0 VID 9>) Where we add three VLAN filters for VIDs 7, 8, and 9, all for VSI 0. The ice_add_vlan will create a single vsi_list and share it among all the filters. Later, if we try to remove a VLAN, ice_remove_vlan(hw, <VSI 0 VID 7>) Then the removal code will update the vsi_list and remove VSI 0 from it. But, since the vsi_list is shared, this breaks the list for the other users who reference it. We actually even free the VSI list memory, and may result in segmentation faults. This is due to the way that VLAN rule share VSI lists with reference counts, and is caused because we call ice_rem_update_vsi_list even when the ref_cnt is greater than one. To fix this, handle the case where ref_cnt is greater than one separately. In this case, we need to remove the associated rule without modifying the vsi_list, since it is currently being referenced by another rule. Instead, we just need to decrement the VSI list ref_cnt. The case for handling sharing of VSI lists with multiple VSIs is not currently supported by this code. No such rules will be created today, and this code will require changes if/when such code is added. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05net: dsa: mv88e6xxx: Default CMODE to 1000BaseX only on 6390XMarek Behún1-0/+2
[ Upstream commit 65b034cf5c1766492aa107958149b440889480be ] Commit 787799a9d555 sets the SERDES interfaces of 6390 and 6390X to 1000BaseX, but this is only needed on 6390X, since there are SERDES interfaces which can be used on lower ports on 6390. This commit fixes this by returning to previous behaviour on 6390. (Previous behaviour means that CMODE is not set at all if requested mode is NA). This is needed on Turris MOX, where the 88e6190 is connected to CPU in 2500BaseX mode. Fixes: 787799a9d555 ("net: dsa: mv88e6xxx: Default ports 9/10 6390X CMODE to 1000BaseX") Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05ath10k: don't report unset rssi values to mac80211Alagu Sankar1-3/+9
[ Upstream commit 7d444522303177f3a3c09b9abb104ddeea470a70 ] The SDIO firmware does not provide RSSI value to the host, it's only set to zero. In that case don't report the value to mac80211. One risk here is that value zero might be a valid value with other firmware, currently there's no way to detect that. Without the fix, the rssi value indicated by iw changes between the actual value and -95. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00005-QCARMSWP-1. Co-developed-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Alagu Sankar <alagusankar@silex-india.com> Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05ath10k: Fix the wrong updation of BW in tx_stats debugfs entrySurabhi Vishnoi2-4/+5
[ Upstream commit ef9051c72ab7bc664e8047c55ac74bdb1c7fa3ee ] Currently, the bandwidth is updated wrongly in BW table in tx_stats debugfs per sta as there is difference in number of bandwidth type in mac80211 and driver stats table. This leads to bandwidth getting updated at wrong index in bandwidth table in tx_stats. Fix this index mismatch between mac80211 and driver stats table (BW table) by making the number of bandwidth type in driver compatible with mac80211. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05mt76: fix a leaked reference by adding a missing of_node_putWen Yang1-8/+16
[ Upstream commit 34e022d8b780a03902d82fb3997ba7c7b1f40c81 ] The call to of_find_node_by_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/wireless/mediatek/mt76/eeprom.c:58:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:61:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:67:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:70:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. ./drivers/net/wireless/mediatek/mt76/eeprom.c:72:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05wil6210: check null pointer in _wil_cfg80211_merge_extra_iesAlexei Avshalom Lazar1-3/+11
[ Upstream commit de77a53c2d1e8fb3621e63e8e1f0f0c9a1a99ff7 ] ies1 or ies2 might be null when code inside _wil_cfg80211_merge_extra_ies access them. Add explicit check for null and make sure ies1/ies2 are not accessed in such a case. spos might be null and be accessed inside _wil_cfg80211_merge_extra_ies. Add explicit check for null in the while condition statement and make sure spos is not accessed in such a case. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05enic: fix build warning without CONFIG_CPUMASK_OFFSTACKArnd Bergmann1-3/+3
[ Upstream commit 43d281662fdb46750d49417559b71069f435298d ] The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to dynamically allocate a struct member, but this is normally intended for local variables. Building with clang, I get a warning for a few locations that check the address of the cpumask_var_t: drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] As far as I can tell, the code is still correct, as the truth value of the pointer is what we need in this configuration. To get rid of the warning, use cpumask_available() instead of checking the pointer directly. Fixes: 322cf7e3a4e8 ("enic: assign affinity hint to interrupts") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05net: stmmac: Avoid sometimes uninitialized Clang warningsNathan Chancellor1-3/+3
[ Upstream commit df103170854e87124ee7bdd2bca64b178e653f97 ] When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] Clang is concerned with the use of stmmac_do_void_callback (which stmmac_get_timestamp and stmmac_config_sub_second_increment wrap), as it may fail to initialize these values if the if condition was ever false (meaning the callbacks don't exist). It's not wrong because the callbacks (get_timestamp and config_sub_second_increment respectively) are the ones that initialize the variables. While it's unlikely that the callbacks are ever going to disappear and make that condition false, we can easily avoid this warning by zero initialize the variables. Link: https://github.com/ClangBuiltLinux/linux/issues/384 Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05net/mlx5: Avoid panic when setting vport mac, getting vport configTonghao Zhang1-2/+2
[ Upstream commit 6e77c413e8e73d0f36b5358b601389d75ec4451c ] If we try to set VFs mac address on a VF (not PF) net device, the kernel will be crash. The commands are show as below: $ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs $ ip link set $MLX_VF0 vf 0 mac 00:11:22:33:44:00 [exception RIP: mlx5_eswitch_set_vport_mac+41] [ffffb8b7079e3688] do_setlink at ffffffff8f67f85b [ffffb8b7079e37a8] __rtnl_newlink at ffffffff8f683778 [ffffb8b7079e3b68] rtnl_newlink at ffffffff8f683a63 [ffffb8b7079e3b90] rtnetlink_rcv_msg at ffffffff8f67d812 [ffffb8b7079e3c10] netlink_rcv_skb at ffffffff8f6b88ab [ffffb8b7079e3c60] netlink_unicast at ffffffff8f6b808f [ffffb8b7079e3ca0] netlink_sendmsg at ffffffff8f6b8412 [ffffb8b7079e3d18] sock_sendmsg at ffffffff8f6452f6 [ffffb8b7079e3d30] ___sys_sendmsg at ffffffff8f645860 [ffffb8b7079e3eb0] __sys_sendmsg at ffffffff8f647a38 [ffffb8b7079e3f38] do_syscall_64 at ffffffff8f00401b [ffffb8b7079e3f50] entry_SYSCALL_64_after_hwframe at ffffffff8f80008c and [exception RIP: mlx5_eswitch_get_vport_config+12] [ffffa70607e57678] mlx5e_get_vf_config at ffffffffc03c7f8f [mlx5_core] [ffffa70607e57688] do_setlink at ffffffffbc67fa59 [ffffa70607e577a8] __rtnl_newlink at ffffffffbc683778 [ffffa70607e57b68] rtnl_newlink at ffffffffbc683a63 [ffffa70607e57b90] rtnetlink_rcv_msg at ffffffffbc67d812 [ffffa70607e57c10] netlink_rcv_skb at ffffffffbc6b88ab [ffffa70607e57c60] netlink_unicast at ffffffffbc6b808f [ffffa70607e57ca0] netlink_sendmsg at ffffffffbc6b8412 [ffffa70607e57d18] sock_sendmsg at ffffffffbc6452f6 [ffffa70607e57d30] ___sys_sendmsg at ffffffffbc645860 [ffffa70607e57eb0] __sys_sendmsg at ffffffffbc647a38 [ffffa70607e57f38] do_syscall_64 at ffffffffbc00401b [ffffa70607e57f50] entry_SYSCALL_64_after_hwframe at ffffffffbc80008c Fixes: a8d70a054a718 ("net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager") Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05net/mlx5: Avoid panic when setting vport rateTonghao Zhang1-4/+9
[ Upstream commit 24319258660a84dd77f4be026a55b10a12524919 ] If we try to set VFs rate on a VF (not PF) net device, the kernel will be crash. The commands are show as below: $ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs $ ip link set $MLX_VF0 vf 0 max_tx_rate 2 min_tx_rate 1 If not applied the first patch ("net/mlx5: Avoid panic when setting vport mac, getting vport config"), the command: $ ip link set $MLX_VF0 vf 0 rate 100 can also crash the kernel. [ 1650.006388] RIP: 0010:mlx5_eswitch_set_vport_rate+0x1f/0x260 [mlx5_core] [ 1650.007092] do_setlink+0x982/0xd20 [ 1650.007129] __rtnl_newlink+0x528/0x7d0 [ 1650.007374] rtnl_newlink+0x43/0x60 [ 1650.007407] rtnetlink_rcv_msg+0x2a2/0x320 [ 1650.007484] netlink_rcv_skb+0xcb/0x100 [ 1650.007519] netlink_unicast+0x17f/0x230 [ 1650.007554] netlink_sendmsg+0x2d2/0x3d0 [ 1650.007592] sock_sendmsg+0x36/0x50 [ 1650.007625] ___sys_sendmsg+0x280/0x2a0 [ 1650.007963] __sys_sendmsg+0x58/0xa0 [ 1650.007998] do_syscall_64+0x5b/0x180 [ 1650.009438] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate") Cc: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05net/mlx5e: Fix access to non-existing receive queueTariq Toukan1-0/+3
[ Upstream commit c475e11e82d16133304321bae285c5c1d4cfc856 ] In case number of channels is changed while interface is down, RSS indirection table is mistakenly not modified accordingly, causing access to out-of-range non-existing object. Fix by updating the RSS indireciton table also in the early return flow of interface down. Fixes: fb35c534b788 ("net/mlx5e: Fix NULL pointer derefernce in set channels error flow") Fixes: bbeb53b8b2c9 ("net/mlx5e: Move RSS params to a dedicated struct") Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Tested-by: Maria Pasechnik <mariap@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-04net: npcm: use bitmap functions on link mode paramsBenjamin Fair1-2/+2
This fixes a compilation error caused by the phy_device "supported" and "advertising" parameters switching from u32 to bitmap. Fixes: 35998b5c4073 ("net: npcm: add NPCM7xx Ethernet MAC controller") OpenBMC-Staging-Count: 1 Signed-off-by: Benjamin Fair <benjaminfair@google.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-04-03Merge tag 'v5.0.6' into dev-5.0Joel Stanley18-101/+124
This is the 5.0.6 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-04-03mt76x02u: use usb_bulk_msg to upload firmwareStanislaw Gruszka3-37/+29
commit 5de4db8fcb6d6fc7d9064c22841211790c0ab81b upstream. We don't need to send firmware data asynchronously, much simpler is just use synchronous usb_bulk_msg(). [ stable note: this patch was originally developed as cleanup, but it remove incorrect usage of page_frag_alloc(): alloc more than PAGE_SIZE and create not ARCH_DMA_MINALIGN dma buffers needed at least for performance reason. Was tested on 5.0 and 4.20, see https://bugzilla.kernel.org/show_bug.cgi?id=202673 and https://bugzilla.kernel.org/show_bug.cgi?id=202241 ] Tested-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03net: dsa: qca8k: remove leftover phy accessorsChristian Lamparter1-18/+0
commit 1eec7151ae0e134bd42e3f128066b2ff8da21393 upstream. This belated patch implements Andrew Lunn's request of "remove the phy_read() and phy_write() functions." <https://lore.kernel.org/patchwork/comment/902734/> While seemingly harmless, this causes the switch's user port PHYs to get registered twice. This is because the DSA subsystem will create a slave mdio-bus not knowing that the qca8k_phy_(read|write) accessors operate on the external mdio-bus. So the same "bus" gets effectively duplicated. Cc: stable@vger.kernel.org Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03tun: add a missing rcu_read_unlock() in error pathEric Dumazet1-0/+1
commit 9180bb4f046064dfa4541488102703b402bb04e1 upstream. In my latest patch I missed one rcu_read_unlock(), in case device is down. Fixes: 4477138fa0ae ("tun: properly test for IFF_UP") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03r8169: fix cable re-plugging issueHeiner Kallweit1-1/+1
[ Upstream commit 23c78343ec36990709b636a9e02bad814f4384ad ] Bartek reported that after few cable unplug/replug cycles suddenly replug isn't detected any longer. His system uses a RTL8106, I wasn't able to reproduce the issue with RTL8168g. According to his bisect the referenced commit caused the regression. As Realtek doesn't release datasheets or errata it's hard to say what's the actual root cause, but this change was reported to fix the issue. Fixes: 38caff5a445b ("r8169: handle all interrupt events in the hard irq handler") Reported-by: Bartosz Skrzypczak <barteks2x@gmail.com> Suggested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Tested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03net: phy: don't clear BMCR in genphy_soft_resetHeiner Kallweit1-1/+1
[ Upstream commit d29f5aa0bc0c321e1b9e4658a2a7e08e885da52a ] So far we effectively clear the BMCR register. Some PHY's can deal with this (e.g. because they reset BMCR to a default as part of a soft-reset) whilst on others this causes issues because e.g. the autoneg bit is cleared. Marvell is an example, see also thread [0]. So let's be a little bit more gentle and leave all bits we're not interested in as-is. This change is needed for PHY drivers to properly deal with the original patch. [0] https://marc.info/?t=155264050700001&r=1&w=2 Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Tested-by: Phil Reid <preid@electromag.com.au> Tested-by: liweihang <liweihang@hisilicon.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03net: dsa: mv88e6xxx: fix few issues in mv88e6390x_port_set_cmodeHeiner Kallweit1-8/+16
[ Upstream commit 5ceaeb99ffb4dc002d20f6ac243c19a85e2c7a76 ] This patches fixes few issues in mv88e6390x_port_set_cmode(). 1. When entering the function the old cmode may be 0, in this case mv88e6390x_serdes_get_lane() returns -ENODEV. As result we bail out and have no chance to set a new mode. Therefore deal properly with -ENODEV. 2. Once we have disabled power and irq, let's set the cached cmode to 0. This reflects the actual status and is cleaner if we bail out with an error in the following function calls. 3. The cached cmode is used by mv88e6390x_serdes_get_lane(), mv88e6390_serdes_power_lane() and mv88e6390_serdes_irq_enable(). Currently we set the cached mode to the new one at the very end of the function only, means until then we use the old one what may be wrong. 4. When calling mv88e6390_serdes_irq_enable() we use the lane value belonging to the old cmode. Get the lane belonging to the new cmode before calling this function. It's hard to provide a good "Fixes" tag because quite a few smaller changes have been done to the code in question recently. Fixes: d235c48b40d3 ("net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03thunderx: eliminate extra calls to put_page() for pages held for recyclingDean Nelson1-4/+3
[ Upstream commit cd35ef91490ad8049dd180bb060aff7ee192eda9 ] For the non-XDP case, commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_free_rbdr() that, when releasing the additional receive buffer page reference held for recycling, repeatedly calls put_page() until the page's _refcount goes to zero. Which results in the page being freed. This is not okay if the page's _refcount was greater than 1 (in the non-XDP case), because nicvf_free_rbdr() should not be subtracting more than what nicvf_alloc_page() had previously added to the page's _refcount, which was only 1 (in the non-XDP case). This can arise if a received packet is still being processed and the receive buffer (i.e., skb->head) has not yet been freed via skb_free_head() when nicvf_free_rbdr() is spinning through the aforementioned put_page() loop. If this should occur, when the received packet finishes processing and skb_free_head() is called, various problems can ensue. Exactly what, depends on whether the page has already been reallocated or not, anything from "BUG: Bad page state ... ", to "Unable to handle kernel NULL pointer dereference ..." or "Unable to handle kernel paging request...". So this patch changes nicvf_free_rbdr() to only call put_page() once for pages held for recycling (in the non-XDP case). Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03thunderx: enable page recycling for non-XDP caseDean Nelson1-12/+11
[ Upstream commit b3e208069477588c06f4d5d986164b435bb06e6d ] Commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_alloc_page() that inadvertently disables receive buffer page recycling for the non-XDP case by always NULL'ng the page pointer. This patch corrects two if-conditionals to allow for the recycling of non-XDP mode pages by only setting the page pointer to NULL when the page is not ready for recycling. Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03vxlan: Don't call gro_cells_destroy() before device is unregisteredZhiqiang Liu1-3/+1
[ Upstream commit cc4807bb609230d8959fd732b0bf3bd4c2de8eac ] Commit ad6c9986bcb62 ("vxlan: Fix GRO cells race condition between receive and link delete") fixed a race condition for the typical case a vxlan device is dismantled from the current netns. But if a netns is dismantled, vxlan_destroy_tunnels() is called to schedule a unregister_netdevice_queue() of all the vxlan tunnels that are related to this netns. In vxlan_destroy_tunnels(), gro_cells_destroy() is called and finished before unregister_netdevice_queue(). This means that the gro_cells_destroy() call is done too soon, for the same reasons explained in above commit. So we need to fully respect the RCU rules, and thus must remove the gro_cells_destroy() call or risk use after-free. Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer") Signed-off-by: Suanming.Mou <mousuanming@huawei.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03vrf: prevent adding upper devicesSabrina Dubroca1-0/+1
[ Upstream commit 1017e0987117c32783ba7c10fe2e7ff1456ba1dc ] VRF devices don't work with upper devices. Currently, it's possible to add a VRF device to a bridge or team, and to create macvlan, macsec, or ipvlan devices on top of a VRF (bond and vlan are prevented respectively by the lack of an ndo_set_mac_address op and the NETIF_F_VLAN_CHALLENGED feature flag). Fix this by setting the IFF_NO_RX_HANDLER flag (introduced in commit f5426250a6ec ("net: introduce IFF_NO_RX_HANDLER")). Cc: David Ahern <dsahern@gmail.com> Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03tun: properly test for IFF_UPEric Dumazet1-4/+11
[ Upstream commit 4477138fa0ae4e1b699786ef0600863ea6e6c61c ] Same reasons than the ones explained in commit 4179cb5a4c92 ("vxlan: test dev->flags & IFF_UP before calling netif_rx()") netif_rx_ni() or napi_gro_frags() must be called under a strict contract. At device dismantle phase, core networking clears IFF_UP and flush_all_backlogs() is called after rcu grace period to make sure no incoming packet might be in a cpu backlog and still referencing the device. A similar protocol is used for gro layer. Most drivers call netif_rx() from their interrupt handler, and since the interrupts are disabled at device dismantle, netif_rx() does not have to check dev->flags & IFF_UP Virtual drivers do not have this guarantee, and must therefore make the check themselves. Fixes: 1bd4978a88ac ("tun: honor IFF_UP in tun_get_user()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03net: usb: aqc111: Extend HWID table by QNAP deviceDmitry Bezrukov2-0/+23
[ Upstream commit b7ebee2f95fb0fa2862d5ed2de707f872c311393 ] New device of QNAP based on aqc111u Add this ID to blacklist of cdc_ether driver as well Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 21:09:37 +0300