summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2011-03-03wl12xx: Don't rely on runtime PM for toggling powerIdo Yariv1-2/+14
Runtime PM might not always be enabled. Even if it is enabled in the running kernel, it can still be temporarily disabled, for instance during suspend. Runtime PM is opportunistic in nature, and should not be relied on for toggling power. In case the interface is removed and re-added while runtime PM is disabled, the FW will fail to boot, as it is mandatory to toggle power between boots. For instance, this can happen during suspend in case one of the devices fails to suspend before the MMC host suspends, but after mac80211 was suspended. The interface will be removed and reactivated without toggling the power. Fix this by calling mmc_power_save_host/mmc_power_restore_host in wl1271_sdio_power_on/off functions. It will toggle the power to the chip even if runtime PM is disabled. The runtime PM functions should still be called to make sure runtime PM does not opportunistically power the chip off (e.g. after resuming from system suspend). Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-03-03wl12xx: fix the path to the wl12xx firmwaresSebastien Jan1-3/+3
In the linux-firmware git tree, the firmwares and the NVS are inside the ti-connectivity directory. Fix the filenames that the driver looks for accordingly. [Fixed commit message and merged with the latest changes. -- Luca] Signed-off-by: Sebastien Jan <s-jan@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-03-01Merge branch 'master' of ↵David S. Miller6-7/+15
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-03-01b43: N-PHY: rev3+: add static tablesRafał Miłecki2-2/+1131
This finally makes TX on OFDM rates possible on my dev with PHY rev 4. We still have lower performance than wl, but at least speeds around 15M become possible. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-01rtlwifi: Fix error registering rate-controlChaoming Li1-9/+6
When a second module such as rtl8192ce or rtl8192cu links to rtlwifi, the attempt to register a rate-control mechanism fails with the warning shown below. The fix is to select the RC mechanism when rtlwifi is initialized. WARNING: at net/mac80211/rate.c:42 ieee80211_rate_control_register+0xc9/0x100 [mac80211]() Hardware name: HP Pavilion dv2700 Notebook PC Modules linked in: arc4 ecb rtl8192ce rtl8192cu(+) rtl8192c_common rtlwifi snd_hda_codec_conexant amd74xx(+) ide_core sg mac80211 snd_hda_intel snd_hda_codec i2c_nforce2 snd_pcm snd_timer cfg80211 snd k8temp hwmon serio_raw joydev i2c_core soundcore snd_page_alloc rfkill forcedeth video ac battery button ext3 jbd mbcache sd_mod ohci_hcd ahci libahci libata scsi_mod ehci_hcd usbcore fan processor thermal Pid: 2227, comm: modprobe Not tainted 2.6.38-rc6-wl+ #468 Call Trace: [<ffffffff8104a3da>] ? warn_slowpath_common+0x7a/0xb0 [<ffffffff8104a425>] ? warn_slowpath_null+0x15/0x20 [<ffffffffa02de409>] ? ieee80211_rate_control_register+0xc9/0x100 [mac80211] [<ffffffffa03b3790>] ? rtl_rate_control_register+0x10/0x20 [rtlwifi] [<ffffffffa03ab9c9>] ? rtl_init_core+0x189/0x620 [rtlwifi] [<ffffffff811cfff8>] ? __raw_spin_lock_init+0x38/0x70 [<ffffffffa03b9dea>] ? rtl_usb_probe+0x709/0x82e [rtlwifi] [<ffffffffa002a7fd>] ? usb_match_one_id+0x3d/0xc0 [usbcore] [<ffffffffa002aae9>] ? usb_probe_interface+0xb9/0x160 [usbcore] [<ffffffff8126ed19>] ? driver_probe_device+0x89/0x1a0 [<ffffffff8126eed3>] ? __driver_attach+0xa3/0xb0 [<ffffffff8126ee30>] ? __driver_attach+0x0/0xb0 [<ffffffff8126dd4e>] ? bus_for_each_dev+0x5e/0x90 [<ffffffff8126e9d9>] ? driver_attach+0x19/0x20 [<ffffffff8126e5e8>] ? bus_add_driver+0x158/0x290 [<ffffffff8126f151>] ? driver_register+0x71/0x140 [<ffffffff811cfff8>] ? __raw_spin_lock_init+0x38/0x70 [<ffffffffa002a2cc>] ? usb_register_driver+0xdc/0x190 [usbcore] [<ffffffffa0013000>] ? rtl8192cu_init+0x0/0x20 [rtl8192cu] [<ffffffffa001301e>] ? rtl8192cu_init+0x1e/0x20 [rtl8192cu] [<ffffffff810002cf>] ? do_one_initcall+0x3f/0x180 [<ffffffff8108fd4b>] ? sys_init_module+0xbb/0x200 [<ffffffff81002c7b>] ? system_call_fastpath+0x16/0x1b ---[ end trace 726271c07a47439e ]--- rtlwifi:rtl_init_core():<0-0> rtl: Unable to register rtl_rc,use default RC !! ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Signed-off-by: Chaoming Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-01ath9k_htc: Handle BSSID/AID for multiple interfacesSujith Manoharan3-20/+81
The AID and BSSID should be set in the HW only for the first station interface or adhoc interface. Also, cancel the ANI timer in stop() for multi-STA scenario. And finally configure the HW beacon timers only for the first station interface. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28net: use pci_dev->revision, againSergei Shtylyov3-7/+3
Several more network drivers that read the device's revision ID from the PCI configuration register were merged after the commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all drivers to use pci_device->revision), so it's time to do another pass of conversion to using the 'revision' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28iwlwifi: move remaining iwl-agn-rx.c code into iwl-rx.cStanislaw Gruszka4-269/+225
There is no need to have separate iwl-agn-rx.c file after iwlegacy split. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28iwlwifi: move check health code into iwl-rx.cStanislaw Gruszka9-183/+155
Remove check_plcp_health and check_ack_health ops methods, they are unneeded after iwlegacy driver split. Merge check health code into to iwl-rx.c and make functions static. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28iwlwifi: add {ack,plpc}_check module parametersStanislaw Gruszka4-2/+15
Add module ack_check, and plcp_check parameters. Ack_check is disabled by default since is proved that check ack health can cause troubles. Plcp_check is enabled by default. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28iwlegacy: fix dma mappings and skbs leakStanislaw Gruszka3-27/+62
Fix possible dma mappings and skbs introduced by commit 470058e0ad82fcfaaffd57307d8bf8c094e8e9d7 "iwlwifi: avoid Tx queue memory allocation in interface down". Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28iwlwifi: fix dma mappings and skbs leakStanislaw Gruszka3-26/+59
Since commit commit 470058e0ad82fcfaaffd57307d8bf8c094e8e9d7 "iwlwifi: avoid Tx queue memory allocation in interface down" we do not unmap dma and free skbs when down device and there is pending transfer. What in consequence may cause that system hung (waiting for free skb's) when performing shutdown at iptables module unload. DMA leak manifest itself following warning: WARNING: at lib/dma-debug.c:689 dma_debug_device_change+0x15a/0x1b0() Hardware name: HP xw8600 Workstation pci 0000:80:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=240] Modules linked in: iwlagn(-) aes_x86_64 aes_generic fuse cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ext3 jbd dm_mirror dm_region_hash dm_log dm_mod uinput hp_wmi sparse_keymap sg wmi microcode serio_raw tg3 arc4 ecb shpchp mac80211 cfg80211 rfkill ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif firewire_ohci firewire_core crc_itu_t mptsas mptscsih mptbase scsi_transport_sas pata_acpi ata_generic ata_piix ahci libahci floppy nouveau ttm drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: iwlagn] Pid: 9131, comm: rmmod Tainted: G W 2.6.38-rc6-wl+ #33 Call Trace: [<ffffffff810649ef>] ? warn_slowpath_common+0x7f/0xc0 [<ffffffff81064ae6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff812320ab>] ? dma_debug_device_change+0xdb/0x1b0 [<ffffffff8123212a>] ? dma_debug_device_change+0x15a/0x1b0 [<ffffffff8149dc18>] ? notifier_call_chain+0x58/0xb0 [<ffffffff8108e370>] ? __blocking_notifier_call_chain+0x60/0x90 [<ffffffff8108e3b6>] ? blocking_notifier_call_chain+0x16/0x20 [<ffffffff812f570c>] ? __device_release_driver+0xbc/0xe0 [<ffffffff812f5808>] ? driver_detach+0xd8/0xe0 [<ffffffff812f45d1>] ? bus_remove_driver+0x91/0x100 [<ffffffff812f6022>] ? driver_unregister+0x62/0xa0 [<ffffffff8123d5d4>] ? pci_unregister_driver+0x44/0xa0 [<ffffffffa05632d1>] ? iwl_exit+0x15/0x1c [iwlagn] [<ffffffff810ab492>] ? sys_delete_module+0x1a2/0x270 [<ffffffff81498da9>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8100bf42>] ? system_call_fastpath+0x16/0x1b I still can observe above warning after apply patch, but it is very hard to reproduce it, and have count=1. Whereas that one is easy to reproduce using debugfs force_reset while transmitting data, and have very big counts eg. 240, like quoted here. So count=1 WARNING seems to be different issue that need to be resolved separately. v1 -> v2: fix infinity loop bug I made during "for" to "while" loop transition. v2 -> v3: remove unneeded EXPORT_SYMBOL Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28ath9k: Fix incorrect GPIO LED pin for AR9485Senthil Balasubramanian2-0/+3
AR9485 doesn't use the default GPIO pin for LED and GPIO 6 is actually used for this. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28ath9k: use generic mac80211 LED blinking codeFelix Fietkau4-170/+61
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28p54: fix a NULL pointer dereference bugFelix Fietkau1-2/+5
If the RSSI calibration table was not found or not parsed properly, priv->rssi_db will be NULL, p54_rssi_find needs to be able to deal with that. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28rtlwifi: fix places where uninitialized data is usedAlessio Igor Bogani1-3/+3
drivers/net/wireless/rtlwifi/rtl8192ce/trx.c: In function ‘rtl92ce_rx_query_desc’: drivers/net/wireless/rtlwifi/rtl8192ce/trx.c:255:5: warning: ‘rf_rx_num’ may be used uninitialized in this function drivers/net/wireless/rtlwifi/rtl8192ce/trx.c:257:12: warning: ‘total_rssi’ may be used uninitialized in this function drivers/net/wireless/rtlwifi/rtl8192ce/trx.c:466:6: warning: ‘weighting’ may be used uninitialized in this function This work was supported by a hardware donation from the CE Linux Forum. Signed-off-by: Alessio Igor Bogani <abogani@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28rtlwifi: Add the missing rcu_read_lock/unlockAlessio Igor Bogani3-2/+12
=================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- net/mac80211/sta_info.c:125 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 5 locks held by wpa_supplicant/468: #0: (rtnl_mutex){+.+.+.}, at: [<c1465d84>] rtnl_lock+0x14/0x20 #1: (&rdev->mtx){+.+.+.}, at: [<f84b8c2b>] cfg80211_mgd_wext_siwfreq+0x6b/0x170 [cfg80211] #2: (&rdev->devlist_mtx){+.+.+.}, at: [<f84b8c37>] cfg80211_mgd_wext_siwfreq+0x77/0x170 [cfg80211] #3: (&wdev->mtx){+.+.+.}, at: [<f84b8c44>] cfg80211_mgd_wext_siwfreq+0x84/0x170 [cfg80211] #4: (&rtlpriv->locks.conf_mutex){+.+.+.}, at: [<f8506476>] rtl_op_bss_info_changed+0x26/0xc10 [rtlwifi] stack backtrace: Pid: 468, comm: wpa_supplicant Not tainted 2.6.38-rc6+ #79 Call Trace: [<c108806a>] ? lockdep_rcu_dereference+0xaa/0xb0 [<f8523d2c>] ? sta_info_get_bss+0x19c/0x1b0 [mac80211] [<f8523d62>] ? ieee80211_find_sta+0x22/0x40 [mac80211] [<f850661c>] ? rtl_op_bss_info_changed+0x1cc/0xc10 [rtlwifi] [<c153671c>] ? __mutex_unlock_slowpath+0x14c/0x160 [<c153673d>] ? mutex_unlock+0xd/0x10 [<f8507180>] ? rtl_op_config+0x120/0x310 [rtlwifi] [<c10896db>] ? trace_hardirqs_on+0xb/0x10 [<f8522169>] ? ieee80211_bss_info_change_notify+0xf9/0x1f0 [mac80211] [<f8506450>] ? rtl_op_bss_info_changed+0x0/0xc10 [rtlwifi] [<f853646f>] ? ieee80211_set_channel+0xbf/0xd0 [mac80211] [<f84b5f41>] ? cfg80211_set_freq+0x121/0x180 [cfg80211] [<f85363b0>] ? ieee80211_set_channel+0x0/0xd0 [mac80211] [<f84b8ceb>] ? cfg80211_mgd_wext_siwfreq+0x12b/0x170 [cfg80211] [<f84b87eb>] ? cfg80211_wext_siwfreq+0x9b/0x100 [cfg80211] [<c153b98b>] ? sub_preempt_count+0x7b/0xb0 [<c150f874>] ? ioctl_standard_call+0x74/0x3b0 [<c1465d84>] ? rtnl_lock+0x14/0x20 [<f84b8750>] ? cfg80211_wext_siwfreq+0x0/0x100 [cfg80211] [<c14568bd>] ? __dev_get_by_name+0x8d/0xb0 [<c150fddb>] ? wext_handle_ioctl+0x16b/0x180 [<f84b8750>] ? cfg80211_wext_siwfreq+0x0/0x100 [cfg80211] [<c145bc7a>] ? dev_ioctl+0x5ba/0x720 [<c108a947>] ? __lock_acquire+0x3e7/0x19b0 [<c1443b0b>] ? sock_ioctl+0x1eb/0x290 [<c108bfa5>] ? lock_release_non_nested+0x95/0x2f0 [<c1443920>] ? sock_ioctl+0x0/0x290 [<c114d74d>] ? do_vfs_ioctl+0x7d/0x5c0 [<c1112232>] ? might_fault+0x62/0xb0 [<c113e3c6>] ? fget_light+0x226/0x390 [<c1112278>] ? might_fault+0xa8/0xb0 [<c114dd17>] ? sys_ioctl+0x87/0x90 [<c1002f9f>] ? sysenter_do_call+0x12/0x38 This work was supported by a hardware donation from the CE Linux Forum. Signed-off-by: Alessio Igor Bogani <abogani@kernel.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28iwlwifi: remove duplicate initializationDan Carpenter1-1/+1
rate_mask is initialized again later so this can be removed. Btw, if rate_control_send_low(sta, priv_sta, txrc) returns false, that means that "sta" is non-NULL. That's why the second initialization of rate_mask is a little simpler than the first. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28Merge branch 'wireless-next-2.6' of ↵John W. Linville4-30/+158
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2011-02-28p54usb: add Senao NUB-350 usbidChristian Lamparter1-0/+1
Reported-by: Mark Davis Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28at76c50x-usb: fix warning caused by at76_mac80211_tx now returning voidJohn W. Linville1-1/+2
CC [M] drivers/net/wireless/at76c50x-usb.o drivers/net/wireless/at76c50x-usb.c: In function ‘at76_mac80211_tx’: drivers/net/wireless/at76c50x-usb.c:1759:4: warning: ‘return’ with a value, in function returning void This is fallout from commit 7bb4568372856688bc070917265bce0b88bb7d4d ("mac80211: make tx() operation return void"). Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28ath9k_htc: Fix an endian issueSujith Manoharan1-4/+5
The stream length/tag fields have to be in little endian format. Fixing this makes the driver work on big-endian platforms. Cc: stable@kernel.org Tested-by: raghunathan.kailasanathan@wipro.com Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-26iwlagn: enable BT session 2 type UART for 2000 seriesWey-Yi Guy4-35/+57
For 2000 series device, use session 2 type of BT UART message Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-26iwlagn: split BT page and inquiry UART msgWey-Yi Guy2-7/+12
Both inquiry and page was combine in frame7 of UART message, separate it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-26iwlagn: add BT Session Activity 2 UART message (BT -> WiFi)Wey-Yi Guy1-0/+78
additional UART message defines Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-26iwlagn: add bt config structure support for 2000 seriesWey-Yi Guy1-0/+23
2000 series has different bt config command structure, add support for it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-26iwlagn: name change for BT config commandWey-Yi Guy2-2/+2
No functional changes, name changes to reflect the structure used by 6000 series. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-02-26iwlegacy: change some symbols duplicated from iwlwifi directoryJohn W. Linville15-73/+71
drivers/net/wireless/iwlegacy/built-in.o:(.rodata+0x29f0): multiple definition of `iwl_rates' drivers/net/wireless/iwlwifi/built-in.o:(.rodata+0xa68): first defined here powerpc64-linux-ld: Warning: size of symbol `iwl_rates' changed from 143 in drivers/net/wireless/iwlwifi/built-in.o to 130 in drivers/net/wireless/iwlegacy/built-in.o drivers/net/wireless/iwlegacy/built-in.o:(.data+0x0): multiple definition of `bt_coex_active' drivers/net/wireless/iwlwifi/built-in.o:(.data+0x668): first defined here drivers/net/wireless/iwlegacy/built-in.o:(.rodata+0x750): multiple definition of `iwl_eeprom_band_1' drivers/net/wireless/iwlwifi/built-in.o:(.rodata+0x27d0): first defined here drivers/net/wireless/iwlegacy/built-in.o:(.rodata+0x3f0): multiple definition of `iwl_bcast_addr' drivers/net/wireless/iwlwifi/built-in.o:(.rodata+0x24f8): first defined here drivers/net/wireless/iwlegacy/built-in.o:(.bss+0x3d48): multiple definition of `iwl_debug_level' drivers/net/wireless/iwlwifi/built-in.o:(.bss+0x21950): first defined here Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25ath9k: Fix compilation warning.Vivek Natarajan1-1/+1
Initialize txq to avoid this warning: drivers/net/wireless/ath/ath9k/main.c: In function ‘ath9k_flush’: drivers/net/wireless/ath/ath9k/main.c:2138: warning: ‘txq’ may be used uninitialized in this function Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25ath9k: Cancel pll_work while disabling radio.Vivek Natarajan1-0/+4
pll_work should be cancelled on full_sleep or it may cause redundant chip reset. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25ath9k_hw: Fix pcie_serdes setting for AR9485 1.1 version.Vivek Natarajan1-4/+4
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25b43: fill PHY ctl word1 in TX header for N-PHYRafał Miłecki2-0/+79
This patch fixes tramissing on OFDM rates for PHYs 1 and 2. There is still something wrong with PHYs 3+. Tests has shown decreasing of performance on CCK rates by 1-2%, we have to live with that. Additionaly this noticeably reduces amount of PHY errors. They were mostly produced by auto-switching to higher rate for better performanced, which resulted in no transmit at all and PHY errors. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25iwlagn: fix iwlagn_check_needed_chainsJohannes Berg1-17/+41
This function was intended to calculate the number of RX chains needed, but could only work where the AP's streams were asymmetric, i.e. 2 TX and 3 RX or similar. In the case where IEEE80211_HT_MCS_TX_RX_DIFF was not set, this function would calculate the wrong information. Additionally, mac80211 didn't pass through the required values at all, so it couldn't work anyway. Rewrite the logic in this function and add appropriate comments to make it readable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25orinoco: Drop scan results with unknown channelsJoe Gunn1-0/+5
If the frequency can not be mapped to a channel structure log it and drop it. Signed-off-by: Joseph J. Gunn <armadefuego@yahoo.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: make tx() operation return voidJohannes Berg32-97/+57
The return value of the tx operation is commonly misused by drivers, leading to errors. All drivers will drop frames if they fail to TX the frame, and they must also properly manage the queues (if they didn't, mac80211 would already warn). Removing the ability for drivers to return a BUSY value also allows significant cleanups of the TX TX handling code in mac80211. Note that this also fixes a bug in ath9k_htc, the old "return -1" there was wrong. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> [ath5k] Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> [rt2x00] Acked-by: Larry Finger <Larry.Finger@lwfinger.net> [b43, rtl8187, rtlwifi] Acked-by: Luciano Coelho <coelho@ti.com> [wl12xx] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25iwlegacy: do not set tx power when channel is changingStanislaw Gruszka2-4/+11
Same fix as f844a709a7d8f8be61a571afc31dfaca9e779621 "iwlwifi: do not set tx power when channel is changing". Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25p54: implement set_coverage_classChristian Lamparter3-1/+21
The callback sets slot time as specified in IEEE 802.11-2007 section 17.3.8.6 and raises round trip delay accordingly. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25rndis_wlan: use power save only for BCM4320bJussi Kivilinna1-0/+3
BCM4320a breaks when enabling power save (bug 29732). So disable power save for anything but BCM4320b that is known to work. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25carl9170: add Airlive X.USB a/b/g/n USBIDJan Puk1-0/+2
"AirLive X.USB now works perfectly under a Linux environment!" Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25ath9k: correct ath9k_hw_set_interruptsStanislaw Gruszka1-2/+3
Commit 4df3071ebd92ef7115b409da64d0eb405d24a631 "ath9k_hw: optimize interrupt mask changes", changed ath9k_hw_set_interrupts function to enable interrupts regardless of function argument, what could possibly be wrong. Correct that behaviour and check "ints" arguments before enabling interrupts, also disable interrupts if ints do not have ATH9K_INT_GLOBAL flag set. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25Merge branch 'wireless-2.6' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2011-02-25rtlwifi: Need to include vmalloc.hDavid S. Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25rtl8192c: fix compilation errorsJohannes Berg2-12/+12
On my G5 this fails to compile with drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:701: error: __ksymtab__rtl92c_phy_txpwr_idx_to_dbm causes a section type conflict drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:701: error: __ksymtab__rtl92c_phy_txpwr_idx_to_dbm causes a section type conflict drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:677: error: __ksymtab__rtl92c_phy_dbm_to_txpwr_Idx causes a section type conflict drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c:677: error: __ksymtab__rtl92c_phy_dbm_to_txpwr_Idx causes a section type conflict since you can't export static functions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-24rtlwifi: rtl8192ce: rtl8192cu: Fix multiple def errors for allyesconfig buildLarry Finger34-185/+744
As noted by Stephan Rothwell, an allyesconfig build fails since rtl8192cu was merged with failures such as: drivers/net/wireless/rtlwifi/rtl8192cu/built-in.o: In function `rtl92c_phy_sw_chnl': (.opd+0xf30): multiple definition of `rtl92c_phy_sw_chnl' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.opd+0xb70): first defined here drivers/net/wireless/rtlwifi/rtl8192cu/built-in.o: In function `rtl92c_fill_h2c_cmd': (.opd+0x288): multiple definition of `rtl92c_fill_h2c_cmd' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.opd+0x288): first defined here These are caused because the code shared between rtl8192ce and rtl8192cu is included in both drivers. This has been fixed by creating a new modue that contains the shared code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-24rtlwifi: Eliminate udelay calls with too large valuesWilly Tarreau2-21/+0
On ARM, compilation of rtlwifi/efuse.c fails with the message: ERROR: "__bad_udelay" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined! On inspection, the faulty calls are in routine efuse_reset_loader(), a routine that is never used, and the faulty routine is deleted. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-24rtlwifi: Let rtlwifi build when PCI is not enabledWilly Tarreau1-1/+4
On systems where PCI does not exist, a build of rtlwifi will fail. Apply the same fix in case there are systems with PCI but not USB. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-24rtl8192cu: fix build error (vmalloc/vfree undefined)Willy Tarreau1-1/+1
On the ARM system, a build fails due to missing include. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-24rtlwifi: Fix build when RTL8192CU is selected, but RTL8192CE is notWilly Tarreau1-1/+1
The wireless Makefile does not build rtlwifi for rtl8192cu unless rtl8192ce is selected. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-24mac80211: rename RX_FLAG_TSFTJohannes Berg13-13/+13
The flag isn't very descriptive -- the intention is that the driver provides a TSF timestamp at the beginning of the MPDU -- make that clearer by renaming the flag to RX_FLAG_MACTIME_MPDU. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-24b43: N-PHY: rev1: restore PHY state after RSSI operationsRafał Miłecki1-2/+2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 22:21:12 +0300