summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2018-08-31iwlwifi: enable reading the value of delay in timestamp_marker cmdMordechay Goodstein1-1/+9
The user can validate what was written to the file by reading it, and check what is the default value before changing it. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: move he RX handling to a separate functionSara Sharon1-1/+1
The HE code is bloating the RX handling, and makes it too big. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: move he RX handling to a separate functionSara Sharon1-296/+286
The HE code is bloating the RX handling, and makes it too big. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: add support for RX_AMPDU_EOF bit for HE SULiad Kaufman1-1/+2
Current implementation turns this bit on only for HE MU. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: add bss color to radiotapLiad Kaufman1-0/+14
Add BSS color to the HE radiotap. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: add required include to iwl-fh.hGolan Ben Ami1-0/+2
Some variables are used in iwl-fh.h, but their type's definition isn't included. This may break compilation when using the file without including the necessary dependencies first. Add the required include to iwl-fh.h. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: add NOA and CSA to a probe responseGregory Greenman5-0/+204
A probe response built by a P2P GO should contain: 1. CSA/eCSA IE when relevant 2. If the corresponding probe request had P2P IE, then need to add P2P IE with NOA attributes. However, the NOA attributes and the updated channel switch counter are known only to the FW. The solution is that FW will send a notification with the relevant probe response data and the driver will save it and update the probe response accordingly. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: support new WoWLAN status FW APILuca Coelho5-54/+208
A new FW API has been added for WOWLAN_GET_STATUSES to support multiple GTK keys and IGTK keys. Check the respective TLV and use the new API when it is set. Let most of the code use the new version (v7) and convert the old version (v6) to the new one when needed. Also refactor some functions a bit so that they can be reused more easily. Particularly the part that calls WOWLAN_GET_STATUSES which is reused in D3 and D0i3. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: protect D0i3 code behind CONFIG_PMLuca Coelho3-2/+20
Runtime PM can only be used if CONFIG_PM is set. Move all the d0i3 code (which is essentially runtime PM) behind the CONFIG_PM flag. This prevents undefined usage of some functions when CONFIG_PM is not defined. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: remove duplicate if in iwl_mvm_setup_connection_keep()Luca Coelho1-4/+3
We repeated the same if twice in a row. Remove the second one and move the code block into the previous one. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: add d3 debug data supportShahar S Matityahu12-10/+85
During d3, the firmware records debug data into internal buffer if debug data collection occurs, collect the data that was written to the buffer Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: set the tid for non-QOS frames to zeroAvraham Stern2-7/+19
The tid for Non-QOS frames is set to IWL_MAX_TID_COUNT. This value is also used for configuring the queue for non-QOS data. However, this tid is used by the FW for management queues. As a result, the FW does not encrypt non-QOS data frames. Fix this by setting the tid for non-QOS data frames to zero, which is a valid value for data frames in the FW. This also fixes a bug in sending multicast frames, where the queues are allocated with tid == 0, but are sent with tid == 8, which may lead to unexpected behavior. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: runtime: avoid calling debugfs read functions more than onceNaftali Goldstein1-24/+87
Upon first calling read() on a debugfs file, invoke iwl_dbgfs_##name##_read and store the response buffer on the heap, so subsequent read() calls don't need to invoke said function again. This is done because cat etc will call read() repeatedly until EOF is reached (or read() returns 0), which in the current implementation will cause said function to be invoked multiple times. With the current implementation this can also cause buggy behavior in some weird edge cases where the first invocation returns a string of length n, and the second of length m>n: The last m-n characters of the second invocation will be printed to screen. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: remove unused TLC debugging commandsLuca Coelho1-60/+0
The iwl_dhc_tlc_cmd struct is not used, so remove it, including the iwl_tcl_debug_flags enumeration. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: turn timestamp marker cmd off by defaultMordechay Goodstein1-3/+0
Don't enable debugging timestamps by default, so we save power by not waking up the FW with timestamp commands. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo26-160/+856
ath.git patches for 4.20. Major changes: ath10k * limit available channels via DT ieee80211-freq-limit wil6210 * add 802.11r Fast Roaming support for AP and station modes * add support for channel 4
2018-08-28ath10k: limit available channels via DT ieee80211-freq-limitSven Eckelmann1-0/+2
Tri-band devices (1x 2.4GHz + 2x 5GHz) often incorporate special filters in the RX and TX path. These filtered channel can in theory still be used by the hardware but the signal strength is reduced so much that it makes no sense. There is already a DT property to limit the available channels but ath10k has to manually call this functionality to limit the currrently set wiphy channels further. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28wil6210: fix invalid memory access for rx_buff_mgmt debugfsDedy Lansky1-0/+3
Check rx_buff_mgmt is allocated before accessing its internal fields. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28wil6210: add FT roam support for AP and stationAhmad Masri8-57/+735
This feature is needed for enterprise APs and clients to enable fast roaming as defined in 802.11r between APs in the same ESS. On AP side, this feature is supported only when disable_ap_sme is enabled. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28wil6210: fix RX buffers release and unmapMaya Erez1-5/+10
RX SKBs are released in both wil6210 rmmod and RX handle. As there is no lock to protect the buffers DMA unmap, the SKB pointer in buff_arr is used to check if the buffer memory was already released. Setting wil->rx_buff_mgmt.buff_arr[buff_id].skb to NULL before the DMA memory unmap will prevent duplicate unmapping of the same memory. Move the buffer ID to the free list also in case the SKB is NULL. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28wil6210: prevent usage of tx ring 0 for eDMAMaya Erez2-4/+9
In enhanced DMA ring 0 is used for RX ring, hence TX ring 0 is an unused element in ring_tx and ring2cid_tid arrays. Initialize ring2cid_tid CID to WIL6210_MAX_CID to prevent a false match of CID 0. Go over the ring_tx and ring2cid_tid from wil_get_min_tx_ring_id and on to prevent access to index 0 in eDMA. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28wil6210: allocate rx reorder buffer only if rx reorder is enabledMaya Erez1-5/+7
wil_addba_rx_request allocates the rx reorder buffer regardless of use_rx_hw_reordering settings. Fix this by checking wil->use_rx_hw_reordering before allocating the reorder buffer. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28wil6210: set edma variables only for Talyn-MB devicesMaya Erez2-2/+1
use_rx_hw_reordering is already set to true in wil_set_capabilities for Talyn-MB devices. Remove its setting from wil_priv_init to prevent its activation for older chips. Similarly, move the setting of use_compressed_rx_status to wil_set_capabilities. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28wil6210: drop Rx multicast packets that are looped-back to STADedy Lansky1-1/+8
Delivering a looped-back multicast packet to network stack can cause higher layer protocols to fail like for example IPv6 DAD. In STA mode, upon receiving Rx multicast packet, check if the source MAC address is equal to our own MAC address and if so drop the packet. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28wil6210: add support for channel 4Alexei Avshalom Lazar4-1/+26
wil6210 supports channels 1-3 of the 60GHz band. New FW added support for channel 4. Add support for channel 4 also in wil6210 driver. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28wil6210: remove reset file from debugfsKarthick Gopalasubramanian1-27/+0
Reset file is not used and may cause race conditions with operational driver if used. Signed-off-by: Karthick Gopalasubramanian <kargop@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28ath6kl: Remove unnecessary parenthesesVarsha Rao1-1/+1
Remove extra parentheses to fix the clang warning of extraneous parentheses. Signed-off-by: Varsha Rao <rvarsha016@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28ath9k: fix tx99 with monitor mode interfaceFelix Fietkau4-20/+4
Tx99 is typically configured via a monitor mode interface, which does not get added to the driver as a vif. Since the code currently expects a configured virtual interface for tx99, enabling tx99 via debugfs fails. Since the vif is not needed anyway, remove all checks for it. Signed-off-by: Felix Fietkau <nbd@nbd.name> [kvalo@codeaurora.org: s/CPTCFG/CONFIG/] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28ath9k: remove unused array firstep_tableColin Ian King1-4/+0
Array firstep_table is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: 'firstep_table' defined but not used [-Wunused-const-variable=] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28ath9k: Remove unnecessary parenthesesVarsha Rao1-1/+1
Remove extra parentheses to fix the clang warning of extraneous parentheses. Signed-off-by: Varsha Rao <rvarsha016@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28ath10k: use struct_size() in kzalloc()Gustavo A. R. Silva1-16/+8
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28ath10k: schedule hardware restart if WMI command times outMartin Willi1-0/+6
When running in AP mode, ath10k sometimes suffers from TX credit starvation. The issue is hard to reproduce and shows up once in a few days, but has been repeatedly seen with QCA9882 and a large range of firmwares, including 10.2.4.70.67. Once the module is in this state, TX credits are never replenished, which results in "SWBA overrun" errors, as no beacons can be sent. Even worse, WMI commands run in a timeout while holding the conf mutex for three seconds each, making any further operations slow and the whole system unresponsive. The firmware/driver never recovers from that state automatically, and triggering TX flush or warm restarts won't work over WMI. So issue a hardware restart if a WMI command times out due to missing TX credits. This implies a connectivity outage of about 1.4s in AP mode, but brings back the interface and the whole system to a usable state. WMI command timeouts have not been seen in absent of this specific issue, so taking such drastic actions seems legitimate. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28ath10k: skip resetting rx filter for WCN3990Rakesh Pillai2-1/+21
WCN3990 has the MAC_PCU_ADDR1 configured properly and hence it will not send spurious ack frames during boot up. Hence the reset_rx_filter workaround is not needed for WCN3990. Add a hw_param to indicate if hardware rx filter reset is needed and skip the reset_rx_filter for WCN3990. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28cfg80211: Add support for 60GHz band channels 5 and 6Alexei Avshalom Lazar1-1/+1
The current support in the 60GHz band is for channels 1-4. Add support for channels 5 and 6. This requires enlarging ieee80211_channel.center_freq from u16 to u32. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-28mac80211_hwsim: Fix possible Spectre-v1 for hwsim_world_regdom_customJinbum Park1-0/+4
User controls @idx which to be used as index of hwsim_world_regdom_custom. So, It can be exploited via Spectre-like attack. (speculative execution) This kind of attack leaks address of hwsim_world_regdom_custom, It leads an attacker to bypass security mechanism such as KASLR. So sanitize @idx before using it to prevent attack. I leveraged strategy [1] to find and exploit this gadget. [1] https://github.com/jinb-park/linux-exploit/tree/master/exploit-remaining-spectre-gadget/ Signed-off-by: Jinbum Park <jinb.park7@gmail.com> [johannes: unwrap URL] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-28cfg80211: make wmm_rule part of the reg_rule structureStanislaw Gruszka1-45/+5
Make wmm_rule be part of the reg_rule structure. This simplifies the code a lot at the cost of having bigger memory usage. However in most cases we have only few reg_rule's and when we do have many like in iwlwifi we do not save memory as it allocates a separate wmm_rule for each channel anyway. This also fixes a bug reported in various places where somewhere the pointers were corrupted and we ended up doing a null-dereference. Fixes: 230ebaa189af ("cfg80211: read wmm rules from regulatory database") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> [rephrase commit message slightly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-28mac80211_hwsim: correct use of IEEE80211_VHT_CAP_RXSTBC_XDanek Duvall1-3/+0
The mac80211_hwsim driver intends to say that it supports up to four STBC receive streams, but instead it ends up saying something undefined. The IEEE80211_VHT_CAP_RXSTBC_X macros aren't independent bits that can be ORed together, but values. In this case, _4 is the appropriate one to use. Signed-off-by: Danek Duvall <duvall@comfychair.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-24wcn36xx: use dma_zalloc_coherent instead of allocator/memsetYueHaibing1-10/+9
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset 0. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-24wcn36xx: Use kmemdup instead of duplicating it in ↵YueHaibing1-2/+2
wcn36xx_smd_process_ptt_msg_rsp Replace calls to kmalloc followed by a memcpy with a direct call to kmemdup. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-24ath10k: fix kernel panic by moving pci flush after napi_disableTamizh chelvam2-3/+3
When continuously running wifi up/down sequence, the napi poll can be scheduled after the CE buffers being freed by ath10k_pci_flush Steps: In a certain condition, during wifi down below scenario might occur. ath10k_stop->ath10k_hif_stop->napi_schedule->ath10k_pci_flush->napi_poll(napi_synchronize). In the above scenario, CE buffer entries will be freed up and become NULL in ath10k_pci_flush. And the napi_poll has been invoked after the flush process and it will try to get the skb from the CE buffer entry and perform some action on that. Since the CE buffer already cleaned by pci flush this action will create NULL pointer dereference and trigger below kernel panic. Unable to handle kernel NULL pointer dereference at virtual address 0000005c PC is at ath10k_pci_htt_rx_cb+0x64/0x3ec [ath10k_pci] ath10k_pci_htt_rx_cb [ath10k_pci] ath10k_ce_per_engine_service+0x74/0xc4 [ath10k_pci] ath10k_ce_per_engine_service [ath10k_pci] ath10k_ce_per_engine_service_any+0x74/0x80 [ath10k_pci] ath10k_ce_per_engine_service_any [ath10k_pci] ath10k_pci_napi_poll+0x48/0xec [ath10k_pci] ath10k_pci_napi_poll [ath10k_pci] net_rx_action+0xac/0x160 net_rx_action __do_softirq+0xdc/0x208 __do_softirq irq_exit+0x84/0xe0 irq_exit __handle_domain_irq+0x80/0xa0 __handle_domain_irq gic_handle_irq+0x38/0x5c gic_handle_irq __irq_usr+0x44/0x60 Tested on QCA4019 and firmware version 10.4.3.2.1.1-00010 Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds3-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-08-16Merge tag 'pci-v4.19-changes' of ↵Linus Torvalds3-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ...
2018-08-15Merge branch 'pci/misc'Bjorn Helgaas1-6/+0
- Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) * pci/misc: PCI: Limit config space size for Netronome NFP5000 PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Unify PCI and normal DMA direction definitions PCI: Use IRQF_ONESHOT if pci_request_irq() called with no handler PCI: Call dma_debug_add_bus() for pci_bus_type from PCI core PCI: Mark fall-through switch cases before enabling -Wimplicit-fallthrough # Conflicts: # drivers/pci/hotplug/pciehp_ctrl.c
2018-08-15mac80211_hwsim: require at least one channelJohannes Berg1-0/+5
Syzbot continues to try to create mac80211_hwsim radios, and manages to pass parameters that are later checked with WARN_ON in cfg80211 - catch another one in hwsim directly. Reported-by: syzbot+2a12f11c306afe871c1f@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-15PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entryAndy Shevchenko1-6/+0
There are a lot of examples in the kernel where PCI_VDEVICE() is used and still looks not so convenient due to additional driver_data field attached. Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in shortest possible form. For example, before: { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), (kernel_ulong_t) &dwc3_pci_mrfld_properties, }, after: { PCI_DEVICE_DATA(INTEL, MRFLD, &dwc3_pci_mrfld_properties) }, Drivers can be converted later on in independent way. While here, remove the unused macro with the same name from Ralink wireless driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> # for rt2x00
2018-08-09b43legacy/leds: Ensure NUL-termination of LED name stringMichael Büsch1-1/+1
strncpy might not NUL-terminate the string, if the name equals the buffer size. Use strlcpy instead. Signed-off-by: Michael Buesch <m@bues.ch> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-09b43/leds: Ensure NUL-termination of LED name stringMichael Büsch1-1/+1
strncpy might not NUL-terminate the string, if the name equals the buffer size. Use strlcpy instead. Signed-off-by: Michael Buesch <m@bues.ch> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-09rtlwifi: btcoex: Fix if == else warnings in halbtc8723b2ant.cYueHaibing1-144/+36
Fix following coccinelle warning: ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2952:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2961:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3011:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3020:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3439:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3448:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3339:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3348:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3074:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3083:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3192:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3201:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3267:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3276:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3124:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3133:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2821:2-4: WARNING: possible condition with no effect (if == else) ./drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2830:2-4: WARNING: possible condition with no effect (if == else) Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-09iwlegacy: fix spelling mistake "acumulative" -> "accumulative"Colin Ian King1-1/+1
fix spelling mistake in rx stats text Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-09rsi: remove redundant variables bss, wh and temp_flash_contentColin Ian King1-9/+1
Variables bss, wh and temp_flash_content are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'bss' set but not used [-Wunused-but-set-variable] warning: variable 'wh' set but not used [-Wunused-but-set-variable] warning: variable 'temp_flash_content' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 04:28:32 +0300