summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2018-10-01mt76x0: use mt76_poll in mt76x0_set_wlan_stateLorenzo Bianconi1-15/+3
Use mt76_poll utility routine in mt76x0_set_wlan_state to check if the PLL/XTAL is ready Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x2: disable WLAN core before probeFelix Fietkau2-0/+5
If the WLAN core is still active during initialization, it might cause the MCU or DMA to hang. This can happen during soft reboot, so disable the core + clock early to avoid this issue. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: add quirk to disable 2.4GHz band for Archer T1UStanislaw Gruszka3-1/+13
TP-LINK Archer T1U do not support 2.4GHz band despite EEPROM reports that. Add quirk to mask out 2.4GHz support. Reported-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: use skb_pad() instead of __skb_pad()Hauke Mehrtens1-1/+1
mt76 uses __skb_pad() with free_on_error set to true, this is the same as calling skb_pad(). This patch does not change any functionality, but it makes it easier to backport this driver in backports, because skb_pad() is also available in older kernel versions. Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: usb: make rx page_frag_cache access atomicLorenzo Bianconi4-7/+14
Add rx_page_lock spinlock in order to make rx page fragment access atomic. This patch fixes the following crash that occasionally occurs during module loading/unloading BUG: unable to handle kernel paging request at ffff9f8322e19000 PGD 27ba01067 P4D 27ba01067 PUD 27ddba063 PMD 263b35063 PTE 8000000262e19061 Oops: 0003 [#1] SMP PTI CPU: 2 PID: 1766 Comm: systemd-udevd Not tainted 4.19.0-rc5+ #6 Hardware name: ASUSTeK COMPUTER INC. ESC2000 G2/Z9PE-D8 WS, BIOS 0405 03/19/2012 RIP: 0010:__memcpy+0x12/0x20 RSP: 0018:ffffba13849b3ad8 EFLAGS: 00010246 RAX: ffff9f8322e17004 RBX: 00000000000038f0 RCX: 000000000000031f RDX: 0000000000000000 RSI: ffffba13844cf058 RDI: ffff9f8322e18ffc RBP: 0000000000010c6c R08: 0000000000000000 R09: 0000607ec0000000 R10: 0000000000000003 R11: 0000000000003e2e R12: ffff9f8324cd9540 R13: 0000000000000000 R14: ffffba13849b3b30 R15: ffff9f8322e17000 FS: 00007fadec85b880(0000) GS:ffff9f833fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9f8322e19000 CR3: 0000000263428001 CR4: 00000000000606e0 Call Trace: mt76x02u_mcu_fw_send_data+0x16c/0x270 [mt76x02_usb] mt76x0u_probe+0x35a/0x598 [mt76x0u] usb_probe_interface+0x113/0x310 really_probe+0x1c8/0x400 driver_probe_device+0x5c/0x130 __driver_attach+0xec/0x110 bus_for_each_dev+0x50/0x90 bus_add_driver+0x1c0/0x280 driver_register+0x5b/0xe0 usb_register_driver+0x7c/0x140 do_one_initcall+0x44/0x19b do_init_module+0x5a/0x210 load_module+0x175c/0x1bc0 __do_sys_finit_module+0x97/0xc0 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fadeb6f1809 RSP: 002b:00007ffe548f9f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00007fadebdf0d89 RCX: 00007fadeb6f1809 RDX: 0000000000000000 RSI: 00007fadebdf0d89 RDI: 0000000000000006 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000246 R12: 0000560b9ef58ab0 R13: 0000560b9ef29800 R14: 0000560b9ef59040 R15: 0000000000020000 Fixes: c12128ce44b0 ("mt76: use a per rx queue page fragment cache") Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: report firmware version using ethtoolDavide Caratti5-0/+18
print fw_ver and build_ver members of struct mt76x02_fw_header, similarly to what appears in the output of 'dmesg' when the MCU firmware is loaded. Reported-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: include linux/module.h in files using MODULE_*Felix Fietkau5-0/+5
Fix source files using MODULE_* macros without including linux/module.h Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: phy: introduce mt76x0_phy_set_txpower routineLorenzo Bianconi3-7/+20
Add mt76x0_phy_set_txpower routine in order to configure base and per rate tx power gain. Moreover take into account txpower_conf in order to limit the tx power gain according to the bound provided by mac80211 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: use shared debugfs implementationLorenzo Bianconi2-81/+1
Use mt76 shared debugfs implementation and remove duplicated code in mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: remove eeprom dependency from mt76x0_get_power_infoLorenzo Bianconi5-81/+77
In order to unify eeprom parsing between mt76x0 and mt76x2 drivers, remove eeprom pointer dependency from mt76x0_get_power_info routine. Remove mt76x0_eeprom_params since it is now an empty structure Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: remove eeprom dependency from mt76x0_set_tx_power_per_rateLorenzo Bianconi5-111/+102
In order to unify eeprom parsing between mt76x0 and mt76x2 drivers, remove eeprom pointer dependency from mt76x0_set_tx_power_per_rate. Moreover use mt76_rate_power to store power vs rate calibration data. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: remove mt76x0_phy_set_tx_power and mt76x0_extra_power_over_macLorenzo Bianconi1-38/+0
Remove mt76x0_extra_power_over_mac and mt76x0_phy_set_tx_power routines since they are not actually used and tx power handling will be unified with mt76x2 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x02_rate_power_val in mt76x02-lib moduleLorenzo Bianconi2-41/+40
Move mt76x02_rate_power_val and mt76x2_sign_extend_optional utility routines in mt76x02_eeprom.h in order to reuse them in mt76x0 eeprom parsing Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move rate_txpower handler in mt76 debugfsLorenzo Bianconi2-10/+19
Move rate_txpower handler in mt76 debugfs in order to be reused in mt76x0 driver and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: add mt76x02_phy_set_txpower utility routineLorenzo Bianconi7-69/+133
Add mt76x02_phy_set_txpower utility routine in mt76x02_phy.c in order to be reused in mt76x0 tx power management code. Moreover move following routines in mt76x02-lib module: - mt76x02_tx_power_mask - mt76x02_get_max_rate_power - mt76x02_limit_rate_power - mt76x02_add_rate_power_offset Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76_rate_power in mt76_devLorenzo Bianconi8-43/+44
Move mt76_rate_power data structure from mt76x2_dev to mt76_dev in order to share it with mt76x0 driver. Moreover move txpower_conf and txpower_cur in mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: fix return value of mt76x02_wait_for_macStanislaw Gruszka1-1/+1
We need to return bool value in mt76x02_wait_for_mac. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 2735a6dd7df3 ("mt76: unify wait_for_mac") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: usb: remove WARN_ON in mt76u_get_rx_entry_lenLorenzo Bianconi1-3/+3
Remove not useful WARN_ON macros in mt76u_get_rx_entry_len routine since corrupted frames should just be silently discarded Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x2_tssi_enabled in mt76x02_eeprom.hLorenzo Bianconi5-26/+26
Move mt76x2_tssi_enabled and mt76x02_temp_tx_alc_enabled in mt76x02_eeprom.h in order to be reused in mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: unify parse hw capabilitiesLorenzo Bianconi1-25/+8
Unify parse hw capabilities with mt76x2 driver using mt76x02_eeprom_parse_hw_cap utility routine available in mt76x02-lib module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x02_eeprom_parse_hw_cap in mt76x02-lib moduleLorenzo Bianconi5-27/+27
Move mt76x02_eeprom_parse_hw_cap utility routine in mt76x02-lib module in order to be reused in mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: unify freq offset parsingLorenzo Bianconi5-18/+22
Unify frequency offset parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: unify temperature offset parsingLorenzo Bianconi5-10/+13
Unify temperature offset parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: unify rssi_offset parsingLorenzo Bianconi4-49/+11
Unify rssi_offset parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: unify lna_gain parsingLorenzo Bianconi5-40/+24
Unify lna gain parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: add mt76x02_get_rx_gain and mt76x02_get_lna_gain utility routinesLorenzo Bianconi3-43/+63
Add mt76x02_get_rx_gain and mt76x02_get_lna_gain utility routines for rx gain parsing. mt76x02_get_rx_gain and mt76x02_get_lna_gain will be reused for eeprom parsing in mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: remove mt76x0_set_country_reg routineLorenzo Bianconi3-42/+0
Remove mt76x0_set_country_reg routine for the moment since it is partial and it is not actually used Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x2_ext_pa_enabled routine in mt76x02_eeprom.cLorenzo Bianconi11-36/+33
Move mt76x2_ext_pa_enabled utility routine in mt76x02_eeprom.c and remove duplicated code. This is a preliminary patch to unify eeprom code between mt76x2 and mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x2_get_efuse_data in mt76x02-lib moduleLorenzo Bianconi6-101/+95
Move mt76x2_efuse_read and mt76x2_get_efuse_data in mt76x02_eeprom.c in order to be reused in mt76x0 driver for eeprom parsing Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x02_mac_setaddr in mt76x02-lib moduleLorenzo Bianconi7-44/+23
Move mt76x02_mac_setaddr utility routine in mt76x02-lib module and remove duplicated code. This is a preliminary patch to unify eeprom code between mt76x2 and mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x2_eeprom_get in mt76x02_eeprom.hLorenzo Bianconi9-60/+77
Move mt76x2_eeprom_get utility routine in mt76x02_eeprom.h since it will be used to parse mt76x0 eeprom in order to unify eeprom support between mt76x2 and mt76x0 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move eeprom utility routines in mt76x02_eeprom.hLorenzo Bianconi3-58/+38
Move shared eeprom utility routines in mt76x02_eeprom.h and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move common eeprom definitions in mt76x02-lib moduleLorenzo Bianconi5-160/+140
Move mt76x2 and mt76x0 common definitions in mt76x02_eeprom.h and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: add stbc entries to mt76_rate_powerFelix Fietkau4-6/+13
Add stbc tx power eeprom parsing support for mt76x2 driver. When writing power entries, make a distinction between rates that are read from the same EEPROM value, but have separate register entries. No effect on runtime behavior, but preparation for unification with mt76x0 and for placing restrictions on individual rate power limits Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move seq_put_array in mt76-core moduleLorenzo Bianconi3-21/+24
Move seq_put_array utility routine in mt76-core module in order to be reused in mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: add fw uploading routineLorenzo Bianconi5-13/+133
Add pci load firmware routine. Move some shared mcu definitions in mt76x02_mcu.h Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: add mt7650 PCI IDLorenzo Bianconi1-0/+1
Add mt7650 PCI id found on ASUS rt-51ac to pci_device_id table Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x2: fix tx power configuration for VHT mcs 9Lorenzo Bianconi1-2/+2
Fix tx power configuration for VHT 1SS/STBC mcs 9 since in MT_TX_PWR_CFG_{8,9} mcs 8,9 bits are GENMASK(21,16) and GENMASK(29,24) while GENMASK(15,6) are marked as reserved Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-09-28iwlwifi: mvm: Allow TKIP for AP modeIlan Peer1-4/+0
Support for setting keys for TKIP cipher suite was mistakenly removed for AP mode. Fix this. Fixes: 85aeb58cec1a ("iwlwifi: mvm: Enable security on new TX API") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: fix LED command capability bitJohannes Berg1-1/+1
The capability bit was added to the driver and had been negotiated with the firmware, but then got forgotten in the firmware and later reused for a different capability. Now the firmware added it in a new bit. Fixes: 2eabc84d2f8e ("iwlwifi: mvm: only send LEDS_CMD when the FW supports it") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: configure power scheme to balanced for 22560 devicesGolan Ben Ami1-4/+0
As a temporary stage in the 22560 devices bring up, we disabled power save, to avoid bugs related to that domain. Now we would like to use power save so enable the balanced mode, and allow configuring the mode via module parameter. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: add infrastructure for multiple debug buffersSara Sharon4-77/+79
In future devices we will have more than one debug buffer. Prepare the infrastructure for allocation and release of multiple debug buffers by grouping the variables in an array of structures and moving it to trans section, where they will be visible to opmode and FW. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: support transmitting SKBs with fraglistJohannes Berg1-0/+8
We want to be able to build A-MSDUs in higher layers, e.g. by xmit_more, so support transmitting SKBs with fraglist to use it for such. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: remove support for adjacent channel compensationEmmanuel Grumbach1-2/+0
We no longer want to consider the RSSI if the beacon / probe has been heard on an adjacent channel. This was based on a firmware capability that is now unavailable. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: TLC support for Coex Schema 2Erel Geron3-2/+13
The new coex schema requires setting the non-shared antenna for the single_stream_ant_msk field in the TLC command. Signed-off-by: Erel Geron <erelx.geron@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: set wep key for all stations in soft ap modeAvraham Stern3-8/+43
When operating as a soft ap with wep security, the key was not configured to the fw for the stations, based on the fact that the key will be specified in the tx command. However, in the new tx api the tx command does not include the key, which resulted in all data frames going out un-encrypted. Fix it by configuring the key for all the stations as they are added. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: use correct FIFO lengthSara Sharon2-15/+36
Current FIFO size calculation is wrong for two reasons: - We access lmac 0 by default - We don't take 11ax into consideration. Fix both. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: set RB size according to user settingsShaul Triebitz2-7/+46
RB size can be configured by user to be greater than 4K. That's needed for monitor to capture big AMSDUs. The firmware now enables different RB sizes configuration via context info. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: do not override amsdu size user settingsShaul Triebitz1-8/+12
Since AMSDUs are not de-aggregated by HW in monitor mode, we still need the option for setting large RBs (up to 12K). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: pcie: fit reclaim msg to MAX_MSG_LENGolan Ben Ami1-1/+1
Today, the length of a debug message in iwl_trans_pcie_reclaim may pass the MAX_MSG_LEN, which is 110. An example for this kind of message is: 'iwl_trans_pcie_reclaim: Read index for DMA queue txq id (2), last_to_free 65535 is out of range [0-65536] 2 2.' Cut the message a bit so it will fit the allowed MAX_MSG_LEN. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 22:23:09 +0300