summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2018-10-01qtnfmac_pcie: do not store FW name in driver state structureIgor Mitsyanko2-5/+4
Firmware name is only needed at probe stage, no point in keeping it in driver state structure. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2800: flush and txstatus rework for rt2800mmioStanislaw Gruszka4-38/+97
Implement custom rt2800mmio flush routine and change txstatus routine to read TX_STA_FIFO also in the tasklet. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2x00: use different txstatus timeouts when flushingStanislaw Gruszka3-10/+26
Use different tx status timeouts for normal operation and when flushing. This increase timeout to 2s for normal operation as when there are bad radio conditions and frames are reposted many times device can not provide the status for quite long. With new timeout we can still get valid status on such bad conditions. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2x00: do not check for txstatus timeout every time on taskletStanislaw Gruszka4-1/+12
Do not check for tx status timeout everytime we perform txstatus tasklet. Perform check once per half a second. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2800mmio: use txdone/txstatus routines from libStanislaw Gruszka2-172/+9
Use usb txdone/txstatus routines (now in rt2800libc) for mmio devices. Note this also change how we handle INT_SOURCE_CSR_TX_FIFO_STATUS interrupt. Now it is disabled since IRQ routine till end of the txstatus tasklet (the same behaviour like others interrupts). Reason to do not disable this interrupt was not to miss any tx status from 16 entries FIFO register. Now, since we check for tx status timeout, we can allow to miss some tx statuses. However this will be improved in further patch where I also implement read status FIFO register in the tasklet. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2800: move usb specific txdone/txstatus routines to rt2800libStanislaw Gruszka3-139/+145
In order to reuse usb txdone/txstatus routines for mmio, move them to common rt2800lib.c file. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rtlwifi: btcoex: Use proper enumerated types for Wi-Fi only interfaceNathan Chancellor1-3/+3
Clang warns when one enumerated type is implicitly converted to another. drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c:1327:34: warning: implicit conversion from enumeration type 'enum btc_chip_interface' to different enumeration type 'enum wifionly_chip_interface' [-Wenum-conversion] wifionly_cfg->chip_interface = BTC_INTF_PCI; ~ ^~~~~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c:1330:34: warning: implicit conversion from enumeration type 'enum btc_chip_interface' to different enumeration type 'enum wifionly_chip_interface' [-Wenum-conversion] wifionly_cfg->chip_interface = BTC_INTF_USB; ~ ^~~~~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c:1333:34: warning: implicit conversion from enumeration type 'enum btc_chip_interface' to different enumeration type 'enum wifionly_chip_interface' [-Wenum-conversion] wifionly_cfg->chip_interface = BTC_INTF_UNKNOWN; ~ ^~~~~~~~~~~~~~~~ 3 warnings generated. Use the values from the correct enumerated type, wifionly_chip_interface. BTC_INTF_UNKNOWN = WIFIONLY_INTF_UNKNOWN = 0 BTC_INTF_PCI = WIFIONLY_INTF_PCI = 1 BTC_INTF_USB = WIFIONLY_INTF_USB = 2 Link: https://github.com/ClangBuiltLinux/linux/issues/135 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath5k: Remove unused BUG_ONNathan Chancellor1-2/+0
Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/wireless/ath/ath5k/debug.c:1031:14: warning: address of array 'ah->sbands' will always evaluate to 'true' [-Wpointer-bool-conversion] BUG_ON(!ah->sbands); ~~~~~^~~~~~ ./include/asm-generic/bug.h:61:45: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~ ./include/linux/compiler.h:77:42: note: expanded from macro 'unlikely' # define unlikely(x) __builtin_expect(!!(x), 0) ^ 1 warning generated. Given that this condition is always false because of the logical not, just remove it. Link: https://github.com/ClangBuiltLinux/linux/issues/130 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rsi: Remove unnecessary boolean conditionNathan Chancellor1-1/+1
Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/net/wireless/rsi/rsi_91x_mac80211.c:927:50: warning: address of array 'key->key' will always evaluate to 'true' [-Wpointer-bool-conversion] if (vif->type == NL80211_IFTYPE_STATION && key->key && ~~ ~~~~~^~~ 1 warning generated. Link: https://github.com/ClangBuiltLinux/linux/issues/136 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ipw2x00: Remove unnecessary parenthesesNathan Chancellor1-1/+1
Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/net/wireless/intel/ipw2x00/ipw2200.c:5655:28: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((priv->ieee->iw_mode == IW_MODE_ADHOC)) { ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ drivers/net/wireless/intel/ipw2x00/ipw2200.c:5655:28: note: remove extraneous parentheses around the comparison to silence this warning if ((priv->ieee->iw_mode == IW_MODE_ADHOC)) { ~ ^ ~ drivers/net/wireless/intel/ipw2x00/ipw2200.c:5655:28: note: use '=' to turn this equality comparison into an assignment if ((priv->ieee->iw_mode == IW_MODE_ADHOC)) { ^~ = 1 warning generated. Link: https://github.com/ClangBuiltLinux/linux/issues/134 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01wil6210: remove set but not used variable 'start'YueHaibing1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/ath/wil6210/pm.c: In function 'wil_suspend_keep_radio_on': drivers/net/wireless/ath/wil6210/pm.c:193:16: warning: variable 'start' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath9k: debug: remove set but not used variable 'fops_dump_nfcal'YueHaibing1-13/+0
'fops_dump_nfcal' is not used since commit 4447d815fd0f ("ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath9k: add reset for airtime station debugfsLouie Lu1-1/+17
Let user can reset station airtime status by debugfs, it will reset all airtime deficit to ATH_AIRTIME_QUANTUM and reset rx/tx airtime accumulate to 0. Signed-off-by: Louie Lu <git@louie.lu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: disable napi before resource cleanup to avoid "use after free"Govind Singh1-1/+1
CE buffers are cleaned up prior to napi disable and this is causing NULL pointer dereference due to "use after free". Disable napi before resource cleanup to avoid "use after free". Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: move napi_enable to hif_start for consistent pairingGovind Singh1-1/+1
There is unbalanced napi_{enable,disable}() behavior as they are being called from hif_snoc_{power_up/stop). The fix is to call napi_enable() from ath10k_snoc_hif_start() so that it matches with napi_disable() being called from ath10k_snoc_hif_stop(). Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: advertize beacon_int_min_gcd as 100 while bring up multi vapsMaharaja Kennadyrajan2-0/+34
With the latest firmware design, the beacon interval should be greater than 100 to bring the multiple vaps. Set beacon_int_min_gcd to 100, when the wmi service WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT is enabled in the firmware. If not, beacon_int_min_gcd will be set to the default value 1. Tested in QCA4019 with firmware ver 10.4-3.2.1.1-00015 Tested in QCA9888 with firmware ver 10.4-3.5.1-0005 Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: add debugfs support to get power save state change of STAMaharaja Kennadyrajan6-1/+161
This patch helps to get the power save state change of each peer connected to the AP. With WMI_10_4_PEER_STA_PS_STATECHG_EVENTID event, ps state of each peer is reported to user space via debugfs. Use the below command to get the ps state of each sta: cat /sys/kernel/debug/ieee80211/phyX/netdev::wlanX/stations/ XX:XX:XX:XX:XX:XX/peer_ps_state If STA is in power save state, we get the peer_ps_state value as 1. if STA is not in power save state, we get the peer_ps_state value as 0. If ps_state event is disabled, we get the peer_ps_state value as 2. We can enable/disable the ps_state events using the debugfs flag "ps_state_enable" echo Y > /sys/kernel/debug/ieee80211/phyX/ath10k/ps_state_enable Y = 1 to enable and Y = 0 to disable Tested in QCA4019 with firmware ver 10.4-3.2.1.1-00011 Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: remove duplicated includesYueHaibing3-3/+0
remove duplicated include from ath10k driver. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: add support for configuring management packet rateSriram R1-2/+43
By default the firmware uses 1Mbps and 6Mbps rate for management packets in 2G and 5G bands respectively. But when the user selects different basic rates from the userspace, we need to send the management packets at the lowest basic rate selected by the user. This change makes use of WMI_VDEV_PARAM_MGMT_RATE param for configuring the management packets rate to the firmware. Chipsets Tested : QCA988X, QCA9887, QCA9984 FW Tested : 10.2.4-1.0-41, 10.4-3.6.104 Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: remove num_peers in hw_params for most targetsErik Stromdahl1-13/+0
>From commit "ath10k: add per target config of max_num_peers", the num_peers value in struct ath10k_hw_params is used to override the value obtained from the WMI op version in the firmware file. Currently, only high latency devices (USB and SDIO) need to use this value, since the value obtained from the WMI op version is not applicable for these devices. Many devices in ath10k_hw_params_list have the wrong value set. An example of this is the QCA9880 hw2.0 chipset that had (before this patch) num_peers set to TARGET_TLV_NUM_PEERS although the firmware uses WMI version ATH10K_FW_WMI_OP_VERSION_10_2_4. Using the wrong value for the QCA9880 chip results in a fw crash: ath10k_pci 0000:01:00.0: firmware crashed! (guid ddf39880-3e64-4edf-b4e4-979d31724503) ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 0 ath10k_pci 0000:01:00.0: firmware ver 10.2.4-1.0-00037 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 a4a52adb ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 ath10k_pci 0000:01:00.0: firmware register dump: ath10k_pci 0000:01:00.0: [00]: 0x4100016C 0x000015B3 0x009B54B7 0x00955B31 ath10k_pci 0000:01:00.0: [04]: 0x009B54B7 0x00060530 0x00000011 0x00400000 ath10k_pci 0000:01:00.0: [08]: 0x000001B8 0x00000007 0x00443138 0x00955A00 ath10k_pci 0000:01:00.0: [12]: 0x00000009 0x00000000 0x009B548E 0x009B54AB ath10k_pci 0000:01:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000 ath10k_pci 0000:01:00.0: [20]: 0x409B54B7 0x0040AC64 0x00400000 0x00000087 ath10k_pci 0000:01:00.0: [24]: 0x809A3831 0x0040ACC4 0x000001B1 0xC09B54B7 ath10k_pci 0000:01:00.0: [28]: 0x809A2F08 0x0040AD04 0x00410410 0x00000001 ath10k_pci 0000:01:00.0: [32]: 0x80988856 0x0040AD24 0x00410410 0x00000001 ath10k_pci 0000:01:00.0: [36]: 0x8098AF64 0x0040AD44 0x00410410 0x00000001 ath10k_pci 0000:01:00.0: [40]: 0x809B5DEC 0x0040AD84 0x00410410 0x00410FF4 ath10k_pci 0000:01:00.0: [44]: 0x809B1F20 0x0040ADA4 0x00400000 0x00416C54 ath10k_pci 0000:01:00.0: [48]: 0x809C0295 0x0040ADE4 0x0040AE08 0x00411DC8 ath10k_pci 0000:01:00.0: [52]: 0x809486FA 0x0040AE04 0x00000001 0x00000000 ath10k_pci 0000:01:00.0: [56]: 0x80948E2C 0x0040AEA4 0x0041F290 0x004123D4 ath10k_pci 0000:01:00.0: Copy Engine register dump: ath10k_pci 0000:01:00.0: [00]: 0x00057400 10 10 3 3 ath10k_pci 0000:01:00.0: [01]: 0x00057800 3 3 8 9 ath10k_pci 0000:01:00.0: [02]: 0x00057c00 2 2 1 2 ath10k_pci 0000:01:00.0: [03]: 0x00058000 1 1 2 1 ath10k_pci 0000:01:00.0: [04]: 0x00058400 0 0 40 0 ath10k_pci 0000:01:00.0: [05]: 0x00058800 1 1 0 1 ath10k_pci 0000:01:00.0: [06]: 0x00058c00 0 0 0 0 ath10k_pci 0000:01:00.0: [07]: 0x00059000 0 0 0 0 Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: add default value for num_peers in WMI TLV initErik Stromdahl1-1/+4
The hw_params value will only be used if it was explicitly set in the global hw_params array. This makes it possible to have the num_peers member unset. Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: utilize random MAC address if none is providedBrian Norris1-0/+4
Since commit 9d5804662ce1 ("ath10k: retrieve MAC address from system firmware if provided"), we support pulling our MAC address from system firmware. Along with this, we should admit that it's possible for system firmware to be screwed up as well, omitting the MAC address there. Provide a fallback, such that we choose a randomly-generated MAC address, with the local assignment bit set. This is not a preferred mode of operation and really should only serve the purpose of keeping the system chugging along while someone figures out what's wrong with the system. Grepping through other wireless drivers shows very similar fallback logic though, so why not? git grep eth_random_addr drivers/net/wireless/ Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: fix tx status flag setting for management framesRakesh Pillai1-1/+6
The tx_status for management frames is being filled incorrectly in the flags of skb_cb. This incorrect flag setting causes the upper layers to consider that the particular frame was not transmitted properly, leading to improper behavior. Set the IEEE80211_TX_STAT_ACK flag in the info flags of skb_cb, to indicate the successful transmission of the management frame. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Fixes: dc405152bb64d4ae01c9ac669de25b2d1fb6fc2d Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: fix vdev-start timeout on errorBen Greear4-5/+25
The vdev-start-response message should cause the completion to fire, even in the error case. Otherwise, the user still gets no useful information and everything is blocked until the timeout period. Add some warning text to print out the invalid status code to aid debugging, and propagate failure code. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01mt76: mt76x2: fix multi-interface beacon configurationFelix Fietkau1-2/+1
If the first virtual interface is a station (or an AP with beacons temporarily disabled), the beacon of the second interface needs to occupy hardware beacon slot 0. For some reason the beacon index was incorrectly masked with the virtual interface beacon mask, which prevents the secondary interface from sending beacons unless the first one also does. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: check aggregation sequence number for frames sent via drv_txFelix Fietkau1-11/+25
ps-poll response frames can be sent via drv_tx. Store the frame sequence number for such frames, in case a BlockAckReq needs to be sent Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: fix handling ps-poll framesFelix Fietkau1-0/+6
Hardware station lookup for pspoll frames can fail, which makes the driver ignore ps-poll frames. Fix the resulting powersave issues by looking up the station for pspoll frames in software Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: usb: move mt76x0u_tx_prepare_skb in usb.cLorenzo Bianconi3-24/+24
Move mt76x0u_tx_prepare_skb routine in usb module in order to remove leftover usb dependency from generic code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: eeprom: load eeprom data from mtd by defaultLorenzo Bianconi1-13/+43
Read eeprom data from mtd memory by default and fall-back to efuse if it fails Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: add mt76x0e_{start/stop} callbacksLorenzo Bianconi1-0/+34
Introduce mt76x0e_start and mt76x0e_stop mac80211 callbacks to start/stop device mac opening/closing the netdevice Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: add ieee80211_ops ops pointer to mt76x0_alloc_device signatureLorenzo Bianconi6-103/+135
Add ieee80211_ops ops pointer to mt76x0_alloc_device routine signature in order to specify mac80211 callbacks and remove usb dependency from mt76x0 generic code. Move mt76x0_ops callbacks in usb module in order to remove leftover usb dependency in mt76x0 generic code. Introduce mt76x0e_ops mac80211 callbacks for pci code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move set_{tx,rx}_path routines in mt76x02-lib moduleLorenzo Bianconi13-73/+50
Move mt76x02_phy_set_rxpath and mt76x02_phy_tx_dac routines in mt76x02_phy.c since they are shared between mt76x2 and mt76x0 drivers. Moreover move chainmask variable from mt76x2/mt76x0 to mt76_dev data structure Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: phy: set antenna parameter according to wireless bandLorenzo Bianconi1-11/+20
Move mt76x0_ant_select routine in __mt76x0_phy_set_channel in order to configure antenna parameters according to the current wireless channel Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: add hw initialization at bootstrapLorenzo Bianconi3-8/+50
Add mt76x0e_register_device routine in pci.c to initialize the device during hw probe. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: usb: move initialization code in usb.cLorenzo Bianconi3-79/+91
Move usb initialization code in mt76x0-usb module in order to remove usb dependency from generic init code (not completed yet). Moreover fix a memory leak in usb probe if mt76x02_wait_for_mac fails Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: add mt76x02_mac_start routineLorenzo Bianconi3-11/+15
Introduce mt76x02_mac_start since the mac start code is shared between mt76x0e and mt76x2 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: init rx filter in mt76x0_init_hardwareLorenzo Bianconi2-8/+11
Initialize rxfilter mask at bootstrap an not at mac start. This is a preliminary patch to share mt76x2_mac_start routine between mt76x2e and mt76x0e drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: init: remove MT_PBF_SYS_CTRL configuration in mt76x0_reset_csr_bbpLorenzo Bianconi1-9/+3
Remove MT_PBF_SYS_CTRL configuration in mt76x0_reset_csr_bbp since it is already initialized in mt76x0_init_mac_registers routine Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: init: remove duplicated initializationLorenzo Bianconi1-3/+0
Remove MT_HEADER_TRANS_CTRL_REG/MT_TSO_CTRL configuration since they are already initialized in mt76x0_init_mac_registers routine Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: use mt76x02 utility routines in mt76x0 init codeLorenzo Bianconi1-13/+6
Use mt76x02_wait_for_wpdma and mt76x02_wait_for_txrx_idle utility routines in mt76x0_init_hardware and mt76x0_mac_start and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: usb: move mcu code in usb_mcu.cLorenzo Bianconi4-158/+178
Move usb mcu code in a dedicated source file in order to remove usb dependency from generic source files and improve code maintainability Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: pci: move mcu code in pci_mcu.cLorenzo Bianconi4-113/+149
Move pci mcu code in a dedicated source file in order to improve maintainability and facilitate new device support development Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76x0: update initvals to latest version of vendor driverLorenzo Bianconi1-227/+178
Update mac/rf/dcoc initial values to latest version of vendor driver. Improve code readability Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x2_wait_for_bbp in mt76x02-lib moduleLorenzo Bianconi3-8/+9
Move mt76x2_wait_for_bbp utility routine in mt76x02_util.h in order to be resued by mt76x0 driver. Morover rename it in mt76x02_wait_for_txrx_idle Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: mmio: add implementation of wr_rp and rd_rpLorenzo Bianconi2-13/+28
Introduce mmio implementation of mt76_mmio_rd_rp and mt76_mmio_wr_rp and remove mt76x2 duplicated code. mt76_mmio_{wr,rd}_rp allows to reuse mt76x0 init code adding mt76x0e support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x02_beacon_offset in mt76x02_util.cLorenzo Bianconi8-83/+45
Move mt76x02_beacon_offset utility routine in mt76x02-lib module since it is shared between mt76x0 and mt76x2 driver and remove duplicated code. Moreover move beacon_offset data structure in mt76x02-lib module since it is shared between mt76x0 and mt76x2 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move queue initialization in mt76x02_mmio.cLorenzo Bianconi6-95/+96
Move mt76x02_dma_init, mt76x02_init_rx_queue and mt76x02_init_tx_queue routines in mt76x02-lib module in order to be reused by mt76x0 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move mt76x02_set_irq_mask in mt76x02_mmio.cLorenzo Bianconi10-48/+51
Move mt76x02_set_irq_mask, mt76x02_irq_enable and mt76x02_irq_disable in mt76x02-lib module in order to be reused by mt76x0 driver. Moreover move irq_lock and irqmask in mt76_mmio data structure Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: add mt76x02_dma_enable/mt76x02_dma_disable utility routinesLorenzo Bianconi4-19/+57
Introduce mt76x02_dma_enable and mt76x02_dma_disable utility routines in order to be reused in mt76x0 mac configuration and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-01mt76: move wait_for_wpdma in mt76x02_dma.hLorenzo Bianconi4-10/+13
Move wait_for_wpdma utility routine in mt76x02_dma.h in order to be reused by mt76x0 driver. Moreover add the possibility to specify the timeout value in wait_for_wpdma signature Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 19:21:47 +0300