summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2014-11-17ath9k: Cancel pending offchannel operationsSujith Manoharan1-13/+30
This patch makes sure that pending roc/scan operations are cancelled properly when a new context is assigned/unassigned. The flush_work() call to flush out any scheduled channel context work is removed, instead, sc->mutex is dropped to allow any pending work to get a chance to complete by the channel scheduler. Also, increase the timeout to allow a switch to an active GO. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: Clear offchannel state properlySujith Manoharan1-0/+5
When a pending roc or scan operation is cancelled, the offchannel operation is cleared, but the offchannel state in the main scheduler is not cleared. This causes problems since an active GO will try to process a stale offchannel request that was deferred earlier. Fix this by clearing the state when there is no pending offchannel (roc/scan) operation. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: Fix thermometer programmingSujith Manoharan1-4/+5
The registers that control the on-chip thermometer need to be programmed based on the chainmask that the solution supports, not the chainmask that is present in the eeprom. Cc: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: Store the chip chainmask in HW capabilitiesSujith Manoharan2-10/+11
Cc: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: Enable TSF2 for generic HW timersSujith Manoharan3-1/+27
The base TSF is used for HW timers 0..7, but chips in the AR9003 family and above can support more generic timers. To use them, however, a second HW TSF needs to be enabled. This patch allows usage of the extra timers by starting the second TSF properly. The extra set of HW timers is apparently also present in AR9287, but we enable it only for the AR9003 family. Cc: Kobi Cohen-Arazi <kobic@qti.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: Fix LED configurationSujith Manoharan6-5/+19
On some x86 platforms, the LED gpio is active high instead of active low. Identify such cards and modify the GPIO usage to make sure LED works properly. Cc: Russell Hu <rhu@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: Use new QCA953x initvalsMiaoqing Pan1-10/+41
This patch updates the initvals for QCA953x v1.1 and v2.0 Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: Update QCA953x initvalsSujith Manoharan1-30/+468
* Duplicates have been marked. * New initvals for 1.1 and 2.0 versions. * xPA support. * Fix for low power issue. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k_htc: Enable software crypto for mgmt frame in Tx for USB devicesChun-Yeow Yeoh1-1/+4
In secured mesh, the unicast mgmt frame is encrypted using the same key that used for encrypting the unicast data frame. This patch "ath9k_htc_firmware: fix the offset of CCMP header for mesh data frame" applied to open-ath9k-htc-firmware allows the ath9k_htc to be loaded without "nohwcrypt=1". Unfortunately, this is not working and we still need CCMP encryption of transmitted management frames to be done in software. So this patch allows the software encryption for transmitted management frame to be done in software but remain the hardware decryption for received management frame. This patch is tested with the following hardwares: - TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] - AR9271 802.11n and managed to work with peer mesh STA equipped with ath9k. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k|ath9k_htc: Seperate the software crypto flag for Tx and RxChun-Yeow Yeoh5-7/+11
Use the sw_mgmt_crypto_tx flag to trigger the CCMP encryption for transmitted management frames to be done in software while the sw_mgmt_crypto_rx flag is used to trigger the CCMP decryption for received management frames to be done in software. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17mwifiex: enable auto TDLS support for SD8887Avinash Patil3-1/+9
Auto TDLS support is enabled per device. As of now add this feature only for SD8887. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17mwifiex: support for parsing TDLS discovery framesAvinash Patil1-0/+38
This patch adds support for parsing TDLS discovery frames. After parsing, we update peer RSSI information. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17mwifiex: add auto TDLS supportAvinash Patil8-2/+295
This patch adds auto TDLS support to mwifiex. Auto TDLS functionality works as follows: 1. Whenever userspace application has triggered TDLS connection with any peer, driver would store this peer mac address details in its database. 2. After this driver whenever driver receives packet on direct link, it would store rssi and timestamp in peer information. 3. Whenever a packet is to be transmitted to non-AP peer in station mode, driver would check if TDLS link can be established by looking at peer RSSI information. Driver would initiate TDLS setup in such cases. 4. Periodic timer is used for updating peer information. 5. Auto TDLS peer list & timer are cleared during disconnection or driver unload. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17mwifiex: wmm support for TDLS linkAvinash Patil1-0/+55
This patch adds WMM support for TDLS link. Patch add WMM info IE for TDLS setup request/response frames while WMM parameter for TDLS confirm frame. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17mwifiex: do not explicitly disable TDLS link during teardownAvinash Patil1-3/+0
When Teardown event from FW is indicated to userspace, userspace would trigger tdls_oper handler to disable TDLS link. We need not do this explicitly here. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17mwifiex: update rx packet descriptor structure to match FWAvinash Patil1-0/+1
RX packet descriptor structure has recently changed in FW. This patch updates rxpd accordingly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: fix the assignment of hw queues for mesh interfaceChun-Yeow Yeoh1-1/+2
We need to assign the hw queues for mesh interface. Otherwise, we are not able to bring up the mesh interface due to the IEEE80211_INVAL_HW_QUEUE error. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: common-spectral: don't depend from ATH9K_DEBUGFSOleksij Rempel1-10/+0
we can have here two variants. Add ATH9K_CMN_DEBUGFS y if ATH9K_CMN_DEBUGFS || ATH9K_HTC_DEBUGFS wich will add more configurations and testcases. Or remove ATH9K_HTC_DEBUGFS which need more time to be done. So, make common-spectral ignore ATH9K_DEBUGFS option for now. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k_htc: ath9k_htc_op_ps_wakeup() can be statickbuild test robot1-3/+3
drivers/net/wireless/ath/ath9k/htc_drv_init.c:56:6: sparse: symbol 'ath9k_htc_op_ps_wakeup' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/htc_drv_init.c:61:6: sparse: symbol 'ath9k_htc_op_ps_restore' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/htc_drv_init.c:66:19: sparse: symbol 'ath9k_htc_ps_ops' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: ath9k_op_ps_wakeup() can be statickbuild test robot1-3/+3
drivers/net/wireless/ath/ath9k/init.c:91:6: sparse: symbol 'ath9k_op_ps_wakeup' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/init.c:96:6: sparse: symbol 'ath9k_op_ps_restore' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/init.c:101:19: sparse: symbol 'ath9k_ps_ops' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17mwifiex: module load parameter for interface creationAvinash Patil2-0/+37
This patch adds module load parameter driver_mode for mwifiex which would enable driver to create AP or P2P client interface while loading module. driver_mode is bitmap of interface modes for station, AP and P2P client. Station interface is created by default and is unaffected by driver_mode parameter. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: fix misc debugfs when not using chan contextBen Greear1-3/+4
When channel-context is not enabled, all vifs belong to the first context, but it is not configured as 'assigned'. Fix misc debugfs file to print out info for non-assigned contexts, and also print whether ctx is assigned or not. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17Merge branch 'for-linville' of git://github.com/kvalo/athJohn W. Linville13-295/+388
Kalle Valo <kvalo@qca.qualcomm.com> says: "One ath6kl patch and rest for ath10k, but nothing really major which stands out. Most notable: o fix resume (Bartosz) o firmware restart is now faster and more reliable (Michal) o it's now possible to test hardware restart functionality without crashing the firmware using hw-restart parameter with simulate_fw_crash debugfs file (Michal)" Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath10k: fix mismatched wmi api callPeter Oh1-2/+2
Fix to use v10.2 wmi call for firmware v10.2. It turned out that peer association function was using v10.1 wmi call for v10.2 firmware during code review. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-17ath10k: advertise support for AP mode channel width changesRajkumar Manoharan1-0/+2
This will enable AP mode to change channel width dynamically based on 20/40 intolerance report sent by associated client. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-17ath10k: add modpram 'skip_otp' to ignore empty otp error during BMIRajkumar Manoharan1-1/+6
This patch would help bring up wifi interface with default board data in case of failures in otp download. It is useful for initial calibration. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-17ath10k: handle ieee80211 header and payload tracing separatelyRajkumar Manoharan4-16/+78
For packet log, the transmitted frame 802.11 header alone is sufficient. Recording entire packet is also consuming lot of disk space. To optimize this, tx and rx data tracepoints are splitted into header and payload tracepoints. To record tx ieee80211 headers trace-cmd record -e ath10k_tx_hdr To record complete packets trace-cmd record -e ath10k_tx_hdr -e ath10k_tx_payload Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-12ath9k_htc: remove return of value in empty definintion of ath9k_htc_deinit_debugJohn W. Linville1-1/+3
Cc: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12mwifiex: simplify ad hoc join capability infoJames Cameron1-3/+1
While preparing an ad-hoc start command, the capability info bitmap is needlessly set from the command, and then the ESS bit cleared. Change to set the bitmap directly without reference to the command. Signed-off-by: James Cameron <quozl@laptop.org> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12wlcore: make wlcore_cmd_send_failsafe() staticLuciano Coelho2-5/+4
The wlcore_cmd_send_failsafe() function is only called in the cmd.c file, where it is definde. Make it static. Additionally, move the EXPORT_SYMBOL macro for wl1271_cmd_send() to the right place. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12wlcore: check minimum buffer size in some cmd_send functionsLuciano Coelho1-0/+6
Check for the minimum required buffer length in wlcore_cmd_send() and wlcore_cmd_configure_failsafe. This ensures that we will never try to use a buffer that is smaller than the required header. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12mwifiex: fix version display problem on big endian platformsAmitkumar Karwar1-2/+2
It's been observed that wrong firmware version (ex. 66.14.96.p9 instead of 14.66.9.p96) is displayed on big endian platforms. The problem is fixed here. Reported-by: Daniel Mosquera <daniel.mosquera@ctag.com> Tested-by: Daniel Mosquera <daniel.mosquera@ctag.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k_htc: add spectral scan debug interfaceOleksij Rempel3-0/+9
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k_htc: process rx spectral packetsOleksij Rempel1-0/+14
use code provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k_htc: trigger spectral scan on set_channelOleksij Rempel1-0/+4
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k_htc: set initial spec_config valuesOleksij Rempel1-0/+8
use values provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k_htc: add struct ath_spec_scan_priv to ath9k_htc_privOleksij Rempel1-0/+1
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k_htc: add ath_ps_ops bindingsOleksij Rempel1-0/+16
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k_htc: fix rs_datalen conversationOleksij Rempel1-1/+1
For some reason it didn't coused obvious problems. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k: For AR9271 chipsets, set count = 0 for endless samples.Oleksij Rempel1-3/+6
not sure why. Initially provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k: move spectral.* to common-spectral.*Oleksij Rempel8-25/+31
and rename exports from ath9k_spectral_* to ath9k_cmn_spectral_* Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k: move ath9k_spectral_scan_ from main.c to spectral.cOleksij Rempel2-70/+70
Now we should be ready to make this code common. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k: make ath9k_spectral_scan_ do not depend on ath_softcOleksij Rempel4-20/+22
last preparation before moving ath9k_spectral_scan_ to spectral.c Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k: use ath_common instead of ieee80211_hw in ath9k_spectral_scan_Oleksij Rempel4-15/+13
we don't have here any ieee80211_hw dependencies any way. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k: use ath_ps_ops in ath9k_spectral_scan_Oleksij Rempel1-4/+4
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k: add ath_ps_ops bindingsOleksij Rempel1-0/+16
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath: add struct ath_ps_opsOleksij Rempel1-0/+11
we will need it to make common code Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k: remove all struct ath_softc dependencies from spectral codeOleksij Rempel4-50/+51
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k: add ath_hw to ath_spec_scan_privOleksij Rempel2-0/+2
spectral code mostly depends on ath_hw, not on ath_softc Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-12ath9k: use struct dentry by ath9k_spectral_init_debugOleksij Rempel3-9/+9
this will alow us to make ath_softc independent code. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-28 23:17:31 +0300