summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2016-10-22brcmfmac: use correct skb freeing helper when deleting flowringRafał Miłecki1-1/+8
commit 7f00ee2bbc630900ba16fc2690473f3e2db0e264 upstream. Flowrings contain skbs waiting for transmission that were passed to us by netif. It means we checked every one of them looking for 802.1x Ethernet type. When deleting flowring we have to use freeing function that will check for 802.1x type as well. Freeing skbs without a proper check was leading to counter not being properly decreased. This was triggering a WARNING every time brcmf_netdev_wait_pend8021x was called. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-22brcmfmac: fix memory leak in brcmf_fill_bss_paramRafał Miłecki1-1/+4
commit 23e9c128adb2038c27a424a5f91136e7fa3e0dc6 upstream. This function is called from get_station callback which means that every time user space was getting/dumping station(s) we were leaking 2 KiB. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 1f0dc59a6de ("brcmfmac: rework .get_station() callback") Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-22brcmfmac: fix pmksa->bssid usageNicolas Iooss1-2/+2
commit 7703773ef1d85b40433902a8da20167331597e4a upstream. The struct cfg80211_pmksa defines its bssid field as: const u8 *bssid; contrary to struct brcmf_pmksa, which uses: u8 bssid[ETH_ALEN]; Therefore in brcmf_cfg80211_del_pmksa(), &pmksa->bssid takes the address of this field (of type u8**), not the one of its content (which would be u8*). Remove the & operator to make brcmf_dbg("%pM") and memcmp() behave as expected. This bug have been found using a custom static checker (which checks the usage of %p... attributes at build time). It has been introduced in commit 6c404f34f2bd ("brcmfmac: Cleanup pmksa cache handling code"), which replaced pmksa->bssid by &pmksa->bssid while refactoring the code, without modifying struct cfg80211_pmksa definition. Replace &pmk[i].bssid with pmk[i].bssid too to make the code clearer, this change does not affect the semantic. Fixes: 6c404f34f2bd ("brcmfmac: Cleanup pmksa cache handling code") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-22carl9170: fix debugfs crashesChristian Lamparter1-2/+4
commit 6ee6d1cb391ca85b419f8d18bdfb1f020a5e859c upstream. Ben Greear reported: > I see lots of instability as soon as I load up the carl9710 NIC. > My application is going to be poking at it's debugfs files... > > BUG: KASAN: slab-out-of-bounds in carl9170_debugfs_read+0xd5/0x2a0 > [carl9170] at addr 0xffff8801bc1208b0 > Read of size 8 by task btserver/5888 > ======================================================================= > BUG kmalloc-256 (Tainted: G W ): kasan: bad access detected > ----------------------------------------------------------------------- > > INFO: Allocated in seq_open+0x50/0x100 age=2690 cpu=2 pid=772 >... This breakage was caused by the introduction of intermediate fops in debugfs by commit 9fd4dcece43a ("debugfs: prevent access to possibly dead file_operations at file open") Thankfully, the original/real fops are still available in d_fsdata. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-22b43legacy: fix debugfs crashChristian Lamparter1-2/+4
commit 9c4a45b17e094a090e96beb1138e34c2a10c6b8c upstream. This patch fixes a crash that happens because b43legacy's debugfs code expects file->f_op to be a pointer to its own b43legacy_debugfs_fops struct. This is no longer the case since commit 9fd4dcece43a ("debugfs: prevent access to possibly dead file_operations at file open") Reviewed-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-22b43: fix debugfs crashChristian Lamparter1-2/+4
commit 51b275a6fe5601834b717351d6cbdb89bd1f308b upstream. This patch fixes a crash that happens because b43's debugfs code expects file->f_op to be a pointer to its own b43_debugfs_fops struct. This is no longer the case since commit 9fd4dcece43a ("debugfs: prevent access to possibly dead file_operations at file open") Reviewed-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07ath10k: fix get rx_status from htt contextAshok Raj Nagarajan1-5/+5
commit 237e15dfd5d651868726111c3a9d828bec700490 upstream. On handling amsdu on rx path, get the rx_status from htt context. Without this fix, we are seeing warnings when running DBDC traffic like this. WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4105 ieee80211_rx_napi+0x88/0x7d8 [mac80211]() [ 1715.878248] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.18.21 #1 [ 1715.878273] [<c001d3f4>] (unwind_backtrace) from [<c001a4b0>] (show_stack+0x10/0x14) [ 1715.878293] [<c001a4b0>] (show_stack) from [<c01bee64>] (dump_stack+0x70/0xbc) [ 1715.878315] [<c01bee64>] (dump_stack) from [<c002a61c>] (warn_slowpath_common+0x64/0x88) [ 1715.878339] [<c002a61c>] (warn_slowpath_common) from [<c002a6d0>] (warn_slowpath_null+0x18/0x20) [ 1715.878395] [<c002a6d0>] (warn_slowpath_null) from [<bf4caa98>] (ieee80211_rx_napi+0x88/0x7d8 [mac80211]) [ 1715.878474] [<bf4caa98>] (ieee80211_rx_napi [mac80211]) from [<bf568658>] (ath10k_htt_t2h_msg_handler+0xb48/0xbfc [ath10k_core]) [ 1715.878535] [<bf568658>] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [<bf568708>] (ath10k_htt_t2h_msg_handler+0xbf8/0xbfc [ath10k_core]) [ 1715.878597] [<bf568708>] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [<bf569160>] (ath10k_htt_txrx_compl_task+0xa54/0x1170 [ath10k_core]) [ 1715.878639] [<bf569160>] (ath10k_htt_txrx_compl_task [ath10k_core]) from [<c002db14>] (tasklet_action+0xb4/0x130) [ 1715.878659] [<c002db14>] (tasklet_action) from [<c002d110>] (__do_softirq+0xe0/0x210) [ 1715.878678] [<c002d110>] (__do_softirq) from [<c002d4b4>] (irq_exit+0x84/0xe0) [ 1715.878700] [<c002d4b4>] (irq_exit) from [<c005a544>] (__handle_domain_irq+0x98/0xd0) [ 1715.878722] [<c005a544>] (__handle_domain_irq) from [<c00085f4>] (gic_handle_irq+0x38/0x5c) [ 1715.878741] [<c00085f4>] (gic_handle_irq) from [<c0009680>] (__irq_svc+0x40/0x74) [ 1715.878753] Exception stack(0xc05f9f50 to 0xc05f9f98) [ 1715.878767] 9f40: ffffffed 00000000 00399e1e c000a220 [ 1715.878786] 9f60: 00000000 c05f6780 c05f8000 00000000 c05f5db8 ffffffed c05f8000 c04d1980 [ 1715.878802] 9f80: 00000000 c05f9f98 c0018110 c0018114 60000013 ffffffff [ 1715.878822] [<c0009680>] (__irq_svc) from [<c0018114>] (arch_cpu_idle+0x2c/0x50) [ 1715.878844] [<c0018114>] (arch_cpu_idle) from [<c00530d4>] (cpu_startup_entry+0x108/0x234) [ 1715.878866] [<c00530d4>] (cpu_startup_entry) from [<c05c7be0>] (start_kernel+0x33c/0x3b8) [ 1715.878879] ---[ end trace 6d5e1cc0fef8ed6a ]--- [ 1715.878899] ------------[ cut here ]------------ Fixes: 18235664e7f9 ("ath10k: cleanup amsdu processing for rx indication") Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07brcmsmac: Initialize power in brcms_c_stf_ss_algo_channel_get()Florian Fainelli1-1/+1
commit f823a2aa8f4674c095a5413b9e3ba12d82df06f2 upstream. wlc_phy_txpower_get_current() does a logical OR of power->flags, which presumes that power.flags was initiliazed earlier by the caller, unfortunately, this is not the case, so make sure we zero out the struct tx_power before calling into wlc_phy_txpower_get_current(). Reported-by: coverity (CID 146011) Fixes: 5b435de0d7868 ("net: wireless: add brcm80211 drivers") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07brcmsmac: Free packet if dma_mapping_error() fails in dma_rxfillFlorian Fainelli1-1/+3
commit 5c5fa1f464ac954982df1d96b9f9a5103d21aedd upstream. In case dma_mapping_error() returns an error in dma_rxfill, we would be leaking a packet that we allocated with brcmu_pkt_buf_get_skb(). Reported-by: coverity (CID 1081819) Fixes: 67d0cf50bd32 ("brcmsmac: Fix WARNING caused by lack of calls to dma_mapping_error()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chainFlorian Fainelli1-1/+3
commit 3bdae810721b33061d2e541bd78a70f86ca42af3 upstream. In case brcmf_sdiod_recv_chain() cannot complete a succeful call to brcmf_sdiod_buffrw, we would be leaking glom_skb and not free it as we should, fix this. Reported-by: coverity (CID 1164856) Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07ath9k: Fix programming of minCCA power thresholdSven Eckelmann1-1/+1
commit aaab50fcea78ae3414c3afc25aae8d0603df34d0 upstream. The function ar9003_hw_apply_minccapwr_thresh takes as second parameter not a pointer to the channel but a boolean value describing whether the channel is 2.4GHz or not. This broke (according to the origin commit) the ETSI regulatory compliance on 5GHz channels. Fixes: 3533bf6b15a0 ("ath9k: Fix regulatory compliance") Signed-off-by: Sven Eckelmann <sven@narfation.org> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlmvm: mvm: set correct state in smart-fifo configurationstriebit1-1/+1
commit 849a9627299100ae3f0ce573fc87d2b476f3bb59 upstream. Currently the state sent in SF configuration is always FULL_ON. This commit sets the correct state (e.g. INIT_OFF when station is not associated). Fixes: commit f4a3ee493e69 ("iwlwifi: mvm: Always enable the smart FIFO") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlwifi: mvm: don't use ret when not initialisedEmmanuel Grumbach1-1/+2
commit ff6e58e648ed5f3cc43891767811d5c3c88bbd41 upstream. fw-dbg code return ret but that variable was either 0 or not initialised. Return 0 always. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 6a95126763fb ("iwlwifi: mvm: send dbg config hcmds to fw if set in tlv") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlwifi: mvm: avoid harmless -Wmaybe-uninialized warningArnd Bergmann1-20/+21
commit 5a7d87da8d9b9f04ecdbebe7e5710a1391f85fa8 upstream. gcc is apparently unablel to track the state of the local 'resp_v2' variable across the kzalloc() function, and warns about the response variable being used without an initialization: drivers/net/wireless/intel/iwlwifi/mvm/nvm.c: In function ‘iwl_mvm_update_mcc’: drivers/net/wireless/intel/iwlwifi/mvm/nvm.c:727:36: warning: ‘mcc_resp_v1’ may be used uninitialized in this function [-Wmaybe-uninitialized] resp_cp->n_channels = mcc_resp_v1->n_channels; drivers/net/wireless/intel/iwlwifi/mvm/nvm.c:721:3: warning: ‘mcc_resp’ may be used uninitialized in this function [-Wmaybe-uninitialized] memcpy(resp_cp, mcc_resp, resp_len); The warning showed up in x86 allmodconfig after my patch to unhide -Wmaybe-uninitialized warnings by default was merged, though it always existed in randconfig builds. I did not catch the warning earlier because I was testing on ARM, which never produced the warning. This rearranges the code in a way that improves readability for both humans and the compiler, and that avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 6fa52430f0b3 ("iwlwifi: mvm: change mcc update API") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlwifi: mvm: free RX reorder buffer on restartSara Sharon1-3/+4
commit 60dec5233cd8651860e8010c953d116fb0f1ba86 upstream. Restart flow zeroes the rx_ba_sessions counter. Mac80211 asks driver to tear down of the session only afterwards, and as a result driver didn't free the data. Fix it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 10b2b2019d81 ("iwlwifi: mvm: add infrastructure for tracking BA session in driver") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlwifi: pcie: fix access to scratch bufferSara Sharon1-2/+2
commit d5d0689aefc59c6a5352ca25d7e6d47d03f543ce upstream. This fixes a pretty ancient bug that hasn't manifested itself until now. The scratchbuf for command queue is allocated only for 32 slots but is accessed with the queue write pointer - which can be up to 256. Since the scratch buf size was 16 and there are up to 256 TFDs we never passed a page boundary when accessing the scratch buffer, but when attempting to increase the size of the scratch buffer a panic was quick to follow when trying to access the address resulted in a page boundary. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 38c0f334b359 ("iwlwifi: use coherent DMA memory for command header") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlwifi: mvm: unmap the paging memory before freeing itEmmanuel Grumbach1-4/+8
commit 3edbc7dabab8ce85aa75c5e290ecda7a3692ebc9 upstream. This led to a DMA splat. Fixes: a6c4fb4441f4 ("iwlwifi: mvm: Add FW paging mechanism for the UMAC on PCI") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlwifi: mvm: write the correct internal TXF indexGolan Ben-Ami1-1/+2
commit e7c9bd1cc632e924a69bf704385484386bb10933 upstream. The TX fifos are arranged consecutively in the SMEM, beginning with the regular fifos, and tailed by the internal fifos. In the current code, while trying to read the internal fifos, we read the fifos beginning with the index zero. By doing this we actually re-read the regular fifos. In order to read the internal fifos, start the reading index from the number of regular fifos configured by the fw. Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Fixes: 39654cb3a6a2 ("iwlwifi: don't access a nonexistent register upon assert") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlwifi: mvm: fix txq aggregation bugOren Givon1-1/+9
commit 2c4a247e42526d9aae8f5ce1f190b893532f2806 upstream. Fix an issue where nullfunc frames and block ack requests had the same tid as aggregation frames and were queued on a non aggregation queue. The pending frames counter included those frames but the check whether to decrement the pending frames counter relied on the tid status and not on the txq id. The result was an inconsistent state of the pending frames counter followed by a failure to remove the station. This failure triggered SYSASSERT 0x3421. In addition, fix a situation in DQA mode where the number of pending frames turned negative. This was due to the TX queue being on the IWL_EMPTYING_HW_QUEUE_DELBA state and its frames were still decremented. Even though the SYSASSERT issue is fixed when DQA is disabled, the issue is not completely solved when DQA is enabled and should still be fixed. Signed-off-by: Oren Givon <oren.givon@intel.com> Fixes: cf961e16620f ("iwlwifi: mvm: support dqa-mode agg on non-shared queue") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07iwlwifi: mvm: checksum IPv6 fragmented packetSara Sharon1-15/+6
commit ecf51424152bad1b2727409f42ddf1bd86f44b7d upstream. Our HW does not support checksum of fragmented packets. Fix code accordingly to checksum those packets in the driver. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 5e6a98dc4863 ("iwlwifi: mvm: enable TCP/UDP checksum support for 9000 family") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07mwifiex: illegal assignmentHeinrich Schuchardt1-1/+1
commit 3fdbda446fbcd7fb750179c01338e81cf04e46c7 upstream. Variable adapter is incorrectly initialized. Fixes: bf00dc22bc7a ("mwifiex: AMSDU Rx frame handling in AP mode") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30iwlwifi: mvm: update TX queue before making a copy of the skbBeni Lev1-10/+9
commit 54c5ef2e93ea002dc5dd63349298b2778fe59edb upstream. Off-channel action frames (such as ANQP frames) must be sent either on the AUX queue or on the offchannel queue, otherwise the firmware will cause a SYSASSERT. In the current implementation, the queue to be used is correctly set in the original skb, but this is done after it is copied. Thus the copy remains with the original, incorrect queue. Fix this by setting the queue in the original skb before copying it. Fixes: commit 5c08b0f5026f ("iwlwifi: mvm: don't override the rate with the AMSDU len") Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24iwlegacy: avoid warning about missing bracesArnd Bergmann1-1/+2
commit 2cce76c3fab410520610a7d2f52faebc3cfcf843 upstream. gcc-6 warns about code in il3945_hw_txq_ctx_free() being somewhat ambiguous: drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] This adds a set of curly braces to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24ath9k: bring back direction setting in ath9k_{start_stop}Giedrius Statkevičius1-2/+7
commit e34f2ff40e0339f6a379e1ecf49e8f2759056453 upstream. A regression was introduced in commit id 79d4db1214a ("ath9k: cleanup led_pin initial") that broken the WLAN status led on my laptop with AR9287 after suspending and resuming. Steps to reproduce: * Suspend (laptop) * Resume (laptop) * Observe that the WLAN led no longer turns ON/OFF depending on the status and is always red Even though for my case it only needs to be set to OUT in ath9k_start but for consistency bring back the IN direction setting as well. Fixes: 79d4db1214a0 ("ath9k: cleanup led_pin initial") Cc: Miaoqing Pan <miaoqing@codeaurora.org> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=151711 Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com> [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24ath9k: fix using sta->drv_priv before initializing itFelix Fietkau1-4/+4
commit 7711aaf08ad3fc4d0e937eec1de0a63620444ce7 upstream. A station pointer can be passed to the driver on tx, before it has been marked as associated. Since ath9k_sta_state was initializing the entry too late, it resulted in some spurious crashes. Fixes: df3c6eb34da5 ("ath9k: Use sta_state() callback") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24brcmfmac: avoid potential stack overflow in brcmf_cfg80211_start_ap()Arend Van Spriel1-1/+1
commit ded89912156b1a47d940a0c954c43afbabd0c42c upstream. User-space can choose to omit NL80211_ATTR_SSID and only provide raw IE TLV data. When doing so it can provide SSID IE with length exceeding the allowed size. The driver further processes this IE copying it into a local variable without checking the length. Hence stack can be corrupted and used as exploit. Reported-by: Daxing Guo <freener.gdx@gmail.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20brcmfmac: restore stopping netdev queue when bus clogs upArend Van Spriel1-5/+17
commit 82bc9ab6a8f577d2174a736c33f3d4ecf7d9ef47 upstream. When the host-interface bus has hard time handling transmit packets it informs higher layer about this and it would stop the netdev queue when needed. However, since commit 9cd18359d31e ("brcmfmac: Make FWS queueing configurable.") this was broken. With this patch the behaviour is restored. Fixes: 9cd18359d31e ("brcmfmac: Make FWS queueing configurable.") Tested-by: Per Förlin <per.forlin@gmail.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20iwlwifi: add new 8265Oren Givon1-0/+6
commit f24bbae565d279cd90c904fe55b539a45631705e upstream. Add 6 new 8265 series PCI IDs: - (0x24FD, 0x1130) - (0x24FD, 0x0130) - (0x24FD, 0x0910) - (0x24FD, 0x0930) - (0x24FD, 0x0950) - (0x24FD, 0x0850) Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20iwlwifi: add new 8260 PCI IDsOren Givon1-0/+3
commit 4b79deece5d45396422d469afa11f9d69ccb3d8b upstream. Add 3 new 8260 series PCI IDs: - (0x24F3, 0x10B0) - (0x24F3, 0xD0B0) - (0x24F3, 0xB0B0) Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20iwlwifi: pcie: fix a race in firmware loading flowEmmanuel Grumbach3-17/+28
commit f16c3ebfa64fdf0e2dc88e6baa72da95ab70ffd7 upstream. Upon firmware load interrupt (FH_TX), the ISR re-enables the firmware load interrupt only to avoid races with other flows as described in the commit below. When the firmware is completely loaded, the thread that is loading the firmware will enable all the interrupts to make sure that the driver gets the ALIVE interrupt. The problem with that is that the thread that is loading the firmware is actually racing against the ISR and we can get to the following situation: CPU0 CPU1 iwl_pcie_load_given_ucode ... iwl_pcie_load_firmware_chunk wait_for_interrupt <interrupt> ISR handles CSR_INT_BIT_FH_TX ISR wakes up the thread on CPU0 /* enable all the interrupts * to get the ALIVE interrupt */ iwl_enable_interrupts ISR re-enables CSR_INT_BIT_FH_TX only /* start the firmware */ iwl_write32(trans, CSR_RESET, 0); BUG! ALIVE interrupt will never arrive since it has been masked by CPU1. In order to fix that, change the ISR to first check if STATUS_INT_ENABLED is set. If so, re-enable all the interrupts. If STATUS_INT_ENABLED is clear, then we can check what specific interrupt happened and re-enable only that specific interrupt (RFKILL or FH_TX). All the credit for the analysis goes to Kirtika who did the actual debugging work. Fixes: a6bd005fe92 ("iwlwifi: pcie: fix RF-Kill vs. firmware load race") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20iwlwifi: pcie: enable interrupts before releasing the NIC's CPUEmmanuel Grumbach1-1/+4
commit 2aabdbdc17b7c53490337bfc58de3409c84d85d2 upstream. The NIC's CPU gets started after the firmware has been written to its memory. The first thing it does is to send an interrupt to let the driver know that it is running. In order to get that interrupt, the driver needs to make sure it is not masked. Of course, the interrupt needs to be enabled in the driver before the CPU starts to run. I mistakenly inversed those two steps leading to races which prevented the driver from getting the alive interrupt from the firmware. Fix that. Fixes: a6bd005fe92 ("iwlwifi: pcie: fix RF-Kill vs. firmware load race") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-23Merge tag 'wireless-drivers-for-davem-2016-06-21' of ↵David S. Miller9-15/+30
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.7 iwlwifi * fix the scan timeout for long scans * fix an RCU splat caused when updating the TKIP key * fix a potential NULL-derefence introduced recently * fix a IGTK key bug that has existed since the MVM driver was introduced * fix some fw capabilities checks that got accidentally inverted rtl8xxxu * fix typo on variable name ath10k * fix deadlock when peer cannot be created * fix crash related to printing features * fix deadlock while processing rx_in_ord_ind ath9k * fix GPIO mask regression for AR9462 and AR9565 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16Merge ath-current from ath.gitKalle Valo4-7/+6
ath.git fixes for 4.7. Major changes: ath9k * fix GPIO mask regression with AR9462 and AR9565 ath10k * fix deadlock while processing rx_in_ord_ind * fix crash related to printing firmware features in debug mode * fix deadlock when peer cannot be created
2016-06-16rtl8xxxu: fix typo on variable name, compare against correct variableColin Ian King1-1/+1
path_b_ok is being assigned but immediately after path_a_ok is being compared to the value 0x03. This appears to be a typo on the variable name, compare path_b_ok instead. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-14ath9k: fix GPIO mask for AR9462 and AR9565Miaoqing Pan1-4/+4
The incorrect GPIO mask cause kernel warning, when AR9462 access GPIO11. Also fix the mask for AR9565. WARNING: CPU: 1 PID: 199 at ../drivers/net/wireless/ath/ath9k/hw.c:2778 ath9k_hw_gpio_get+0x1a9/0x1b0 [ath9k_hw] CPU: 1 PID: 199 Comm: kworker/u16:9 Not tainted 4.7.0-rc1-next-20160530+ #5 Hardware name: Acer TravelMate P243/BA40_HC, BIOS V1.01 04/20/2012 Workqueue: events_power_efficient rfkill_poll 0000000000000000 ffff88002cf73d28 ffffffff813b8ddc 0000000000000000 0000000000000000 ffff88002cf73d68 ffffffff8107a331 00000ada00000086 ffff880148d9c018 000000000000000b ffff880147e68720 0000000000000200 Call Trace: [<ffffffff813b8ddc>] dump_stack+0x63/0x87 [<ffffffff8107a331>] __warn+0xd1/0xf0 [<ffffffff8107a41d>] warn_slowpath_null+0x1d/0x20 [<ffffffffc0775b19>] ath9k_hw_gpio_get+0x1a9/0x1b0 [ath9k_hw] [<ffffffffc047f3e4>] ath9k_rfkill_poll_state+0x34/0x60 [ath9k] [<ffffffffc06dbb53>] ieee80211_rfkill_poll+0x33/0x40 [mac80211] [<ffffffffc03ad65a>] cfg80211_rfkill_poll+0x2a/0xc0 [cfg80211] [<ffffffff817c5514>] rfkill_poll+0x24/0x50 [<ffffffff81093183>] process_one_work+0x153/0x3f0 [<ffffffff8109393b>] worker_thread+0x12b/0x4b0 [<ffffffff81093810>] ? rescuer_thread+0x340/0x340 [<ffffffff81099129>] kthread+0xc9/0xe0 [<ffffffff817d8f1f>] ret_from_fork+0x1f/0x40 [<ffffffff81099060>] ? kthread_park+0x60/0x60 Fixes: a01ab81b09c5 ("ath9k: define correct GPIO numbers and bits mask") Reported-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-14ath10k: fix deadlock while processing rx_in_ord_indRajkumar Manoharan1-1/+0
commit 5c86d97bcc1d ("ath10k: combine txrx and replenish task") introduced deadlock while processing rx in order indication message for qca6174 based devices. While merging replenish and txrx tasklets, replenish task should be called out of htt rx ring locking since it is also try to acquire the same lock. Unfortunately this issue is not exposed by other solutions (qca988x, qca99x0 & qca4019), as rx_in_ord_ind message is specific to qca6174 based devices. This patch fixes ============================================= [ INFO: possible recursive locking detected ] 4.7.0-rc2-wt-ath+ #1353 Tainted: G E --------------------------------------------- swapper/3/0 is trying to acquire lock: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [<f8d7ef19>] ath10k_htt_rx_msdu_buff_replenish+0x29/0x90 [ath10k_core] but task is already holding lock: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [<f8d82cab>] ath10k_htt_txrx_compl_task+0x21b/0x250 [ath10k_core] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&htt->rx_ring.lock)->rlock); lock(&(&htt->rx_ring.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by swapper/3/0: #0: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [<f8d82cab>] ath10k_htt_txrx_compl_task+0x21b/0x250 [ath10k_core] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=119151 Fixes: 5c86d97bcc1d ("ath10k: combine txrx and replenish task") Reported-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-10iwlwifi: mvm: fix a few firmware capability checksJohannes Berg1-4/+4
My cleanup in "iwlwifi: prepare for higher API/CAPA bits" accidentally inverted a few tests - fix them. Fixes: 859d914c8f5c ("iwlwifi: prepare for higher API/CAPA bits") Reported-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-06-10iwlwifi: mvm: set the encryption type of an IGTK keyAyala Beker1-0/+8
The FW expect the driver to set the encryption algorithm type when installing the IGTK key in the HW. Currently when installing CMAC IGTK key we don't set the algorithm type and as a result the FW fails to calculate the MIC of multicast management frames. Fix it. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-06-10iwlwifi: mvm: fix potential NULL-dereference in iwl_mvm_reorder()Luca Coelho1-1/+3
We try to access sta before we check for IS_ERR_OR_NULL(), so we may end up accessing a NULL pointer. To prevent that, move the conversion from sta to mvm_sta below the check. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-06-10iwlwifi: mvm: fix RCU splat in TKIP's update_keyEmmanuel Grumbach1-1/+7
The commit below mistakenly changed an rcu_dereference_check to a rcu_dereference_protected which introduced the following RCU warning: [ INFO: suspicious RCU usage. ] 4.6.0-rc7-next-20160513-dbg-00004-g8de8b92-dirty #655 Not tainted ------------------------------- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:1069 suspicious rcu_dereference_protected() usage! Call Trace: [<ffffffff8106b836>] lockdep_rcu_suspicious+0xf7/0x100 [<ffffffffa03b2321>] iwl_mvm_get_key_sta.part.0+0x5d/0x80 [iwlmvm] [<ffffffffa03b4acb>] iwl_mvm_update_tkip_key+0xd3/0x162 [iwlmvm] [<ffffffffa03a2b60>] iwl_mvm_mac_update_tkip_key+0x17/0x19 [iwlmvm] [<ffffffffa0329646>] ieee80211_tkip_decrypt_data+0x22c/0x24b [mac80211] [<ffffffffa0318bb1>] ieee80211_crypto_tkip_decrypt+0xc5/0x110 [mac80211] [<ffffffffa033102e>] ieee80211_rx_handlers+0x9bb/0x1fe1 [mac80211] Fixes: 13303c0fb148 ("iwlwifi: mvm: use helpers to get iwl_mvm_sta") Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-06-10iwlwifi: mvm: increase scan timeout to 20 secondsLuca Coelho1-1/+1
The 16 seconds timeout we were using turned out to be too short. Recalculations by system show that the total time in both bands should be < 18.5 seconds, even in the slowest cases (e.g. DCM P2P with DTIM=2). Rounding it up to 20 seconds for a bit more safety. Fixes: 728e825f81b1 ("iwlwifi: mvm: add a scan timeout for regular scans") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-06-07ath10k: fix crash related to printing featuresBen Greear1-1/+1
This looks like a regression from commit c4cdf753ed42 ("ath10k: move fw_features to struct ath10k_fw_file"), we were printing the features from a wrong struct. Fixes: c4cdf753ed42 ("ath10k: move fw_features to struct ath10k_fw_file") Signed-off-by: Ben Greear <greearb@candelatech.com> [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-06ath10k: fix deadlock when peer cannot be createdBen Greear1-1/+1
We must not attempt to send WMI packets while holding the data-lock, as it may deadlock: BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath10k/wmi.c:1824 in_atomic(): 1, irqs_disabled(): 0, pid: 2878, name: wpa_supplicant ============================================= [ INFO: possible recursive locking detected ] 4.4.6+ #21 Tainted: G W O --------------------------------------------- wpa_supplicant/2878 is trying to acquire lock: (&(&ar->data_lock)->rlock){+.-...}, at: [<ffffffffa0721511>] ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] but task is already holding lock: (&(&ar->data_lock)->rlock){+.-...}, at: [<ffffffffa070251b>] ath10k_peer_create+0x122/0x1ae [ath10k_core] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&ar->data_lock)->rlock); lock(&(&ar->data_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by wpa_supplicant/2878: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff816493ca>] rtnl_lock+0x12/0x14 #1: (&ar->conf_mutex){+.+.+.}, at: [<ffffffffa0706932>] ath10k_add_interface+0x3b/0xbda [ath10k_core] #2: (&(&ar->data_lock)->rlock){+.-...}, at: [<ffffffffa070251b>] ath10k_peer_create+0x122/0x1ae [ath10k_core] #3: (rcu_read_lock){......}, at: [<ffffffffa062f304>] rcu_read_lock+0x0/0x66 [mac80211] stack backtrace: CPU: 3 PID: 2878 Comm: wpa_supplicant Tainted: G W O 4.4.6+ #21 Hardware name: To be filled by O.E.M. To be filled by O.E.M./ChiefRiver, BIOS 4.6.5 06/07/2013 0000000000000000 ffff8801fcadf8f0 ffffffff8137086d ffffffff82681720 ffffffff82681720 ffff8801fcadf9b0 ffffffff8112e3be ffff8801fcadf920 0000000100000000 ffffffff82681720 ffffffffa0721500 ffff8801fcb8d348 Call Trace: [<ffffffff8137086d>] dump_stack+0x81/0xb6 [<ffffffff8112e3be>] __lock_acquire+0xc5b/0xde7 [<ffffffffa0721500>] ? ath10k_wmi_tx_beacons_iter+0x15/0x11a [ath10k_core] [<ffffffff8112d0d0>] ? mark_lock+0x24/0x201 [<ffffffff8112e908>] lock_acquire+0x132/0x1cb [<ffffffff8112e908>] ? lock_acquire+0x132/0x1cb [<ffffffffa0721511>] ? ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [<ffffffffa07214eb>] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [<ffffffff816f9e2b>] _raw_spin_lock_bh+0x31/0x40 [<ffffffffa0721511>] ? ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [<ffffffffa0721511>] ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [<ffffffffa07214eb>] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [<ffffffffa062eb18>] __iterate_interfaces+0x9d/0x13d [mac80211] [<ffffffffa062f609>] ieee80211_iterate_active_interfaces_atomic+0x32/0x3e [mac80211] [<ffffffffa07214eb>] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [<ffffffffa071fa9f>] ath10k_wmi_tx_beacons_nowait.isra.13+0x14/0x16 [ath10k_core] [<ffffffffa0721676>] ath10k_wmi_cmd_send+0x71/0x242 [ath10k_core] [<ffffffffa07023f6>] ath10k_wmi_peer_delete+0x3f/0x42 [ath10k_core] [<ffffffffa0702557>] ath10k_peer_create+0x15e/0x1ae [ath10k_core] [<ffffffffa0707004>] ath10k_add_interface+0x70d/0xbda [ath10k_core] [<ffffffffa05fffcc>] drv_add_interface+0x123/0x1a5 [mac80211] [<ffffffffa061554b>] ieee80211_do_open+0x351/0x667 [mac80211] [<ffffffffa06158aa>] ieee80211_open+0x49/0x4c [mac80211] [<ffffffff8163ecf9>] __dev_open+0x88/0xde [<ffffffff8163ef6e>] __dev_change_flags+0xa4/0x13a [<ffffffff8163f023>] dev_change_flags+0x1f/0x54 [<ffffffff816a5532>] devinet_ioctl+0x2b9/0x5c9 [<ffffffff816514dd>] ? copy_to_user+0x32/0x38 [<ffffffff816a6115>] inet_ioctl+0x81/0x9d [<ffffffff816a6115>] ? inet_ioctl+0x81/0x9d [<ffffffff81621cf8>] sock_do_ioctl+0x20/0x3d [<ffffffff816223c4>] sock_ioctl+0x222/0x22e [<ffffffff8121cf95>] do_vfs_ioctl+0x453/0x4d7 [<ffffffff81625603>] ? __sys_recvmsg+0x4c/0x5b [<ffffffff81225af1>] ? __fget_light+0x48/0x6c [<ffffffff8121d06b>] SyS_ioctl+0x52/0x74 [<ffffffff816fa736>] entry_SYSCALL_64_fastpath+0x16/0x7a Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-05Merge tag 'wireless-drivers-for-davem-2016-06-04' of ↵David S. Miller3-3/+21
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.7 brcmfmac * add fallback RSSI report for devices that do not report per-chain values * fix a null pointer derefence regression on PCIe full dongle devices rtlwifi * fix scheduling while atomic regression from commit 49f86ec21c01 MAINTAINERS * add file patterns for wireless device tree bindings ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03brcmfmac: add eth_type_trans back for PCIe full dongleFranky Lin1-0/+2
A regression was introduced in commit 9c349892ccc9 ("brcmfmac: revise handling events in receive path") which moves eth_type_trans() call to brcmf_rx_frame(). Msgbuf layer doesn't use brcmf_rx_frame() but invokes brcmf_netif_rx() directly. In such case the Ethernet header was not stripped out resulting in null pointer dereference in the networking stack. BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: fuse ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype [...] rtsx_pci scsi_mod usbcore usb_common i8042 serio nvme nvme_core CPU: 7 PID: 1340 Comm: irq/136-brcmf_p Not tainted 4.7.0-rc1-mainline #1 Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 01.02.00 04/07/2016 task: ffff8804a0c5bd00 ti: ffff88049e124000 task.ti: ffff88049e124000 RIP: 0010:[<ffffffff814c3ce6>] [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 RSP: 0018:ffff88049e127ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8804bddd7c40 RCX: 000000000000002f RDX: 0000000000000000 RSI: 0000000000000007 RDI: ffff8804bddd7d4c RBP: ffff88049e127ce8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8804bddd12c0 R11: 000000000000149e R12: 0000000000017c40 R13: ffff88049e127d08 R14: ffff8804a9bd6d00 R15: ffff8804bddd7d4c FS: 0000000000000000(0000) GS:ffff8804bddc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000048 CR3: 0000000001806000 CR4: 00000000003406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8804bdddad00 ffff8804ad089e00 0000000000000000 0000000000000282 0000000000000000 ffff8804a9bd6d00 ffff8804a1b27e00 ffff8804a9bd6d00 ffff88002ee88000 ffff88049e127d28 ffffffff814c3f3b ffffffff81311fc3 Call Trace: [<ffffffff814c3f3b>] netif_rx_internal+0x4b/0x170 [<ffffffff81311fc3>] ? swiotlb_tbl_unmap_single+0xf3/0x120 [<ffffffff814c5467>] netif_rx_ni+0x27/0xc0 [<ffffffffa08519e9>] brcmf_netif_rx+0x49/0x70 [brcmfmac] [<ffffffffa08564d4>] brcmf_msgbuf_process_rx+0x2b4/0x570 [brcmfmac] [<ffffffff81020017>] ? __xen_set_pgd_hyper+0x57/0xd0 [<ffffffff810d60b0>] ? irq_forced_thread_fn+0x70/0x70 [<ffffffffa0857381>] brcmf_proto_msgbuf_rx_trigger+0x31/0xe0 [brcmfmac] [<ffffffffa0861e8f>] brcmf_pcie_isr_thread+0x7f/0x110 [brcmfmac] [<ffffffff810d60d0>] irq_thread_fn+0x20/0x50 [<ffffffff810d63ad>] irq_thread+0x12d/0x1c0 [<ffffffff815d07d5>] ? __schedule+0x2f5/0x7a0 [<ffffffff810d61d0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff810d6280>] ? irq_thread_dtor+0xb0/0xb0 [<ffffffff81098ea8>] kthread+0xd8/0xf0 [<ffffffff815d4b7f>] ret_from_fork+0x1f/0x40 [<ffffffff81098dd0>] ? kthread_worker_fn+0x170/0x170 Code: 1c f5 60 9a 8e 81 9c 58 0f 1f 44 00 00 48 89 45 d0 fa 66 0f 1f 44 00 00 4c 8d bb 0c 01 00 00 4c 89 ff e8 5e 08 11 00 49 8b 56 20 <48> 8b 52 48 83 e2 01 74 10 8b 8b 08 01 00 00 8b 15 59 c5 42 00 RIP [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 RSP <ffff88049e127ca0> CR2: 0000000000000048 Fixes: 9c349892ccc9 ("brcmfmac: revise handling events in receive path") Reported-by: Rafal Milecki <zajec5@gmail.com> Reported-by: Grey Christoforo <grey@christoforo.net> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> [arend@broadcom.com: rephrased the commit message] Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-02Merge tag 'mac80211-for-davem-2016-06-01' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Three small fixes for the current cycle: * missing netlink attribute check in hwsim wmediumd (Martin) * fast xmit structure alignment fix (Felix) * mesh path flush/synchronisation fix (Bob) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31mac80211_hwsim: Add missing check for HWSIM_ATTR_SIGNALMartin Willi1-0/+1
A wmediumd that does not send this attribute causes a NULL pointer dereference, as the attribute is accessed even if it does not exist. The attribute was required but never checked ever since userspace frame forwarding has been introduced. The issue gets more problematic once we allow wmediumd registration from user namespaces. Cc: stable@vger.kernel.org Fixes: 7882513bacb1 ("mac80211_hwsim driver support userspace frame tx/rx") Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-28remove lots of IS_ERR_VALUE abusesArnd Bergmann1-2/+2
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27rtlwifi: Fix scheduling while atomic error from commit 49f86ec21c01Larry Finger1-3/+3
Commit 49f86ec21c01 ("rtlwifi: Change long delays to sleeps") was correct for most cases; however, driver rtl8192ce calls the affected routines while in atomic context. The kernel bug output is as follows: BUG: scheduling while atomic: wpa_supplicant/627/0x00000002 [...] [<ffffffff815c2b39>] __schedule+0x899/0xad0 [<ffffffff815c2dac>] schedule+0x3c/0x90 [<ffffffff815c5bb2>] schedule_hrtimeout_range_clock+0xa2/0x120 [<ffffffff810e8b80>] ? hrtimer_init+0x120/0x120 [<ffffffff815c5ba6>] ? schedule_hrtimeout_range_clock+0x96/0x120 [<ffffffff815c5c43>] schedule_hrtimeout_range+0x13/0x20 [<ffffffff815c568f>] usleep_range+0x4f/0x70 [<ffffffffa0667218>] rtl_rfreg_delay+0x38/0x50 [rtlwifi] [<ffffffffa06dd0e7>] rtl92c_phy_config_rf_with_headerfile+0xc7/0xe0 [rtl8192ce] To fix this bug, three of the changes from delay to sleep are reverted. Unfortunately, one of the changes involves a delay of 50 msec. The calling code will be modified so that this long delay can be avoided; however, this change is being pushed now to fix the problem in kernel 4.6.0. Fixes: 49f86ec21c01 ("rtlwifi: Change long delays to sleeps") Reported-by: James Feeney <james@nurealm.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: James Feeney <james@nurealm.net> Cc: Stable <stable@vger.kernel.org> [4.6+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-05-27brcmfmac: add fallback for devices that do not report per-chain valuesJaap Jan Meijer1-0/+16
If brcmf_cfg80211_get_station fails to determine the RSSI from the per-chain values get the value individually as a fallback. Fixes: 1f0dc59a6de9 ("brcmfmac: rework .get_station() callback") Signed-off-by: Jaap Jan Meijer <jjmeijer88@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-10-24 17:33:54 +0300