summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rndis_wlan.c
AgeCommit message (Collapse)AuthorFilesLines
2010-03-11rndis_wlan: Implement cfg80211 PMKSA APIJussi Kivilinna1-0/+282
Add support for cfg80211 set_pmksa/del_pmksa/flush_pmksa. Updating PMKID entry list is done on driver side since NDIS API requires full list update. v2: - fixed to use new netdev_dbg/warn/etc instead of old devdbg/warn/etc - fixed false padding from struct ndis_80211_bssid_info Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11rndis_wlan: get max_num_pmkids from deviceJussi Kivilinna1-2/+33
Extend rndis_wlan_get_caps() to get 802.11 capabilities and maximum supported number of PMKIDs by device. v2: fixed to use new netdev_dbg/warn/etc instead of old devdbg/warn/etc Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11rndis_wlan: remove unused variables from priv structureJussi Kivilinna1-14/+0
Some variables were left unused after cfg80211 conversion. Remove those and related deadcode. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11rndis_wlan: copy only useful data from rndis_command respondJussi Kivilinna1-4/+29
rndis_query_oid() uses full output buffer size to copy response buffer from rndis_command()/device. This doesn't cause problems as response buffer is sized based on output buffer but does copy extra unset bytes. So change rndis_query_oid() so that only meaningful bytes are being copied. Also in case of malfunctioning device/cable/etc returned data offset from device might be wrong so bound check memory access correctly, so add checks for this. v2: fixed to use new netdev_dbg/warn/etc instead of old devdbg/warn/etc Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-04rndis_wlan: correct multicast_list handling V3Jiri Pirko1-25/+41
My previous patch (655ffee284dfcf9a24ac0343f3e5ee6db85b85c5) added locking in a bad way. Because rndis_set_oid can sleep, there is need to prepare multicast addresses into local buffer under netif_addr_lock first, then call rndis_set_oid outside. This caused reorganizing of the whole function. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reported-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28wireless: convert to use netdev_for_each_mc_addrJiri Pirko1-7/+8
also added missed locking in rndis_wlan.c Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18usbnet: Convert dev(dbg|err|warn|info) macros to netdev_<level>Joe Perches1-152/+173
These macros are too similar to the dev_<level> equivalents but take a usbnet * argument. Convert them to the recently introduced netdev_<level> macros and remove the old macros. The old macros had "\n" appended to the format string. Add the "\n" to the converted uses. Some existing uses of the dev<foo> macros in cdc_eem.c probably mistakenly had trailing "\n". No "\n" added there. Fix net1080 this/other log message inversion. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko1-3/+3
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-22rndis_wlan: copy module parameters for bcm4320a devices tooJussi Kivilinna1-0/+5
rndis_wlan didn't copy module parameters for bcm4320a to private structure. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-22rndis_wlan: move copy of module parameters to separate functionJussi Kivilinna1-15/+22
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-24rndis_wlan: disable stall workaroundJussi Kivilinna1-3/+3
Stall workaround doesn't work with bcm4320a devices like with bcm4320b. This workaround actually causes more stalls/device freeze on bcm4320a. Therefore disable stall workaround by default. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-24rndis_wlan: fix buffer overflow in rndis_query_oidJussi Kivilinna1-2/+3
rndis_query_oid overwrites *len which stores buffer size to return full size of received command and then uses *len with memcpy to fill buffer with command. Ofcourse memcpy should be done before replacing buffer size. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-16rndis_wlan: handle NL80211_AUTHTYPE_AUTOMATICJussi Kivilinna1-0/+2
rndis_wlan didn't know about NL80211_AUTHTYPE_AUTOMATIC and simple setup with 'iwconfig wlan essid no-encrypt' would fail (ENOSUPP). v2: use NDIS_80211_AUTH_AUTO_SWITCH instead of _OPEN. This will make device try shared key auth first, then open. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01rndis_wlan: fix sparse endianess warningsJussi Kivilinna1-4/+4
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01rndis_wlan: cleanupJussi Kivilinna1-55/+7
- remove double newlines between functions - remove commented out function (rndis_set_config_parameter_u32()) - coding style fix in rndis_set_config_parameter_str() - add comment banners between function sections Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-01rndis_wlan: use bool for on/off switchesJussi Kivilinna1-14/+14
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: use cfg80211_wext_handlerJussi Kivilinna1-421/+0
Now that cfg80211 functions are added and wext converted to use wext-compat functions, remove wext structures and disabled code. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: disable IWEVPMKIDCAND wireless eventJussi Kivilinna1-2/+5
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: convert mic failure wireless event to cfg80211Jussi Kivilinna1-15/+17
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: remove unneeded SIOCSIWCOMMITJussi Kivilinna1-8/+0
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: rename wireless stats worker to device pollerJussi Kivilinna1-17/+19
Stats worker no longer poll stats from device anymore. It's still needed to poll device control channel for connect/disconnect events, so rename stats worker as device poller. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: add cfg80211 dump_stationJussi Kivilinna1-0/+20
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: add cfg80211 get_stationJussi Kivilinna1-61/+57
Add cfg80211 get_station and convert SIOCGIWRATE and get_wireless_stats to cfg80211. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: add cfg80211 key handlingJussi Kivilinna1-30/+103
Add cfg80211 add_key/del_key/set_default_key and convert wext to use theim. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: add cfg80211 set_channelJussi Kivilinna1-90/+15
Add cfg80211 set_channel and convert wext to use it. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: add cfg80211 connect, disconnect, join_ibss and leave_ibssJussi Kivilinna1-209/+460
Add cfg80211 connect functions for station and ad-hoc modes and convert wext to use theim. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: enable infrastructure before setting random essidJussi Kivilinna1-0/+6
Random essid must be set to turn on radio when not connected. If device is in ad-hoc mode, this results 'media connect' indications with the random essid which should be ignored. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: set ieee80211_ptr->iftype in rndis_change_virtual_intfJussi Kivilinna1-1/+4
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: use is_zero_ether_addr() and is_broadcast_ether_addr()Jussi Kivilinna1-11/+6
Use is_zero_ether_addr() and is_broadcast_ether_addr() instead of memcmp against ffff_bssid/zero_bssid. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: move link up/down work to separate functionsJussi Kivilinna1-46/+55
Move link up/down work to separate functions and use local array for allocating memory for info structure instead of kzmalloc. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: increase scan timer delayJussi Kivilinna1-1/+1
Increase scan delay from 1 sec to 6 sec. Spec says that scan by OID_802_11_BSSID_LIST_SCAN completes in 6 seconds. Before rfkill patch too short delay was not problem as device was always active (radio on) and performing background scanning. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: resize bssid list if too smallJussi Kivilinna1-2/+15
Buffer used for bssid list might be too small. Change rndis_query_oid() to return required buffer length to caller and make rndis_check_bssid_list() resize buffer when needed. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: get bssid scan list before new scanJussi Kivilinna1-0/+6
OID_802_11_BSSID_LIST_SCAN clears device's bssid list, so retrieve current bssid list from device before issuing new scan. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: ignore OID_802_11_ADD_KEY triggered media connect indicationsJussi Kivilinna1-0/+17
Setting WPA keys with OID_802_11_ADD_KEY sometimes trigger instant media connect indication. These indications are extranous and should be ignored, as otherwise driver would send reassociation event to userspace which in this case is not needed. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: set cipher suites for cfg80211Jussi Kivilinna1-1/+14
rndis_wlan does not set cipher suites list for cfg80211 which causes wext-compat-range to report rndis_wlan not supporting WPA. Patch adds cipher suites list and fixes NetworkManager not being able to connect to WPA encrypted APs. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: fix broken logic in add_wep_key()Jussi Kivilinna1-1/+1
add_wep_key() tries to check if key length is not 5 AND not 13 but uses (key_len != 5 || key_len != 13) instead. Fix this. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14usbnet: add rx queue pausingJussi Kivilinna1-1/+12
Add rx queue pausing to usbnet. This is needed by rndis_wlan so that it can control rx queue and prevent received packets from being send forward before rndis_wlan receives and handles 'media connect'-indication. Without this establishing WPA connections is hard and fail often. [v2] - removed unneeded use of skb_clone Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-05rndis_wlan: rework key handlingJussi Kivilinna1-46/+142
Organize key data in private structure better and store WPA keys, so they can be restored as WEP keys. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-05rndis_wlan: add missing padding to struct rndis_80211_remove_keyJussi Kivilinna1-0/+1
OID_802_11_REMOVE_KEY failed with invalid length error, add missing padding to structure fix this. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-05rndis_wlan: handle 802.11 indications from deviceJussi Kivilinna1-1/+232
Add handling for 802.11 specific rndis indications. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-05rndis_host: allow rndis_wlan to see all indicationsJussi Kivilinna1-6/+25
Allow rndis_wlan to see all indications. Currently rndis_host lets rndis_wlan to know about link state changes only, but there is whole set of other 802.11-specific indications that rndis_wlan should handle properly. So rename link_change() to indication() and convert rndis_wlan to use it. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-05rndis_wlan: add rndis_set/query_oid debuggingJussi Kivilinna1-2/+84
Add better debugging for failed OID queries. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-05rndis_wlan: set current packet filter to zero on stopJussi Kivilinna1-1/+9
Set current packet filter to zero to block receiving data packets from device. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-05rndis_wlan: reset device and restore multicast list on rndis_wlan_reset()Jussi Kivilinna1-0/+30
Reset device properly with RNDIS_MSG_RESET in rndis_wlan_reset() and restore multicast list afterwards. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-05rndis_wlan: clear cfg80211 scan on rndis_wlan_stop()Jussi Kivilinna1-0/+8
Scanning gets stuck if device is stopped when scan is active. Fix by clearing/aborting cfg80211 scan on rndis_wlan_stop(). Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-05rndis_wlan: stop workers on rndis_wlan_stop() and restore on rndis_wlan_reset()Jussi Kivilinna1-4/+19
Driver doesn't need to poll statistics/link status when stopped. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-05usbnet: allow "minidriver" to prevent urb unlinking on usbnet_stopJussi Kivilinna1-3/+6
rndis_wlan devices freeze after running usbnet_stop several times. It appears that firmware freezes in state where it does not respond to any RNDIS commands and device have to be physically unplugged/replugged. This patch lets minidrivers to disable unlink_urbs on usbnet_stop through new info flag. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10rndis_wlan: convert set/get txpower to cfg80211Jussi Kivilinna1-73/+75
Convert set/get txpower to cfg80211 and add stop netdev handler to turn off radio for rfkill. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10rndis_wlan: convert get/set frag/rts to cfg80211Jussi Kivilinna1-72/+63
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: pass netdev to change_virtual_intfJohannes Berg1-10/+5
If there was a reason I'm passing the ifidx I cannot remember it any more and don't see one now, so let's just pass the pointer itself. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-31 17:23:37 +0300