summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/mvm/rs.h
AgeCommit message (Collapse)AuthorFilesLines
2015-03-01iwlwifi: mvm: rs: avoid ss_force from being reset after tx idleEyal Shapira1-3/+3
ss_force is a debugging option to force a certain single stream tx mode. It's not useful if it gets reset after tx idle. Fix that. While at it also make sure any code touching ss_force will only get compiled if debugfs support is configured. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: rs: adapt rate matching to new STBC/BFEREyal Shapira1-0/+1
Once the FW supports autonomous decision between STBC/BFER/SISO we no longer set the STBC bit and ANT_AB in the rate table. However the FW rate in the tx response will have the STBC or BFER bit set and the antennas set to ANT_AB in case these were chosen by it. This will cause us to discard any such response as unmatching the current LQ table and thus break the rs search cycle completely. Fix this by relaxing the rate matching in case we're working with the new API and STBC/BFER are used. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-02-01iwlwifi: mvm: rs: enable forcing single stream Tx decisionEyal Shapira1-0/+10
In certain testing scenarios we'd like to force a decision between STBC/BFER/SISO. In the normal scenario this decision is done by the FW. Enable this option vis debugfs. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-02-01iwlwifi: mvm: add beamformer supportEyal Shapira1-1/+3
VHT Beamformer (BFER) will be used if the peer supports it and there's a benefit to use it vs. STBC or SISO. The driver now tells the FW whether BFER and/or STBC are allowed but the FW will make the decision to use either or stick to SISO on its own. BFER is limited to a single remote peer. The driver takes care of ensuring this to the FW and prioritizes with which peer BFER will be used. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: rs: organize and cleanup constsEyal Shapira1-39/+0
Organize and cleanup the consts used by rs. This is part of making some of these configurable. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: rs: add Tx STBC supportEyal Shapira1-0/+2
STBC is enabled on HT/VHT SISO rates in case we don't care about power consumption and it won't hurt BT. This is done only in case the peer and our chip support STBC of course. While at it fixed a bug which was causing bw and ldpc flags to be set incorrectly in the rate scale table in case we are switching to a legacy Tx column. This had no real impact. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: mvm: rs: refactor to allow direct rs updatingEyal Shapira1-0/+4
Enable RS to get updated directly via iwl_mvm_rs_tx_status which will be called by the driver and not via mac80211 rate control. This is required for a following patch to report on BAs which do not cause the BA window to progress. Also this is a first step in decoupling rs from the mac80211 rate control. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: rs: don't zero tx stats after idleEyal Shapira1-3/+4
Move the tx stats to the persistent area of lq_sta to avoid them being zeroed out every time rs reinitializes which happens after tx idle for 5 secs for example. The automatic zeroing out made them difficult to use. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: rs: remove max_rate_idxEyal Shapira1-1/+0
max_rate_idx constraint is deprecated and it's handling is faulty as well as it is relevant only for legacy rates but was considered in HT/VHT. In most cases there was no side effect as max_rate_idx was set to -1 but in certain cases like P2P it got set to an actual rate idx which would limit the maximum rate in HT/VHT by mistake. max_rate_idx should be replaced by the masks fields but for now remove it. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: add LDPC supportEyal Shapira1-0/+2
Use LDPC for Tx and publish support for Rx in case the chip supports LDPC. Enable it for the 7265 family. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: rs: don't save debugfs filesEliad Peller1-5/+0
These file are removed recursively anyway, so there's no point saving them just to redundantly remove them later. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-07iwlwifi: mvm: rs: don't clear persistent fieldsEliad Peller1-10/+14
iwl_mvm_rs_rate_init() is called multiple times to re-init the rate scaling statistics (e.g. after some idle time). It clears all the lq_sta sta, including some fields that shouldn't be cleared (e.g. debugfs pointers). Fix it by adding a new 'persistent' sub-struct, and avoid clearing it on (re-)init. Move the initialization of the persistent fields to rs_alloc_sta instead. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-22Merge branch 'master' of ↵John W. Linville1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-04-13iwlwifi: mvm: rs: reinit rs if no tx for a long timeEyal Shapira1-0/+1
After being idle for a long time (>5sec) the rs statistics will be stale so we prefer to reset rs and start from legacy rates again. This gives better results when the attenuation increased signficantly (e.g. we got further from the AP) and after a while we start Tx Note that the first Tx after the idle period will still go out in the old modulation and rate but this seemed a simpler approach compared to adding a timer or modifying mac80211 for this. The negative impact is negligble as we'll recover quickly. Cc: <stable@vger.kernel.org> [3.14] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: rs: fix and cleanup rs_get_rate_actionEyal Shapira1-0/+1
Change the down/upscale decision logic a bit to be based on different success ratio thresholds. This fixes the implementation compared to the rate scale algorithm which was planned to yield optimal results. Also fix a case where a lower rate wasn't explored despite being a potential for better throughput. While at it rewrite rs_get_rate_action to be more clear and clean. Cc: <stable@vger.kernel.org> [3.14] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: rs: use correct max expected throughput figuresEyal Shapira1-3/+9
The selection of the max expected throughput for a column didn't take into account the maximal allowed rate for the current peer. This can cause unnecessary switches during the search cycle to columns which have no chance of beating the current throughput. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: add per rate tx statsEyal Shapira1-0/+10
Collect accumulated stats of tx attempts and successes per rate and column for debugging purposes. These stats can be read via debugfs file drv_tx_stats and can also be reset by writing to this file. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: add debugfs file for fixed reduced tx powerEliad Peller1-0/+2
Allow fixing the tx power reduction through debugfs file. The change doesn't take affect immediately, but will be considered the next time tpc is evaluated. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-04-13iwlwifi: mvm: add ATPC implementationEliad Peller1-0/+12
Implement Adaptive Tx Power Control algorithm. ATPC basically tries to decrease the tx power as much as possible while the throughput is not being hurt. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-04iwlwifi: rs: use const u16 for throughput tablesJohannes Berg1-1/+1
This makes the code a little bit longer as zero-extension has to be done (mov vs. movzwl), but that's miniscule and the space saving is significant, about 600 bytes in DVM and 700 bytes in MVM, so the cache effect should be worth the few bytes more code. While at it, remove two spurious blank lines in variable declaration blocks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-31iwlwifi: Update Copyright to 2014Emmanuel Grumbach1-1/+1
Happy new year! Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: mvm: rs: avoid recalc of supported legacy rate maskEyal Shapira1-1/+0
The supported legacy rate mask is initialized when rs is initialized based on the remote peer supported rates. There's no need to re mask it repeatedly with the supported remote peer rates. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-17iwlwifi: mvm: rs: refactor building the LQ commandEyal Shapira1-1/+0
Simplify the code a bit more by extracting the rates table building logic into a separate function and handle setting a fixed rate for debug in a separate flow. Also avoid using and saving ucode rate format in different places. Instead use rs_rate struct and convert to ucode format only when filling the rates table in the LQ command. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: rs: overhaul search cycle state machineEyal Shapira1-36/+28
Rewrite the search cycle state machine to use a more data oriented approach where the different Tx columns (configs) limitations and next columns to search are reprsented in tables which are easy to change. This overhaul also includes several major fixes: 1. Prevent going back to a specific Tx column in a search cycle if it was already explored. 2. Avoid switching to a Tx column that doesn't have any chance if it performs perfectly to beat the current throughput we're getting. These issues were degrading throughput as they were causing switching to "bad" Tx columns. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: rs: refactor to use rs_rateEyal Shapira1-20/+40
Introduce rs_rate which represents a rate. Use this structure instead of iwl_scale_tbl_info where we're dealing with a single rate. This avoids allocating the big iwl_scale_tbl_info structure on the stack in several cases like converting to ucode rate format or from ucode rate format. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: rs: remove unused timestamp fieldEyal Shapira1-1/+0
Remove this as it's unused. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: rs: rename thresholds definesEyal Shapira1-1/+1
Rename for clearer names. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: stop using MIMO in case BT doesn't allow itEyal Shapira1-13/+0
Switch to using the new btcoex decision api regarding MIMO and stop accessing the internal btcoex structs. In case MIMO should be disabled it would detect this upon the next Tx and force a search. The search will switch to SISO on a antenna A which isn't used by BT. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: fix check for a single rx antennaEyal Shapira1-8/+0
valid_rx_ant is a bitmask of available antennas and not the number of Rx antennas. Use num_of_ant and remove duplicate definitions in both dvm and mvm. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-10iwlwifi: mvm: implement rate_update hook in rsEyal Shapira1-1/+1
Re-initialize rs when we get a rate_update hook called which happens when remote STA changes bandwidth or sends a VHT opmode notification. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-04Merge branch 'master' of ↵John W. Linville1-58/+96
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
2013-10-02iwlwifi: mvm: remove GF support in rsEyal Shapira1-1/+0
mvm doesn't support HT GF so drop all relevant code in rs. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02iwlwifi: mvm: support VHT in rsEyal Shapira1-43/+74
Enable rs algorithm to use VHT rates and use 80Mhz. This enables reaching VHT rates which wasn't possible. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02iwlwifi: mvm: remove rs FSM actions relevant only for 3 antennasEyal Shapira1-14/+22
The XXX_SWITCH_ANTENNA1/2 actions keep track of switching between 3 single antennas or between 3 pairs in case of MIMO2 on a MIMO3 device. As current and future chips will have at most 2 antennas drop these. While at it also convert the actions into enums and cleanup the code a bit. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-25iwlwifi: Remove extern from function prototypesJoe Perches1-5/+4
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com>
2013-08-12iwlwifi: mvm: remove MIMO3 from rate scale codeEyal Shapira1-35/+6
Current and future chips supported by mvm will only have a maximum of 2 antennas so all the MIMO3 related code and states can be dropped. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12iwlwifi: mvm: remove unused fields of iwl_rs_rate_infoEyal Shapira1-22/+0
Some more cleanups of unused fields and their initializations. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12iwlwifi: mvm: remove rate_scale_data debugfs entryEyal Shapira1-1/+0
This isn't very informative and can be deduced from rate_scale_table. Remove as a preparation for dropping iwl_rs_rate_info.ieee. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-06iwlwifi: mvm: remove traffic load monitoring in rsEyal Shapira1-12/+0
The traffic load monitoring isn't used anymore to decide whether a Tx aggregation on a specific TID should be started. No point in collecting these statistics. Remove the relevant code. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16iwlwifi: mvm: remove unneeded argument from iwl_mvm_tx_protection()Johannes Berg1-2/+2
The LQ command argument isn't needed, it's always taken from the station struct that's already passed, remove the argument. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-06-04iwlwifi: mvm: don't enable MIMO when BT is activeEmmanuel Grumbach1-0/+12
Another step in the rate control / BT Coex integration Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29iwlwifi: mvm: add thermal throttling and CT killEytan Lifshitz1-0/+5
In order to avoid NIC destruction due to high temperature, CT kill will power down the NIC. To avoid this, thermal throttling will decrease throughput to prevent the NIC from reaching the temperature at which CT kill is performed. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-01iwlwifi: add the MVM driverJohannes Berg1-0/+393
Newer firmware revisions have a completely new firmware API. This is the new driver for this new API. I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Cc: Alexander Bondar <alexander.bondar@intel.com> Cc: Amit Beka <amit.beka@intel.com> Cc: Amnon Paz <amnonx.paz@intel.com> Cc: Assaf Krauss <assaf.krauss@intel.com> Cc: David Spinadel <david.spinadel@intel.com> Cc: Dor Shaish <dor.shaish@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Eytan Lifshitz <eytan.lifshitz@intel.com> Cc: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 19:11:36 +0300