summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-2000.c
AgeCommit message (Collapse)AuthorFilesLines
2013-05-27iwlwifi: move some configuration parameters into DVMJohannes Berg1-36/+3
There are a number of parameters that aren't really hardware specific but rather define how the DVM firmware is used. Move these into the DVM configuration. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: make device configuration bus agnosticEmmanuel Grumbach1-0/+242
Newer devices can work on different buses. This means that their configuration can be shared between different buses. Hence the configuration structures should exported to all the buses and not only to PCIE. Change this. Note that this requires all the fields to be the same amongst the buses. If differences will appear, we can always define a part that is bus dependent. Today, this is not needed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: move PCIe into subdirectoryJohannes Berg1-225/+0
Structure the code a bit more and move all PCIe code including the hardware configuration files into a PCIe specific subdirectory. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-05-25iwlwifi: do not use shadow registers by defaultMeenakshi Venkataraman1-2/+2
Shadow registers in the device are meant to allow the driver to update certain device registers without needing to wake up all components of the device. However, using this feature in the device causes communication between the driver and the device to become unreliable, resulting in host command timeouts. Disable this feature by default till a fix is available for the bug. Cc: stable@vger.kernel.org #2.6.38+ Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-8/+8
Conflicts: drivers/net/ethernet/intel/e1000e/param.c drivers/net/wireless/iwlwifi/iwl-agn-rx.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c drivers/net/wireless/iwlwifi/iwl-trans.h Resolved the iwlwifi conflict with mainline using 3-way diff posted by John Linville and Stephen Rothwell. In 'net' we added a bug fix to make iwlwifi report a more accurate skb->truesize but this conflicted with RX path changes that happened meanwhile in net-next. In e1000e a conflict arose in the validation code for settings of adapter->itr. 'net-next' had more sophisticated logic so that logic was used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-24iwlwifi: use correct released ucode versionMeenakshi Venkataraman1-8/+8
Report correctly the latest released version of the iwlwifi firmware for all iwlwifi-supported devices. Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-24iwlwifi: clean up some hw file includesJohannes Berg1-1/+2
We can't get rid of everything yet due to the BT definitions that I'm not quite sure yet how to handle, but we can get rid of most unneeded includes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-24iwlwifi: move eeprom versions to HW filesJohannes Berg1-0/+5
The hardware files belong to the core PCI functionality, but the eeprom header file mixes higher-level functionality and the defines, so move out the specific defines and put them into the appropriate HW files instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-04-12iwlwifi: dynamically determine lib_opsJohannes Berg1-114/+2
Having the pointer to lib_ops in the config makes it impossible to split the driver into different modules. Determine the ops based on the device family enumeration to get rid of the direct pointer. Also move all the opmode specific code from the iwl-[1256]000.c files into a new file iwl-agn-devices.c so that the former only have configuration data now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: introduce device family enumJohannes Berg1-0/+4
This will later be used to dynamically bind the configuration data for DVM and MVM. For now, we can use it to get rid of the additional_nic_config() hook. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: move hw_params into privJohannes Berg1-9/+9
The hw_params are mostly values that are derived from the actual hardware config. As such, while it is possible that MVM will require similar ones, it makes more sense -- at least for now -- to put them into the DVM struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: move queue mapping out of transportJohannes Berg1-2/+0
The queue mapping is not only dynamic, it is also dependent on the uCode, as we can already see today with the dual-mode and non-dual-mode being different. Move the queue mapping out of the transport layer and let the higher layer manage it. Part of the transport configuration is how to set up the queues. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10iwlwifi: remove iq_invert config paramJohannes Berg1-11/+6
This is used only by 2000 class devices, but they all use it so remove the configuration parameter and hard-code the programming. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-09iwlwifi: fix the delta for remove max_txq_num patchWey-Yi Guy1-2/+0
BIg portion of "iwlwifi: remove max_txq_num from hw_params" was missing during merge, here is the fix for it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: remove unused max_nrg_cck from sensitivity and constifyJohannes Berg1-2/+1
The sensitivity parameters are never modified, so they should be const. Also remove the unused max_nrg_cck value to save some space. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: make EEPROM enhanced TX power a boolJohannes Berg1-2/+2
There's no need to carry around the function pointer when a boolean indicating that the EEPROM stores enhanced TX power information is sufficient. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-08iwlwifi: remove BT handlers from lib_opsJohannes Berg1-3/+0
There's no need to have operations for these as they simply depend on whether the device has built-in bluetooth, so just duplicate the information already there (whether bt_params is present or not). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: constify remaining config dataJohannes Berg1-4/+4
The HW configuration settings base_params, ht_params and bt_params all should be const, make it so. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: remove num_of_queues module parameterJohannes Berg1-5/+0
This is a hardware parameter, so it shouldn't be configurable by the user. Users can disable aggregation (which is the only thing affected) with 11n_disable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: make config constJohannes Berg1-6/+6
Writing to the global config structures is always wrong. To protect against such mistakes in the future, mark them const. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: use valid TX/RX antenna from hw_paramsJohannes Berg1-4/+3
It's not really a good idea to write to the global static configuration. Use the valid TX/RX antenna information only from the HW params struct except in the case where the values from the config are used to override the values from the EEPROM. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-17iwlwifi: SRAM size moves from hw_params to cfgEmmanuel Grumbach1-2/+8
This will allow to set the hw_params after we fetch the uCode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: iwl_set_hw_params returns always 0Emmanuel Grumbach1-3/+1
Remove the return value. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-03iwlwifi: move bcast_sta_id init to common routineDon Fry1-2/+0
There is nothing device specific in the initialization of the bcast_sta_id so move it to the common inititalization routine. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-03iwlwifi: give trans to all the read / write functionsEmmanuel Grumbach1-1/+1
From now on, the transport layer in charge of providing access to the device. So change all the driver to give a pointer to the transport to all the low level functions that actually access the device. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-01-07iwlwifi: update CopyrightWey-Yi Guy1-1/+1
Update Copyright to 2012 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: Add official names for new devicesDon Fry1-6/+6
Replace the engineering names with the marketing names for the new devices. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-12-16iwlwifi: move iwl_cfg from iwl_priv to iwl_sharedDon Fry1-8/+8
Move the configuration pointer from the upper level iwl_priv to the lower level iwl_shared structure, with associated code fixes. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-11-28iwlagn: remove calibration knowledgeJohannes Berg1-14/+0
The init microcode knows very well which calibrations are required and sends us results for those that are. Consequently, we can just send all of those to the RT uCode again. The problem with having the driver know about this is that it is a uCode feature, not a hardware feature so the config is completely unsuitable. The only thing we need to check is whether the device needs crystal calibration or not, add a new parameter to the configuration for that. This makes new uCode work on 6000 series devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11iwlwifi: remove un-supported SKUsWey-Yi Guy1-20/+0
BG only SKUs are no longer supported by 2000 and 1x5 series. Remove it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: move iwl_enable_rfkill_int and kill iwl-helpers.hEmmanuel Grumbach1-1/+0
Move iwl_enable_rfkill_int to iwl-core.h, and remove the empty iwl-helpers.h Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: remove 6000 hw headerJohannes Berg1-1/+0
The constants can be moved together with the similar ones for other devices and we can then remove the file. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: merge station management functionsWey-Yi Guy1-1/+0
After driver split, no need to separate station management functions in two files, merge it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: Add "_d" sku to 105 series of devicesWey-Yi Guy1-0/+6
Add additional sku to 105 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: kill hw_params.max_stationsEmmanuel Grumbach1-1/+0
Not needed since driver split. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20iwlagn: add support for v2 of temperature offset calibrationWey-Yi Guy1-0/+4
For 2000 series of NICs, version 2 of temperature offset calibration should be used. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20iwlagn: rename iwl-pci.h to iwl-cfg.hJohannes Berg1-1/+1
There's nothing PCI(E) specific in this file. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19iwlagn: replace beacon_time_fsf_bits variable with #defineDon Fry1-2/+0
All devices use the same value for beacon_time_tsf_bits. Use the #define Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19iwlagn: simplify chain_noise_num_beacons indirectionFry, Donald H1-2/+0
chain_noise_num_beacons is set and never changes. Use the #define rather than 3 levels of indirection. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19iwlagn: fix modinfo display for 135 ucode.Fry, Donald H1-1/+1
The modinfo report for 135 ucode is iwlwifi-135-IWL135_UCODE_API_MAX.ucode Change to show the value of the define: iwlwifi-135-6.ucode Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14iwlagn: enable 11n support for "_d" skuWey-Yi Guy1-0/+1
"_d" SKU is 11n enabled device Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: adding special "D" SKU for 2000 seriesWey-Yi Guy1-0/+5
One more sku for 2000 series with different Subsystem ID Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: iwl-pci doesn't include iwl-dev any moreEmmanuel Grumbach1-0/+1
Move all the iwlXXX_abgn_cfg forward declaration to a separate file so that iwl-pci.c doesn't need to include iwl-agn.h that includes all iwl-dev.h This allows to provide real encapsulation. Dereferencing iwl_priv in the bus layer will now lead to a compilation error. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: all function iwl-io.c receive iwl_busEmmanuel Grumbach1-1/+1
Which means that iwl-io.c doesn't need to include iwl-dev.h any more. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: remove unused parameters from hw_paramsEmmanuel Grumbach1-4/+0
Some of them weren't used at all, the others always had the same value since the driver split. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: hw_params moves to iwl_sharedEmmanuel Grumbach1-19/+19
Since it is used by all the layers, it needs to move to iwl_shared. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: introduce iwl-shared.hEmmanuel Grumbach1-0/+1
It will hold declaration of functions and forward declaration of struct that are used by several layers. This will allow modules not to include iwl_priv. iwl_bus and iwl_trans are still visible to all. All the layers share the module parameters, move the struct to iwl-shared.h. Also add all module parameters to iwl_mod_params instead of having them as global static. This includes * debug_level * ant_coupling * bt_ch_announce * wanted_ucode_alternative Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29iwlagn: Rename iwlcore prefixWey-Yi Guy1-2/+2
There are number of functions with "iwlcore_" prefix which not feels right, rename those to "iwl_". No functional changes by making the renames. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09iwlagn: support v2 of enhanced sensitivity tableWey-Yi Guy1-0/+2
Add support for v2 of enhanced sensitivity table for 2000 series products Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09iwlagn: bump firmware API for some devicesJohannes Berg1-4/+14
We're working on improvements for the firmware for some devices, and need to bump the API for those since they won't be backward compatible completely (the earlier patch reserving queue 10 for P2P). Bump the API version to 6 for those devices but don't warn users of version 5 yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 14:39:32 +0300