summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath9k
AgeCommit message (Collapse)AuthorFilesLines
2008-12-26drivers/net/wireless/ath9k: fix sparse warnings: make symbols staticHannes Eder1-30/+32
Fix this sparse warnings: drivers/net/wireless/ath9k/eeprom.c:195:6: warning: symbol 'ath9k_fill_eeprom' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:463:5: warning: symbol 'ath9k_check_eeprom' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1219:6: warning: symbol 'ath9k_hw_set_def_power_per_rate_table' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1510:6: warning: symbol 'ath9k_hw_set_4k_power_per_rate_table' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2007:5: warning: symbol 'ath9k_set_txpower' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2106:6: warning: symbol 'ath9k_set_addac' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2543:6: warning: symbol 'ath9k_eeprom_set_board_values' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2606:5: warning: symbol 'ath9k_get_eeprom_antenna_cfg' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2622:4: warning: symbol 'ath9k_hw_get_4k_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2628:4: warning: symbol 'ath9k_hw_get_def_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2647:4: warning: symbol 'ath9k_get_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2790:5: warning: symbol 'ath9k_get_eeprom' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-19ath9k: Fixed RX decryption status reportingJouni Malinen1-14/+12
The RX code in ath9k uses sc_keymap to figure out whether a default key was used. However, the default key entries in sc_keymap were always set and as such, frames could have been claimed to be decrypted by hardware when they were not. This can cause problems especially with TKIP since mac80211 is validating the Michael MIC in the frame and this will result in MIC failure and potentially TKIP countermeasures if the frame was not decrypted correctly. Change key cache slot allocation to mark only the keys that really have been used in sc_keymap to avoid the issue. The key cache slot selection routines are now internally avoiding the slots that may be needed for TKIP group keys. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Fix key cache slot selection for splitmicJouni Malinen1-2/+2
ath_reserve_key_cache_slot() was obviously supposed to return an index to a free slot, not reserved one. This could have caused problems with hardware revisions that use splitmic. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Protect config() callback with a mutexSujith2-0/+6
This should fix the timeout issues seen when using wpa_supplicant. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Key cache allocation for AP modeJouni Malinen1-68/+132
Enhance allocation of key cache entries to support multiple pairwise keys to fix AP mode with more than one associated STA. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Fix a NULL pointer dereference in ath_rate_getJouni Malinen1-1/+2
It looks like mac80211 may try to send unicast frames to a STA that does not have a STA entry. We need to make sure that that is caught in the rate control code before dereferencing STA data. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Move rate control alg register/unregister to appropriate placeVasanthakumar Thiagarajan1-16/+14
This patch makes sure the rate control alg is registered/unregistered only once for this module. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Synchronize DMA transfer with CPU at right placeVasanthakumar Thiagarajan1-4/+10
This patch does pci_dma_sync_single_for_cpu() before accessing the header of the frame and queueing the same buffer into h/w. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Remove MAC header pad before reporting TX statusJouni Malinen1-0/+12
Remove the possible MAC header pad before reporting TX status to mac80211. This pad is hardware specific operation and should not be exposed outside the driver. This fixes the frame body in monitor interfaces that could be used to check on TX status for transmitted frames. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Fix TX status reporting for retries and MCS indexJouni Malinen1-1/+9
The count field in struct ieee80211_tx_rate does not include the final successful attempt, so only report retries here. Fix the struct ieee80211_tx_rate::idx field when MCS was used. It is supposed to be the MCS index, not an internal index to the rate control algorithm table. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Report HT rates in RX statusJouni Malinen1-35/+26
Fix and clean up the RX status reporting by getting rid of code that used internal rate tables and ratekbps calculation. The correct value is now reported with MCS index instead of the old mechanism that defaulted to using the highest legacy rate. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19ath9k: Do not use association state to update rate tableSujith1-2/+1
Now that HT information is made available to the driver through config() callback, the channel type can be calculated whenever setting the channel. Update the rate table accordingly with the new channel type. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19mac80211: Fix HT channel selectionSujith1-94/+29
HT management is done differently for AP and STA modes, unify to just the ->config() callback since HT is fundamentally a PHY property and cannot be per-BSS. Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote the channel type ( NO_HT, HT20, HT40+, HT40- ). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Do not remove header padding on RX from short framesJouni Malinen1-2/+10
The 802.11 header is only padded to 32-bit boundary when the frame has a non-zero length payload. In other words, control frames (e.g., ACK) do not have a padding and we should not try to remove it. This fixes monitor mode for short control frames. In addition, the hdrlen&3 use is described in more detail to make it easier to understand how the padding length is calculated. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Refactor struct ath_softcSujith5-267/+254
Split ath_softc into smaller structures for rx, tx and beacon handling. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: BH shouldn't be enabled when hardirqs are disabled.Senthil Balasubramanian1-2/+3
ath_tx_complete_buf uses a BH version of spinlock and so releasing the lock enables BH which is incorrect when called from sta_notify callback as MAC80211 disables hardirqs before the driver callback is called. As ath_tx_complete_buf is shared between user and softirq context using normal spinlock may not be appropriate. Though the proper fix would be to cleanup the context properly in the driver code, this would be an interim fix to avoid kernel warning. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: remove fragmentation workaround againJohannes Berg1-6/+0
Looking at the RC algorithm this is no longer necessary. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: avoid rx frames with corrupted descriptor.Senthil Balasubramanian2-2/+9
Setting RX_ABORT/RX_DIS after MAC reset and clearing RX_ABORT/RX_DIS after enbling RXE/RXDP to avoid rx frames with corrupted descriptor status. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Incorrect band enum causes invalid antenna configuration.Senthil Balasubramanian3-3/+8
It's a regression from the patch titled "ath9k: Use mac80211's band macros and remove enum hal_freq_band". MAC80211 band macros can't be mapped directly with our hal band enum. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Adding support for Atheros AR9285 chipset.Senthil Balasubramanian8-332/+1826
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Adding initvalues for Atheros AR9285 chipset.Senthil Balasubramanian1-0/+1363
This patch adds the initvalues required for AR9285 chipset. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Adding AR9285 chipset register information.Senthil Balasubramanian1-1/+108
Adding AR9285 register information. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Merge structures ath_atx, ath_node_aggr with ath_nodeSujith2-94/+72
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Remove remaining occurrences of CONFIG_SLOW_ANT_DIVSujith3-22/+2
Slow Antenna Diversity has been removed, these are remnants of the old code. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Add a debugfs file to show interrupt statisticsSujith3-0/+159
Location: ath9k/<phy>/interrupt Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Maintain rate table choice after associationSujith6-13/+12
A scan run after association would change sc_curmode which is used to get the current rate table. This patch fixes it by removing sc_curmode and setting the rate table in usage in cur_rate_table on association. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Fix bug in rate table managementSujith2-4/+6
The proper rate table wouldn't be used if a disassoc happens and a new attempt is made to associate using wpa_supplicant. This patch fixes it by storing the rate table to be used on association. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Disable staggered Beacon frame schedulingJouni Malinen1-1/+1
It looks like there are some issues in the current ath9k version as far as staggered Beacon frame scheduling is concerned. This results in Beacon frame timestamp being off by 25 milliseconds or so which can cause issues with multicast power save buffering in AP mode. Some client stations fail to receive multicast frames when there is this large an offset between TBTT and actual Beacon transmission time. Since ath9k does not yet support multiple BSSes anyway, the staggered Beacon frame scheduling is just increasing the number of interrupts at this point. The easiest fix for the timestamp offset is to disable staggered Beacon frames for now. We need to redesign beacon.c anyway when adding multi-BSS support with mac80211 since the existing code depends on different mechanism for Beacon frame transmission. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12ath9k: Free Beacon skbs in AP modeJouni Malinen1-0/+1
Fix a memory leak where AP mode did not free transmitted Beacon frame skbs. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Pat Erley <pat-lkml@erley.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Use GFP_ATOMIC when allocating TX private areaLuis R. Rodriguez1-2/+20
Using GFP_KERNEL was wrong and produces a 'scheduling while atomic' bug as we're in a tasklet. Also, check for proper return values now, in case allocation fails and be sure to stop the TX queue in case of memory issues but gaurantee the TX queue will eventually be woken up. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Check for pci_map_single() errorsLuis R. Rodriguez3-3/+53
pci_map_single() can fail so detect those errors with pci_dma_mapping_error() and deal with them accordingly. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05generic swap(): ath9k: rename swap() to swap_array()Wu Fengguang2-2/+2
In preparation for the introduction of a generic swap() macro. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Sujith Manoharan <Sujith.Manoharan@atheros.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Cc: Senthil Balasubramanian <senthilkumar@atheros.com> Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Choose correct ANI calibration periodSujith1-2/+3
ANI can't be turned on/off dynamically yet, but the calculation of the calibration period is wrong anyway. This patch fixes it. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Replace ath9k_opmode with nl80211_iftypeColin McCabe10-74/+81
This patch kills ath9k's ath9k_opmode enum by replacing it with nl80211_iftype. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Add a debugfs file for dumping DMA statusSujith6-74/+102
Debugfs file location: ath9k/<wiphy>/dma Contains values in DMA debug registers. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Add initial layout for an ath9k specific debugfs mechanismSujith3-8/+42
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Remove includes that are not neededSujith1-19/+0
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Add ATH9K_DEBUG configuration optionSujith5-17/+75
Make debugging configurable, and add a module parameter to give the debug mask. Add debug.c to hold all debug specific code. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Use cleaner debug masksSujith13-609/+429
Remove all the useless __func__ prefixes in debug messages, and replace the DPRINTF macro with a function. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Handle channel initialization for AP modeSujith2-24/+91
Hostapd now passes the HT parameters through the config() callback, use these to set the appropriate channel in AP mode. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-27Merge branch 'master' of ↵David S. Miller2-12/+22
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/hp-plus.c drivers/net/wireless/ath5k/base.c drivers/net/wireless/ath9k/recv.c net/wireless/reg.c
2008-11-26ath9k: Use proper TX channel width for setting channelsSujith4-69/+60
The TX channel width of the BSS can be obtained only after association. In all cases, default to HT20 if HT is enabled, and set chan width to HT40 only if the BSS supports it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Code scrubSujith8-1865/+1231
Merge core.c and base.c Remove Antenna Diversity (unused now). Remove unused chainmask handling code. Comment, indentation scrub. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Handle -ENOMEM on RX gracefullyLuis R. Rodriguez1-31/+26
We would get an oops on RX on -ENOMEM by passing NULL to the hardware on ath_rx_buf_link(). The oops would look something like this: ath_rx_tasklet+0x515/0x53b ath9k_tasklet+0x48 tasklet_action __do_softirq irq_exit do_IRQ RIP: ath_rx_buf_link+0x3a We correct this by handling the requeue directly on the ath_rx_tasklet() and trying to allocate an skb *prior* to sending up the last hardware processed skb. If we run out of memory this gauranteees we have skbs to work with while it simply drops new received frames. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Dont update rate control for every AMPDUVasanthakumar Thiagarajan3-1/+5
Update the rate control only with the tx status of first AMPDU of an aggregation. This patch fixes frequent drops in throughput. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use straightforward PCI routines to setup the TX buffer.Sujith1-16/+7
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Update TX trigger level on a FIFO underrun.Sujith1-1/+3
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Fix bug in deciphering channel flagsSujith2-7/+7
CHANNEL_CCK flag is set for all 2 Ghz channels, so IS_CHAN_CCK() would turn out to be true for all channles in that band. Use IS_CHAN_B() now, which checks the channel mode and not the channel flags. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Move TX completion routine to xmit.cSujith3-65/+56
Also, use a helper function to setup RC status data when processing completed TX descriptors. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use helpersSujith2-197/+194
Break down huge functions, use helper functions or macros instead. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 17:50:55 +0300