summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k
AgeCommit message (Collapse)AuthorFilesLines
2013-11-16Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-04Merge branch 'master' of ↵John W. Linville1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-18ath5k: fix regression in tx status processingFelix Fietkau1-3/+3
The regression was introduced in the following commit: 0967e01e8e713ed2982fb4eba8ba13794e9a6e89 "ath5k: make use of the new rate control API" ath5k_tx_frame_completed saves the intended per-rate retry counts before they are cleared by ieee80211_tx_info_clear_status, however at this point the information in info->status.rates is incomplete. This causes significant throughput degradation and excessive packet loss on links where high bit rates don't work properly. Move the copy from bf->rates a few lines up to ensure that the saved retry counts are updated, and that they are really cleared in info->status.rates after the call to ieee80211_tx_info_clear_status. Cc: stable@vger.kernel.org # 3.10+ Cc: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Cc: Benjamin Vahl <bvahl@net.t-labs.tu-berlin.de> Reported-by: Ben West <ben@gowasabi.net> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14treewide: fix "usefull" typoMichael Opdenacker1-1/+1
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-26wireless: ath5k: use dev_get_platdata()Jingoo Han1-9/+6
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26ath5k: debugfs: NULL-terminate stringsDjalal Harouni1-6/+18
Avoid processing garbage data by NULL terminating the strings. Signed-off-by: Djalal Harouni <tixxdz@opendz.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath5k: enable support for 5 MHz and 10 MHz channelsSimon Wunderlich4-5/+25
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath5k: set 5/10 MHz supported channels and fix durationSimon Wunderlich3-9/+42
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-16ath5k: report 5/10 MHz channelsSimon Wunderlich1-0/+10
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-19ath5k: fix extra set bit in multicast maskBob Copeland1-1/+1
Bit 32 was always set which looks to have been accidental, according to git history. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-21Merge branch 'master' of ↵John W. Linville3-21/+74
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: net/wireless/nl80211.c
2013-06-12ath5k: make use of the new rate control APIThomas Huehn3-21/+74
This patch enabels ath5k to use the new rate table to lookup each mrr rate and retry information per packet. Signed-off-by: Benjamin Vahl <bvahl@net.t-labs.tu-berlin.de> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-28net: wireless: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03ath5k: do not reschedule tx_complete_work on stopStanislaw Gruszka1-0/+5
This patch claim to fix "WARNING: at net/mac80211/util.c:599 ieee80211_can_queue_work.isra.7+0x30/0x40", which was reported at: https://bugzilla.redhat.com/show_bug.cgi?id=922295 We use ATH_STAT_STARTED flag to disallow to perform ath5k_tx_complete_poll_work() code, hence reschedule ah->tx_complete_work, when we stop device. This flag was defined in ath5k code, but it was not used. I didn't get feedback if the fix works, so patch is compile only tested. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-12ath5k: use more idiomatic tracing include styleJohannes Berg2-1/+2
Pretty much everywhere that uses a trace definition header that's not in include/trace/events/ uses the make system for the include path rather than putting it into the sources, so do that in ath5k as well. This came up during backporting work (where this is required), but since all other drivers do it this way upstream it seemed applicable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10Merge branch 'for-john' of ↵John W. Linville2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/ath/carl9170/debug.c drivers/net/wireless/ath/carl9170/main.c net/mac80211/ieee80211_i.h
2013-03-25mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chanKarl Beldan2-3/+3
Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-07ath5k: cleanup channel to eprom_mode functionJiri Slaby5-26/+10
Stop returning negative values from ath5k_eeprom_mode_from_channel. Yell loudly about that case in that function instead and return the default/zero/mode A. This cleans up the callers, but needs to pass ah down to ath5k_eeprom_mode_from_channel for ATH5K_WARN. For that purpose we also need the declaration to be moved to ath5k.h. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08NET: ath5k, check ath5k_eeprom_mode_from_channel retvalJiri Slaby2-0/+6
It can, if invalid argument given, return a negative value. In that case we would access arrays out-of-bounds and such. Check the value and yell loudly if that happened as it would be a bug in the implementation. (Instead of silently corrupting memory.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-14wireless: make the reg_notifier() voidLuis R. Rodriguez1-2/+3
The reg_notifier()'s return value need not be checked as it is only supposed to do post regulatory work and that should never fail. Any behaviour to regulatory that needs to be considered before cfg80211 does work to a driver should be specified by using the already existing flags, the reg_notifier() just does post processing should it find it needs to. Also make lbs_reg_notifier static. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [move lbs_reg_notifier to not break compile] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-12ath5k: RX timestamp is reported at end of frameThomas Pedersen1-12/+1
This is true for at least AR5213, and shouldn't be different for other ath5k PHYs. Tested on AR2413 and AR5414. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Tested-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11ath5k: fix tx path skb leaksFelix Fietkau2-3/+3
ieee80211_free_txskb() needs to be used instead of dev_kfree_skb_any for tx packets passed to the driver from mac80211 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-07ath5k: remove __dev* attributesBill Pemberton3-6/+6
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Cc: linux-wireless@vger.kernel.org Cc: ath5k-devel@lists.ath5k.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-30wireless: allow Atheros card to not depend on ath.koVladimir Kondratiev1-0/+1
There are 2 different things: - sub-menu for "Atheros Wireless cards" family - module ath.ko with common Atheros code Until now, they both used to depend on the same Kconfig variable ATH_COMMON. Thus, being "Atheros card" and "depending on ath.ko" was the same. To allow module to belong to the "Atheros Wireless cards" family but not use ath.ko, 2 conditions above need to be separated. So, this patch introduce new Kconfig variable ATH_CARDS for belonging to the "Atheros Wireless Cards" family; while ATH_COMMON becomes hidden variable to express dependency on common Atheros code in ath.ko. Modules that depend on this common code now express it by setting ATH_COMMON. Right now, ath6kl do not depend on common code and thus do not set ATH_COMMON. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21Merge branch 'for-john' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-11-16ath5k: precedence error in ath5k_hw_nic_wakeup()Dan Carpenter1-3/+3
'|' has higher precedence than ?:. Since AR5K_PHY_TURBO_MODE is 0x1 and "AR5K_PHY_TURBO_MODE | (ah->ah_radio == AR5K_RF2425)" is true then we always set turbo to zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16ath5k: Use module_platform_driver macro for ahb.cSyam Sidhardhan1-14/+1
Simplify the code by make use of module_platform_driver macro. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-14mac80211: support RX_FLAG_MACTIME_ENDThomas Pedersen1-1/+1
Allow drivers to indicate their mactime is at RX completion and adjust for this in mac80211. Also rename the existing RX_FLAG_MACTIME_MPDU to RX_FLAG_MACTIME_START to clarify its intent. Based on similar code by Johannes Berg. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> [fix docs, atheros drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-09mac80211: clarify interface iteration and make it configurableJohannes Berg2-6/+9
During hardware restart, all interfaces are iterated even though they haven't been re-added to the driver, document this behaviour. The same also happens during resume, which is even more confusing since all of the interfaces were previously removed from the driver. Make this optional so drivers relying on the current behaviour can still use it, but to let drivers that don't want this behaviour disable it. Also convert all API users, keeping the old semantics except in hwsim, where the new normal ones are desired. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-08ath5k: fix potential NULL pointer dereference in ath5k_beacon_update()Wei Yongjun1-1/+2
The dereference should be moved below the NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-25ath5k: add missing breaks in ath5k_hw_set_spur_mitigation_filterJohn W. Linville1-0/+2
https://bugzilla.kernel.org/show_bug.cgi?id=47681 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath5k: disable HW crypto in management frameChun-Yeow Yeoh2-0/+4
Hardware support for MFP is not available in ath5k. Thus, this implementation allows the mac80211 stack to do the actuall crypto operation. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24Merge branch 'for-john' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-09-10mac80211: add key flag for management keysJohannes Berg1-1/+1
Mark keys that might be used to receive management frames so drivers can fall back on software crypto for them if they don't support hardware offload. As the new flag is only set correctly for RX keys and the existing IEEE80211_KEY_FLAG_SW_MGMT flag can only affect TX, also rename the latter to IEEE80211_KEY_FLAG_SW_MGMT_TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-07Merge branch 'master' of ↵John W. Linville4-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-08-22Merge branch 'for-john' of ↵John W. Linville1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/mac80211_hwsim.c
2012-08-21ath5k: fix wrong max power per rate eeprom reads for 802.11aThomas Huehn2-1/+2
This patch reduces the per rate target power eeprom reads for AR5K_EEPROM_MODE_11A from 10 to 8, as there are only 8 valid power curve entries on the eeprom. The former 10 reads lead to equal max power limits per rate and this causes an increasing distortion for all rates above 24 MBit and leads to a needless poor performance in 802.11a mode. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-13ath5k: fix spin_lock_irqsave/spin_lock_bh nesting in meshBob Copeland2-7/+4
Lockdep found an inconsistent lock state when joining a mesh with ath5k. The problem is that ath5k takes the lock for its beacon state, ah->block, with spin_lock_irqsave(), while mesh internally takes the sync_offset_lock with spin_lock_bh() in mesh_sync_offset_adjust_tbtt(), which in turn is called under ah->block. This could deadlock if the beacon tasklet was run on the processor that held the beacon lock during the do_softirq() in spin_unlock_bh(). We probably shouldn't hold the lock around the callbacks, but the easiest fix is to switch to spin_lock_bh for ah->block: it doesn't need interrupts disabled anyway as the data in question is only accessed in softirq or process context. Fixes the following lockdep warning: [ 446.892304] WARNING: at kernel/softirq.c:159 _local_bh_enable_ip+0x38/0xa6() [ 446.892306] Hardware name: MacBook1,1 [ 446.892309] Modules linked in: tcp_lp fuse sunrpc cpufreq_ondemand acpi_cpufreq mperf ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 ip6table_filter nf_defrag_ipv4 xt_state nf_conntrack ip6_tables ext2 arc4 btusb bluetooth snd_hda_codec_idt snd_hda_intel carl9170 snd_hda_codec coretemp joydev ath5k snd_hwdep snd_seq isight_firmware ath snd_seq_device snd_pcm applesmc appletouch mac80211 input_polldev snd_timer microcode cfg80211 snd lpc_ich pcspkr i2c_i801 mfd_core soundcore rfkill snd_page_alloc sky2 tpm_infineon virtio_net kvm_intel kvm i915 drm_kms_helper drm i2c_algo_bit i2c_core video [ 446.892385] Pid: 1892, comm: iw Not tainted 3.6.0-rc1-wl+ #296 [ 446.892387] Call Trace: [ 446.892394] [<c0432958>] warn_slowpath_common+0x7c/0x91 [ 446.892398] [<c04399d7>] ? _local_bh_enable_ip+0x38/0xa6 [ 446.892403] [<c04399d7>] ? _local_bh_enable_ip+0x38/0xa6 [ 446.892459] [<f7f9ae3b>] ? mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 446.892464] [<c043298f>] warn_slowpath_null+0x22/0x24 [ 446.892468] [<c04399d7>] _local_bh_enable_ip+0x38/0xa6 [ 446.892473] [<c0439a52>] local_bh_enable_ip+0xd/0xf [ 446.892479] [<c088004f>] _raw_spin_unlock_bh+0x34/0x37 [ 446.892527] [<f7f9ae3b>] mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 446.892569] [<f7f7650f>] ieee80211_beacon_get_tim+0x28f/0x4e0 [mac80211] [ 446.892575] [<c047ceeb>] ? trace_hardirqs_on_caller+0x10e/0x13f [ 446.892591] [<f7fdc541>] ath5k_beacon_update+0x40/0x26b [ath5k] [ 446.892597] [<c047ad67>] ? lock_acquired+0x1f5/0x21e [ 446.892612] [<f7fdf9fb>] ? ath5k_bss_info_changed+0x167/0x1b2 [ath5k] [ 446.892617] [<c087f9ea>] ? _raw_spin_lock_irqsave+0x78/0x82 [ 446.892632] [<f7fdf9fb>] ? ath5k_bss_info_changed+0x167/0x1b2 [ath5k] [ 446.892647] [<f7fdfa09>] ath5k_bss_info_changed+0x175/0x1b2 [ath5k] [ 446.892651] [<c0479dd4>] ? lock_is_held+0x73/0x7b [ 446.892662] [<c0458fd5>] ? __might_sleep+0xa7/0x17a [ 446.892698] [<f7f5d8f7>] ieee80211_bss_info_change_notify+0x1ed/0x21a [mac80211] [ 446.892703] [<c0449875>] ? queue_work+0x24/0x32 [ 446.892718] [<f7fdf894>] ? ath5k_configure_filter+0x163/0x163 [ath5k] [ 446.892766] [<f7f95fa4>] ieee80211_start_mesh+0xb9/0xbd [mac80211] [ 446.892806] [<f7f6e610>] ieee80211_join_mesh+0x10c/0x116 [mac80211] [ 446.892834] [<f7a96b90>] __cfg80211_join_mesh+0x176/0x1b3 [cfg80211] [ 446.892855] [<f7a96c1c>] cfg80211_join_mesh+0x4f/0x6a [cfg80211] [ 446.892875] [<f7a89891>] nl80211_join_mesh+0x1de/0x1ed [cfg80211] [ 446.892908] [<f7a8db99>] ? nl80211_set_wiphy+0x4cf/0x4cf [cfg80211] [ 446.892919] [<c07cfa36>] genl_rcv_msg+0x1d5/0x1f3 [ 446.892940] [<c07cf861>] ? genl_rcv+0x25/0x25 [ 446.892946] [<c07cf009>] netlink_rcv_skb+0x37/0x78 [ 446.892950] [<c07cf85a>] genl_rcv+0x1e/0x25 [ 446.892955] [<c07cebf3>] netlink_unicast+0xc3/0x12d [ 446.892959] [<c07cee46>] netlink_sendmsg+0x1e9/0x213 [ 446.892966] [<c079f282>] sock_sendmsg+0x79/0x96 [ 446.892972] [<c04eb90d>] ? might_fault+0x9d/0xa3 [ 446.892978] [<c07a81d8>] ? copy_from_user+0x8/0xa [ 446.892983] [<c07a852c>] ? verify_iovec+0x43/0x77 [ 446.892987] [<c079f4d8>] __sys_sendmsg+0x180/0x215 [ 446.892993] [<c045f107>] ? sched_clock_cpu+0x134/0x144 [ 446.892997] [<c047992f>] ? trace_hardirqs_off+0xb/0xd [ 446.893002] [<c047bf88>] ? __lock_acquire+0x46b/0xb6e [ 446.893006] [<c047992f>] ? trace_hardirqs_off+0xb/0xd [ 446.893010] [<c045f149>] ? local_clock+0x32/0x49 [ 446.893015] [<c0479ec1>] ? lock_release_holdtime.part.9+0x4b/0x51 [ 446.893020] [<c0479dd4>] ? lock_is_held+0x73/0x7b [ 446.893025] [<c050d127>] ? fcheck_files+0x97/0xcd [ 446.893029] [<c050d4df>] ? fget_light+0x2d/0x81 [ 446.893034] [<c07a01f3>] sys_sendmsg+0x3b/0x52 [ 446.893038] [<c07a07b4>] sys_socketcall+0x238/0x2a2 [ 446.893044] [<c0885edf>] sysenter_do_call+0x12/0x38 [ 446.893047] ---[ end trace a9af5998f929270f ]--- [ 447.627222] [ 447.627232] ================================= [ 447.627237] [ INFO: inconsistent lock state ] [ 447.627244] 3.6.0-rc1-wl+ #296 Tainted: G W [ 447.627248] --------------------------------- [ 447.627253] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 447.627260] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 447.627264] (&(&ah->block)->rlock){+.?...}, at: [<f7fdd2d1>] ath5k_tasklet_beacon+0x91/0xa7 [ath5k] [ 447.627299] {SOFTIRQ-ON-W} state was registered at: [ 447.627304] [<c047cdbf>] mark_held_locks+0x59/0x77 [ 447.627316] [<c047ceeb>] trace_hardirqs_on_caller+0x10e/0x13f [ 447.627324] [<c047cf27>] trace_hardirqs_on+0xb/0xd [ 447.627332] [<c0439a3d>] _local_bh_enable_ip+0x9e/0xa6 [ 447.627342] [<c0439a52>] local_bh_enable_ip+0xd/0xf [ 447.627349] [<c088004f>] _raw_spin_unlock_bh+0x34/0x37 [ 447.627359] [<f7f9ae3b>] mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 447.627451] [<f7f7650f>] ieee80211_beacon_get_tim+0x28f/0x4e0 [mac80211] [ 447.627526] [<f7fdc541>] ath5k_beacon_update+0x40/0x26b [ath5k] [ 447.627547] [<f7fdfa09>] ath5k_bss_info_changed+0x175/0x1b2 [ath5k] [ 447.627569] [<f7f5d8f7>] ieee80211_bss_info_change_notify+0x1ed/0x21a [mac80211] [ 447.627628] [<f7f95fa4>] ieee80211_start_mesh+0xb9/0xbd [mac80211] [ 447.627712] [<f7f6e610>] ieee80211_join_mesh+0x10c/0x116 [mac80211] [ 447.627782] [<f7a96b90>] __cfg80211_join_mesh+0x176/0x1b3 [cfg80211] [ 447.627816] [<f7a96c1c>] cfg80211_join_mesh+0x4f/0x6a [cfg80211] [ 447.627845] [<f7a89891>] nl80211_join_mesh+0x1de/0x1ed [cfg80211] [ 447.627872] [<c07cfa36>] genl_rcv_msg+0x1d5/0x1f3 [ 447.627881] [<c07cf009>] netlink_rcv_skb+0x37/0x78 [ 447.627891] [<c07cf85a>] genl_rcv+0x1e/0x25 [ 447.627898] [<c07cebf3>] netlink_unicast+0xc3/0x12d [ 447.627907] [<c07cee46>] netlink_sendmsg+0x1e9/0x213 [ 447.627915] [<c079f282>] sock_sendmsg+0x79/0x96 [ 447.627926] [<c079f4d8>] __sys_sendmsg+0x180/0x215 [ 447.627934] [<c07a01f3>] sys_sendmsg+0x3b/0x52 [ 447.627941] [<c07a07b4>] sys_socketcall+0x238/0x2a2 [ 447.627949] [<c0885edf>] sysenter_do_call+0x12/0x38 [ 447.627959] irq event stamp: 1929200 [ 447.627963] hardirqs last enabled at (1929200): [<c043a0e9>] tasklet_hi_action+0x3e/0xbf [ 447.627972] hardirqs last disabled at (1929199): [<c043a0c0>] tasklet_hi_action+0x15/0xbf [ 447.627981] softirqs last enabled at (1929196): [<c043999d>] _local_bh_enable+0x12/0x14 [ 447.627989] softirqs last disabled at (1929197): [<c040443b>] do_softirq+0x63/0xb8 [ 447.627999] [ 447.627999] other info that might help us debug this: [ 447.628004] Possible unsafe locking scenario: [ 447.628004] [ 447.628009] CPU0 [ 447.628012] ---- [ 447.628016] lock(&(&ah->block)->rlock); [ 447.628023] <Interrupt> [ 447.628027] lock(&(&ah->block)->rlock); [ 447.628034] [ 447.628034] *** DEADLOCK *** Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Put power_level where it belongs and rename itNick Kossifidis4-8/+17
Put power_level to ah_txpower struct with the rest tx power infos and also rename it to txp_requested to make more sense. v2 make sure we don't memset it to zero on reset Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Preserve tx power level requested from above on phy_initNick Kossifidis1-2/+2
By using cur_pwr on phy_init we re-use the power level previously set by the driver, not the one we got from above. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Fix range scaling when setting rate power tableNick Kossifidis1-3/+7
rates[i] is unsigned but txp_offset can be negative for newer parts with PDADC table. We cover the case when rates[i] + txp_offset > 63 but we must also cover the case when its < 0 or else rates[i] will overflow. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10ath5k: Use correct value for min_pwr and cur_pwrNick Kossifidis1-5/+14
Make sure we don't store the table offsets for min and cur power levels, store the 0.25dB values instead. This way we don't clamp the tx power level to max (because now cur_pwr holds the 0.25dB value, not the table offset) after re-using cur_pwr on reset. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-31mac80211: move TX station pointer and restructure TXThomas Huehn1-1/+2
Remove the control.sta pointer from ieee80211_tx_info to free up sufficient space in the TX skb control buffer for the upcoming Transmit Power Control (TPC). Instead, the pointer is now on the stack in a new control struct that is passed as a function parameter to the drivers' tx method. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [reworded commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-17ath5k: fix txop limit handlingFelix Fietkau1-1/+1
Same as the recent ath9k fix Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11ath5k: replace modparam_all_channels with CONFIG_ATH5K_TEST_CHANNELSLuis R. Rodriguez2-7/+18
This stashes away this feature from standard kernel builds. Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-19ath5k: remove _bh from inner locksBob Copeland1-2/+2
spin_unlock_bh(&txq->lock) already disables softirqs so we don't want to do it here. Fixes smatch warnings: drivers/net/wireless/ath/ath5k/base.c:1048 ath5k_drain_tx_buffs() error: double lock 'bottom_half:' drivers/net/wireless/ath/ath5k/base.c:1056 ath5k_drain_tx_buffs() error: double unlock 'bottom_half:' Reported-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29ath5k: add possible wiphy interface combinationsFelix Fietkau1-0/+19
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
2012-05-11drivers/net: Convert compare_ether_addr to ether_addr_equalJoe Perches1-3/+3
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Conflicts: drivers/net/ethernet/intel/e1000e/param.c drivers/net/wireless/iwlwifi/iwl-agn-rx.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c drivers/net/wireless/iwlwifi/iwl-trans.h Resolved the iwlwifi conflict with mainline using 3-way diff posted by John Linville and Stephen Rothwell. In 'net' we added a bug fix to make iwlwifi report a more accurate skb->truesize but this conflicted with RX path changes that happened meanwhile in net-next. In e1000e a conflict arose in the validation code for settings of adapter->itr. 'net-next' had more sophisticated logic so that logic was used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-27ath5k: add missing iounmap to AHB probe removalJonathan Bither1-0/+1
When our driver device is removed on the AHB bus, our IO memory is never unmapped. Signed-off-by: Jonathan Bither <jonbither@gmail.com> Reviewed-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-23 00:41:37 +0300