summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k/base.h
AgeCommit message (Collapse)AuthorFilesLines
2013-08-16ath5k: enable support for 5 MHz and 10 MHz channelsSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12ath5k: make use of the new rate control APIThomas Huehn1-6/+8
This patch enabels ath5k to use the new rate table to lookup each mrr rate and retry information per packet. Signed-off-by: Benjamin Vahl <bvahl@net.t-labs.tu-berlin.de> Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath5k: remove last references to "softc"Pavel Roskin1-2/+2
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath5k: clean up base.h and its usePavel Roskin1-11/+42
Remove unnecessary includes from base.h. Add includes to other files as necessary. Don't include base.h unless needed. Move declarations for functions in base.c from ath5k.h to base.h. Use a better named define to protect base.h against double inclusion. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ath5k: remove unused and write-only structures and fieldsPavel Roskin1-1/+0
struct ath5k_avg_val is unused. In struct ath5k_hw, lladdr, ah_radar and ah_mac_revision are write-only, rxbufsize is unused, ah_phy is write-only and referenced by unused macros. In struct ath5k_vif, lladdr is write-only. Remove AR5K_TUNE_RADAR_ALERT, which has no effect. Signed-off-by: Pavel Roskin <proski@gnu.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08ath5k: remove wireless extensions inclusionsJohannes Berg1-1/+0
linux/wireless.h and net/iw_handler.h headers are for wireless extensions only, so mac80211 drivers shouldn't be including them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-22ath5k: remove ath5k_hw_get_capability(), don't use VEOL on AR5210Pavel Roskin1-4/+5
There are only two capabilities we need, and both are trivial to find. ath5k_hw_hasbssidmask() is true on AR5212, but not on AR5210 or AR5211. ath5k_hw_hasveol() is true on AR5211 and AR5212, but not on AR5210, according to the HAL source. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20ath5k: merge ath5k_hw and ath5k_softcPavel Roskin1-196/+0
Both ath5k_hw and ath5k_softc represent one instance of the hardware. This duplication is historical and is not needed anymore. Keep the name "ath5k_hw" for the merged structure and "ah" for the variable pointing to it. "ath5k_hw" is shorter than "ath5k_softc", more descriptive and more widely used. Put the combined structure to ath5k.h where the old ath5k_softc used to be. Move some code from base.h to ath5k.h as needed. Remove memory allocation for struct ath5k_hw and the corresponding error handling. Merge iobase and ah_iobase fields. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: fix typos, bad comment formatting and GHz in place of MHzPavel Roskin1-2/+2
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: fix formatting errors found by checkpatch.plPavel Roskin1-2/+2
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: fix misplaced or extraneous braces found by checkpatch.plPavel Roskin1-2/+1
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: replace spaces with tabs as suggested by checkpatch.plPavel Roskin1-1/+1
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath5k: disable 5 GHz support for the dualband PHY chip on dual-radio AR5312Felix Fietkau1-1/+2
There are two variants of AR5312 dual-band devices, one single-radio and the other one dual-radio. On the dual-radio board, the first MAC only supports 5 GHz, even though it has a dual-band PHY. The 2.4 GHz part of this phy is used in pass-through mode, connecting the second MAC with the second PHY. Disable 2.4 GHz for the first MAC on an AR5312, but only if the board configuration indicates a dual-radio device. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: reduce interrupt load caused by rx/tx interruptsFelix Fietkau1-0/+4
While the rx/tx tasklet is pending, new unnecessary interrupts may arrive. Decrease the load by temporarily disabling the interrupts until the tasklet has completed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-11ath5k: implement ieee80211_ops->{get,set}_ringparamJohn W. Linville1-0/+1
set_ringparam only allows changes to tx ring at this time. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-07ath5k: Put hardware in PROMISC mode if there is more than 1 stations.Ben Greear1-0/+13
It seems ath5k has issues receiving broadcast packets (ARPs) when using multiple STA interfaces associated with multiple APs. This patch ensures the NIC is always in PROMISC mode if there are more than 1 stations associated. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21ath5k: Remove redundant sc->curbandBruno Randolf1-2/+0
Remove sc->curband because the band is already stored in the current channel. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21ath5k: Remove unused sc->curmodeBruno Randolf1-1/+0
sc->curmode is set but never used. Remove it and the helper function. Also the ath5k_rate_update which is refered to in the comment does not exist (any more?) so we don't need to setup the band in that place. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath5k: Fix surveyBruno Randolf1-0/+2
The old survey implementation was broken and returned nonsense data. Clear cycle counters and survey data on reset. Since the cycle counters easily overflow it's better to keep a local version of collected survey data (in ms resolution, instead of clockrate) and update this every time survey is retrieved. If survey is retrieved often enough to avoid cycle counter overflows this works fine, otherwise we could update survey more often, like ath9k does. Still only the survey for the current channel is kept. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath5k: Introduce ath5k_init_softc function as in ath9kFelix Fietkau1-0/+1
Split pci initialization into hardware specific functions and softc structure initialization. Make function naming similar to ones ath9k. Introduce ath_bus_opts in ath5k for later AHB bus integration. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath5k: Use Generic DMA for later support of AHB bus.Felix Fietkau1-1/+3
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05ath5k: Print rx/tx bytes in debugfsBen Greear1-0/+7
This adds counters for tx and rx bytes, including any errored packets as well as all wireless headers. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05ath5k: Allow ath5k to support virtual STA and AP interfaces.Ben Greear1-4/+15
Support up to 4 virtual APs and as many virtual STA interfaces as desired. This patch is ported forward from a patch that Patrick McHardy did for me against 2.6.31. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21ath5k: Count how many times a queue got stuckBruno Randolf1-0/+1
Add a counter to show how many times a queue got stuck in the debugfs queue file. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21ath5k: Add watchdog for stuck TX queuesBruno Randolf1-0/+3
Since we do not know any better solution to the problem that TX queues can get stuck, this adds a timer-based watchdog, which will check for stuck queues and reset the hardware if necessary. Ported from ath9k commit 164ace38536849966ffa377b1b1132993a5a375d. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-21ath5k: Use four hardware queuesBruno Randolf1-1/+4
Prepare ath5k for WME by using four hardware queues. The way we set up our queues matches the mac80211 queue priority 1:1, so we don't have to do any mapping for queue numbers. Every queue uses 50 of the total 200 available transmit buffers, so the DMA memory usage does not increase with this patch, but it might be good to fine-tune the number of buffers per queue later (depending on the CPU speed and load, and the speed of the medium access, it might not be big enough). Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-14ath5k: clean up rxlink handlingBruno Randolf1-0/+1
There were a few places where the sc->rxlink pointer was set to NULL "just in case". This helps nothing - quite to the contrary it is problematic since it can create self-linked rx descriptors in the middle of the list of receive buffers. Here is an example how this could happen (thanks Bob!): cpu 0: cpu 1: ath5k_rx_stop ath5k_tasklet_rx sc->rxlink = NULL; /* just in case */ // following doesn't link used // buffer to prev. ath5k_rxbuf_setup() In the case of ath5k_rx_stop() and ath5k_stop_locked() buffers/descriptors are not changed so rxlink should not be changed as well. In ath5k_intr() we seem to try to work around a hardware bug, as the comment (which is copied 1:1 from the HAL) suggests. I don't see how this could help. Also the HAL does not set rxlink in this case (So where does this code come from? It has been there since the first import of ath5k). Changed to just increment a statistics counter. After this patch rxlink is only set to NULL before we initialize rx descriptors and updated when the descriptors are linked together. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-14ath5k: move reset to mac80211 workqueueBob Copeland1-1/+2
We currently trigger a reset via a tasklet when certain error conditions are detected so that the card will (eventually) restart. Unfortunately this makes locking complicated since reset can also be called in process context (e.g. for channel change). Currently nothing protects against concurrent resets, which can be the source of corruption bugs. Reset takes too long to spinlock the whole thing, so this patch moves deferred resets into the mac80211 workqueue to enable use of sc->lock mutex. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-14ath5k: treat RXORN as non-fatalBruno Randolf1-0/+1
We get RXORN interrupts when all receive buffers are full. This is not necessarily a fatal situation. It can also happen when the bus is busy or the CPU is not fast enough to process all frames. Older chipsets apparently need a reset to come out of this situration, but on newer chips we can treat RXORN like RX, as going thru a full reset does more harm than good, there. The exact chip revisions which need a reset are unknown - this guess AR5K_SREV_AR5212 ("venice") is copied from the HAL. Inspired by openwrt 413-rxorn.patch: "treat rxorn like rx, reset after rxorn seems to do more harm than good" Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07ath5k: Adaptive Noise Immunity (ANI) ImplementationBruno Randolf1-0/+6
This is an Adaptive Noise Imunity (ANI) implementation for ath5k. I have looked at both ath9k and HAL sources (they are nearly the same), and even though i have implemented some things differently, the basic algorithm is practically the same, for now. I hope that this can serve as a clean start to improve the algorithm later. This also adds a possibility to manually control ANI settings, right now only thru a debugfs file: * set lowest sensitivity (=highest noise immunity): echo sens-low > /sys/kernel/debug/ath5k/phy0/ani * set highest sensitivity (=lowest noise immunity): echo sens-high > /sys/kernel/debug/ath5k/phy0/ani * automatically control immunity (default): echo ani-on > /sys/kernel/debug/ath5k/phy0/ani * to see the parameters in use and watch them change: cat /sys/kernel/debug/ath5k/phy0/ani Manually setting sensitivity will turn the automatic control off. You can also control each of the five immunity parameters (noise immunity, spur immunity, firstep, ofdm weak signal detection, cck weak signal detection) manually thru the debugfs file. This is tested on AR5414 and nearly doubles the thruput in a noisy 2GHz band. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath5k: update phy errors codesBruno Randolf1-0/+1
Update PHY error codes from the HAL, and keep them in statistics for debugging via the 'frameerrors' file. This will also be used by ANI. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath5k: simplify MIB countersBruno Randolf1-2/+11
Let's keep MIB counter statistics in our own statistics structure and only convert it to ieee80211_low_level_stats when needed by mac80211. Also we don't need to read profile count registers in the MIB interrupt (they don't trigger MIB interrupts). Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11ath5k: add debugfs file frameerrorsBruno Randolf1-0/+12
add a debugfs file to see different RX and TX errors as reported in our status descriptors. this can help to diagnose driver problems. statistics can be cleared by writing 'clear' into the frameerrors file. example: # cat /sys/kernel/debug/ath5k/phy0/frameerrors RX --------------------- CRC 27 (11%) PHY 3 (1%) FIFO 0 (0%) decrypt 0 (0%) MIC 0 (0%) process 0 (0%) jumbo 0 (0%) [RX all 245] TX --------------------- retry 2 (9%) FIFO 0 (0%) filter 0 (0%) [TX all 21] Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-11ath5k: add antenna statistics and debugfs file for antenna settingsBruno Randolf1-0/+8
keep statistics about which antenna was used for TX and RX. this is used only for debugging right now, but might have other applications later. add a new file 'antenna' in debugfs (/sys/kernel/debug/ath5k/phy0/antenna) to show antenna use statistics and antenna diversity related register values. it can also be used to set the antenna mode until we have proper support for that in iw: - echo diversity > antenna: use default antenna mode (RX and TX diversity) - echo fixed-a > antenna: use fixed antenna A for RX and TX - echo fixed-b > antenna: use fixed antenna B for RX and TX - echo clear > antenna: reset antenna statistics Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-15Merge branch 'master' of ↵David S. Miller1-1/+0
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-09ath5k: remove get_tx_stats() mac80211 opKalle Valo1-1/+0
get_tx_stats() will be removed from mac80211. Compile-tested only. Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-05tree-wide: fix misspelling of "definition" in commentsAdam Buchbinder1-1/+1
"Definition" is misspelled "defintion" in several comments; this patch fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04tree-wide: fix some typos and punctuation in commentsThadeu Lima de Souza Cascardo1-1/+1
fix some typos and punctuation in comments Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-12ath5k: use the common->keymapLuis R. Rodriguez1-2/+0
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08ath5k: define ath_common opsLuis R. Rodriguez1-11/+0
Only common ath read/write ops go through the common ops. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-08ath5k: move ath_common to ath5k_hwLuis R. Rodriguez1-2/+1
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ath: move regulatory info into shared common structureLuis R. Rodriguez1-0/+13
This moves the shared regulatory structure into the common structure. We will use this ongoing for common data. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath5k: use common ath.ko ath_rxbuf_alloc()Luis R. Rodriguez1-1/+2
Now that its shared we can remove ath5k's own implementation. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ath5k: Use SWI to trigger calibrationNick Kossifidis1-1/+2
* Get rid of calibration timer, instead use a software interrupt to schedule the calibration tasklet. a) We don't need a timer for this, there is no need for accuracy even with round_jiffies i think this is a waste of resources. Also we don't need to run calibration if we are idle (no interrupts). b) When we add ANI support we 'll just extend the poll function and calibration tasklet and handle all periodic phy calibration on one place (much cleaner). c) Having calibration on a tasklet is better since during calibration we can't transmit or receive (antennas are detached to measure noise floor), previously calibration could run in parallel with tx/rx and interfere (packet loss). v2: kill tasklet on stop_hw, stop/wake queues v3: use time_is_before_eq_jiffies to compare timestamp with current time Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath5k: rework beacon configurationBob Copeland1-0/+1
Using the enable_beacon flag allows some simplifications and fixes some corner cases in beacon handling. This change adds a state variable for beaconing in ath5k_beacon_config and handles both enabling and disabling, thus eliminating the need for ath5k_beacon_disable. We also now configure the beacon when any of the beacon parameters change, so ath5k_beacon_reconfig is no longer needed (its mmiowb gets moved to ath5k_beacon_config). Finally, by locking around the whole config function, we don't need to worry about clearing the interrupt mask register before installing the new mask. The upshot is this correctly disables beaconing when the interfaces are taken down, it fixes a potential restarting of beaconing when ath5k_reset() is called, and ensures that updates to the beacon interval take effect immediately. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10ath5k: send buffered frames after the beaconBob Copeland1-5/+4
Enable the "Content" After Beacon queue and utilize it to send any buffered frames for power-saving clients. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10ath5k: minor rfkill cleanupBob Copeland1-2/+0
Always enable rfkill since the ifdefs in the code is not really worth the Kconfig option. Also fix a few code style things, and remove the usage of the ah_gpio[] array so we can remove it later. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10ath5k: added cfg80211 based rfkill supportTobias Doerffel1-0/+14
This patch introduces initial rfkill support for the ath5k driver based on rfkill support in the cfg80211 framework. All rfkill related code is separated into newly created rfkill.c. Changes to existing code are minimal: * added a new data structure ath5k_rfkill to the ath5k_softc structure * inserted calls to HW rfkill init/deinit routines * ath5k_intr() has been extended to handle AR5K_INT_GPIO interrupts Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-23ath5k: use rx hw descriptor pointer for self-linked checkBob Copeland1-1/+0
This patch simplifies the code used to detect when the self-linked DMA buffer is still in use by hardware, by checking the hardware's rxdp register instead of looking at the software buffer list. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 02:04:56 +0300