summaryrefslogtreecommitdiff
path: root/drivers/net/phy/smsc.c
AgeCommit message (Collapse)AuthorFilesLines
2015-10-21net: phy: smsc: disable energy detect modeHeiko Schocher1-5/+14
On some boards the energy enable detect mode leads in trouble with some switches, so make the enabling of this mode configurable through DT. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: phy: fix semicolon.cocci warningskbuild test robot1-1/+1
drivers/net/phy/smsc.c:127:3-4: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: phy: workaround for buggy cable detection by LAN8700 after cable pluggingIgor Plyatov1-12/+19
* Due to HW bug, LAN8700 sometimes does not detect presence of energy in the Ethernet cable in Energy Detect Power-Down mode (e.g while EDPWRDOWN bit is set, the ENERGYON bit does not asserted sometimes). This is a common bug of LAN87xx family of PHY chips. * The lan87xx_read_status() was improved to acquire ENERGYON bit. Its previous algorythm still not reliable on 100 % and sometimes skip cable plugging. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: replace phy_drivers_register callsJohan Hovold1-13/+1
Replace module init/exit which only calls phy_drivers_register with module_phy_driver macro. Tested using Micrel driver, and otherwise compile-tested only. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-17net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset functionGwenhael Goavec-Merou1-12/+21
On the one hand, phy_device.c provides a generic reset function if the phy driver does not provide a soft_reset pointer. This generic reset does not take into account the state of the phy, with a potential failure if the phy is in powerdown mode. On the other hand, smsc driver provides a function with both correct reset behaviour and configuration. This patch moves the reset part into a new smsc_phy_reset function and provides the soft_reset pointer to have a correct reset behaviour by default. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23net/phy: Remove return value for void functionShruti Kanetkar1-2/+1
This was caught when using a spatch (aka. coccinelle) script written by Joe Perches. Cc: Joe Perches <joe@perches.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07net: phy: smsc: Fix config_init typoPatrick Trantham1-1/+1
Correct a mistake made in the previous commit due to reckless copy-and-pasting. Signed-off-by: Patrick Trantham <patrick.trantham@fuel7.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07net: phy: smsc: force all capable mode if the phy is started in powerdown modetrem1-1/+25
A SMSC PHY in power down mode can't be used. If a SMSC PHY is in this mode in the config_init stage, the mode "all capable" is set. So the PHY could then be used. Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-16net: phy: smsc: Re-enable EDPD mode for LAN87xxPatrick Trantham1-26/+43
This patch re-enables Energy Detect Power Down (EDPD) mode for the LAN8710/LAN8720. EDPD mode was disabled in a previous commit, (b629820d18fa65cc598390e4b9712fd5f83ee693), because it was causing the PHY to not be able to detect a link when cold started without a cable connected. The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of each other in order to set the ENERGYON bit and exit EDPD mode. If a link partner does send the pulses within this interval, the PHY will remained powered down. This workaround will manually toggle the PHY on/off upon calls to read_status in order to generate link test pulses if the link is down. If a link partner is present, it will respond to the pulses, which will cause the ENERGYON bit to be set and will cause the EDPD mode to be exited. Signed-off-by: Patrick Trantham <patrick.trantham@fuel7.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28net: phy: smsc: Implement PHY config_init for LAN87xxMarek Vasut1-1/+27
The LAN8710/LAN8720 chips do have broken the "FlexPWR" smart power-saving capability. Enabling it leads to the PHY not being able to detect Link when cold-started without cable connected. Thus, make sure this is disabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christian Hohnstaedt <chohnstaedt@innominate.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-25Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Trivial updates all over the place as usual." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits) Fix typo in include/linux/clk.h . pci: hotplug: Fix typo in pci iommu: Fix typo in iommu video: Fix typo in drivers/video Documentation: Add newline at end-of-file to files lacking one arm,unicore32: Remove obsolete "select MISC_DEVICES" module.c: spelling s/postition/position/g cpufreq: Fix typo in cpufreq driver trivial: typo in comment in mksysmap mach-omap2: Fix typo in debug message and comment scsi: aha152x: Fix sparse warning and make printing pointer address more portable. Change email address for Steve Glendinning Btrfs: fix typo in convert_extent_bit via: Remove bogus if check netprio_cgroup.c: fix comment typo backlight: fix memory leak on obscure error path Documentation: asus-laptop.txt references an obsolete Kconfig item Documentation: ManagementStyle: fixed typo mm/vmscan: cleanup comment error in balance_pgdat mm: cleanup on the comments of zone_reclaim_stat ...
2012-07-17Change email address for Steve GlendinningSteve Glendinning1-1/+1
I no longer have a mailbox at smsc.com, and I've had two reports that that email address now bounces from people trying to contact me. This patch updates all references to that invalid address to one that I can be contacted on more permanently. This patch also updates the maintainer status to reflect the fact I'm no longer directly paid to maintain these drivers. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-09phylib: Support registering a bunch of driversChristian Hohnstaedt1-53/+11
If registering of one of them fails, all already registered drivers of this module will be unregistered. Use the new register/unregister functions in all drivers registering more than one driver. amd.c, realtek.c: Simplify: directly return registration result. Tested with broadcom.c All others compile-tested. Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04net: phy: smsc: Move SMSC PHY constants to <linux/smscphy.h>Javier Martinez Canillas1-20/+1
SMSC generation 4 LAN chips integrate an IEEE 802.3 ethernet physical layer. The ethernet driver for this family of devices needs to access the SMSC PHY registers and bit-fields. So, this patch moves these constants to a place where it can be used for both the PHY and LAN drivers. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05net/phy: fix many "defined but unused" warningsUwe Kleine-König1-1/+1
MODULE_DEVICE_TABLE only expands to something if it's compiled for a module. So when building-in support for the phys, the mdio_device_id tables are unused. Marking them with __maybe_unused fixes the following warnings: drivers/net/phy/bcm63xx.c:134: warning: 'bcm63xx_tbl' defined but not used drivers/net/phy/broadcom.c:933: warning: 'broadcom_tbl' defined but not used drivers/net/phy/cicada.c:162: warning: 'cicada_tbl' defined but not used drivers/net/phy/davicom.c:222: warning: 'davicom_tbl' defined but not used drivers/net/phy/et1011c.c:114: warning: 'et1011c_tbl' defined but not used drivers/net/phy/icplus.c:137: warning: 'icplus_tbl' defined but not used drivers/net/phy/lxt.c:226: warning: 'lxt_tbl' defined but not used drivers/net/phy/marvell.c:724: warning: 'marvell_tbl' defined but not used drivers/net/phy/micrel.c:234: warning: 'micrel_tbl' defined but not used drivers/net/phy/national.c:154: warning: 'ns_tbl' defined but not used drivers/net/phy/qsemi.c:141: warning: 'qs6612_tbl' defined but not used drivers/net/phy/realtek.c:82: warning: 'realtek_tbl' defined but not used drivers/net/phy/smsc.c:257: warning: 'smsc_tbl' defined but not used drivers/net/phy/ste10Xp.c:135: warning: 'ste10Xp_tbl' defined but not used drivers/net/phy/vitesse.c:195: warning: 'vitesse_tbl' defined but not used Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03phylib: Add module table to all existing phy driversDavid Woodhouse1-0/+11
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07phy: SMSC device Energy Detect power-down modeGiuseppe Cavallaro1-2/+19
SMSC Ethernet Transceivers (LAN88710, LAN8710, LAN8720, LAN8187, LAN8700, LAN83C185) provide a mechanism to conserve power when the device is not connected to an active link partner (Energy Detect Mode). So this patch enables the Energy Detect power-down mode for these Transceivers. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24phy: add new LAN8710 and LAN8720 device ids to smsc phy driverSteve Glendinning1-0/+31
LAN8710 and LAN8720 are two new 10/100 ethernet PHY models. The two share the same phy id, this patch adds it to the smsc phy driver. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-23phy: Add suspend/resume support to SMSC PHYsSteve Glendinning1-0/+12
All supported SMSC PHYs implement the standard "power down" bit 11 of BMCR, so this patch adds support using the generic genphy_{suspend,resume} functions. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-06SMSC LAN911x and LAN921x vendor driverSteve Glendinning1-0/+28
Attached is a driver for SMSC's LAN911x and LAN921x families of embedded ethernet controllers. There is an existing smc911x driver in the tree; this is intended to replace it. Dustin McIntire (the author of the smc911x driver) has expressed his support for switching to this driver. This driver contains workarounds for all known hardware issues, and has been tested on all flavours of the chip on multiple architectures. This driver now uses phylib, so this patch also adds support for the device's internal phy Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Bahadir Balban <Bahadir.Balban@arm.com> Signed-off-by: Dustin Mcintire <dustin@sensoria.com> Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29Add support for SMSC LAN8187 and LAN8700 PHYsSteve Glendinning1-1/+68
Add support for two additional SMSC PHY models with identical interrupt source and mask registers to the LAN83C185 Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29Rename SMSC phy functions to be more genericSteve Glendinning1-7/+7
Several models of SMSC PHY have the same interrupt status and mask registers as the LAN83C185, so these functions can service multiple different PHY drivers. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2006-08-14[PATCH] remove unnecessary config.h includes from drivers/net/Dave Jones1-1/+0
config.h is automatically included by kbuild these days. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24[PATCH] phy: new SMSC LAN83C185 PHY driverHerbert Valerio Riedel1-0/+101
new SMSC LAN83C185 10BaseT/100BaseTX PHY driver for the PHY subsystem Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>