summaryrefslogtreecommitdiff
path: root/drivers/net/mlx4
AgeCommit message (Collapse)AuthorFilesLines
2011-08-05mlx4: decreasing ref count when removing macYevgeny Petrilin1-3/+6
For older FW versions, when a Mac address removed from Mac table, we should set 0 for reference count for the corresponding Mac index. Fixes a bug where removing Mac from the table still left that entry as invalid. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Tested-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-04mlx4: Fixing Ethernet unicast packet steeringYevgeny Petrilin2-1/+3
For older FW versions, fixing the usage of per port Mac table. For each port we must define the base QP number, which is passed to the HW. Setting the correct value in SET_PORT FW command to enable the steering. Reported-by: Roland Dreier <roland@purestorage.com> Tested-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23Merge branch 'for-linus' of ↵Linus Torvalds11-49/+112
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits) IB/qib: Defer HCA error events to tasklet mlx4_core: Bump the driver version to 1.0 RDMA/cxgb4: Use printk_ratelimited() instead of printk_ratelimit() IB/mlx4: Support PMA counters for IBoE IB/mlx4: Use flow counters on IBoE ports IB/pma: Add include file for IBA performance counters definitions mlx4_core: Add network flow counters mlx4_core: Fix location of counter index in QP context struct mlx4_core: Read extended capabilities into the flags field mlx4_core: Extend capability flags to 64 bits IB/mlx4: Generate GID change events in IBoE code IB/core: Add GID change event RDMA/cma: Don't allow IPoIB port space for IBoE RDMA: Allow for NULL .modify_device() and .modify_port() methods IB/qib: Update active link width IB/qib: Fix potential deadlock with link down interrupt IB/qib: Add sysfs interface to read free contexts IB/mthca: Remove unnecessary read of PCI_CAP_ID_EXP IB/qib: Remove double define IB/qib: Remove unnecessary read of PCI_CAP_ID_EXP ...
2011-07-22mlx4_core: Bump the driver version to 1.0Dotan Barak1-2/+2
Many features were added to this driver, so the driver version should change too. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-22mlx4: do vlan cleanupJiri Pirko4-65/+37
- unify vlan and nonvlan path - kill priv->vlgrp and mlx4_en_vlan_rx_register Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-19mlx4_core: Add network flow countersOr Gerlitz4-1/+66
ConnectX devices support a set of flow counters that can be attached to a set containing one or more QPs. Each such counter tracks receive and transmit packets and bytes of these QPs. This patch queries the device to check support for counters, handles initialization of the HCA to enable counters, and initializes a bitmap allocator to control counter allocations. Derived from patch by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-19mlx4_core: Read extended capabilities into the flags fieldOr Gerlitz10-44/+41
Query another dword containing up to 32 extended device capabilities and merge it into struct mlx4_caps.flags. Update the code that handles the current extended device capabilities (e.g UDP RSS, WoL, vep steering, etc) to use the extended device cap flags field instead of a field per extended capability. Initial patch done by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-19mlx4_core: Extend capability flags to 64 bitsOr Gerlitz2-5/+6
The latest firmware adds a second dword containing more device flags, so extend the device capabilities flags field from 32 to 64 bits. Derived from patch by Eli Cohen <eli@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-06-28mlx4: remove unnecessary read of PCI_CAP_ID_EXPJon Mason1-1/+1
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-28mlx4: use pci_dev->revisionSergei Shtylyov1-2/+2
Commit 725c89997e03d71b09ea3c17c997da0712b9d835 (mlx4_en: Reporting HW revision in ethtool -i) added code to read the revision ID from the PCI configuration register while it's already stored by PCI subsystem in the 'revision' field of 'struct pci_dev'... While at it, move the code being changed a bit in order to not break the initialization sequence. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-22drivers/net: Remove casts of void *Joe Perches2-4/+3
Unnecessary casts of void * clutter the code. These are the remainder casts after several specific patches to remove netdev_priv and dev_priv. Done via coccinelle script (and a little editing): $ cat cast_void_pointer.cocci @@ type T; T *pt; void *pv; @@ - pt = (T *)pv; + pt = pv; Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-By: Chris Snook <chris.snook@gmail.com> Acked-by: Jon Mason <jdmason@kudzu.us> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30ethtool: cosmetic: Use ethtool ethtool_cmd_speed APIDavid Decotigny1-2/+2
This updates the network drivers so that they don't access the ethtool_cmd::speed field directly, but use ethtool_cmd_speed() instead. For most of the drivers, these changes are purely cosmetic and don't fix any problem, such as for those 1GbE/10GbE drivers that indirectly call their own ethtool get_settings()/mii_ethtool_gset(). The changes are meant to enforce code consistency and provide robustness with future larger throughputs, at the expense of a few CPU cycles for each ethtool operation. All drivers compiled with make allyesconfig ion x86_64 have been updated. Tested: make allyesconfig on x86_64 + e1000e/bnx2x work Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-30ethtool: Use full 32 bit speed range in ethtool's set_settingsDavid Decotigny1-1/+2
This makes sure the ethtool's set_settings() callback of network drivers don't ignore the 16 most significant bits when ethtool calls their set_settings(). All drivers compiled with make allyesconfig on x86_64 have been updated. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-16net: mlx4: convert to hw_featuresMichał Mirosław4-60/+11
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds4-2/+13
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) net: Add support for SMSC LAN9530, LAN9730 and LAN89530 mlx4_en: Restoring RX buffer pointer in case of failure mlx4: Sensing link type at device initialization ipv4: Fix "Set rt->rt_iif more sanely on output routes." MAINTAINERS: add entry for Xen network backend be2net: Fix suspend/resume operation be2net: Rename some struct members for clarity pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev dsa/mv88e6131: add support for mv88e6085 switch ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2) be2net: Fix a potential crash during shutdown. bna: Fix for handling firmware heartbeat failure can: mcp251x: Allow pass IRQ flags through platform data. smsc911x: fix mac_lock acquision before calling smsc911x_mac_read iwlwifi: accept EEPROM version 0x423 for iwl6000 rt2x00: fix cancelling uninitialized work rtlwifi: Fix some warnings/bugs p54usb: IDs for two new devices wl12xx: fix potential buffer overflow in testmode nvs push zd1211rw: reset rx idle timer from tasklet ...
2011-04-08mlx4_en: Restoring RX buffer pointer in case of failureYevgeny Petrilin1-0/+4
If not done, second attempt to open the RX ring would cause memory corruption. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-08mlx4: Sensing link type at device initializationYevgeny Petrilin3-2/+9
When bringing the port up, performing a SENSE_PORT command To try and check to which physical link type (IB or Ethernet) the physical port is connected. In case there is no valid link partner, the port will come up as its supported default. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds7-12/+12
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-04mlx4: fix kfree on error path in new_steering_entry()Mariusz Kozlowski1-2/+2
On error path kfree() should get pointer to memory allocated by kmalloc() not the address of variable holding it (which is on stack). Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi7-12/+12
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31mlx4: Fixing bad size of event queue bufferYevgeny Petrilin1-1/+3
We should reduce the number of reserved completion queues from the total number of entries. Since the queue size is power of two, not reducing the reserved entries, caused a double queue size, which may lead to allocation failures in some cases. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31mlx4: Fixing use after freeYevgeny Petrilin1-1/+2
In case of allocation failure, tried to use the promiscuous QP entry that was previously freed. Now freeing this entry only in case we will not put it back to the list of promiscuous entries. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-0/+3
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) xfrm: Restrict extended sequence numbers to esp xfrm: Check for esn buffer len in xfrm_new_ae xfrm: Assign esn pointers when cloning a state xfrm: Move the test on replay window size into the replay check functions netdev: bfin_mac: document TE setting in RMII modes drivers net: Fix declaration ordering in inline functions. cxgb3: Apply interrupt coalescing settings to all queues net: Always allocate at least 16 skb frags regardless of page size ipv4: Don't ip_rt_put() an error pointer in RAW sockets. net: fix ethtool->set_flags not intended -EINVAL return value mlx4_en: Fix loss of promiscuity tg3: Fix inline keyword usage tg3: use <linux/io.h> and <linux/uaccess.h> instead <asm/io.h> and <asm/uaccess.h> net: use CHECKSUM_NONE instead of magic number Net / jme: Do not use legacy PCI power management myri10ge: small rx_done refactoring bridge: notify applications if address of bridge device changes ipv4: Fix IP timestamp option (IPOPT_TS_PRESPEC) handling in ip_options_echo() can: c_can: Fix tx_bytes accounting can: c_can_platform: fix irq check in probe ...
2011-03-28mlx4_en: Fix loss of promiscuityHerbert Xu1-0/+3
The mlx4_en driver uses the combination stop_port/start_port in a number of places. Unfortunately that causes any promiscuous mode settings on the hardware to be lost. This patch fixes that problem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds20-183/+1520
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) route: Take the right src and dst addresses in ip_route_newports ipv4: Fix nexthop caching wrt. scoping. ipv4: Invalidate nexthop cache nh_saddr more correctly. net: fix pch_gbe section mismatch warning ipv4: fix fib metrics mlx4_en: Removing HW info from ethtool -i report. net_sched: fix THROTTLED/RUNNING race drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region bonding: fix rx_handler locking myri10ge: fix rmmod crash mlx4_en: updated driver version to 1.5.4.1 mlx4_en: Using blue flame support mlx4_core: reserve UARs for userspace consumers mlx4_core: maintain available field in bitmap allocator mlx4: Add blue flame support for kernel consumers mlx4_en: Enabling new steering mlx4: Add support for promiscuous mode in the new steering model. mlx4: generalization of multicast steering. mlx4_en: Reporting HW revision in ethtool -i ...
2011-03-24mlx4_en: Removing HW info from ethtool -i report.Yevgeny Petrilin1-14/+1
Avoiding abuse of ethtool_drvinfo.driver field. HW specific info can be retrieved using lspci. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: updated driver version to 1.5.4.1Yevgeny Petrilin1-2/+2
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Using blue flame supportYevgeny Petrilin3-22/+64
Doorbell is used according to usage of BlueFlame. For Blue Flame to work in Ethernet mode QP number should have 0 at bits 6,7. Allocating range of QPs accordingly. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_core: reserve UARs for userspace consumersEli Cohen1-0/+8
Do not allow a kernel consumer to allocate a UAR to serve for blue flame if the number of available UARs gets below MLX4_NUM_RESERVED_UARS (currently 8). This will allow userspace apps to open a device file and run things like ibv_devinfo. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_core: maintain available field in bitmap allocatorEli Cohen2-0/+15
Add mlx4_bitmap_avail() to give the number of available resources. We want to use this as a hint to whether to allocate a resources or not. This patch is introduced to be used with allocation blue flame registers. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Add blue flame support for kernel consumersEli Cohen3-0/+128
Using blue flame can improve latency by allowing the HW to more efficiently access the WQE. This patch presents two functions that are used to allocate or release HW resources for using blue flame; the caller need to supply a struct mlx4_bf object when allocating resources. Consumers that make use of this API should post doorbells to the UAR object pointed by the initialized struct mlx4_bf; Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Enabling new steeringYevgeny Petrilin8-58/+291
The mlx4_en module now uses the new steering mechanism. The RX packets are now steered through the MCG table instead of Mac table for unicast, and default entry for multicast. The feature is enabled through INIT_HCA Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Add support for promiscuous mode in the new steering model.Yevgeny Petrilin3-11/+620
For Ethernet mode only, When we want to register QP as promiscuous, it must be added to all the existing steering entries and also to the default one. The promiscuous QP might also be on of "real" QPs, which means we need to monitor every entry to avoid duplicates and ensure we close an entry when all it has is promiscuous QPs. Same mechanism both for unicast and multicast. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: generalization of multicast steering.Yevgeny Petrilin5-36/+85
The same packet steering mechanism would be used both for IB and Ethernet, Both multicasts and unicasts. This commit prepares the general infrastructure for this. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Reporting HW revision in ethtool -iYevgeny Petrilin3-1/+19
HW revision is derived from device ID and rev id. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Wake on LAN supportYevgeny Petrilin5-2/+89
The driver queries the FW for WOL support. Ethtool get/set_wol is implemented accordingly. Only magic packets are supported at the time. Signed-off-by: Igor Yarovinsky <igory@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: using new mlx4 interrupt schemeYevgeny Petrilin5-23/+62
Each RX ring will have its own interrupt vector, and TX rings will share one (we mostly use polling for TX completions). The vectors are assigned first time device is opened, and its name includes the interface name and ring number. Signed-off-by: Markuze Alex <markuze@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Changing interrupt schemeYevgeny Petrilin5-13/+126
Adding a pool of MSI-X vectors and EQs that can be used explicitly by mlx4_core customers (mlx4_ib, mlx4_en). The consumers will assign their own names to the interrupt vectors. Those vectors are not opened at mlx4 device initialization, opened by demand. Changed the max number of possible EQs according to the new scheme, no longer relies on on number of cores. The new functionality is exposed through mlx4_assign_eq() and mlx4_release_eq(). Customers that do not use the new API will get completion vectors as before. Signed-off-by: Markuze Alex <markuze@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: bringing link up when registering netdeviceYevgeny Petrilin1-0/+17
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: optimize adaptive moderation algorithm for better latencyYevgeny Petrilin2-13/+6
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: moderation parameters are not reseted.Yevgeny Petrilin1-2/+1
Instead of reseting the module parameters each ifup or mtu change, they are being set once at device initialization Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: going out of range of TX rings when reporting statsYevgeny Petrilin1-1/+1
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22IB: Increase DMA max_segment_size on Mellanox hardwareDavid Dillow1-0/+3
By default, each device is assumed to be able only handle 64 KB chunks during DMA. By giving the segment size a larger value, the block layer will coalesce more S/G entries together for SRP, allowing larger requests with the same sg_tablesize setting. The block layer is the only direct user of it, though a few IOMMU drivers reference it as well for their *_map_sg coalescing code. pci-gart_64 on x86, and a smattering on on sparc, powerpc, and ia64. Since other IB protocols could potentially see larger segments with this, let's check those: - iSER is fine, because you limit your maximum request size to 512 KB, so we'll never overrun the page vector in struct iser_page_vec (128 entries currently). It is independent of the DMA segment size, and handles multi-page segments already. - IPoIB is fine, as it maps each page individually, and doesn't use ib_dma_map_sg(). - RDS appears to do the right thing and has no dependencies on DMA segment size, but I don't claim to have done a complete audit. - NFSoRDMA and 9p are OK -- they do not use ib_dma_map_sg(), so they doesn't care about the coalescing. - Lustre's ko2iblnd does not care about coalescing -- it properly walks the returned sg list. This patch ups the value on Mellanox hardware to 1 GB, which matches reported firmware limits on mlx4. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-29mlx4_core: Add ConnectX-3 device IDsYevgeny Petrilin1-0/+15
...as already added to pci.ids. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-13IB/mlx4: Handle protocol field in multicast tableAleksey Senin1-10/+13
The newest device firmware stores IB vs. Ethernet protocol in two bits in members_count field of multicast group table (0: Infiniband, 1: Ethernet). When changing the QP members count for a multicast group, it important not to reset this information. When calling multicast attach first time, the protocol type should be specified. In this patch we always set it IB, but in the future we will handle Ethernet too. When looking for a QP, the protocol type shoud be checked too. Signed-off-by: Aleksey Senin <alekseys@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long)Roland Dreier3-5/+6
Some systems have PCI addresses that don't fit in unsigned long (eg some 32-bit PowerPC 440 systems have 36-bit bus addresses). Fix up mlx4 drivers by using phys_addr_t where appropriate, so we don't truncate any PCI resource addresses before ioremapping them. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-1/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (67 commits) cxgb4vf: recover from failure in cxgb4vf_open() netfilter: ebtables: make broute table work again netfilter: fix race in conntrack between dump_table and destroy ah: reload pointers to skb data after calling skb_cow_data() ah: update maximum truncated ICV length xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNC ehea: Increase the skb array usage net/fec: remove config FEC2 as it's used nowhere pcnet_cs: add new_id tcp: disallow bind() to reuse addr/port net/r8169: Update the function of parsing firmware net: ppp: use {get,put}_unaligned_be{16,32} CAIF: Fix IPv6 support in receive path for GPRS/3G arp: allow to invalidate specific ARP entries net_sched: factorize qdisc stats handling mlx4: Call alloc_etherdev to allocate RX and TX queues net: Add alloc_netdev_mqs function caif: don't set connection request param size before copying data cxgb4vf: fix mailbox data/control coherency domain race qlcnic: change module parameter permissions ...
2011-01-11mlx4_core: Avoid vunmap() of invalid pointer if allocation failsAli Ayoub1-1/+2
Signed-off-by: Ali Ayoub <ali@mellanox.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11mlx4_core: Remove warning message about firmware bugRoland Dreier1-3/+1
The kernel warning message added in commit 58d74bb1d9f7 ("mlx4_core: Workaround firmware bug in query dev cap") about mlx4 reporting the wrong number of "blue flame registers" doesn't really help anyone, since the firmware bug is known and fixed and the bug is pretty much harmless to users. So just get rid of the warning. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11mlx4: Call alloc_etherdev to allocate RX and TX queuesTom Herbert1-1/+2
Changed driver to call alloc_etherdev_mqs so that the number of TX and RX queues can be set to correct values in the netdev device. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 12:57:36 +0300