summaryrefslogtreecommitdiff
path: root/drivers/net/macvlan.c
AgeCommit message (Collapse)AuthorFilesLines
2016-06-09net: macvlan: call netdev_lockdep_set_classes()Eric Dumazet1-10/+1
In case a qdisc is used on a macvlan device, we need to use different lockdep classes to avoid false positives. Use the new netdev_lockdep_set_classes() generic helper. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-02macvlan: Avoid unnecessary multicast cloningHerbert Xu1-6/+34
Currently we always queue a multicast packet for further processing, even if none of the macvlan devices are subscribed to the address. This patch optimises this by adding a global multicast filter for a macvlan_port. Note that this patch doesn't handle the broadcast addresses of the individual macvlan devices correctly, if they are not all identical to vlan->lowerdev. However, this is already broken because there is no mechanism in place to update the individual multicast filters when you change the broadcast address. If someone cares enough they should fix this by collecting all broadcast addresses for a macvlan as we do for multicast and unicast. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-02macvlan: Fix potential use-after free for broadcastsHerbert Xu1-2/+8
When we postpone a broadcast packet we save the source port in the skb if it is local. However, the source port can disappear before we get a chance to process the packet. This patch fixes this by holding a ref count on the netdev. It also delays the skb->cb modification until after we allocate the new skb as you should not modify shared skbs. Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26macvlan: fix failure during registration v3Francesco Ruggeri1-6/+4
If macvlan_common_newlink fails in register_netdevice after macvlan_init then it decrements port->count twice, first in macvlan_uninit (from register_netdevice or rollback_registered) and then again in macvlan_common_newlink. A similar problem may exist in the ipvlan driver. This patch consolidates modifications to port->count into macvlan_init and macvlan_uninit (thanks to Eric Biederman for suggesting this approach). v3: remove macvtap specific bits. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18vlan: propagate gso_max_segsEric Dumazet1-0/+2
vlan drivers lack proper propagation of gso_max_segs from lower device. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26net: macvlan: use __ethtool_get_ksettingsDavid Decotigny1-4/+4
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17macvlan: convert to use IFF_NO_QUEUEZhang Shengju1-1/+1
Use IFF_NO_QUEUE to indicate that a device can run without a qdisc. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29macvlan: make operstate and carrier more accurateNikolay Aleksandrov1-0/+2
Currently when a macvlan is being initialized and the lower device is netif_carrier_ok(), the macvlan device doesn't run through rfc2863_policy() and is left with UNKNOWN operstate. Fix it by adding an unconditional linkwatch event for the new macvlan device. Similar fix is already used by the 8021q device (see register_vlan_dev()). Also fix the inconsistent state when the lower device has been down and its carrier was changed (when a device is down NETDEV_CHANGE doesn't get generated). The second issue can be seen f.e. when we have a macvlan on top of a 8021q device which has been down and its real device has been changing carrier states, after setting the 8021q device up, the macvlan device will have the same carrier state as it was before even though the 8021q can now have a different state. Example for case 1: 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 $ ip l add l eth2 macvl0 type macvlan $ ip l set macvl0 up $ ip l sh macvl0 72: macvl0@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether f6:0b:54:0a:9d:a3 brd ff:ff:ff:ff:ff:ff Example for case 2 (order is important): Prestate: eth2 UP/CARRIER, vlan1 down, vlan1-macvlan down $ ip l set vlan1-macvlan up $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff [ eth2 loses CARRIER before vlan1 has been UP-ed ] $ ip l sh eth2 4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff $ ip l set vlan1 up $ ip l sh vlan1 70: vlan1@eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff vlan1-macvlan is still UP, still has carrier and is still in the same operstate as before. After the patch in case 1 macvl0 has state UP as it should and in case 2 vlan1-macvlan has state LOWERLAYERDOWN again as it should. Note that while the lower macvlan device is down their carrier and thus operstate can go out of sync but that will be fixed once the lower device goes up again. This behaviour seems to have been present since beginning of git history. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16net: Eliminate NETIF_F_GEN_CSUM and NETIF_F_V[46]_CSUMTom Herbert1-1/+1
These netif flags are unnecessary convolutions. It is more straightforward to just use NETIF_F_HW_CSUM, NETIF_F_IP_CSUM, and NETIF_F_IPV6_CSUM directly. This patch also: - Cleans up can_checksum_protocol - Simplifies netdev_intersect_features Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASKTom Herbert1-1/+1
The name NETIF_F_ALL_CSUM is a misnomer. This does not correspond to the set of features for offloading all checksums. This is a mask of the checksum offload related features bits. It is incorrect to set both NETIF_F_HW_CSUM and NETIF_F_IP_CSUM or NETIF_F_IPV6 at the same time for features of a device. This patch: - Changes instances of NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK (where NETIF_F_ALL_CSUM is being used as a mask). - Changes bonding, sfc/efx, ipvlan, macvlan, vlan, and team drivers to use NEITF_F_HW_CSUM in features list instead of NETIF_F_ALL_CSUM. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-17macvlan: fix leak in macvlan_handle_frameSabrina Dubroca1-0/+2
Reset pskb in macvlan_handle_frame in case skb_share_check returned a clone. Fixes: 8a4eb5734e8d ("net: introduce rx_handler results and logic around that") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13ipv4: Pass struct net into ip_defrag and ip_check_defragEric W. Biederman1-1/+1
The function ip_defrag is called on both the input and the output paths of the networking stack. In particular conntrack when it is tracking outbound packets from the local machine calls ip_defrag. So add a struct net parameter and stop making ip_defrag guess which network namespace it needs to defragment packets in. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04macvlan: Don't segment multiple tagged packets on macvlan deviceToshiaki Makita1-0/+1
Macvlan/macvtap devices don't need to segment multiple tagged packets since the lower devices can segment them. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04macvlan: Propagate promiscuity setting to lower devices.Vlad Yasevich1-0/+15
When a macvlan device is placed in promiscuous mode, it currently just sets it's multicast mask to permissive, but doesn't change the state of the lower device. As a result, not all multicast traffic can be received on such device. Additionally, none of a vlan traffic can be received on such device as well. This patch propagates the promiscuous mode setting to lower device so that lower device may receive all packets that macvlan may be interested in. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02macvlan: implement ndo_get_iflinkNicolas Dichtel1-1/+8
Don't use dev->iflink anymore. CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03net: Kill dev_rebuild_headerEric W. Biederman1-1/+0
Now that there are no more users kill dev_rebuild_header and all of it's implementations. This is long overdue. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24macvlan: advertise link netns via netlinkNicolas Dichtel1-0/+6
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10macvlan: play well with ipvlan deviceMahesh Bandewar1-0/+3
If device is already used as an ipvlan port then refuse to use it as a macvlan port at early stage of port creation. thost1:~# ip link add link eth0 ipvl0 type ipvlan thost1:~# echo $? 0 thost1:~# ip link add link eth0 mvl0 type macvlan RTNETLINK answers: Device or resource busy thost1:~# echo $? 2 thost1:~# Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10macvlan: allow setting LRO independently of lower deviceMichal Kubeček1-4/+5
Since commit fbe168ba91f7 ("net: generic dev_disable_lro() stacked device handling"), dev_disable_lro() zeroes NETIF_F_LRO feature flag first for a macvlan device and then for its lower device. As an attempt to set NETIF_F_LRO to zero is ignored, dev_disable_lro() issues a warning and taints kernel. Allowing NETIF_F_LRO to be set independently of the lower device consists of three parts: - add the flag to hw_features to allow toggling it - allow setting it to 0 even if lower device has the flag set - add the flag to MACVLAN_FEATURES to restore copying from lower device on macvlan creation Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03net: make vid as a parameter for ndo_fdb_add/ndo_fdb_delJiri Pirko1-2/+2
Do the work of parsing NDA_VLAN directly in rtnetlink code, pass simple u16 vid to drivers from there. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-30macvlan: delay the header check for dodgy packets into lower deviceJason Wang1-2/+3
We do header check twice for a dodgy packet. One is done before macvlan_start_xmit(), another is done before lower device's ndo_start_xmit(). The first one seems redundant so this patch tries to delay header check until a packet reaches its lower device (or macvtap) through always enabling NETIF_F_GSO_ROBUST for macvlan device. Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26macvlan: fix a race on port dismantle and possible skb leaksEric Dumazet1-2/+8
We need to cancel the work queue after rcu grace period, otherwise it can be rescheduled by incoming packets. We need to purge queue if some skbs are still in it. We can use __skb_queue_head_init() variant in macvlan_process_broadcast() Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 412ca1550cbec ("macvlan: Move broadcasts into a work queue") Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-10macvlan: optimize the receive pathjbaron@akamai.com1-5/+10
The netif_rx() call on the fast path of macvlan_handle_frame() appears to be there to ensure that we properly throttle incoming packets. However, it would appear as though the proper throttling is already in place for all possible ingress paths, and that the call is redundant. If packets are arriving from the physical NIC, we've already throttled them by this point. Otherwise, if they are coming via macvlan_queue_xmit(), it calls either 'dev_forward_skb()', which ends up calling netif_rx_internal(), or else in the broadcast case, we are throttling via macvlan_broadcast_enqueue(). The test results below are from off the box to an lxc instance running macvlan. Once the tranactions/sec stop increasing, the cpu idle time has gone to 0. Results are from a quad core Intel E3-1270 V2@3.50GHz box with bnx2x 10G card. for i in {10,100,200,300,400,500}; do super_netperf $i -H $ip -t TCP_RR; done Average of 5 runs. trans/sec trans/sec (3.17-rc7-net-next) (3.17-rc7-net-next + this patch) ---------- ---------- 208101 211534 (+1.6%) 839493 850162 (+1.3%) 845071 844053 (-.12%) 816330 819623 (+.4%) 778700 789938 (+1.4%) 735984 754408 (+2.5%) Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-10macvlan: pass 'bool' type to macvlan_count_rx()jbaron@akamai.com1-3/+3
Pass last argument to macvlan_count_rx() as the correct bool type. Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net: better IFF_XMIT_DST_RELEASE supportEric Dumazet1-1/+2
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29macvlan: add source modeMichael Braun1-3/+301
This patch adds a new mode of operation to macvlan, called "source". It allows one to set a list of allowed mac address, which is used to match against source mac address from received frames on underlying interface. This enables creating mac based VLAN associations, instead of standard port or tag based. The feature is useful to deploy 802.1x mac based behavior, where drivers of underlying interfaces doesn't allows that. Configuration is done through the netlink interface using e.g.: ip link add link eth0 name macvlan0 type macvlan mode source ip link add link eth0 name macvlan1 type macvlan mode source ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11 ip link set link dev macvlan0 type macvlan macaddr add 00:22:22:22:22:22 ip link set link dev macvlan0 type macvlan macaddr add 00:33:33:33:33:33 ip link set link dev macvlan1 type macvlan macaddr add 00:33:33:33:33:33 ip link set link dev macvlan1 type macvlan macaddr add 00:44:44:44:44:44 This allows clients with MAC addresses 00:11:11:11:11:11, 00:22:22:22:22:22 to be part of only VLAN associated with macvlan0 interface. Clients with MAC addresses 00:44:44:44:44:44 with only VLAN associated with macvlan1 interface. And client with MAC address 00:33:33:33:33:33 to be associated with both VLANs. Based on work of Stefan Gula <steweg@gmail.com> v8: last version of Stefan Gula for Kernel 3.2.1 v9: rework onto linux-next 2014-03-12 by Michael Braun add MACADDR_SET command, enable to configure mac for source mode while creating interface v10: - reduce indention level - rename source_list to source_entry - use aligned 64bit ether address - use hash_64 instead of addr[5] v11: - rebase for 3.14 / linux-next 20.04.2014 v12 - rebase for linux-next 2014-09-25 Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22macvlan: allow to enqueue broadcast pkt on virtual deviceNicolas Dichtel1-1/+2
Since commit 412ca1550cbe ("macvlan: Move broadcasts into a work queue"), the driver uses tx_queue_len of the master device as the limit of packets enqueuing. Problem is that virtual drivers have this value set to 0, thus all broadcast packets were rejected. Because tx_queue_len was arbitrarily chosen, I replace it with a static limit of 1000 (also arbitrarily chosen). CC: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Thibaut Collet <thibaut.collet@6wind.com> Suggested-by: Thibaut Collet <thibaut.collet@6wind.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-20net: allow macvlans to move to net namespaceFrancesco Ruggeri1-0/+1
I cannot move a macvlan interface created on top of a bonding interface to a different namespace: % ip netns add dummy0 % ip link add link bond0 mac0 type macvlan % ip link set mac0 netns dummy0 RTNETLINK answers: Invalid argument % The problem seems to be that commit f9399814927a ("bonding: Don't allow bond devices to change network namespaces.") sets NETIF_F_NETNS_LOCAL on bonding interfaces, and commit 797f87f83b60 ("macvlan: fix netdev feature propagation from lower device") causes macvlan interfaces to inherit its features from the lower device. NETIF_F_NETNS_LOCAL should not be inherited from the lower device by a macvlan. Patch tested on 3.16. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22macvlan: Allow setting multicast filter on all macvlan typesVlad Yasevich1-2/+8
Currently, macvlan code restricts multicast and unicast filter setting only to passthru devices. As a result, if a guest using macvtap wants to receive multicast traffic, it has to set IFF_ALLMULTI or IFF_PROMISC. This patch makes it possible to use the fdb interface to add multicast addresses to the filter thus allowing a guest to receive only targeted multicast traffic. CC: John Fastabend <john.r.fastabend@intel.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-15Revert "macvlan: simplify the structure port"David S. Miller1-5/+7
This reverts commit a188a54d11629bef2169052297e61f3767ca8ce5. It causes crashes ==================== [ 80.643286] BUG: unable to handle kernel NULL pointer dereference at 0000000000000878 [ 80.670103] IP: [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 80.691289] PGD 22c102067 PUD 235bf0067 PMD 0 [ 80.706611] Oops: 0002 [#1] SMP [ 80.717836] Modules linked in: macvlan nfsd lockd nfs_acl exportfs auth_rpcgss sunrpc oid_registry ioatdma ixgbe(-) mdio igb dca [ 80.757935] CPU: 37 PID: 6724 Comm: rmmod Not tainted 3.16.0-net-next-08-12-2014-FCoE+ #1 [ 80.785688] Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.03.0003.041920141333 04/19/2014 [ 80.820310] task: ffff880235a9eae0 ti: ffff88022e844000 task.ti: ffff88022e844000 [ 80.845770] RIP: 0010:[<ffffffff810832e4>] [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 80.875326] RSP: 0018:ffff88022e847b28 EFLAGS: 00010046 [ 80.893251] RAX: 0000000000037a6a RBX: 0000000000000878 RCX: 0000000000000000 [ 80.917187] RDX: ffff880235a9eae0 RSI: 0000000000000001 RDI: ffffffff810832db [ 80.941125] RBP: ffff88022e847b58 R08: 0000000000000000 R09: 0000000000000000 [ 80.965056] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022e847b70 [ 80.988994] R13: 0000000000000000 R14: ffff88022e847be8 R15: ffffffff81ebe440 [ 81.012929] FS: 00007fab90b07700(0000) GS:ffff88043f7a0000(0000) knlGS:0000000000000000 [ 81.040400] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 81.059757] CR2: 0000000000000878 CR3: 0000000235a42000 CR4: 00000000001407e0 [ 81.083689] Stack: [ 81.090739] ffff880235a9eae0 0000000000000878 ffff88022e847b70 0000000000000000 [ 81.116253] ffff88022e847be8 ffffffff81ebe440 ffff88022e847b98 ffffffff810847f1 [ 81.141766] ffff88022e847b78 0000000000000286 ffff880234200000 0000000000000000 [ 81.167282] Call Trace: [ 81.175768] [<ffffffff810847f1>] __cancel_work_timer+0x31/0x170 [ 81.195985] [<ffffffff8108494b>] cancel_work_sync+0xb/0x10 [ 81.214769] [<ffffffffa015ae68>] macvlan_port_destroy+0x28/0x60 [macvlan] [ 81.237844] [<ffffffffa015b930>] macvlan_uninit+0x40/0x50 [macvlan] [ 81.259209] [<ffffffff816bf6e2>] rollback_registered_many+0x1a2/0x2c0 [ 81.281140] [<ffffffff816bf81a>] unregister_netdevice_many+0x1a/0xb0 [ 81.302786] [<ffffffffa015a4ff>] macvlan_device_event+0x1ef/0x240 [macvlan] [ 81.326439] [<ffffffff8108a13d>] notifier_call_chain+0x4d/0x70 [ 81.346366] [<ffffffff8108a201>] raw_notifier_call_chain+0x11/0x20 [ 81.367439] [<ffffffff816bf25b>] call_netdevice_notifiers_info+0x3b/0x70 [ 81.390228] [<ffffffff816bf2a1>] call_netdevice_notifiers+0x11/0x20 [ 81.411587] [<ffffffff816bf6bd>] rollback_registered_many+0x17d/0x2c0 [ 81.433518] [<ffffffff816bf925>] unregister_netdevice_queue+0x75/0x110 [ 81.455735] [<ffffffff816bfb2b>] unregister_netdev+0x1b/0x30 [ 81.475094] [<ffffffffa0039b50>] ixgbe_remove+0x170/0x1d0 [ixgbe] [ 81.495886] [<ffffffff813512a2>] pci_device_remove+0x32/0x60 [ 81.515246] [<ffffffff814c75c4>] __device_release_driver+0x64/0xd0 [ 81.536321] [<ffffffff814c76f8>] driver_detach+0xc8/0xd0 [ 81.554530] [<ffffffff814c656e>] bus_remove_driver+0x4e/0xa0 [ 81.573888] [<ffffffff814c828b>] driver_unregister+0x2b/0x60 [ 81.593246] [<ffffffff8135143e>] pci_unregister_driver+0x1e/0xa0 [ 81.613749] [<ffffffffa005db18>] ixgbe_exit_module+0x1c/0x2e [ixgbe] [ 81.635401] [<ffffffff810e738b>] SyS_delete_module+0x15b/0x1e0 [ 81.655334] [<ffffffff8187a395>] ? sysret_check+0x22/0x5d [ 81.673833] [<ffffffff810abd2d>] ? trace_hardirqs_on_caller+0x11d/0x1e0 [ 81.696339] [<ffffffff8132bfde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 81.717985] [<ffffffff8187a369>] system_call_fastpath+0x16/0x1b [ 81.738199] Code: 00 48 83 3d 6e bb da 00 00 48 89 c2 0f 84 67 01 00 00 fa 66 0f 1f 44 00 00 49 89 14 24 e8 b5 4b 02 00 45 84 ed 0f 85 ac 00 00 00 <f0> 0f ba 2b 00 72 1d 31 c0 48 8b 5d d8 4c 8b 65 e0 4c 8b 6d e8 [ 81.807026] RIP [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 81.828468] RSP <ffff88022e847b28> [ 81.840384] CR2: 0000000000000878 [ 81.851731] ---[ end trace 9f6c7232e3464e11 ]--- ==================== This bug could be triggered by these steps: modprobe ixgbe ; modprobe macvlan ip link add link p96p1 address 00:1B:21:6E:06:00 macvlan0 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:01 macvlan1 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:02 macvlan2 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:03 macvlan3 type macvlan rmmod ixgbe Reported-by: "Keller, Jacob E" <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-01macvlan: Initialize vlan_features to turn on offload support.Vlad Yasevich1-0/+1
Macvlan devices do not initialize vlan_features. As a result, any vlan devices configured on top of macvlans perform very poorly. Initialize vlan_features based on the vlan features of the lower-level device. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+0
Conflicts: net/core/rtnetlink.c net/core/skbuff.c Both conflicts were very simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09net: force a list_del() in unregister_netdevice_many()Eric Dumazet1-1/+0
unregister_netdevice_many() API is error prone and we had too many bugs because of dangling LIST_HEAD on stacks. See commit f87e6f47933e3e ("net: dont leave active on stack LIST_HEAD") In fact, instead of making sure no caller leaves an active list_head, just force a list_del() in the callee. No one seems to need to access the list after unregister_netdevice_many() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05macvlan: Support bonding eventsVlad Yasevich1-0/+7
Bonding and team drivers generate specific events during failover that trigger switch updates. When a macvlan device is configured on top of bonding, we want switches to learn about the macvlan devices as well. This patch adds a handler to macvlan driver to propagate these events to all macvlan devices. We let the generic inetdev event handler do the work. This allows macvlan to operated correctly over active-backup mode bond. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03macvlan: add netpoll supportdingtianhong1-1/+65
Add netpoll support to macvlan devices. Based on the netpoll support in the 802.1q vlan code. Tested and macvlan could work well with netconsole. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03macvlan: fix the problem when mac address changes for passthru modedingtianhong1-12/+38
The macvlan dev should always have the same mac address like lowerdev when in the passthru mode, change the mac address alone will break the work mechanism, so when the lowerdev or macvlan mac address changes, we should propagate the changes to another dev. v1->v2: Allow macvlan dev to change mac address for passthru mode and propagate to lowerdev. v2->v3: Don't set the mac address to the lower dev's unicast address for passthru mode when mac address changes. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+14
Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-17macvlan: Fix lockdep warnings with stacked macvlan devicesVlad Yasevich1-2/+10
Macvlan devices try to avoid stacking, but that's not always successfull or even desired. As an example, the following configuration is perefectly legal and valid: eth0 <--- macvlan0 <---- vlan0.10 <--- macvlan1 However, this configuration produces the following lockdep trace: [ 115.620418] ====================================================== [ 115.620477] [ INFO: possible circular locking dependency detected ] [ 115.620516] 3.15.0-rc1+ #24 Not tainted [ 115.620540] ------------------------------------------------------- [ 115.620577] ip/1704 is trying to acquire lock: [ 115.620604] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.620686] but task is already holding lock: [ 115.620723] (&macvlan_netdev_addr_lock_key){+.....}, at: [<ffffffff815da5be>] dev_set_rx_mode+0x1e/0x40 [ 115.620795] which lock already depends on the new lock. [ 115.620853] the existing dependency chain (in reverse order) is: [ 115.620894] -> #1 (&macvlan_netdev_addr_lock_key){+.....}: [ 115.620935] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.620974] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621019] [<ffffffffa07296c3>] vlan_dev_set_rx_mode+0x53/0x110 [8021q] [ 115.621066] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621105] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621143] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b [ 115.621174] -> #0 (&vlan_netdev_addr_lock_key/1){+.....}: [ 115.621174] [<ffffffff810d4d43>] __lock_acquire+0x1773/0x1a60 [ 115.621174] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.621174] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621174] [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffffa0696d2a>] macvlan_set_mac_lists+0xca/0x110 [macvlan] [ 115.621174] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621174] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621174] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b [ 115.621174] other info that might help us debug this: [ 115.621174] Possible unsafe locking scenario: [ 115.621174] CPU0 CPU1 [ 115.621174] ---- ---- [ 115.621174] lock(&macvlan_netdev_addr_lock_key); [ 115.621174] lock(&vlan_netdev_addr_lock_key/1); [ 115.621174] lock(&macvlan_netdev_addr_lock_key); [ 115.621174] lock(&vlan_netdev_addr_lock_key/1); [ 115.621174] *** DEADLOCK *** [ 115.621174] 2 locks held by ip/1704: [ 115.621174] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815e6dbb>] rtnetlink_rcv+0x1b/0x40 [ 115.621174] #1: (&macvlan_netdev_addr_lock_key){+.....}, at: [<ffffffff815da5be>] dev_set_rx_mode+0x1e/0x40 [ 115.621174] stack backtrace: [ 115.621174] CPU: 3 PID: 1704 Comm: ip Not tainted 3.15.0-rc1+ #24 [ 115.621174] Hardware name: Hewlett-Packard HP xw8400 Workstation/0A08h, BIOS 786D5 v02.38 10/25/2010 [ 115.621174] ffffffff82339ae0 ffff880465f79568 ffffffff816ee20c ffffffff82339ae0 [ 115.621174] ffff880465f795a8 ffffffff816e9e1b ffff880465f79600 ffff880465b019c8 [ 115.621174] 0000000000000001 0000000000000002 ffff880465b019c8 ffff880465b01230 [ 115.621174] Call Trace: [ 115.621174] [<ffffffff816ee20c>] dump_stack+0x4d/0x66 [ 115.621174] [<ffffffff816e9e1b>] print_circular_bug+0x200/0x20e [ 115.621174] [<ffffffff810d4d43>] __lock_acquire+0x1773/0x1a60 [ 115.621174] [<ffffffff810d3172>] ? trace_hardirqs_on_caller+0xb2/0x1d0 [ 115.621174] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.621174] [<ffffffff815df49c>] ? dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621174] [<ffffffff815df49c>] ? dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffffa0696d2a>] macvlan_set_mac_lists+0xca/0x110 [macvlan] [ 115.621174] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621174] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621174] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff811e1db1>] ? mem_cgroup_bad_page_check+0x21/0x30 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff810d394c>] ? __lock_acquire+0x37c/0x1a60 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815ea169>] ? rtnl_newlink+0xe9/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff810d329d>] ? trace_hardirqs_on+0xd/0x10 [ 115.621174] [<ffffffff815e6dbb>] ? rtnetlink_rcv+0x1b/0x40 [ 115.621174] [<ffffffff815e6de0>] ? rtnetlink_rcv+0x40/0x40 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff8119d4af>] ? might_fault+0x5f/0xb0 [ 115.621174] [<ffffffff8119d4f8>] ? might_fault+0xa8/0xb0 [ 115.621174] [<ffffffff8119d4af>] ? might_fault+0x5f/0xb0 [ 115.621174] [<ffffffff815cb51e>] ? verify_iovec+0x5e/0xe0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff816faa0d>] ? __do_page_fault+0x11d/0x570 [ 115.621174] [<ffffffff810cfe9f>] ? up_read+0x1f/0x40 [ 115.621174] [<ffffffff816fab04>] ? __do_page_fault+0x214/0x570 [ 115.621174] [<ffffffff8120a10b>] ? mntput_no_expire+0x6b/0x1c0 [ 115.621174] [<ffffffff8120a0b7>] ? mntput_no_expire+0x17/0x1c0 [ 115.621174] [<ffffffff8120a284>] ? mntput+0x24/0x40 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b Fix this by correctly providing macvlan lockdep class. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16macvlan: simplify the structure portdingtianhong1-7/+5
The port->count was used to count the number of macvlan devs in the same port, but the list vlans could play the same role to do that, so free the port if the list vlans is empty and no need to use the parameter count. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14macvlan: Propagate lowerdev MTU changesdingtianhong1-0/+7
When the physical MTU changes we should ensure that all existing MACVLAN dev MTU do not exceed the new lowerdev MTU. This patch adds that propagation. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12macvlan: Don't propagate IFF_ALLMULTI changes on down interfaces.Peter Christensen1-2/+4
Clearing the IFF_ALLMULTI flag on a down interface could cause an allmulti overflow on the underlying interface. Attempting the set IFF_ALLMULTI on the underlying interface would cause an error and the log message: "allmulti touches root, set allmulti failed." Signed-off-by: Peter Christensen <pch@ordbogen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+0
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-01Revert "macvlan : fix checksums error when we are in bridge mode"Vlad Yasevich1-3/+0
This reverts commit 12a2856b604476c27d85a5f9a57ae1661fc46019. The commit above doesn't appear to be necessary any more as the checksums appear to be correctly computed/validated. Additionally the above commit breaks kvm configurations where one VM is using a device that support checksum offload (virtio) and the other VM does not. In this case, packets leaving virtio device will have CHECKSUM_PARTIAL set. The packets is forwarded to a macvtap that has offload features turned off. Since we use CHECKSUM_UNNECESSARY, the host does does not update the checksum and thus a bad checksum is passed up to the guest. CC: Daniel Lezcano <daniel.lezcano@free.fr> CC: Patrick McHardy <kaber@trash.net> CC: Andrian Nord <nightnord@gmail.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23macvlan: Fix leak and NULL dereference on error pathHerbert Xu1-4/+7
The recent patch that moved broadcasts to process context added a couple of bugs on the error path where we may dereference NULL or leak an skb. This patch fixes them. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-21macvlan: Move broadcasts into a work queueHerbert Xu1-23/+93
Currently broadcasts are handled in network RX context, where the packets are sent through netif_rx. This means that the number of macvlans will be constrained by the capacity of netif_rx. For example, setting up 4096 macvlans practically causes all broadcast packets to be dropped as the default netif_rx queue size simply can't handle 4096 skbs being stuffed into it all at once. Fundamentally, we need to ensure that the amount of work handled in each netif_rx backlog run is constrained. As broadcasts are anything but constrained, it either needs to be limited per run or moved to process context. This patch picks the second option and moves all broadcast handling bar the trivial case of packets going to a single interface into a work queue. Obviously there also needs to be a limit on how many broadcast packets we postpone in this way. I've arbitrarily chosen tx_queue_len of the master device as the limit (act_mirred also happens to use this parameter in a similar way). In order to ensure we don't exceed the backlog queue we will use netif_rx_ni instead of netif_rx for broadcast packets. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman1-2/+2
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+5
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-04macvlan: Add support for 'always_on' offload featuresVlad Yasevich1-2/+5
Macvlan currently inherits all of its features from the lower device. When lower device disables offload support, this causes macvlan to disable offload support as well. This causes performance regression when using macvlan/macvtap in bridge mode. It can be easily demonstrated by creating 2 namespaces using macvlan in bridge mode and running netperf between them: MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.00 1204.61 To restore the performance, we add software offload features to the list of "always_on" features for macvlan. This way when a namespace or a guest using macvtap initially sends a packet, this packet will not be segmented at macvlan level. It will only be segmented when macvlan sends the packet to the lower device. MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.00 5507.35 Fixes: 6acf54f1cf0a6747bac9fea26f34cfc5a9029523 (macvtap: Add support of packet capture on macvtap device.) Fixes: 797f87f83b60685ff8a13fa0572d2f10393c50d3 (macvlan: fix netdev feature propagation from lower device) CC: Florian Westphal <fw@strlen.de> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Jason Wang <jasowang@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+3
Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-15net: introduce netdev_alloc_pcpu_stats() for driversWANG Cong1-8/+1
There are many drivers calling alloc_percpu() to allocate pcpu stats and then initializing ->syncp. So just introduce a helper function for them. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 10:58:21 +0300