summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2015-02-06fm10k: Resolve compile warnings with W=1Matthew Vick2-6/+2
Fix two cases where variables are being set but not used. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh<Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06fm10k: Validate VLAN ID in fm10k_update_xc_addr_pfMatthew Vick1-5/+2
Currently, fm10k_update_xc_addr_pf has an issue where it does not properly drop the upper-most four bits of the VLAN ID due to type promotion. Resolve the issue not by masking off the bits, but by throwing an error if the VLAN ID is out-of-bounds. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06vxge: fix sparse warningLad, Prabhakar1-1/+1
this patch fixes following sparse warning: vxge-config.c:4640:30: warning: Using plain integer as NULL pointer Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06net/macb: fix sparse warningLad, Prabhakar1-2/+1
this patch fixes following sparse warning: macb.c:2038:26: warning: symbol 'gem_ethtool_ops' was not declared. Should it be static? Alongside drops exporting of gem_ethtool_ops as there is no need. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06net: bnx2x: fix sparse warningsLad, Prabhakar1-3/+3
this patch fixes following sparse warnings: bnx2x_main.c:9172:6: warning: symbol 'bnx2x_stop_ptp' was not declared. Should it be static? bnx2x_main.c:13321:6: warning: symbol 'bnx2x_register_phc' was not declared. Should it be static? bnx2x_main.c:14638:5: warning: symbol 'bnx2x_enable_ptp_packets' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06enic: enic_main: fix sparse warningsLad, Prabhakar1-3/+3
this patch fixes following sparse warnings: enic_main.c:92:28: warning: symbol 'mod_table' was not declared. Should it be static? enic_main.c:109:28: warning: symbol 'mod_range' was not declared. Should it be static? enic_main.c:1306:5: warning: symbol 'enic_busy_poll' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06enic: enic_ethtool: fix sparse warningLad, Prabhakar1-1/+1
this patch fixes following sparse warning: enic_ethtool.c:95:6: warning: symbol 'enic_intr_coal_set_rx' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06be2net: fix sparse warningLad, Prabhakar1-1/+1
this patch fixes following sparse warning: be_cmds.c:2750:5: warning: symbol 'be_cmd_set_qos' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06chelsio: cxgb4: fix sparse warningLad, Prabhakar1-1/+1
this patch fixes following sparse warning: cxgb4_dcb.c:25:6: warning: symbol 'dcb_ver_array' was not declared. Should it be static? Alongside making it const. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller13-30/+69
Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net: ep93xx_eth: Delete unnecessary checks before the function call "kfree"Markus Elfring1-4/+2
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05qlogic: Deletion of unnecessary checks before two function callsMarkus Elfring2-18/+9
The functions kfree() and vfree() perform also input parameter validation. Thus the test around their calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net: ethernet: ti/cpsw-common.c: fix sparse warningLad, Prabhakar1-0/+2
this patch fixes following sparse warning: cpsw-common.c:23:5: warning: symbol 'cpsw_am33xx_cm_get_macid' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05netxen: Delete an unnecessary check before the function call "kfree"Markus Elfring1-3/+1
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net: fec: Delete unnecessary checks before the function call "kfree"Markus Elfring1-5/+2
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05myri10ge: Delete an unnecessary check before the function call "kfree"Markus Elfring1-2/+1
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05qlcnic: Fix NAPI poll routine for Tx completionShahed Shaikh1-3/+24
After d75b1ade567f ("net: less interrupt masking in NAPI") driver's NAPI poll routine is expected to return exact budget value if it wants to be re-called. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Fixes: d75b1ade567f ("net: less interrupt masking in NAPI") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05cxgb4: Delete an unnecessary check before the function call "release_firmware"Markus Elfring1-2/+1
The release_firmware() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05cxgb4: Add low latency socket busy_poll supportHariprasad Shenai4-3/+174
cxgb_busy_poll, corresponding to ndo_busy_poll, gets called by the socket waiting for data. With busy_poll enabled, improvement is seen in latency numbers as observed by collecting netperf TCP_RR numbers. Below are latency number, with and without busy-poll, in a switched environment for a particular msg size: netperf command: netperf -4 -H <ip> -l 30 -t TCP_RR -- -r1,1 Latency without busy-poll: ~16.25 us Latency with busy-poll : ~08.79 us Based on original work by Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05amd-xgbe: Set RSS enablement based on hardware featuresLendacky, Thomas1-0/+1
The RSS support requires enablement based on the features reported by the hardware. The setting of this flag is missing. Add support to set the RSS enablement flag based on the reported hardware features. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05NetCP: Deletion of unnecessary checks before two function callsMarkus Elfring1-4/+2
The functions cpsw_ale_destroy() and of_dev_put() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05IBM-EMAC: Delete an unnecessary check before the function call "of_dev_put"Markus Elfring1-1/+1
The of_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05amd-xgbe: Adjust for zero-based traffic class countLendacky, Thomas1-1/+2
The number of traffic classes reported by the hardware is zero-based so increment the value returned to get an actual count. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net/mlx4_en: Notify TX Vlan offload changeIdo Shamay1-0/+4
Notify users when TX vlan offload feature changed with ethtool. Relevant command - ethtool -K <eth> txvlan on/off. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net/mlx4_en: Adjust RX frag strides to frag sizesIdo Shamay1-2/+3
This patch improves memory utilization and therefore the packets rate for special MTU's. Instead of setting the frag_stride to the maximal hard coded frag_size, use the actual frag_size that is set according to the MTU, when setting the stride of the last frag. So, for example, for MTU 1600, where the frag_size of the 2nd frag is 86, the frag_size is set to 128 instead of 4096. See below: Before: frag:0 - size:1536 prefix:0 stride:1536 frag:1 - size:86 prefix:1536 stride:4096 frag 0 allocator: - size:32768 frags:21 frag 1 allocator: - size:32768 frags:8 After: frag:0 - size:1536 prefix:0 stride:1536 frag:1 - size:86 prefix:1536 stride:128 frag 0 allocator: - size:32768 frags:21 frag 1 allocator: - size:32768 frags:256 Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net/mlx4_en: Print page allocator informationIdo Shamay1-0/+4
After Initialization of page_alloc, print actual allocated page size and number of frags it contains. prints is done only when drv message level is set on the interface. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net/mlx5_core: Move to use hex PCI device IDsOr Gerlitz1-6/+6
Align the IDs in the code with the modinfo, lspci -n, etc tools outputs. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net/mlx4_core: Fix misleading debug print on CQE stride supportOr Gerlitz1-1/+2
We do support cache line sizes of 32 and 64 bytes without activating the CQE stride feature. Fix a misleading print saying that these cache line sizes aren't supported. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net/mlx4: mlx4_config_dev_retrieval() - Initialize struct config_dev before ↵Maor Gottlieb1-1/+1
using Add Initialization to struct config_dev before filling and using it. Fix to warning: warning: config_dev.rx_checksum_val may be used uninitialized in this function Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net/mlx4_core: Fix mpt_entry initialization in mlx4_mr_rereg_mem_write()Maor Gottlieb2-9/+6
a) Previously, mlx4_mr_rereg_write filled the MPT's start and length with the old MPT's values. Fixing the initialization to take the new start and length. b) In addition access flags in mpt_status were initialized instead of status due to bad boolean operation. Fixing the operation. c) Initialization of pd_slave caused a protection error. Fix - removing this initialization. d) In resource_tracker.c: Fixing vf encoding to be one-based. Fixes: e630664c ('mlx4_core: Add helper functions to support MR re-registration') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net/mlx4_en: Port aggregation configurationMoni Shoua3-0/+189
Capture NETDEV events generated by the bonding driver and based on that make decisions of how to configure port aggregation in the mlx4 core driver. This includes setting the V2P port table and re-creating the interested interfaces in bonded/non-bonded mode. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net/mlx4_core: Port aggregation upper layer interfaceMoni Shoua6-2/+157
Supply interface functions to bond and unbond ports of a mlx4 internal interfaces. Example for such an interface is the one registered by the mlx4 IB driver under RoCE. There are 1. Functions to go in/out to/from bonded mode 2. Function to remap virtual ports to physical ports The bond_mutex prevents simultaneous access to data that keep status of the device in bonded mode. The upper mlx4 interface marks to the mlx4 core module that they want to be subject for such bonding by setting the MLX4_INTFF_BONDING flag. Interface which goes to/from bonded mode is re-created. The mlx4 Ethernet driver does not set this flag when registering the interface, the IB driver does. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net/mlx4_core: Port aggregation low level interfaceMoni Shoua2-5/+60
Implement the hardware interface required for port aggregation. 1. Disable RX port check on receive - don't perform a validity check that matches to QP's port and the port where the packet is received. 2. Virtual to physical port remap - configure virtual to physical port mapping. Port remap capability for virtual functions. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05tlan: msecs_to_jiffies convrsionNicholas Mc Guire1-1/+1
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). As there is a discrepancy between the code and the comments this is in a separate patch. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05tlan: use msecs_to_jiffies for conversionNicholas Mc Guire1-6/+6
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05gianfar: correct the bad expression while writing bit-patternSanjeev Sharma1-1/+1
This patch correct the bad expression while writing the bit-pattern from software's buffer to hardware registers. Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05net: fs_enet: Implement NETIF_F_SG featureLEROY Christophe2-30/+66
Freescale ethernet controllers have the capability to re-assemble fragmented data into a single ethernet frame. This patch uses this capability and implements NETIP_F_SG feature into the fs_enet ethernet driver. On a MPC885, I get 53% performance improvement on a ftp transfer of a 15Mb file: * Without the patch : 2,8 Mbps * With the patch : 4,3 Mbps Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than ↵Jack Morgenstein1-1/+2
80 VFs Commit de966c592802 (net/mlx4_core: Support more than 64 VFs) was meant to allow up to 126 VFs. However, due to leaving MLX4_MFUNC_MAX too low, using more than 80 VFs resulted in memory corruptions (and Oopses) when more than 80 VFs were requested. In addition, the number of slaves was left too high. This commit fixes these issues. Fixes: de966c592802 ("net/mlx4_core: Support more than 64 VFs") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03cxgb4 : Improve IEEE DCBx support, other minor open-lldp fixesAnish Bhatt2-2/+107
* Add support for IEEE ets & pfc api. * Fix bug that resulted in incorrect bandwidth percentage being returned for CEE peers * Convert pfc enabled info from firmware format to what dcbnl expects before returning Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03net/tulip: don't warn about unknown ARM architectureArnd Bergmann1-1/+1
ARM has 32-byte cache lines, which according to the comment in the init registers function seems to work best with the default value of 0x4800 that is also used on sparc and parisc. This adds ARM to the same list, to use that default but no longer warn about it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03net: hip04: add missing MODULE_LICENSEArnd Bergmann1-0/+1
The hip04 ethernet driver causes a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/hisilicon/hip04_eth.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03sunvnet: set queue mapping when doing packet copiesDavid L Stevens1-0/+1
This patch fixes a bug where vnet_skb_shape() didn't set the already-selected queue mapping when a packet copy was required. This results in using the wrong queue index for stops/starts, hung tx queues and watchdog timeouts under heavy load. Signed-off-by: David L Stevens <david.stevens@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03qlge: Fix qlge_update_hw_vlan_features to handle if interface is downMarcelo Leitner1-10/+16
Currently qlge_update_hw_vlan_features() will always first put the interface down, then update features and then bring it up again. But it is possible to hit this code while the adapter is down and this causes a non-paired call to napi_disable(), which will get stuck. This patch fixes it by skipping these down/up actions if the interface is already down. Fixes: a45adbe8d352 ("qlge: Enhance nested VLAN (Q-in-Q) handling.") Cc: Harish Patil <harish.patil@qlogic.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net: rocker: Add support for retrieving port level statisticsDavid Ahern2-0/+155
Add support for retrieving port level statistics from device. Hook is added for ethtool's stats functionality. For example, $ ethtool -S eth3 NIC statistics: rx_packets: 12 rx_bytes: 2790 rx_dropped: 0 rx_errors: 0 tx_packets: 8 tx_bytes: 728 tx_dropped: 0 tx_errors: 0 Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02rocker: set feature NETIF_F_HW_SWITCH_OFFLOADRoopa Prabhu1-1/+2
This patch sets the NETIF_F_HW_SWITCH_OFFLOAD feature flag on rocker ports Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02bridge: add flags argument to ndo_bridge_setlink and ndo_bridge_dellinkRoopa Prabhu3-3/+4
bridge flags are needed inside ndo_bridge_setlink/dellink handlers to avoid another call to parse IFLA_AF_SPEC inside these handlers This is used later in this series Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02stmmac: DMA threshold mode or SF mode can be different among multiple device ↵Sonic Zhang1-2/+3
instance - In tx_hard_error_bump_tc interrupt, tc should be bumped only when current device instance is in DMA threshold mode. Check per device xstats.threshold other than global tc. - Set per device xstats.threshold to SF_DMA_MODE when current device instance is set to SF mode. v2-changes: - fix ident style Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02cxgb4: Remove preprocessor check for CONFIG_CXGB4_DCBHariprasad Shenai1-1/+23
In commit dc9daab226aa ("cxgb4: Added support in debugfs to dump sge_qinfo") a preprocessor check for CONFIG_CXGB4_DCB got added, which should have been CONFIG_CHELSIO_T4_DCB. After adding the right preprocessor, build fails due to missing function ethqset2pinfo. Fixing that as well. V2: Updated description since the patch also fixes build failure Reported-by: Paul Bolle <pebolle@tiscal.nl> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-01drivers: net: cpsw: make cpsw_ale.c a module to allow re-use on KeystoneKaricheri, Muralidharan5-7/+59
NetCP on Keystone has cpsw ale function similar to other TI SoCs and this driver is re-used. To allow both ti cpsw and keystone netcp to re-use the driver, convert the cpsw ale to a module and configure it through Kconfig option CONFIG_TI_CPSW_ALE. Currently it is statically linked to both TI CPSW and NetCP and this causes issues when the above drivers are built as dynamic modules. This patch addresses this issue While at it, fix the Makefile and code to build both netcp_core and netcp_ethss as dynamic modules. This is needed to support arm allmodconfig. This also requires exporting of API calls provided by netcp_core so that both the above can be dynamic modules. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31drivers: net: xgene: fix: Out of order descriptor bytes readIyappan Subramanian1-0/+2
This patch fixes the following kernel crash, WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_input.c:3079 tcp_clean_rtx_queue+0x658/0x80c() Call trace: [<fffffe0000096b7c>] dump_backtrace+0x0/0x184 [<fffffe0000096d10>] show_stack+0x10/0x1c [<fffffe0000685ea0>] dump_stack+0x74/0x98 [<fffffe00000b44e0>] warn_slowpath_common+0x88/0xb0 [<fffffe00000b461c>] warn_slowpath_null+0x14/0x20 [<fffffe00005b5c1c>] tcp_clean_rtx_queue+0x654/0x80c [<fffffe00005b6228>] tcp_ack+0x454/0x688 [<fffffe00005b6ca8>] tcp_rcv_established+0x4a4/0x62c [<fffffe00005bf4b4>] tcp_v4_do_rcv+0x16c/0x350 [<fffffe00005c225c>] tcp_v4_rcv+0x8e8/0x904 [<fffffe000059d470>] ip_local_deliver_finish+0x100/0x26c [<fffffe000059dad8>] ip_local_deliver+0xac/0xc4 [<fffffe000059d6c4>] ip_rcv_finish+0xe8/0x328 [<fffffe000059dd3c>] ip_rcv+0x24c/0x38c [<fffffe0000563950>] __netif_receive_skb_core+0x29c/0x7c8 [<fffffe0000563ea4>] __netif_receive_skb+0x28/0x7c [<fffffe0000563f54>] netif_receive_skb_internal+0x5c/0xe0 [<fffffe0000564810>] napi_gro_receive+0xb4/0x110 [<fffffe0000482a2c>] xgene_enet_process_ring+0x144/0x338 [<fffffe0000482d18>] xgene_enet_napi+0x1c/0x50 [<fffffe0000565454>] net_rx_action+0x154/0x228 [<fffffe00000b804c>] __do_softirq+0x110/0x28c [<fffffe00000b8424>] irq_exit+0x8c/0xc0 [<fffffe0000093898>] handle_IRQ+0x44/0xa8 [<fffffe000009032c>] gic_handle_irq+0x38/0x7c [...] Software writes poison data into the descriptor bytes[15:8] and upon receiving the interrupt, if those bytes are overwritten by the hardware with the valid data, software also reads bytes[7:0] and executes receive/tx completion logic. If the CPU executes the above two reads in out of order fashion, then the bytes[7:0] will have older data and causing the kernel panic. We have to force the order of the reads and thus this patch introduces read memory barrier between these reads. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 21:22:52 +0300