summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic/qede
AgeCommit message (Collapse)AuthorFilesLines
2016-06-04qed: Revisit chain implementationYuval Mintz1-2/+4
RoCE driver is going to need a 32-bit chain [current chain implementation for qed* currently supports only 16-bit producer/consumer chains]. This patch adds said support, as well as doing other slight tweaks and modifications to qed's chain API. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03qed: Utilize FW 8.10.3.0Yuval Mintz2-10/+8
The New QED firmware contains several fixes, including: - Wrong classification of packets in 4-port devices. - Anti-spoof interoperability with encapsulated packets. - Tx-switching of encapsulated packets. It also slightly improves Tx performance of the device. In addition, this firmware contains the necessary logic for supporting iscsi & rdma, for which we plan on pushing protocol drivers in the imminent future. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-26qede: Don't expose self-test for VFsYuval Mintz1-1/+4
PFs and VFs differ in their registered ethtool operations, but they're using a common function for get_sset_count(). As a result, `ethtool -i' for a VF would indicate it supports selftest, although that's not the case. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-26qede: Reload on GRO changesYuval Mintz1-0/+24
Since driver is using a FW-based GRO implementation, this has some effects on its ability to cope with GRO enablement/disablement. As a result, driver must perform an inner-reload as a result of a state change in the offload configuration of said feature. [Failure to do so means network stack would continue to receive aggregated packets even though user requested the feature to be disabled]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-26qede: Fix VF minimum BW settingYuval Mintz1-1/+1
VF is currently ignoring the minimum provided by the API, mistakenly using the maximum for minimum as well. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-4/+3
Pull networking fixes and more updates from David Miller: 1) Tunneling fixes from Tom Herbert and Alexander Duyck. 2) AF_UNIX updates some struct sock bit fields with the socket lock, whereas setsockopt() sets overlapping ones with locking. Seperate out the synchronized vs. the AF_UNIX unsynchronized ones to avoid corruption. From Andrey Ryabinin. 3) Mount BPF filesystem with mount_nodev rather than mount_ns, from Eric Biederman. 4) A couple kmemdup conversions, from Muhammad Falak R Wani. 5) BPF verifier fixes from Alexei Starovoitov. 6) Don't let tunneled UDP packets get stuck in socket queues, if something goes wrong during the encapsulation just drop the packet rather than signalling an error up the call stack. From Hannes Frederic Sowa. 7) SKB ref after free in batman-adv, from Florian Westphal. 8) TCP iSCSI, ocfs2, rds, and tipc have to disable BH in it's TCP callbacks since the TCP stack runs pre-emptibly now. From Eric Dumazet. 9) Fix crash in fixed_phy_add, from Rabin Vincent. 10) Fix length checks in xen-netback, from Paul Durrant. 11) Fix mixup in KEY vs KEYID macsec attributes, from Sabrina Dubroca. 12) RDS connection spamming bug fixes from Sowmini Varadhan * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits) net: suppress warnings on dev_alloc_skb uapi glibc compat: fix compilation when !__USE_MISC in glibc udp: prevent skbs lingering in tunnel socket queues bpf: teach verifier to recognize imm += ptr pattern bpf: support decreasing order in direct packet access net: usb: ch9200: use kmemdup ps3_gelic: use kmemdup net:liquidio: use kmemdup bpf: Use mount_nodev not mount_ns to mount the bpf filesystem net: cdc_ncm: update datagram size after changing mtu tuntap: correctly wake up process during uninit intel: Add support for IPv6 IP-in-IP offload ip6_gre: Do not allow segmentation offloads GRE_CSUM is enabled with FOU/GUE RDS: TCP: Avoid rds connection churn from rogue SYNs RDS: TCP: rds_tcp_accept_worker() must exit gracefully when terminating rds-tcp net: sock: move ->sk_shutdown out of bitfields. ipv6: Don't reset inner headers in ip6_tnl_xmit ip4ip6: Support for GSO/GRO ip6ip6: Support for GSO/GRO ipv6: Set features for IPv6 tunnels ...
2016-05-20qede: Fix DMA address APIs usageManish Chopra1-4/+3
Driver incorrectly uses dma_unmap_addr_set() to set a variable which is in truth a dma_addr_t [i.e not defined using DEFINE_DMA_UNMAP_ADDR()] and is being used by the driver flows other than unmapping physical addresses. This patch fixes driver fastpath where CONFIG_NEED_DMA_MAP_STATE is not set. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20mm: rename _count, field of the struct page, to _refcountJoonsoo Kim1-2/+2
Many developers already know that field for reference count of the struct page is _count and atomic type. They would try to handle it directly and this could break the purpose of page reference count tracepoint. To prevent direct _count modification, this patch rename it to _refcount and add warning message on the code. After that, developer who need to handle reference count will find that field should not be accessed directly. [akpm@linux-foundation.org: fix comments, per Vlastimil] [akpm@linux-foundation.org: Documentation/vm/transhuge.txt too] [sfr@canb.auug.org.au: sync ethernet driver changes] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Manish Chopra <manish.chopra@qlogic.com> Cc: Yuval Mintz <yuval.mintz@qlogic.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20mm/page_ref: use page_ref helper instead of direct modification of _countJoonsoo Kim1-1/+1
page_reference manipulation functions are introduced to track down reference count change of the page. Use it instead of direct modification of _count. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-12qed*: Tx-switching configurationYuval Mintz1-1/+23
Device should be configured by default to VEB once VFs are active. This changes the configuration of both PFs' and VFs' vports into enabling tx-switching once sriov is enabled. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed*: support ndo_get_vf_configYuval Mintz1-0/+12
Allows the user to view the VF configuration by observing the PF's device. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed*: IOV support spoof-checkingYuval Mintz1-0/+11
Add support in `ndo_set_vf_spoofchk' for allowing PF control over its VF spoof-checking configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed*: IOV link controlYuval Mintz1-0/+26
This adds support in 2 ndo that allow PF to tweak the VF's view of the link - `ndo_set_vf_link_state' to allow it a view independent of the PF's, and `ndo_set_vf_rate' which would allow the PF to limit the VF speed. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed*: Support forced MACYuval Mintz1-0/+31
Allows the PF to enforce the VF's mac. i.e., by using `ip link ... vf <x> mac <value>'. While a MAC is forced, PF would prevent the VF from configuring any other MAC. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed*: Support PVID configurationYuval Mintz1-0/+18
This adds support for PF control over the VF vlan configuration. I.e., `ip link ... vf <x> vlan <vid>' should now be supported. 1. <vid> != 0 => VF receives [unknowingly] only traffic tagged by <vid> and tags all outgoing traffic sent by VF with <vid>. 2. <vid> == 0 ==> Remove the pvid configuration, reverting to previous. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qede: Add VF supportYuval Mintz3-9/+90
Adding a PCI callback for `sriov_configure' and a new PCI device id for the VF [+ Some minor changes to accomodate differences between PF and VF at the qede]. Following this, VF creation should be possible and the entire subset of existing PF functionality that's allow to VFs should be supported. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12qed: Introduce VFsYuval Mintz1-4/+9
This adds the qed VFs for the first time - The vfs are limited functions, with a very different PCI bar structure [when compared with PFs] to better impose the related security demands associated with them. This patch includes the logic neccesary to allow VFs to successfully probe [without actually adding the ability to enable iov]. This includes diverging all the flows that would occur as part of the pci probe of the driver, preventing VF from accessing registers/memories it can't and instead utilize the VF->PF channel to query the PF for needed information. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+3
In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09qede: uninitialized variable in qede_start_xmit()Dan Carpenter1-1/+1
"data_split" was never set to false. It's just uninitialized. Fixes: 2950219d87b0 ('qede: Add basic network device support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06qede: prevent chip hang when increasing channelsSudarsana Reddy Kalluru1-4/+2
qede requires qed to provide enough resources to accommodate 16 combined channels, but that upper-bound isn't actually being enforced by it. Instead, qed inform back to qede how many channels can be opened based on available resources - but that calculation doesn't really take into account the resources requested by qede; Instead it considers other FW/HW available resources. As a result, if a user would increase the number of channels to more than 16 [e.g., using ethtool] the chip would hang. This change increments the resources requested by qede to 64 combined channels instead of 16; This value is an upper bound on the possible available channels [due to other FW/HW resources]. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02qede: add implementation for internal loopback test.Sudarsana Reddy Kalluru3-4/+242
This patch adds the qede implementation for internal loopback test. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02qede: add support for selftests.Sudarsana Reddy Kalluru1-1/+55
This patch adds the qede ethtool support for the following tests: - interrupt test - memory test - register test - clock test Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25qed*: Conditions for changing linkYuval Mintz1-4/+10
There's some inconsistency in current logic determining whether the link settings of a given interface can be changed; I.e., in all modes other than the so-called `deault' mode the interfaces are forbidden from changing the configuration - but even this rule is not applied to all user APIs that may change the configuration. Instead, let the core-module [qed] decide whether an interface can change the configuration by supporting a new API function. We also revise the current rule, allowing all interfaces to change their configurations while laying the infrastructure for future modes where an interface would be blocked from making such a configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25qede: Add support for ethtool private flagsYuval Mintz1-0/+23
Adds a getter for the interfaces private flags. The only parameter currently supported is whether the interface is a coupled function [required for supporting 100g]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25qed*: Align statistics namesYuval Mintz3-30/+39
There's a difference in statsitics' names starting at qed and propagating to qede, where egress counters indicate ranges while ingress counters indiciate high-end. Align all statistcs to follow the same conventions - name indicates range. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-57/+100
Conflicts were two cases of simple overlapping changes, nothing serious. In the UDP case, we need to add a hlist_add_tail_rcu() to linux/rculist.h, because we've moved UDP socket handling away from using nulls lists. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix single MTU sized packet from firmware GRO flowManish Chopra1-0/+13
In firmware assisted GRO flow there could be a single MTU sized segment arriving due to firmware aggregation timeout/last segment in an aggregation flow, which is not expected to be an actual gro packet. So If a skb has zero frags from the GRO flow then simply push it in the stack as non gso skb. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix setting Skb network headerManish Chopra1-2/+2
Skb's network header needs to be set before extracting IPv4/IPv6 headers from it. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix various memory allocation error flows for fastpathManish Chopra1-55/+85
This patch handles memory allocation failures for fastpath gracefully in the driver. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-16qede: Add fastpath support for tunnelingManish Chopra2-10/+92
This patch enables netdev tunneling features and adds TX/RX fastpath support for tunneling in driver. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-16qed/qede: Add GENEVE tunnel slowpath configuration supportManish Chopra2-0/+55
This patch enables GENEVE tunnel on the adapter and add support for driver hooks to configure UDP ports for GENEVE tunnel offload to be performed by the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-16qed/qede: Add VXLAN tunnel slowpath configuration supportManish Chopra2-2/+66
This patch enables VXLAN tunnel on the adapter and add support for driver hooks to configure UDP ports for VXLAN tunnel offload to be performed by the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qed* - bump driver versions to 8.7.1.20Yuval Mintz1-2/+2
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qede: add Rx flow hash/indirection support.Sudarsana Reddy Kalluru3-10/+283
Adds support for the following via ethtool: - UDP configuration of RSS based on 2-tuple/4-tuple. - RSS hash key. - RSS indirection table. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14qed*: remove version dependencyRahul Verma2-12/+1
Inbox drivers don't need versioning scheme in order to guarantee compatibility, as both qed and qede are compiled from same codebase. Signed-off-by: Rahul Verma <rahul.verma@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11qede: Fix net-next "make ARCH=x86_64"Manish Chopra1-1/+4
'commit 55482edc25f0606851de42e73618f813f310d009 ("qede: Add slowpath/fastpath support and enable hardware GRO")' introduces below error when compiling net-next with "make ARCH=x86_64" drivers/built-in.o: In function `qede_rx_int': qede_main.c:(.text+0x6101a0): undefined reference to `tcp_gro_complete' Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07qede: Add slowpath/fastpath support and enable hardware GROManish Chopra2-1/+388
This patch configures hardware to use GRO and adds support for fastpath APIs to handle HW aggregated packets. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07qed/qede: Add infrastructure support for hardware GROManish Chopra1-7/+10
This patch adds mainly structures and APIs prototype changes in order to give support for qede slowpath/fastpath support for the same. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26qed, qede: rebrand module descriptionYuval Mintz1-3/+3
Drop the `QL4xxx 40G/100G' and use `FastLinQ 4xxxx' instead. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26qede: Don't report link change needlesslyYuval Mintz1-6/+10
There are several corner cases where driver might get a 2nd notification about the same link change. Don't log any additional changes if the physical carrier is already reported as it should. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26qede: Linearize SKBs when neededYuval Mintz1-5/+33
There's a corner-case in HW where an SKB queued for transmission that contains too many frags will cause FW to assert. This patch solves this by linearizing the SKB if necessary. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26qede: Change pci DID for 10g deviceYuval Mintz1-1/+1
The device ID for the 10g module has changed. Populate the pci_ids table accordingly. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-22qed,qede: Bump driver versions to 8.7.0.0Yuval Mintz1-1/+1
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19qede: Add vlan filtering offload supportSudarsana Reddy Kalluru2-1/+286
Device would start receiving only vlan-tagged traffic with tags matching that of one of the configured vlan IDs, unless: - Device is expliicly placed in PROMISC mode. - Device exhausts its vlan filter credits. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18qed/qede: use 8.7.3.0 FW.Yuval Mintz3-93/+185
This patch moves the qed* driver into utilizing the 8.7.3.0 FW. This new FW is required for a lot of new SW features, including: - Vlan filtering offload - Encapsulation offload support - HW ingress aggregations As well as paving the way for the possibility of adding storage protocols in the future. V2: - Fix kbuild test robot error/warnings. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02qede: Add support for {get, set}_pauseparamSudarsana Kalluru1-0/+60
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02qede: Add support for nway_resetSudarsana Kalluru1-0/+25
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02qede: Add support for set_phys_idSudarsana Kalluru1-0/+29
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02qede: Add support for {get, set}_ringparamSudarsana Kalluru2-2/+46
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02qede: Add support for {get, set}_channelsSudarsana Kalluru3-2/+59
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>